F4 not working for a particular user id

Dear friends,
I have one problem , for one user id for Material code - I am not getting F4 drop down values. If the drop down button is pressed , system put one fixed value for the field. This problem is there for all transactions (for material code field only).
I tried to replicate this using user profile but system still allow me to search value using F4.
What could be reason for not getting F4 help.
thanks in advance.

Dear Sandeep,
Check with your BASIS consultant,sometimes this occurs because of some technical reason and some
patch has to be applied and sometimes due to authorization problem.
Get the help from your basis consultant.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

Style Code Not Working for Read Only Users !

Hi
Can anyone help us with this issue. We have created some special Styling code in order to hid the Quick Launch on the home page of our main SharePoint site. The Styling works no problem at
all for users with edit rights, however we found that the styling did not work for users with read only access. What we found was that if we switched on the "Edit Items - Edit items in lists, edit documents in document libraries, and
customize Web Part Pages in document libraries." in the List Permissions for the Permission Levels for the Read Access group, the Styling then works no problem at all. HOWEVER it then gives those users the ability to EDIT the site page, as it then
puts the Edit option on the page top right for the user to click and then mess up the web page, which we can not permit.
SO..... How do we get this styling to work for ALL user types ?

Hi,
This usually happens when the CSS file is not published or approved, please check it.
If the CSS files uploaded in the Style Library, please check whether you had to check in those CSS files or not.
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

MOSS 2007 Enterprise Search not working for Korea based users but WSS Search is working fine.

Hi,
In my organization all the users are able to do Enterprise content search and people search but only Korea based users its not working (both content search & people search). But at the same time WSS 3.0 search (its a different farm) is working fine.
Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information.
1. No changes in the URL for all users and Korea users
2. Tried with different browsers and clearly the temp files but no use.
3. Korea users also working from office only with Wired LAN connection.
4. Tried different accounts (including Farm account) but no use.
5. Not receiving any errors in the Event Viewer
Anyone please let me know what went wrong.
Regards,
Prabhu.

Hi,
Is the Archive folders open in your Outlook?
Please try to click and hight All Mail Items under Mail Folders and then try to search again:
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

A particular widget won't work for a particular user

I recently upgraded from 10.3.9 to 10.4.6. After trying out various widgets I have hit on a curious problem: the Unit Converter widget that is installed with the system will not work on my user account. It works on other user accounts. It works on a new "test" user account. But on my account, the widget just seems to hang: it appears, but the menus stay empty and I cannot type anything into the number fields. On other accounts this is the way it looks before it has loaded. And the same thing happens on both computers! All other widgets (Apple and third-party) seem to work fine on my account.
I have tried the following:
- trashed com.apple.dashboard.client.plist
- trashed com.apple.dashboard.plist
- trashed caches/dashboardclient
- repaired permissions with disk utility
- cleaned up caches with Applejack
- uninstalled and re-installed widgets
but the problem is still there.
The Activity Monitor tells me that the Unit Converter DashboardClient is using between 80% and 94% of CPU.
What could be special about my user account that is preventing Unit Converter from working?

Thanks for the advice, Niel. Interestingly enough, the Unit Converter had not created a plist file. I did try you suggestion of dragging all the widget plist files to the desktop, but the Unit Converter still didn't work.
But I have now found the solution. The problem was being caused by a custom number format that I had inherited from the Panther installation. In Tiger it's impossible to set a custom number format - the number format is set automatically for each region and it's impossible to change it. But it was possible to set a custom number format in Panther and it is recognized by Tiger. So I can either keep using my custom number format, in which case Unit Converter won't work, or set one of the standard number formats, in which case Unit Converter works (I see that now it actually launches, it has also created its plist file: eveidently the file didn't exist before because the widget had never got as far as creating it).
I think it's very bad that Apple removed the custom number format feature. And since the old custom number format from Panther was recognized by the new system, it's also bad that this widget doesn't work with it.
But at least I've found the solution to my own problem!

