FTP bursting is not working for a particular server

Hi All,
I am using BIP 10.1.3.4
I have a strange problem
In my company there are 2 environment
development and production
I have configured a FTP location in both the environment.But the report ftp bursting is working but in Production it is not working.
Is there any other way of checking settings.
Please suggest.
Thanks

Hi All,
I enabled the logging in BI publisher and found the following error in log file.
Can you please suggest
[120711_182041240][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Courier closed.
[120711_182042353][oracle.apps.xdo.template.rtf.FOTemplate][STATEMENT] xsl1.0-compatibility is set to false in configuration ,xdk11g wrapper is off
[120711_182043190][][STATEMENT] Logger.init(): *** DEBUG MODE IS ON. ***
[120711_182043190][][STATEMENT] Logger.init(): LogDir=/applic/oracle/product/10.1.3/OracleAS_BIP_1/xmldebug
[120711_182043190][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor constructor is called.
[120711_182044031][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor has been initialized without default config.
[120711_182044032][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setLocale is called with 'en-AU'.
[120711_182044032][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setTemplate(String) is called with '/applic/oracle/product/10.1.3/OracleAS_BI
P_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xdo2.tmp'.
[120711_182044034][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setData(String) is called with '/applic/oracle/product/10.1.3/OracleAS_BIP_1/
j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xdo0.tmp'.
[120711_182044056][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setOutput(String)is called with '/applic/oracle/product/10.1.3/OracleAS_BIP_1
/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xmlp17031tmp_85900001_1.xls'.
[120711_182044057][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setOutputFormat(byte)is called with ID=4.
[120711_182046652][oracle.apps.xdo.template.FOProcessor][STATEMENT] Start Memory: max=989MB, total=495MB, free=448MB
[120711_182046652][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.generate() called.
[120711_182046653][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_out_ab1f6.out' is created.
[120711_182046654][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_data_1_.xml' is created.
[120711_182046998][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_data_1_.xsl' is created.
[120711_182047052][oracle.apps.xdo.template.FOProcessor][STATEMENT] createFO(Object, Object) is called.
[120711_182047156][][STATEMENT] WARNING: Found undetermined AttrKey: style-name
[120711_182052743][oracle.apps.xdo.common.xml.XSLT10gR1][STATEMENT] Oracle XML Developers Kit 10.1.0.5.0 - Production
[120711_182052746][oracle.apps.xdo.common.xml.XSLT10gR1][STATEMENT] Scalable Feature Disabled
[120711_182058312][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058313][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058315][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058316][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058318][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058319][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058321][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058321][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058323][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058323][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058325][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182221400][][ERROR] Invalid XSD string: 25-Sep-2011
[120711_182221401][][ERROR] Invalid XSD string: 27-Nov-2011
[120711_182221401][][ERROR] Invalid XSD string: 28-Aug-2011
[120711_182221402][][ERROR] Invalid XSD string: 31-Jul-2011
[120711_182221490][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182216594_fo_fo_1_.fo' is created.
[120711_182221514][][PROCEDURE] XSL-T time used: 4730 msecs
[120711_182221514][oracle.apps.xdo.template.FOProcessor][STATEMENT] Calling FOProcessingEngine.process()
[120711_182221514][][STATEMENT] Using optimized xslt
[120711_182221518][][STATEMENT] Temporary file created: /var/tmp/xdo8wXFrbYzan17047.tmp
[120711_182221518][][STATEMENT] [ HTML GENERATOR ]---------------------------------------------
[120711_182221518][][STATEMENT] XDO version = Oracle BI Publisher 10.1.3.4.1
