Process TIFF file from FTP server using File/FTP adapter

Hi,
I have a requirement to process a scanned document TIFF file from a directory on an FTP server using the File/FTP adapter and process through XI into a Web Service via a receiver SOAP adapter.
My question is can the file/FTP adapter be used to process the TIFF file into XI from an FTP server ? Also, what settings need to be made on the file adapter to allow this file to be processed into XI ?
Thanks in advance
Colin

hi colin,
TIFF is type of image file, it can be converted to binary using java mapping
refer this pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
regards
Ramesh P

Similar Messages

Transfer a file from App Server to a FTP site.

Hi, Abapers.
I need your help. Probably, this topic has already been posted in a similar way, but we need an answer to solve our problem.
We have to sent a PDF file from a directory of our app server (AIX) to a FTP directory... which would the FM sequence we should use to goal it?
Best Regards.

Hi Santiago,
create fm to send file from APP server to FTP site.
if you want to Post file from desktop to Appl use Transaction - CG3Y
if you want to Post file from Appl to Desktop use Transaction - CG3Z
copy the code below....
* Author: Prabhudas Date: 02/21/2006 *
* Name: Z_FTP_FILE_TO_SERVER *
* Title: FTP File on R/3 Application Server to External Server *
*"*"Local Interface:
*" IMPORTING
*" REFERENCE(DEST_HOST) TYPE C
*" REFERENCE(DEST_USER) TYPE C
*" REFERENCE(DEST_PASSWORD) TYPE C
*" REFERENCE(DEST_PATH) TYPE C
*" REFERENCE(SOURCE_PATH) TYPE C
*" REFERENCE(FILE) TYPE C
*" REFERENCE(BINARY) TYPE CHAR1 OPTIONAL
*" REFERENCE(REMOVE_FILE) TYPE CHAR1 OPTIONAL
*" TABLES
*" FTP_SESSION STRUCTURE ZMSG_TEXT OPTIONAL
*" EXCEPTIONS
*" CANNOT_CONNECT
*" SOURCE_PATH_UNKNOWN
*" DEST_PATH_UNKNOWN
*" TRANSFER_FAILED
*" COMMAND_FAILED
DATA: w_password TYPE zftppassword,
 w_length TYPE i,
 w_key TYPE i VALUE 26101957,
 w_handle TYPE i,
 w_command(500) TYPE c.
REFRESH ftp_session.
* Scramble password (new Unicode-compliant routine)
w_length = STRLEN( dest_password ).
CALL FUNCTION 'HTTP_SCRAMBLE'
 EXPORTING
 SOURCE = dest_password
 sourcelen = w_length
 key = w_key
 IMPORTING
 destination = w_password.
* Connect to FTP destination (DEST_HOST)
CALL FUNCTION 'FTP_CONNECT'
 EXPORTING
 user = dest_user
 password = w_password
 host = dest_host
 rfc_destination = 'SAPFTPA'
 IMPORTING
 handle = w_handle
 EXCEPTIONS
 not_connected = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
 RAISING cannot_connect.
ENDIF.
* Optionally, specify binary file transfer
IF binary = 'X'.
 w_command = 'bin'.
 CALL FUNCTION 'FTP_COMMAND'
 EXPORTING
 handle = w_handle
 command = w_command
 TABLES
 data = ftp_session
 EXCEPTIONS
 command_error = 1
 tcpip_error = 2.
 IF sy-subrc <> 0.
 CONCATENATE 'FTP command failed:' w_command
 INTO w_command SEPARATED BY space.
 MESSAGE ID 'ZW' TYPE 'E' NUMBER '042'
 WITH w_command
 RAISING command_failed.
 ENDIF.
ENDIF.
* Navigate to source directory
CONCATENATE 'lcd' source_path INTO w_command SEPARATED BY space.
CALL FUNCTION 'FTP_COMMAND'
 EXPORTING
 handle = w_handle
 command = w_command
 TABLES
 data = ftp_session
 EXCEPTIONS
 command_error = 1
 tcpip_error = 2.
IF sy-subrc <> 0.
 CONCATENATE 'FTP command failed:' w_command
 INTO w_command SEPARATED BY space.
 MESSAGE ID 'ZW' TYPE 'E' NUMBER '042'
 WITH w_command
 RAISING source_path_unknown.
ENDIF.
* Navigate to destination directory
CONCATENATE 'cd' dest_path INTO w_command SEPARATED BY space.
CALL FUNCTION 'FTP_COMMAND'
 EXPORTING
 handle = w_handle
 command = w_command
 TABLES
 data = ftp_session
 EXCEPTIONS
 command_error = 1
 tcpip_error = 2.
IF sy-subrc <> 0.
 CONCATENATE 'FTP command failed:' w_command
 INTO w_command SEPARATED BY space.
 MESSAGE ID 'ZW' TYPE 'E' NUMBER '042'
 WITH w_command
 RAISING dest_path_unknown.
ENDIF.
* Transfer file
CONCATENATE 'put' file INTO w_command SEPARATED BY space.
CALL FUNCTION 'FTP_COMMAND'
 EXPORTING
 handle = w_handle
 command = w_command
 TABLES
 data = ftp_session
 EXCEPTIONS
 command_error = 1
 tcpip_error = 2.
IF sy-subrc <> 0.
 CONCATENATE 'FTP command failed:' w_command
 INTO w_command SEPARATED BY space.
 MESSAGE ID 'ZW' TYPE 'E' NUMBER '042'
 WITH w_command
 RAISING transfer_failed.
ENDIF.
* Disconnect from destination host
CALL FUNCTION 'FTP_DISCONNECT'
 EXPORTING
 handle = w_handle.
* Optionally, remove file from source directory
IF remove_file = 'X'.
 CONCATENATE source_path '/' file INTO w_command.
CONCATENATE 'rm' w_command INTO w_command SEPARATED BY space.
 OPEN DATASET '/dev/null' FOR OUTPUT FILTER w_command.
 CLOSE DATASET '/dev/null'.
ENDIF.
Regards,
Prabhudas