FTP bursting is not working for a particular server

Hi All,
I am using BIP 10.1.3.4
I have a strange problem
In my company there are 2 environment
development and production
I have configured a FTP location in both the environment.But the report ftp bursting is working but in Production it is not working.
Is there any other way of checking settings.
Please suggest.
Thanks

Hi All,
I enabled the logging in BI publisher and found the following error in log file.
Can you please suggest
[120711_182041240][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Courier closed.
[120711_182042353][oracle.apps.xdo.template.rtf.FOTemplate][STATEMENT] xsl1.0-compatibility is set to false in configuration ,xdk11g wrapper is off
[120711_182043190][][STATEMENT] Logger.init(): *** DEBUG MODE IS ON. ***
[120711_182043190][][STATEMENT] Logger.init(): LogDir=/applic/oracle/product/10.1.3/OracleAS_BIP_1/xmldebug
[120711_182043190][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor constructor is called.
[120711_182044031][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor has been initialized without default config.
[120711_182044032][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setLocale is called with 'en-AU'.
[120711_182044032][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setTemplate(String) is called with '/applic/oracle/product/10.1.3/OracleAS_BI
P_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xdo2.tmp'.
[120711_182044034][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setData(String) is called with '/applic/oracle/product/10.1.3/OracleAS_BIP_1/
j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xdo0.tmp'.
[120711_182044056][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setOutput(String)is called with '/applic/oracle/product/10.1.3/OracleAS_BIP_1
/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372/xmlp17031tmp_85900001_1.xls'.
[120711_182044057][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.setOutputFormat(byte)is called with ID=4.
[120711_182046652][oracle.apps.xdo.template.FOProcessor][STATEMENT] Start Memory: max=989MB, total=495MB, free=448MB
[120711_182046652][oracle.apps.xdo.template.FOProcessor][STATEMENT] FOProcessor.generate() called.
[120711_182046653][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_out_ab1f6.out' is created.
[120711_182046654][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_data_1_.xml' is created.
[120711_182046998][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182046653_fo_data_1_.xsl' is created.
[120711_182047052][oracle.apps.xdo.template.FOProcessor][STATEMENT] createFO(Object, Object) is called.
[120711_182047156][][STATEMENT] WARNING: Found undetermined AttrKey: style-name
[120711_182052743][oracle.apps.xdo.common.xml.XSLT10gR1][STATEMENT] Oracle XML Developers Kit 10.1.0.5.0 - Production
[120711_182052746][oracle.apps.xdo.common.xml.XSLT10gR1][STATEMENT] Scalable Feature Disabled
[120711_182058312][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058313][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058315][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058316][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058318][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058319][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058321][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058321][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058323][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182058323][][ERROR] Invalid XSD string: 30-Nov-2031
[120711_182058325][][ERROR] Invalid XSD string: 23-Jul-2011
[120711_182221400][][ERROR] Invalid XSD string: 25-Sep-2011
[120711_182221401][][ERROR] Invalid XSD string: 27-Nov-2011
[120711_182221401][][ERROR] Invalid XSD string: 28-Aug-2011
[120711_182221402][][ERROR] Invalid XSD string: 31-Jul-2011
[120711_182221490][oracle.apps.xdo.template.FOProcessor][STATEMENT] Log file 'xdo_120711_182216594_fo_fo_1_.fo' is created.
[120711_182221514][][PROCEDURE] XSL-T time used: 4730 msecs
[120711_182221514][oracle.apps.xdo.template.FOProcessor][STATEMENT] Calling FOProcessingEngine.process()
[120711_182221514][][STATEMENT] Using optimized xslt
[120711_182221518][][STATEMENT] Temporary file created: /var/tmp/xdo8wXFrbYzan17047.tmp
[120711_182221518][][STATEMENT] [ HTML GENERATOR ]---------------------------------------------
[120711_182221518][][STATEMENT] XDO version = Oracle BI Publisher 10.1.3.4.1
[120711_182221518][][STATEMENT] java.home = /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre
[120711_182221519][][STATEMENT] XDO_TOP = null
[120711_182221519][][STATEMENT] Config Path = null
[120711_182221519][][STATEMENT] Debug Cfg Path= /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre/lib/xdodebug.cfg
[120711_182221519][][STATEMENT] Font dir = /applic/oracle/product/10.1.3/OracleAS_BIP_1/jdk/jre/lib/fonts/
[120711_182221519][][STATEMENT] Locale = en-AU
[120711_182221520][][STATEMENT] [ HTML GENERATOR PROPERTIES ]----------------------------------
[120711_182221520][][STATEMENT] fo-image-handling-ver=5.5
[120711_182221520][][STATEMENT] html-css-base-uri=
[120711_182221521][][STATEMENT] html-css-dir=null(not set)
[120711_182221521][][STATEMENT] html-css-embedding=embed-to-header
[120711_182221521][][STATEMENT] html-image-base-uri=
[120711_182221521][][STATEMENT] html-image-dir=/applic/oracle/product/10.1.3/OracleAS_BIP_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp/120711_18202
8372
[120711_182221521][][STATEMENT] html-output-body-only=false
[120711_182221522][][STATEMENT] html-output-charset=UTF-8
[120711_182221522][][STATEMENT] html-output-width-in-percentage=false
[120711_182221522][][STATEMENT] html-outputtype=pseudo-excel
[120711_182221522][][STATEMENT] html-replace-smartquotes=true
[120711_182221522][][STATEMENT] html-show-footer=true
[120711_182221523][][STATEMENT] html-show-header=true
[120711_182221523][][STATEMENT] html-suppressed-line-height=false
[120711_182221523][][STATEMENT] make-accessible=false
[120711_182221523][][STATEMENT] system-temp-dir=/var/tmp/
[120711_182221523][][STATEMENT] ------------------------------------------------------
[120711_182222050][][STATEMENT] Rendering page [1]
[120711_182222117][oracle.apps.xdo.common.font.FontFactory$FontDef][STATEMENT] Type1 font created: Helvetica
[120711_182226564][][STATEMENT] Phase2 time used: 4514ms
[120711_182227573][][STATEMENT] Continue rendering page [1]
[120711_182231893][][PROCEDURE] FO+Gen time used: 10378 msecs
[120711_182231893][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) is called.
[120711_182231894][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) done. All inputs are cleared.
[120711_182231894][oracle.apps.xdo.template.FOProcessor][STATEMENT] End Memory: max=989MB, total=495MB, free=36MB
[120711_182231927][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] initConfig(): loading default properties :{}
[120711_182231928][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): called with request type :ftp
[120711_182231928][oracle.apps.xdo.delivery.DeliveryManager][STATEMENT] createRequest(): exiting
[120711_182231930][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] java.lang.NullPointerException
at oracle.apps.xdo.batch.DeliveryHelper.getFtpDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.DeliveryHelper.addRequest(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.addDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.submitEnterpriseDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2055)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:371)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
[120711_182231930][oracle.apps.xdo.delivery.ftp.FTPDeliveryRequest][STATEMENT] submit(): Called
[120711_182231931][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] oracle.apps.xdo.delivery.DeliveryException: Document file or input stream is not set.
at oracle.apps.xdo.delivery.AbstractDeliveryRequest.submit(Unknown Source)
at oracle.apps.xdo.batch.DeliveryHelper.submitRequests(Unknown Source)
at oracle.apps.xdo.batch.bursting.DocumentDelivery.submitEnterpriseDeliveryRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.java:119)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:311)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2055)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:371)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
[120711_182231933][][STATEMENT] Default write connection pool max:20, min:10, total:10, available:8
[120711_182232025][][STATEMENT] ToplinkDataHandler.terminateSession() : releasing the session.
[120711_182232027][][STATEMENT] /applic/oracle/product/10.1.3/OracleAS_BIP_1/j2ee/home/applications/xmlpserver/xmlpserver/xdo/tmp//120711_182028372 deleted s
uccessfully...
[120711_182232028][][STATEMENT] [ID:11401] Time elapsed for bursting : 136107, time from beggining : 136215
[120711_182232028][][STATEMENT] [ID:11401] Time elapsed for notification : 0, time from beggining : 136215
[120711_182232029][oracle.apps.xdo.servlet.scheduler.XDOJob][STATEMENT] [ID:11401] Scheduler finished the job. Exiting...
Thanks & Regards

