FTP pull using  ALSB

I was developing a senario that: ALSB will read a text file using FTP and will write some data in a text file using FTP and store that file in some other location.
To write in a file using I was using following credentials :
Any XML Service type(for business service)
Endpoint URI :- "ftp://localhost:21/ftp_out"
Service Account :- MortgageBroker/FTP Account
as a result I am getting a file in the ftp_out folder but the file is in right format and file name is like x2466594902975505375--6720b292.121c94b2e00.-759fd and it's of " -759FD File".
Please help me in creating file with proper name and with valid data.
Thanks in advance for help.

This solution might help you. There are two parts to it:
a. File name / extension @ design time: To get a uniform file extension, you can configure the properties - Prefix for destination File Name and Suffix for Destination File Name which are available when you create your Business Service in the FTP Transport Configuration Tab / Page. By default these are blank, whcih causes ALSB to give unique ID names to the files
b. File name / extension @ run time: You can also choose to specify the file name and extension from the Proxy Service Message flow, from where you are actually calling the above Business Service. This can be done in the following ways
i. If you are uisng a Route node and a routing action, then include a "Transport Header" node inside the routing action. Select "Outboubd Request" and then select "Add Headers" and then select "ftp" and "fileName" besides the radio button marked as "defined". In the corresponding "Action", you can select <expression> to enter your own expression that evaluates to the filename
ii. If you are using a Stage node and Publish or service callout node, then also you can include a "Transport Header" node and repeat the above steps
Regarding the data format error, it would help if you can specify what kind of file you are reading (XML / text / others). Sometimes, configuring the request / response encoding in Proxy Service (used to read the file) and Business Service also helps
Thanks & Regards
Vivek

Similar Messages

  • Getting the file from IIS FTP Server using ALSB

    Hi,
    I want to extract a file from FTP server in ALSB.I am using ALSB2.5 and Microsoft IIS FTP Server.
    Now i want to know that
    1.Do i need to configure a Proxy service or Business Service to poll a file from FTP server?
    2.How to read the contents of the file once the File comes in?
    Regards,
    Indu Garg

    You need to configure a Proxy service for the polling.
    The contents of the file will be inside the context variable $body.

  • How to use 2 FTP Server in ALSB 3.0

    We want to provide ftp tunneling functionality to any Billing System for ftping files to Payment Gateway System.For this we have one FTP server at Billing System and another FTP server at Payment gateway.We first need to pick the file from File System of Billing computer(using FTP server) and then transfer that vile via ALSB to File system of Payment Gateway(using FTP Server).Now I would like to know:
    1) How to configure 2 FTP server in ALSB(in a single known_host file) ?
    2)How many proxy and business services we need to make to complete this flow of transferring files?
    If any one has some examples or config.jar files for the above scenario of transferring files,please chare it, that would be great help.
    Thanks in advance!

    Hi all,
    i am using osb10g3r ftp business service to poll the remote directory to retrieve file from there.i have configured download,error,archive directories accordingly. I am trying to read the file from the download directory to process the file , through a java call out. But while testing i am getting a exception, filenot found exception from the download directory.
    can someone help me on this
    Regards
    shan

  • Process TIFF file from FTP server using File/FTP adapter

    Hi,
    I have a requirement to process a scanned document TIFF file from a directory on an FTP server using the File/FTP adapter and process through XI into a Web Service via a receiver SOAP adapter.
    My question is can the file/FTP adapter be used to process the TIFF file into XI from an FTP server ? Also, what settings need to be made on the file adapter to allow this file to be processed into XI ?
    Thanks in advance
    Colin

    hi colin,
    TIFF is type of image file, it can be converted to binary using java mapping
    refer this pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
    regards
    Ramesh P

  • How to connect to a FTP server using a proxy in a DMZ with XI file adapter?