Problem in downloading file from app server using CG3Y in to .XLS fomat

hi All,
I have uploaded file in to application server through a program using open data set with the separater as "|" ( pipe ) . Now the user should be able to download the file from apps server to presenataion server in .XLS format using txn CG3Y. but when we download, the format appears wierd and the data is not consistent across columns in excel. i.e the data which is supposed to be in one column in the excel is in the other column. what precautaions should i take before moving data to apps server so that it will be downloaded in a good format.
Appreciate your help...
Regards,
Sreekanth.

Separate each values with TAB space present in the application server .
Currently u r using | pipe character. Instead of that use CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB as delimiter.
Each value will displayed in separate cells in excel sheet when u download it frm app.server
Regards,
Lakshman.

Upload xml file from aplication server using read dataset, parser error.

Hi,
I would like to upload xml file from app. server but parser failed. If I upload this xml file from workstation (using ws_upload) it is correct. For uploading xml file from app. server I use open dataset... read dataset. In loop section I remove '#' char. How do You upload xml file from app server? What Could be incorrect.
I try to open dataset in binary mode, text mode...
TYPES: BEGIN OF xml_line,
 data(255) TYPE c,
 END OF xml_line.
DATA: gt_xml_table TYPE TABLE OF xml_line,
 gs_xml_structure TYPE xml_line,
 gv_xml_table_size TYPE i.
OPEN DATASET s FOR INPUT IN BINARY MODE.
IF sy-subrc <> 0.
 MESSAGE e001(zet) WITH '....'.
ENDIF.
DO.
 READ DATASET s INTO gs_xml_structure.
 IF sy-subrc <> 0.
 EXIT.
 ELSE.
 len = STRLEN( gs_xml_structure ).
 len = len - 1.
 check len > 0.
 WRITE gs_xml_structure(len) TO gs_xml_structure.
 APPEND gs_xml_structure TO gt_xml_table.
 ENDIF.
ENDDO.

You Can do this too
parameters: p_file like rlgrap-filename.
data: subrc like sy-subrc.
create object me.
REFRESH t_data.
* Open XML File
CALL METHOD me->CREATE_WITH_FILE
 EXPORTING
 filename = p_file
 RECEIVING
 retcode = subrc.
* Saves Data in an itab from XML File.
CALL METHOD me->get_data
 IMPORTING
 retcode = subrc
 CHANGING
 dataobject = t_data[].
Regards,
Claudio.