[120711_182221518][][STATEMENT] java.home = /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre
[120711_182221519][][STATEMENT] XDO_TOP = null
[120711_182221519][][STATEMENT] Config Path = null
[120711_182221519][][STATEMENT] Debug Cfg Path= /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre/lib/xdodebug.cfg
[120711_182221519][][STATEMENT] Font dir = /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre/lib/fonts/
[120711_182221519][][STATEMENT] Locale = en-AU
[120711_182221520][][STATEMENT] [ HTML GENERATOR PROPERTIES ]----------------------------------
[120711_182221520][][STATEMENT] fo-image-handling-ver=5.5
[120711_182221520][][STATEMENT] html-css-base-uri=
[120711_182221521][][STATEMENT] html-css-dir=null(not set)
[120711_182221521][][STATEMENT] html-css-embedding=embed-to-header
[120711_182221521][][STATEMENT] html-image-base-uri=
[120711_182221521][][STATEMENT] html-image-dir=/applic/oracle/product/10.1.3/OracleAS_BIP_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp/120711_18202
8372
[120711_182221521][][STATEMENT] html-output-body-only=false
[120711_182221522][][STATEMENT] html-output-charset=UTF-8
[120711_182221522][][STATEMENT] html-output-width-in-percentage=false
[120711_182221522][][STATEMENT] html-outputtype=pseudo-excel
[120711_182221522][][STATEMENT] html-replace-smartquotes=true
[120711_182221522][][STATEMENT] html-show-footer=true
[120711_182221523][][STATEMENT] html-show-header=true
[120711_182221523][][STATEMENT] html-suppressed-line-height=false
[120711_182221523][][STATEMENT] make-accessible=false
[120711_182221523][][STATEMENT] system-temp-dir=/var/tmp/
[120711_182221523][][STATEMENT] ------------------------------------------------------
[120711_182222050][][STATEMENT] Rendering page [1]
[120711_182222117][oracle.apps.xdo.common.font.FontFactory$FontDef][STATEMENT] Type1 font created: Helvetica
[120711_182226564][][STATEMENT] Phase2 time used: 4514ms
[120711_182227573][][STATEMENT] Continue rendering page [1]
[120711_182231893][][PROCEDURE] FO+Gen time used: 10378 msecs
[120711_182231893][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) is called.
[120711_182231894][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) done. All inputs are cleared.
[120711_182231894][oracle.apps.xdo.template.FOProcessor][STATEMENT] End Memory: max=989MB, total=495MB, free=36MB
[120711_182231927][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] initConfig(): loading default properties :{}
[120711_182231928][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :ftp
[120711_182231928][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[120711_182231930][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] java.lang.NullPointerException
at oracle.apps.xdo.batch.DeliveryHelper.getFtpDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.DeliveryHelper.addRequest(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.addDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.submitEnterpriseDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2055)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:371)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
[120711_182231930][oracle.apps.xdo.delivery.ftp.FTPDeliveryRequest][STATEMENT] submit(): Called
[120711_182231931][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] oracle.apps.xdo.delivery.DeliveryException: Document file or input stream is not set.
at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(Unknown Source)
at oracle.apps.xdo.batch.DeliveryHelper.submitRequests(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.submitEnterpriseDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2055)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:371)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
[120711_182231933][][STATEMENT] Default write connection pool max:20, min:10, total:10, available:8
[120711_182232025][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[120711_182232027][][STATEMENT] /applic/oracle/product/10.1.3/OracleAS_BIP_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372 deleted s
uccessfully...
[120711_182232028][][STATEMENT] [ID:11401] Time elapsed for bursting : 136107, time from beggining : 136215
[120711_182232028][][STATEMENT] [ID:11401] Time elapsed for notification : 0, time from beggining : 136215
[120711_182232029][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:11401] Scheduler finished the job. Exiting...
Thanks & Regards