    Hello,
    Want to connect to an ftp server using a proxy in the DMZ. I don't see any standard options in the XI file adapter to use a standard. Is there a workaround?
    I already looked at https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=57137
    But it didn't help me.
    Regards,
    Erik van Lisdonk

    U can't use FTP over SSH i.e., SFTP. But u may use FTPS by enabling the SSL layer on J2EE of XI. See this
    SFTP vs. FTPS in SAP PI
    Regards,
    Prateek

  • "Message Rejection Handler" for the file/ftp adapter using fault policy

    Hi guys,
    We are trying to implement "Message Rejection Handler" for the file/ftp adapter using following fault policy configuration.
    Fault Policy:
    `````````````
    <?xml version='1.0' encoding='UTF-8'?>
    <faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
    <faultPolicy version="2.0.1" id="ProcessNameGenericPolicy"
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns="http://schemas.oracle.com/bpel/faultpolicy"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Conditions>
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    name="bpelx:remoteFault">
    <condition>
    <action ref="ora-retry"/>
    </condition>
    </faultName>
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    name="bpelx:bindingFault">
    <condition>
    <action ref="ora-rethrow-fault"/>
    </condition>
    </faultName>
    </Conditions>
    <Actions>
    <Action id="ora-retry">
    <retry>
    <retryCount>3</retryCount>
    <retryInterval>1</retryInterval>
    <retryFailureAction ref="ora-rethrow-fault"/>
    </retry>
    </Action>
    <Action id="ora-rethrow-fault">
    <rethrowFault/>
    </Action>
    <Action id="ora-human-intervention">
    <humanIntervention/>
    </Action>
    <Action id="ora-terminate">
    <abort/>
    </Action>
    </Actions>
    </faultPolicy>
    <faultPolicy version="2.0.1" id="ProcessNameHumanInterventionPolicy"
    xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xs="http://www.w3.org/2001/XMLSchema"
    xmlns="http://schemas.oracle.com/bpel/faultpolicy"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <Conditions>
    <faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
    name="medns:mediatorFault">
    <condition>
    <test>contains($fault.mediatorErrorCode, "TYPE_TRANSIENT")</test>
    <action ref="ora-retry-with-intervention"/>
    </condition>
    </faultName>
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    name="bpelx:remoteFault">
    <condition>
    <action ref="ora-retry-with-intervention"/>
    </condition>
    </faultName>
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    name="bpelx:bindingFault">
    <condition>
    <action ref="ora-rethrow-fault"/>
    <!--<action ref="ora-retry-with-intervention"/>-->
    </condition>
    </faultName>
    </Conditions>
    <Actions>
    <Action id="ora-retry-with-intervention">
    <retry>
    <retryCount>3</retryCount>
    <retryInterval>1</retryInterval>
    <retryFailureAction ref="ora-human-intervention"/>
    </retry>
    </Action>
    <Action id="ora-retry">
    <retry>
    <retryCount>3</retryCount>
    <retryInterval>1</retryInterval>
    <retryFailureAction ref="ora-rethrow-fault"/>
    </retry>
    </Action>
    <Action id="ora-rethrow-fault">
    <rethrowFault/>
    </Action>
    <Action id="ora-human-intervention">
    <humanIntervention/>
    </Action>
    <Action id="ora-terminate">
    <abort/>
    </Action>
    </Actions>
    </faultPolicy>
    <faultPolicy version="2.0.1" id="RejectedMessages">
    <Conditions> <!-- All the fault conditions are defined here -->
    <faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:PartnerLinkName">
    <!-- local part of fault name should be the service name-->
    <condition>
    <action ref="writeToFile"/> <!-- action to be taken, refer to Actions section for the details of the action -->
    </condition>
    </faultName>
    </Conditions>
    <Actions> <!-- All the actions are defined here -->
    <Action id="writeToFile">
    <fileAction>
    <location>Server/Loc/path</location>
    <fileName>Rejected_AJBFile_%ID%_%TIMESTAMP%.xml</fileName>
    </fileAction>
    </Action>
    </Actions>
    </faultPolicy>
    </faultPolicies>
    Fault Binding:
    ``````````````
    <?xml version='1.0' encoding='UTF-8'?>
    <faultPolicyBindings version="2.0.1"
    xmlns="http://schemas.oracle.com/bpel/faultpolicy"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <composite faultPolicy="ProcessNameGenericPolicy"/>
    <service faultPolicy="RejectedMessages">
    <name>PartnerLinkName</name>
    </service>
    <reference faultPolicy="RejectedMessages">
    <name>PartnerLinkName</name>
    </reference>
    </faultPolicyBindings>
    We have SyncFileRead partner link.
    The expectation is: when the message read by SyncFileRead partner link is rejected,
    that rejected message should come to particular directory in the server.
    Could you please help us fixing this.
    TIA.