Reading File from Application Server using Read Dataset

Hi,
i am trying to read excel file from Application Server and has multiple records in that based on structure below. but when i execute its giving me error message.here is the code, can sumone suggest me on this please ??
FORM f_data_upload .
DATA:
 l_filename TYPE string, "file name
 l_wa_string TYPE string. "file record
 l_filename = p_inp_as. "File path from Application Server
 OPEN DATASET l_filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
 DO.
 IF sy-subrc <> 0.
 EXIT.
 ENDIF.
Read the data from the file in Application server.
 READ DATASET l_filename INTO l_wa_string.
 IF sy-subrc = 0.
 SPLIT l_wa_string AT cl_abap_char_utilities=>horizontal_tab
 INTO w_data-tcode
 w_data-matnr
 w_data-mtart
 w_data-werks
 w_data-vkorg
 w_data-vtweg
 w_data-lgort
 w_data-meins
 w_data-maktx
 w_data-spart
 w_data-kosch
 w_data-mstae
 w_data-brgew
 w_data-ntgew
 w_data-groes
 w_data-matkl
 w_data-prdha
 w_data-mstde
 w_data-mtpos_mara
 w_data-gewei
 w_data-spart
 w_data-mstav
 w_data-mstdv
 w_data-dwerk
 w_data-taxkm
 w_data-versg
 w_data-kondm
 w_data-ktgrm
 w_data-mtpos
 w_data-mtvfp
 w_data-tragr
 w_data-ladgr
 w_data-herkl
 w_data-ekgrp
 w_data-webaz
 w_data-dismm
 w_data-beskz
 w_data-prctr
 w_data-bklas
 w_data-bwtty
 w_data-vprsv
 w_data-verpr
 IN CHARACTER MODE.
 APPEND w_data TO i_data.
 CLEAR w_data.
 ENDIF.
 ENDDO.
 CLOSE DATASET l_filename.
Error Message while executing
What happened?
 At the conversion of a text from codepage '4110' to codepage '4102':
 - a character was found that cannot be displayed in one of the two
 codepages;
 - or it was detected that this conversion is not supported
 The running ABAP program 'ZHDI_LOMM_VEHI_MAT_MASS_CREATE' had to be terminated
 as the conversion
 would have produced incorrect data.
 The number of characters that could not be displayed (and therefore not
 be converted), is 449. If this number is 0, the second error case, as
 mentioned above, has occurred.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
 caught in
 procedure "F_DATA_UPLOAD" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 Characters are always displayed in only a certain codepage. Many
 codepages only define a limited set of characters. If a text from a
 codepage should be converted into another codepage, and if this text
 contains characters that are not defined in one of the two codepages, a
 conversion error occurs.
 Moreover, a conversion error can occur if one of the needed codepages
 '4110' or '4102' is not known to the system.
 If the conversion error occurred at read or write of screen, the file
 name was '/usr/sap/interfaces/conversion/pioneer/ddm/data/test_data1.xls'.
 (further information about the file: "X 549
 24064rw-rw----200812232135082008122307293120081223072931")
Please help me
Thank You

Woah ... perfect guru
but data looks like all junk characters ? its filling with special characters, hashes # and other characters but not with Excel data.. any idea ??
Temesh
Edited by: New2Sap Abap on Dec 24, 2008 6:42 AM

Download files from application server - unknown file name

Hello everybody,
I am working on a report allowing users to download XML files from the application server. All these XML files are created by the SAP system and their names can be found in a table. I can simply use OPEN DATASET for these files, put all file content to a buffer and send them to the GUI with CALL METHOD cl_gui_frontend_services=>gui_download.
The problem is now that some files are touched by an external document management system. These files are moved to another directory and timestamped. The first is no problem since the folder name is always the same and can be replaced before the OPEN DATASET statement. But additionally, the file gets a timestamp, when the filename was xyz.xml before, it now gets xyz.xml.01012008123456123456. As I cannot try all possible values (mircoseconds!), I need a way to search for the right filename on the application server. Is there a function module for this available?
It can always be stated that the former name (xyz.xml) is still a unique prefix, so I don't have to worry that xyz.xml.* will return multiple files.
Thanks in advance for any suggestions.
Christoph