Similar Messages

Broadcasting Email Bursting option not working for different mprv

Hi BW experts,
I am facing an issue with Broadcaster settings wherein I am using Email Bursting option.
My setup is like following :
I am using info object ZHRLVL to store hierarchy levels within an organization.
ZHRLVL has an attribute namely email address(E1) which contains the email ids of various managers.
The info object ZHRLVL is included in 2 Multiproviders namely M1 and M2.
email address(E1) is enabled as navigational attribute and in all reports based on M1 and M2 there is a user input variable available for the same.
Both Multiproviders contain transactional records which have ZHRLVL values filled up.
Also in master data ,against ZHRLVL values(the same which are present in transactional record) , email address are maintained.
However, when executing IB settings queries on M1 and M2, Broadcasting works for M1 but however it doesnt work for M2.
Any help in this regards will be appreciated.
Best Regards,
Parth

Hey Sebastien,
Thanks for noticing that.My Mistake I didnt mention about the error message.
The error message comes in form of a warning saying that the recipients could not be determined.
This happens on top of my maintaining the email ids in master data against the corresponding transactional record values.
Would apperciate if you are able to suggest something here.
Best Regards,
Parth

F4 not working for a particular user id

Dear friends,
I have one problem , for one user id for Material code - I am not getting F4 drop down values. If the drop down button is pressed , system put one fixed value for the field. This problem is there for all transactions (for material code field only).
I tried to replicate this using user profile but system still allow me to search value using F4.
What could be reason for not getting F4 help.
thanks in advance.

Dear Sandeep,
Check with your BASIS consultant,sometimes this occurs because of some technical reason and some
patch has to be applied and sometimes due to authorization problem.
Get the help from your basis consultant.
Check and revert back.
Regards
Mangalraj.S

Windows 8 search not working for on particular folder on external HDD

I have an external HDD which has a library of pdf documents on it (about 11gigs worth) - it's in my index and it used to be perfectly searchable by windows search until I had the files system converted to NTFS from FAT32. Now it literally will not
find anything in the folder with all the pdfs in it (even if you search "pdf" it wont find a single thing) yet it will find anything else in any other folder on the same drive.
I have no idea what the problem is. That folder is also shared, and is a google drive. Any ideas would be appreciated, thanks, DB

check out this link:
http://www.softwareok.com/?seite=faq-Windows-8&faq=78
from above link:
To change the Windows-8 indexing options, please open Indexing Options Window. Press the key combination [Windows Logo] + [R],
then just type the command control.exe srchadmin.dll [...
see Image 1 Arrow-1]
Click Modify [...
see Image 1 Arrow-2] and please check the mark in the checkbox of the folders that you want[...
see Image 1 Arrow-4]
(Image-1) Windows-8 Indexing Options and Indexed Locations.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Personal Data not working for an employee in ESS

Hai All,
I have configured Personal Data in ESS. But, for a particular employee Personal Data is giving the below mentioned error when he edits the data. The error happens when he edits and clicks on Review or when he clicks on the dropdown for Nationality(Only for this field, the error occurs) and selects a value from that dropdown.
As I searched in the forum, I found that we have to search ST22 for that user. In ST22, it is throwing 4 errors:
1. UNCAUGHT_EXCEPTION CX_HRPA_INVALID_INFOTYPE_DB. The exception 'CX_HRPA_INVALID_INFOTYPE_DB' was raised, but it was not caught anywhere along the call hierarchy. Termination occurred in the ABAP program "CL_HRPA_TIMECONSTRAINT========CP" - in "COMPUTE_INSERT". The main program was "SAPMSSY1 ".
2. SYSTEM_CANCELED. The current program "CL_HRPA_TIMECONSTRAINT========CP" has been terminated by another mode.
3. OBJECTS_OBJREF_NOT_ASSIGNED_NO CX_SY_REF_IS_INITIAL. Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in "HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
4. SYSTEM_CANCELED. The current program "SAPLHRXSS_PER_MAC" has been terminated by another mode.
My questions are:
a Why it is not working for a particular employee?
b Why it is working for other employees?
c Did I miss out some configurations?
Please help me out.
Regards,
Jubish

Hai,
Thankyou for the reply. But the user has entry in the infotype. Likewise, it is possible to change data from PA30 transaction also. The problem occurs only when I try to change data through ESS.
Regards,
Jubish

DNS not working for some computers

We have a SRP521W router and is set up with one SSID for wireless. In our office all the computers (5) can connect but only some may get on the internet. I have a laptop I am testing with and it will not connect, wired or wireless.
I found an article relating to flushing DNS, tried that, no luck.
I found another that said I should try setting my DNS to 208.67.222.222 and this worked, internet works fine.
I tried rebooting the DSL modem and router, tried many different things but am not a networking guru so I am just not sure why the DNS is not working for one computer but works for another, connected to same LAN or SSID.
Thanks,
Brad