    HI..
    Have a look at this blog :
    3) Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
    Description: The request requires user authentication
    Possible Tips:
    u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
    u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
    u2022 If the error is in Adapter Engine
    u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
    u2022 May be wrong password for user XIISUSER
    u2022 May be wrong password for user XIAFUSER
    u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
    Http* Errors in XI
    Thanks,
    Pooja

  • Unable to connect to the remote ftp server using dreamweaver.

    For the last one week I have been trying to connect to the remote ftp server using dreamweaver. I spoke to the technical support agency who manage our remote server but they are saying that there is no problem with the server adn they dont know anythign about dreamweaver so cant assist me.
    I was suggested to check with adobe team directly and i spoke to a technical support person on the live chat but they said since the version is CS4 - education version, they cant assist me at all!! This is just ridiculous...I am constantly being sent from one place to the other without anything getting resolved!!
    Please help somebody!!

    I am having a similar problem... maybe.  I was connected to my remote site all day yesterday, then out of the blue I tried to "put" an edited file... as I had been doing all day, and I received an FTP error:  Cannot make connection to host. Your login or password is incorrect.  That's odd, I've been connecting all day.  So I went into my sites > manage sites and clicked the Test button on my remote server information and it returned Adboe Dreamweaver CS connected to your webserver successfully.  I went back to my file and tried once more to "put" it on the remote server... again FTP Error: cannot make connect to host...  So I reboot my computer and start Dreamweaver CS3 again.  I reenter my remoter server information and click the Test button.  "... connect to your webserver successfully".  I try to put any file, FTP error again.  So I call my server administrator, he checks the servers logs and says there are no errors and you've connected successfully several times today.  I went through the trouble shooting steps listed here, though my FTP Logs are empty.  I cannot stay connected or even see the remote folders to try to drag and drop.  I tried to run ftp from a windows command prompt and it seems to connect me.
    I downloaded an installed an SFTP client and was able to successfully connect to my remote server and upload the files.  It's definately a Dreamweaver problem.  Any suggestions?

  • Best Logging approach when using ALSB

    Hi,
    We are exploring various possibilities for logging with ESB (i am using ALSB version
    3.0).
    I was thinking of using Log4J logging to SysLog (http://wiki.apache.org/logging-log4j/syslog) to capture metrics from different processes.
    I have intereactions in my web application (MyWebApp) where i have to fetch some results from a 3rd party web application (MyWebApp2) and i use the ESB to interact between the 2 applications.
    I can depict the interections to be of the form depicted below.
    Browser --&gt; MyWebApp network request / MyWebApp processing / MyWebApp -ESB network request / ESB processing / ESB-MyWebApp2 network request / MyWebApp2 processing ) -
    How can i capture or measure performance profile ?
    Among other alternatives
    I was thinking if i can use Log4j as a seperate service and can invoke it within the ESB each time i want to log something.
    The only concern i have with this is that it might turn out to be a costly operation.
    Can Some one provide me a quick reply for this as i need to wrap it a bit quickly.
    Cheers
    Edited by: user8352312 on Oct 28, 2008 11:40 AM