Remote / Home Sharing not working on a particular user account

I have recently purchased a new MacBook Pro 13" (Core i5) and I'm having issues using the Remote app on my iPhone 3GS, as well as using Home Sharing. I used Migration Assistant to transfer my account and files across from my previous MacBook (with which I never had any Remote or sharing issues).
If I try to connect using Remote it says "Remote can't connect to your iTunes library. Check your network settings and try again". Strangely, if I open the Remote app immediately after starting iTunes, it will work for about 15 seconds and then lose the connection.
For Home Sharing, if I try to click on "Shared" using my iPhone's iPod app, as soon as I click on my library it simply says "Cannot connect to Media library". Again, if I click on shared as soon as iTunes starts, I can select my library, which will then load, but once loaded it just cycles through any albums I choose without playing the tracks (e.g. it just silently shows each track name in turn for about half a second until the end of the album is reached).
As a test, I created a new user account, and when using that account these features seem to work fine. I have tried everything obvious, and have tried reinstalling iTunes and the Remote app. I have no firewall, and am properly signed into Home Sharing on all devices. As a test, I also just tried using my old MacBook again with the same iPhone, everything functions as expected. The problem seems to be directly related to this user account. Any ideas anyone?!
Thanks!

May of found a fix (could be temporary but is working fine for me). I had issues with itunes - iphone (remote app).
- Turn on Home sharing on iPhone
- Turn off Home sharing on Mac in itunes
- On iphone (remote app) Click Add an itunes library manually
- iPhone will appear in itunes device list - choose and setup (using passcode)
- Now turn on hone sharing again.
Should be working.

ICal alerts not working for only one user

My main user account stopped giving me iCal alerts. I can switch to another user and my test alert works. I've found a lot of information online but most seems to be for older versions of iCal. I have gone into ~user/Library and removed everything related to iCal. I even managed to finally delete the home calendar that seemed to re-appear. I managed to start with a clean calendar but no alerts. Is there an alert plist file that could be the culprit? I've done a global search in Terminal for anything under ~User/Library with "alert" or "notification" in the filename but can't find anything. I hate to rebuild an entire account again.

It seems someone has set the user policy at webapplication level for that user.Check the similar thread below
http://social.msdn.microsoft.com/Forums/es-ES/18b4f019-093d-45f6-92b7-8350d13bd663/let-us-know-why-you-need-access-to-this-site-why-do-i-see-this-error-and-who-will-give-access?forum=sharepointgeneral
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

After 10.7.5 update, internet browsers do not work for non-admin user.

My daughter has a Macbook Air running OS 10.7.5. I'm the administrator and have no problems. My daughter has had a separate user account ever since we bought the computer 13 months ago (just out of warranty).
The computer is connected to the internet via WiFi router.
Since the most recent system update, we can't connect to any webpages when logged in under my daughter's user account.
Connections time out and the error message suggests we disable firewalls and proxies (there are none... I think).
She can still connect Mail, Skype and iTunes Store but not Safari or Firefox. We downloaded Google Chrome with the admin account and installed after this problem showed but it has the same problem when using her account.
I've searched the Apple forums and elsewhere and seen a few similar problems but none where the administrator's browsers work and the user doesn't.
By the way, there are NO parental controls activated.
Please help.

Hi,
I can imagine the inconvenience you have experienced. I will try to help you in fixing the issue.
Please test this issue in the Clean Boot environment to check if there is some conflicts with network.
If the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Also, to find where your problem is, I suggest you use Network Monitor tool to capture a network package:
http://www.microsoft.com/en-in/download/details.aspx?id=4865
Then, please upload the package here for further research.
Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing, privacy, and collaboration:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support

Embedded Flash not working for limited access users?