HI!
I copy the function GET_DIRECTORY_FILE. In the eyelash of tables create one structures:
DIR_FILES LIKE ZDIR_FILES
The single structure has component NAME (char 250).
I code of the function that I use is:
FUNCTION zget_directory_file.
""Interfase local
*" IMPORTING
*" REFERENCE(NAME_OF_DIR) TYPE CHAR120
*" REFERENCE(NAME_OF_FILE) TYPE CHAR120 OPTIONAL
*" REFERENCE(SP_CS) TYPE CHAR120 OPTIONAL
*" TABLES
*" DIR_FILES STRUCTURE ZDIR_FILES
DATA: a_dir_name TYPE char120,
 a_generic_name TYPE char120,
 a_must_cs TYPE char120.
a_dir_name = name_of_dir.
a_generic_name = name_of_file.
a_must_cs = sp_cs.
DATA: errcnt(2) TYPE p VALUE 0.
IF a_dir_name IS INITIAL.
 MESSAGE e220. " 'Place cursor on valid line !'.
ENDIF.
CALL 'C_DIR_READ_FINISH' " just to be sure
 ID 'ERRNO' FIELD file_list-errno
 ID 'ERRMSG' FIELD file_list-errmsg.
CALL 'C_DIR_READ_START' ID 'DIR' FIELD a_dir_name
 ID 'FILE' FIELD a_generic_name
 ID 'ERRNO' FIELD file-errno
 ID 'ERRMSG' FIELD file-errmsg.
IF sy-subrc <> 0.
 sy-subrc = 4.
 EXIT.
ENDIF.
file-dirname = a_dir_name.
DO.
 CLEAR file.
 file-name = '*.zip'.
 CALL 'C_DIR_READ_NEXT'
 ID 'TYPE' FIELD file-type
 ID 'NAME' FIELD file-name
 ID 'LEN' FIELD file-len
 ID 'OWNER' FIELD file-owner
 ID 'MTIME' FIELD file-mtime
 ID 'MODE' FIELD file-mode
 ID 'ERRNO' FIELD file-errno
 ID 'ERRMSG' FIELD file-errmsg.
 file-dirname = a_dir_name.
 MOVE sy-subrc TO file-subrc.
 CASE sy-subrc.
 WHEN 0.
 CLEAR: file-errno, file-errmsg.
 CASE file-type(1).
 WHEN 'F'. " normal file.
 PERFORM filename_useable USING file-name file-useable.
 WHEN 'f'. " normal file.
 PERFORM filename_useable USING file-name file-useable.
 WHEN OTHERS. " directory, device, fifo, socket,...
 MOVE sap_no TO file-useable.
 ENDCASE.
 IF file-len = 0.
 MOVE sap_no TO file-useable.
 ENDIF.
 WHEN 1. " end of directory
 EXIT.
 WHEN 4. " filename too long
 MOVE sap_no TO file-useable.
 WHEN OTHERS.
 ADD 1 TO errcnt.
 IF errcnt > 90.
 EXIT.
 ENDIF.
 IF sy-subrc = 5.
 MOVE: '???' TO file-type,
 '???' TO file-owner,
 '???' TO file-mode.
 ELSE.
 ULINE.
 WRITE: / 'C_DIR_READ_NEXT', 'SUBRC', SY-SUBRC.
 ENDIF.
 MOVE sap_no TO file-useable.
 ENDCASE.
 PERFORM p6_to_date_time_tz(rstr0400) USING file-mtime
 file-mod_time
 file-mod_date.
* Does the filename contains the requested pattern?
* Then store it, else forget it.
 MOVE-CORRESPONDING file TO file_list.
 APPEND file_list.
 MOVE file-name TO dir_files-name.
 APPEND dir_files.
 IF a_must_cs = no_cs.
 MOVE-CORRESPONDING file TO file_list.
 APPEND file_list.
 ELSE.
 IF file-name CS a_must_cs.
 MOVE-CORRESPONDING file TO file_list.
 APPEND file_list.
 ENDIF.
 ENDIF.
ENDDO.
ENDFUNCTION.
*& Form filename_useable
 text
 -->A_NAME text
 -->A_USEABLE text
FORM filename_useable USING a_name a_useable.
*--================--
DATA l_name(75).
l_name = a_name.
IF l_name(4) = 'core'.
 a_useable = sap_no.
ELSE.
 a_useable = sap_yes.
ENDIF.
ENDFORM. "FILENAME_USEABLE
With this I obtain all the archives XML of that route in a table
DATA: zfiles LIKE STANDARD TABLE OF zdir_files WITH HEADER LINE.
CALL FUNCTION 'ZGET_DIRECTORY_FILE'
EXPORTING
 name_of_dir = dsn
TABLES
 dir_files = zfiles.
IF sy-subrc = 0.
LOOP AT zfiles .
 IF zfiles-name+0(2) = 'O_' AND
 zfiles-name+2(3) = sy-mandt AND
 zfiles-name+5(1) = '_' AND
 zfiles-name+22(4) = '.xml'.
 file = zfiles-name.
endloop.
endif.
I hope this helps you.
Regards.