    Currently OSB 10gR3 is out! with nice cool stuff (debugging).
    But, you could at logging to your service by applying log actions in your service. This wil generate log information in the log file. Or you could create Alert or Report actions.
    Marc
    http://orasoa.blogspot.com

  • Appending FTP adapter using WLST Script

    Hi Everybody,
    Creating an FTP adapter using wlst script and the adapter is getting created sucessfully in FTP but when trying to creae one more FTP adapter it
    overriding instead of appending the FTP adapter it with new one. Can any help on this please.
    As this is an urgent delivarable which needs to be delivered.
    Regards,
    ChaKra

    Hi,
    I will take it other way as we need to process the Data File not Marker File ( its just for checking the Data File is completely written on FTP server).
    Other way mean " Will Poll for Data.txt File and if  found then Runtime OS Command will do connect to FTP and check if Marker File exists, if yes then delete the marker file and read the actual Data File for processing.
    Please let me know, if Marker File does not exists on FTP folder, will it still read the Data File or will it exit the Adapter execution?
    Your help is much appreciated.
    Regards,
    Anurag

  • Append to remote FTP file using Pharlap

    Hi
    Currently a colleague of mine has managed to write data from our cFP 2020 to a remote file on an FTP server (using the FTP buffer VI in Labview 7.0). However there does not appear to be any way that he can append additional readings to that file. I would like to know if there is a way to append data to the remote FTP file. We are interested in storing 1 minute's worth of 3.3 second data within the remote file. Our SQL server will then import the flat file every minute into the database.
    So my question is, how can I append data readings from my cFP 2020 to remote files on an FTP server?
    --Thor

    Hi Thor,
    You’ll want to look into the NI LabVIEW Internet Toolkit that will allow you to programmatically send and retrieve files from a remote FTP server.
    Additionally, I have attached an example program to demonstrate how to send/retrive files programmatically using the FTP VIs. Note that you will need to have the Internet Toolkit in order to see the FTP VIs.
    Hope this helps. Thanks again.
    Kileen

  • This will stump you! I can not download the PDF stored on my FTP site using Internet Explorer

    I can not download the PDF stored on my FTP site using Internet Explorer, but I can with Chrome, Safari, FireFox etc. Error message: museutils.js Code: 0
    My page: http://creditunionone.org/applications---forms.html
    and this page also: http://petfoodpantryokc.org/get-assistance.html
    Please Help! I am getting 20-30 submissions from members. clients/ customers stating they can not download the forms.
    addition: Pop Up says: Windows Internet Explorer  Errors on this webpage might cause it to work incorrectly. A Security Problem Occured   | museutils.js  Code: 0
    URI: http://www.creditunionone.org/scripts/1.1/museutils.js?110351884

    The links still aren't updated for any of the pages. You need to update the links like this for eg.
    Incorrect link - http://[email protected]/forms/membershipcardstaticpdf.pdf
    Correct link - http://creditunionone.org/forms/membershipcardstaticpdf.pdf
    Select "Download Form" within the Accordion in Design mode and update the links as above. Preview the site in browser (IE) before publish.
    Thanks,
    Vinayak

  • Is it possible to have a secure FTP connection using private key authentication?

    Is it possible to have a secure FTP connection using private key authentication to connect to a folder on Business Catalyst?

    Hi,
    Not available at this stage as the only options can be found in the SFTP set-up article.
    - http://helpx.adobe.com/business-catalyst/partner/connecting-site-using-ftp-client.html
    Kind regards,
    -Sidney

  • HOw to connect FTP Client using flex

        Hi Everyone,
                   i am new to flex, i am developing one flex application, some one give example of connecting ftp client using flex. i didnot found any examples.
    thnx

    You would need to communicate with your ftp server over a socket and implement the ftp protocol on your client. The project below aims to do this, but I have never used it:
    http://maliboo.riaforge.org/
    Why not download over http (and save yourself a lot of time)?