Hi there,
Im currently having an issue with Flash 10.1 on a new student image im creating,
After testing the install of 10.1.122.64 this is the findings i made:-
As administrator i could run Mainstream Flash players such as BBC iplayer and youtube
As limited user i could also run mainstream flash players
As administrator i could run embedded flash videos
as limited user i could not run embedded flash videos
This is proving somewhat a big issue as the machines we have that cant run embedded flash videos some of them have Adobe Web design CS5 and they are unable to test their flash videos through IE8
Our current image uses Windows XP with IE8 and office 2010 amongst other things
if you need any more information please let me know.
Thanks

Hi all , thanks for your responses :-
Willenger - I have 3rd party flash content enabled already,
SOS - After checking the two video links youve both posted , the youtube one works, the embedded one SOS linked doesnt.
ive increased the amount allowed aswell to no avail.
thanks for your updates but no success so far, any other questions or details you need, give me a shout

OWA does not authenticate for one particular user

Dear All,
Hope you are doing great...!
I am having Exchange 2010 Environment with NLB having two CAS servers bonded with it.
One of OWA cannot authenticate ONLY ONE USER.
It just says user name or password is incorrect.
Please suggest as early as possible.
Regards, Jay.

User account is not locked out, I even tried to reset the account password and tried unlocking the account too.
User is able to access through other CAS node in NLB.
User is not using any mobile device. He is using OWA in his desktop browser.
Please help!!
Regards, Jay.
This is weird . did you try using other system ? Also what changes you have done for this user recently ?
Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

Windows 8 search not working for on particular folder on external HDD

I have an external HDD which has a library of pdf documents on it (about 11gigs worth) - it's in my index and it used to be perfectly searchable by windows search until I had the files system converted to NTFS from FAT32. Now it literally will not
find anything in the folder with all the pdfs in it (even if you search "pdf" it wont find a single thing) yet it will find anything else in any other folder on the same drive.
I have no idea what the problem is. That folder is also shared, and is a google drive. Any ideas would be appreciated, thanks, DB

check out this link:
http://www.softwareok.com/?seite=faq-Windows-8&faq=78
from above link:
To change the Windows-8 indexing options, please open Indexing Options Window. Press the key combination [Windows Logo] + [R],
then just type the command control.exe srchadmin.dll [...
see Image 1 Arrow-1]
Click Modify [...
see Image 1 Arrow-2] and please check the mark in the checkbox of the folders that you want[...
see Image 1 Arrow-4]
(Image-1) Windows-8 Indexing Options and Indexed Locations.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

MB Air two finger scroll does not work for a user but does for another

Hi
MB Air. 10.9.3.
Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
Tried this in Terminal:
defaults write -g com.apple.trackpad.scrollBehavior 2
Any ideas?

This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

Workitem not going to a particular user id

Hi,
I am having a workflow container element APPROVERLIST which stores the ids of the users to whom a particular workitem should go. But for a particular user id , the workitem is not going to that person, rather it is going to some other user ids. I checked if that id has been substituted but that is not the case.
Are there some other areas where I can check exception?
thanks in advance.
Abhishek

Dear all,
I have checked all the above scenarios.
There is no excluded agent existing . The bindings are correct. Let me describe the scenario little bit more in detail.
APPROVERLIST is a workflow container element ( multiline ). This container element is populated in a particular task. This task fetches the user ids from a table and stores it here.
In the next task which is a foreground task, in the "agents" APPROVERLIST is mentioned against EXPRESSION , so this workitem will go to all the users who are in APPROVERLIST.
Agent assignment is maintained correctly. Its not working for one particular id. Is there any place to check this outside the workflow design?
Also I checked the user id, it is existing.
regards,
Abhishek

F4 not working for a particular user id

Similar Messages

Maybe you are looking for