FTP file timestamp/Calendar getTimeInMiilis() off by one year...

Hi,
My apologies if this doesn't belong here, but I'm not sure where to file it. I'm using the Apache commons library to do FTP transfers. When I pull a file down, I try to set the last-modified timestamp using:
private static void setTimeStamp(FTPFile file, File localFile) {
localFile.setLastModified(file.getTimestamp().getTimeInMillis());
}However, it seems to be setting the timestamp incorrectly; the year is off by one.
I can compensate for it by adding one to the calendar object, but I wanted to ask here to see if anyone can explain it to me in more detail... perhaps I am misunderstanding something fundamental about the Calendar class or something?
Thanks,
KaJun

Could it be that the FTPFile.getTimestamp() is in error by one year rather than the File.setLastModified() ?

Similar Messages

Help me to search on calendar for more than one year

I desparately need to be able to search on calendar for more than one year., which was taken away on the new operating system. I have kept personal memories of my husband on there in the notes sections on days when we did things. ( I have also kept all kinds of personal notes, like doctor records or conversations, in the notes of events/dates.) it is a huge loss for me not to be able to search my calendar for more than one year. Is there any way I can do this?

Jens,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Exchange / Google calendar entries off by one hour after DST

I noticed that all of my repeating entries from my Google calendar on my iPhone (synced with the Exchange "Google sync" method) were off by one hour, appearing one hour delayed, starting November 7th, 2010 and ending in March 2011 when DST starts again. After turning Time Zone Support off in the iPhone settings, everything fixed. However, this is unfortunate if it means I don't have the ability to shift my calendar when I travel. Anyone else experience this problem, or know of an actual fix (as opposed to this work-around)?

Woraround: Turn on time zone support in the mail calendar settings and choose your location. Downside is you have to change it if you are traveling. I thin apple should address this as a bug.

IPhone 3G Email and Calendar times off by one hour (slow one hour)

My times which I send/receive emails or put appointments on the calendar are 1 hour slow as compared to my computers. I have Mobile Me and Mobile Me (on the computer) and my Outlook emails and calendars match and my current time is correct on all. On the IPhone 3G the current time is correct but the time a email is sent or received and all appointments on the calendar are both off by one hour (one hour slow on the IPhone 3G).
I have set time automatically in "settings" to on, and under "email contacts and calendar" I have time zones disabled. I have tried each possible combination of these settings but cannot get the email/calendar times to match between my computers and the IPhone 3G regardless of how these are set.
I have numerous computers and all times are correct on all. On the IPhone 3G the current time (the clock) is correct, but times in emails and calendar appointments are all off (slow) by exactly one hour no matter what I do.
Anybody else have this issue, and/or know what the solution might be?
Thanks
The Omega

I have tried that and it did not work. I am now trying it with everything set to enable DST, and see if that works. Everything, so far, seems to be in sync. The phone would be right for a second when you went into the calendar and then change to be an hour off. Strange. I think the settings I have now (all, Windows, MobileMe, and the IPhone 3G set to DSL on, the same) may be working. Only time will tell.
Thank you.
The Omega

Calendar entry off by one day

Hi
I have a weird problem, I have one calendar in which the entries are off by one day only on my iphone, they are correct on my ical where I enter them and also on icloud website calendar but NOT on the iphone. They show as all day events on the iphone exactly one day prior to when they should be displayed. Any thoughts?

(1) If your iPhone is syncing contacts with iCloud, turn it off. In Settings on your iPhone, Mail,Contacts,Calendars, Accounts, iCloud, turn off Contacts.
(2) sync your iPhone to iTunes.
(3) now select the ‘Info’ tab in iTunes for your iPhone. Ensure that ‘Sync Address Book Contacts’ is ticked. (You can revert to syncing with iCloud later, after this process is complete.)
(4) scroll to the very bottom section of the Info tab. Where it says ‘Replace information on this iPhone’, select ‘Contacts’.
(5) Sync again.
Now check Calendars on iPhone, this process ‘fixes’ the information of birth dates and they should now appear correctly.

Cannot find my calendar events older than one year. Where are they ad how do I get them back?

I cannot find my old events on iCal. It seems it only goes back one year. How can I find them and recover my information and events going back further than that?

Greetings,
Sorry to hear about the missing data.
If you don't see your events there are 2 possibilities:
1.) There is something wrong with the calendar cache
2.) The events have been deleted
First go to iCal > Preferences > Advanced > Delete events.. -- see if this has been checked as this deletes events after a point in time you specify. Even if this is not checked now, if it was ever checked in the past, that will delete events.
To reset iCal's cache and settings in the hope this will bring the events back:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
If the events do not come back then the information you are looking for is truly not in iCal. You will need to restore from a backup (like TimeMachine) from a point in time before the events in question went missing.
If you do not maintain backups of your computer, start now.
Depending on how long ago these events were deleted from iCal you can try using data recovery to bring the files back although as these are past events, you may find that just moving forward from here is simplier than going through the effort but that is of course up to you to decide.
Here are a few examples of data recovery programs:
http://www.prosofteng.com/products/data_rescue.php
http://www.macintosh-data-recovery.com/
http://www.subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products _id=1
You can contact a local Apple Authorized Provider to see if they offer data recovery services: http://www.apple.com/buy/locator/service/
There are many nationwide / worldwide data recovery companies out there. Here are a few examples:
http://www.ontrackdatarecovery.com
http://www.drivesaversdatarecovery.com/
http://www.totalrecall.com/
Best of luck to you.