Though what Don posted is one way to accomplish it, I never add anything to my DNS and it works fine. Windows DNS, in a default installation, will automatically forward to the root (.com, .edu, .gov, etc.). So I always just point my workstations
to my Domain Controller as their DNS and everything works just fine without any additional configuration.
Guess I'm one of those who won't even trust Google for sharing a DNS, particularly when I have never needed to set up any forwarders.
.:|:.:|:. tim

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

CsrAttachmentUploadDiv part attachment is not rendered SP 2013(Attach file in not working for all the list forms)?

csrAttachmentUploadDiv partattachment is not rendered SP 2013(Attach file in not working for all the list forms)?
Ravi
function ShowPartAttachment() {
ULSopi:
    if (document.getElementById("part1") == null || typeof document.getElementById("part1") == "undefined") {
        alert(Strings.STS.L_FormMissingPart1_Text);
        return;
    (document.getElementById("part1")).style.display = "none";
    (document.getElementById("partAttachment")).style.display = "block"; //problem here

Am also facing the similar problem....any iputs are highly appriciated.
Issue..
1) Defined the attachment type in IMG.
2) Added the attachment type "SFREEATTM" by selecting other attributes---> Attachment Types.
3) Attached the excel file in the design.
See the screen shot below:
The Issue is when testing through tcode nwbc in the inbox the attachment tab is not visible after selecting the particular form.
Please see the screen shot below:
Did i miss any Configuration?? Please suggest...
Regards,
Naveen

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

SAP FTP Binary Does not work after EHP 7 Upgrade

Hi All,
Since EHP 7, if I try to execute an external command through sm49, which has a shell script for ftp connection and fetching files, the 'binary' command after ftp connection is not working.
Result? I'm fetching corrupted files once in a while. The same was fine before the upgrade. The script runs fine at OS level. We are using AIX.
Did anyone see this issue before? Is there a solution?
Please help, it's quite urgent.
Thank you.
Uday

Hi Uday,
Since EHP 7, if I try to execute an external command through sm49, which has a shell script for ftp connection and fetching files, the 'binary' command after ftp connection is not working.
1) What is the exact error message you get ?
2) Did you check permission to the script . Ensure sidadm has full access to execute it.
3) Did you check Test Connection to TCP/IP RFC destinations SAPFTP and SAPFTPA are working fine in SM59 ?
Regards,
Deepak Kori

Alerts are not working for Site collections in a content database

Hi,
We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
or changes happen in the list/document library.
We have tried with Immediate as well as scheduled alerts both are not working.
FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
Any help would be appreciated.
Thanks
Ramkumar

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Live Preview is not working for me

Live Preview is not working for me. I've read many other forums and tried everything and I still get the same issue that everyone else has mentioned. I'm on Chrome Version 34.0.1847.116 m . I have multiple user profiles with Chrome so not sure if that makes a difference.
Adobe Edge team, for a lightweight browser that should be easy to use, this does not make it easy. Hopefully you can implement a fix soon that works for all cases as I was really looking forward to trying this out and I'm unable to.

I am having issues as well.
Running through the intro tutorials - Just the basic HTML tutorial files. When initiating live preview, I restarted Chrome as prompted for debugging, After restart the preview page loads fine a single time, works for about 10 seconds or so and then disconnects. I cannot get it to reconnect without restarting the program, but the same thing happens.
Live Preview Error: Unable to Load Development Page
The live preview icon remains orange - as if connected, but no changes write to the preview window in HTML or CSS.
Ive seen the other threads, but none of those items seem to fix my issue.
Anything I can do here besides wait for update? Love the basic product - the editing features are awesome, but until live preview + reliable FTP is set, I'll probably stick with current coding solutions.
Running an Imac OSX 10.9.2
Chrome 34.0.1847.116

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

FTP bursting is not working for a particular server

Similar Messages

Maybe you are looking for