  • Seeburger FTP Pull

    Hi,
    I'm getting a problem when pulling a file with the Seeburger FTP adapter.  The error is logged in the ftp.trc file but I'm not seeing anything in sxmb_moni.  Any body would know where the "pulled" file is temporary stored before being processed by the integration server?
    Rgds,
    Yves

    ok, now it makes a bit more sense, you basically got 2 problems:
    1.) you can't see the file the FTP has picked up
    2.) BIC runs on error
    some suggestions to solve
    1) See page 43 of the SAPXI_FTPAdapter_en.pdf documentation
    Message Dumping
    For debugging purposes, it is possible to dump the complete FTP files to a directory on the SAP XI
    Server.
    Message dumping can be enabled via the J2EE Admin. Go to the “ConnectorContainer” service and
    select the FTP/VAN Adapter. Go to the “ManagedConnectionFactory” tab and then to the “Properties”
    sub-tab. Now the “transmissionDataDump” property can be changed:
    When the save button is clicked, the adapter is restarted and dumping is activated / deactivated.
    Be sure to only use dumping for debugging purposes, since it reduces the performance of
    the FTP/VAN Adapter.
    The dump files are saved to the <your sap installation>/server0/seeburger/ftp/dump directory.
    Another option is, do you use the Seeburger Archiving Solution ? Then you can configure a FileStore before the BIC Module and you'll be able to download the document from the Archive. See SAPXI_Archiving_en.pdf
    2) Total Offset 2409, you can check in the file that your Vendor send you it is probably toward the end of the file. Maybe they have an extra CRLF after the IEA, that would confuse BIC or the VAN adds like an EOF, which can't be processed. Maybe that happens when the VAN is decrypting the Message from AS2.
    Why don't you do AS2 directly with your Trading Partner and save the VAN cost ?
    Regards,
    Andrea

  • How to get file from FTP Server using File Control

    Hi,
    Any one did getting file from FTP Server?
    Please let me know any one help me.
    I would need to get file from FTP Server.
    Thanks,
    Madhu

    Yes I have done that. But In FTP Server I cannt read file, because no previliges. Only I need to copy file from FTP Server to local server then only I can read that file.
    I tried all options using FileConrol(getFiles(),read()).
    getFiles() - It wont copy the file, it give information about file.
    read() - I dont have previliges to read the file.
    Please tell me any other procedure would be there for getting file from FTPServer.
    Thanks,
    Madhu

Maybe you are looking for

  • Logical port for client proxy

    Hi, when consuming a webservice i have to create a logical port and this port will be used when i create an instance of the proxy class e.g. DATA: lo_proxy  TYPE REF TO /ipro/co_bbp_cms_ibf_metadata. CREATE OBJECT lo_proxy EXPORTING logical_port_name

  • Will Photoshop CS6 work with Snow Leopard or must I upgrade to Mountain Lion on the Mac Book Pro?

    I will be purchasing PhotoShop CS6 & installing on my Mac Book Pro. Adobe tells me that I should upgrade to Mountain Lion from Snow Leopard in order for it to work best. Any thoughts on this? Thank you, Paul

  • Why won't my iTunes open after I updated my Mac Mini to iOS 8.1?

    I updated my software to iOS 8.1 and today I opened up my Mac mini, and tried to open iTunes, but it just kept closing out as soon as I tried to open it and I can't open it up... What can I do to fix this?

  • How much bandwidth netflow export uses

    Experts, I tried searching doc on cisco and even googled for information on how much bandwidth netflow export uses; however I didn't find any convincing article. I also found lancope.com where they estimate the BW required, but still I was not satisf

  • Major help of Original Iphone Please some1 ???????

    Hi, I need major help Please.. when was the date the original Iphone 8G discontinued?? and where or how can I get an article that tell the date it discontinue please? I had tried Google but still cannot get any helps. Thanks in advance!