Calendar item off by one hour after daylight savin...

Hi,
When I accept an outlook meeting invitation from my phone (Lumia 520) it gets into the phone´s calendar one hour earlier than sceduled in the invitation.
I have checked settings, the outlook invite as well as my phone has the same timezone settings (western europe), though phone settings is "Auto".
It seems like phone does not handle calendar invite items correctly after the switchover to standard(winter) time. For information; when the Outlook meeting item is sent to other calendar systems (e.g. other outlook server or google calendar) the meeting is registerred correctly.
Does anyone have any clue how to solve this issue?
Thanks,
//Christian

Hi ceggertsen,
Are you using your Microsoft account? How often do you experience this? Can you try to create a test invitation using another exchange account and then see if it's the same? Also, try to set your manually set your time, date, and time zone and see if it will make any difference.
Let us know the outcome.

Calendar birthdays off by one day

I guess this has been a pretty common problem, but I'm wondering if anyone has found a solution (other than to manually re-input birthdays)? Here's the specifics on my situation.
My wife and I each got an iphone last month and we each have the latest version of IOS 5. I put quite a few birthdays in my contacts list and they showed up fine on my calendar. I shared my contacts with my wife using Bump. The birthdays show up correctly in her Contacts information - but some of them (and only some, not all) show up on her calendar a day early. We tried doing a reset of her phone to repopulate the calendar birthdays from the contact info, but that didn't make any difference. Neither of us has Timezone Support turned on.
Anybody have a solution?

(1) If your iPhone is syncing contacts with iCloud, turn it off. In Settings on your iPhone, Mail,Contacts,Calendars, Accounts, iCloud, turn off Contacts.
(2) sync your iPhone to iTunes.
(3) now select the ‘Info’ tab in iTunes for your iPhone. Ensure that ‘Sync Address Book Contacts’ is ticked. (You can revert to syncing with iCloud later, after this process is complete.)
(4) scroll to the very bottom section of the Info tab. Where it says ‘Replace information on this iPhone’, select ‘Contacts’.
(5) Sync again.
Now check Calendars on iPhone, this process ‘fixes’ the information of birth dates and they should now appear correctly.

Time bar on calendar is off by one hour

So I notised this problem this morning. The time is correct, all the events are at the correct times. The only problem is that the "progress bar" itself is showing up in the wrong hour block. I have turned on time-zone support and I have turned the iPhone on and off again twice now. Is anyone else having this problem, or know a way to fix it?

This is a known bug. After midnight it will correct itself. Apple is aware of it.

IPhone 4S Calendar events off by one day

Just upgraded to a new iPhone 4S (on launch day) and synced with iTunes and as a "new" phone (did not restore from previous phone backup). Calendars synced from my MacBookPro without any problems... or so I thought. Just discovered that ALL my reminders and events are showing the day before they occur. Example: my mother-in-law's birthday is tomorrow but my phone tells me it is today. They are correct on my MacBookPro calendar.
Anyone know why this occurred and how I can fix it? It's very strange!

Couldn't find this so started a new discussion, with the "fix" that Tech Support helped me figure out.
(Then I discovered I could find my discussions using "My Stuff" at the top of the page. LOL)
Here's a link to my new post with steps for fixing the all day events on the wrong day problem.
https://discussions.apple.com/message/16609517#16609517
Hope it helps.

Google Calendar Dates Off By One Week

I just upgraded to an iPhone 3G. I synced to 4 Google calendars. Three of them work fine. However, the main calendar shows on the iPhone a week late. For instance, my appointment scheduled on Google for Nov 18 shows on my iPhone as Nov 25.
Any ideas?

Woraround: Turn on time zone support in the mail calendar settings and choose your location. Downside is you have to change it if you are traveling. I thin apple should address this as a bug.

Calendar in ASP (for one year)

Hello
I am new in web apps so my question probably will sound not so proffesional for most of you.
I need to make a small app in which I get a list of important dates during an year and my web app should have a calendar (like it is in the image bellow) and mark all this important dates with a round circle or anything else.
So, where I need help is to have a template (a control) of a calendar - I shoud give only the year as parameter and view the year calendar in exactly same way linke in image. This image sample is a print screen from Lumia 930 calendar.
My app will be in ASP (but not MVC).
Thank you in advance
Thanks in advance, Ciprian LUPU

Hello,
I'm not sure whether you speak about ASP.NET or Classic ASP but anyway the right forum to post these kind of questions is at
forums.asp.net.
Regards, Eyal Shilony

Problem with gettigs Timestamp for a FTP files

Hi All,
I try to get a files from FTP location to my location Pc using enterprisedt.net.ftp.FTPCient. I need to get the fides from FTP location and copy that files in local with original timestamp.
ex.
client.get(localfilenamepath,remotefilename);
Date ftpdate= client .modtime(remoteFilename);
after coping file to my local pc,i need to set the original timestamp of the remote file.
localfile.setLastModified(ftpdate.getTime);
in that case,i cannot get the original time but the date will updated correct.
appreciate if anyone give me a solution.
Thanks
Message was edited by:
mayen

After setting lastmodified time,the date only updated with original but the time is bit differnt (i.e) its updated with some time different
for ex,
FTP File shows>> 30/05/2006 1:39PM
after coping in local file>> 30/05/2006 5:39 AM.
The original ftp file's time is update with different one.
How do i set the time also the same one.
Message was edited by:
mayen
Message was edited by:
mayen

Calendar sync time off by one hour

When I sync my BB Curve 8530, version 5.0, by Verizon with Outlook 2007 calendar, the appointment time is off by one hour. The BB Curve always shows the appt time one hour later than Outlook. When I schedule an all day event, it begins at 1 am and carries over to the next day at 1 am. I've verified time zone settings for both. Not sure what else to do or check. Any advice is greatly appreciated so I won't be late again!!!
Looney2ndad

Update, I now have several accounts that reporting the same issue. Has anyone else seen this?

IMAQdx timestamp off-by-one

I have a network camera and it provides its own timestamp via the IMAQdxTimestampHigh and IMAQdxTimestampLow properties. I'm observing something I don't expect -- the timestamp appears to be off by one image.
I have a simple VI that shows this behavior. In it, I open an IMAQdx session with my camera, configure a grab, reset the timestamp counter, and read the images sequentially. When examining the timestamp associated with each image, the first image has what appears to be the Nth+1 image's timestamp from the previous grab, as if stale data was left in memory.
To see this behavior, run the "Exercise Timestamp Reset.vi" twice. Before you run it the second time, take note of the value for "Last Timestamp". When you run it the second time, the value for "First Timestamp" is slightly higher than "Last Timestamp", which suggests stale data. I would expect "First Timestamp" to be close to zero.
What could be causing this behavior, and how can I fix my code? So far, I've tried:
Moving the "Reset Timestamp Counter.vi" so that it is called immediately after creating the IMAQdx session,
Creating an IMAQdx session, resetting the timestamp counter, and clearing the session before creating a second IMAQdx session for the grab.
My particular configuration:
Allied Manta MG 504B ASG
LabVIEW 2009 SP1
IMAQdx 3.9.1
Solved!
Go to Solution.
Attachments:
Exercise Timestamp Reset.zip ‏50 KB

BlueCheese wrote:
Maybe I used the wrong terminology here.... Its not so much "subverting the firewall" as processing the GigE Vision-related traffic at the lowest layer in the network driver, well before it gets handled by the network stack and any firewalls in the system. This is somewhat implied by using the "High Performance GigE Vision Driver". The firewall is still in place for any other traffic to the system.
When you are _not_ using the high-performance driver, the GigE Vision data does go through the firewall. However, since the reception is done in the OS kernel for performance reasons the firewall doesn't work quite the same way as through applications. The various exceptions you can modify on the list relate to individual programs, not the kernel. The kernel effectively has unrestricted access to the network stack. However, because of the way the firewall works it does end up blocking UDP traffic that is not "connection-based" -- in that UDP inbound traffic is not allowed unless outbound traffic along the same path was recently detected. In the original GigE Vision 1.0 standard there was always a unidirectional path with no way to make it appear bidirectional. In later versions a feature was added that made it possible and today most cameras support it. This is the "Firewall traversal" feature that I mentioned earlier that can be enabled inside IMAQdx. This is likely the easiest option and doesn't require any changes to your firewall configuration.
Thanks for your clarification -- I'm not so alarmed :-)
I was able save another Wireshark capture after enabling Firewall Traversal, and this time I saw a lot more traffic. I set the camera's PacketSize to 1200 and saw many UDP transfers just above that size.
One thing that was a bit strange: I could only enable Firewall Traversal from MAX via View Options » All Attributes and then checking the box for AcquisitionAttributes » AdvancedEthernet » FirewallTraversal » Enabled. I didn't see an equivalent in the LabVIEW Class Browser: Firewall Traversal was not present in the Advanced Ethernet submenu. I didn't see any filtering options for the property node either (I've seen that before in DAQmx). It was only discoverable as AcquisitionAttributes::AdvancedEthernet::FirewallTraversal::Enabled by using IMAQdx Enumerate Attributes.vi. I suppose that the driver doesn't keep a cache of some attributes and relies on run-time detection instead.
At any rate, I would be grateful if you can inspect whether or not the camera is sending bad timestamps. I am still waiting for a response from Allied about a firmware update.
Attachments:
firewallTraversal.zip ‏3388 KB

FTP file timestamp/Calendar getTimeInMiilis() off by one year...

Similar Messages

Maybe you are looking for