Cant do a file get from external server using file sender adapter with ftp

Hi all,
Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
I have a requirement to do an ftp file get from an external server
From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues and communications are fine
Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
No messages appear in the RWB
Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
Regards,
Mike

Thanks for your responses.
I have found the error messages in the File Adapter Monitor
Scenario 1
When I prefix the source directory with a forward slash, eg /Folder/Subfolder the error message is as follows
EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified
Scenario 2
When I DO NOT prefix the source directory with a forward slash, eg Folder/Subfolder a different error message is returned
Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified
At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
Questions
I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
I thought that being a Sender adapter it would inherently execute a Pull or Get command
To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
Has anyone experienced these issues?
Please advise on next course of action?
Regards,
Mike

How to get file from FTP Server using File Control

Hi,
Any one did getting file from FTP Server?
Please let me know any one help me.
I would need to get file from FTP Server.
Thanks,
Madhu

Yes I have done that. But In FTP Server I cannt read file, because no previliges. Only I need to copy file from FTP Server to local server then only I can read that file.
I tried all options using FileConrol(getFiles(),read()).
getFiles() - It wont copy the file, it give information about file.
read() - I dont have previliges to read the file.
Please tell me any other procedure would be there for getting file from FTPServer.
Thanks,
Madhu

Help Downloading a file from a server using FTP with only URL methods

Hi All
I have written this code and it is not working I dod not know why the download is not working please help is there anything that's missing?
* Download the file
public void download(String fileName, String destination)
       BufferedInputStream bis = null;
       BufferedOutputStream bos = null;
      // File destDir = null;
       try
           String urlString = "ftp://"+userName+":"+password+"@"+hostName+"/"+fileName;
           URL url = new URL(urlString);
           URLConnection conn = url.openConnection();
           conn.setDoOutput(true);
     conn.setDoInput(true);
           conn.connect();
       //set the destination directory
       File destDir = new File("U:\\2004\\"+fileName.trim());
        System.out.print("\n\n");
        System.out.print("Destination set to :" +destDir);
        System.out.print("\n\n");
          bis = new BufferedInputStream( conn.getInputStream() );
          bos = new BufferedOutputStream( new FileOutputStream(destDir.getName()));
          System.out.print("get file name :" +destDir.getName());
          System.out.print("\n\n");
          int i;
          while ((i = bis.read()) != -1)
             bos.write( i );
          System.out.println("Trying to download...");
          bis.close();
          bos.close();
       catch (IOException ie)
     System.out.println( "Input not available" );
This is what I get after runing this code.
get umlcourse.txt U:\2004
Destination set to :U:\2004\umlcourse.txt
get file name :umlcourse.txtTrying to download...

AceV wrote:
     String urlString = "ftp://"+userName+":"+password+"@"+hostName+"/"+fileName;
You probably need to specify the transfer mode. For example:
String url = "ftp://sam:spade@ftphost/myfile.txt;type=a";
// Specify type=i for binary.

Fetch excel file from app. server using open dataset...

Hello Experts,
Our functional consultant is asking me if it possible to get an excel file from the
application server file using OPEN dataset and in background mode? If yes, Please tell me on how to do this.
Thank you guys and take care!

Hi Viraylab,
to download this the procedure:
you can use the FM 'EXCEL_OLE_STANDARD_DAT ' for this purpose.
this FM 'EXCEL_OLE_STANDARD_DAT' can be used to start Excel with a new sheet and transfer data from an internal table to the sheet.
Here are some of the parameters:
file_name: Name and path of the Excel worksheet file e.g. ?C:TEMPZTEST?
data_tab: Name of the internal table that should be uploaded to Exvcel
fieldnames: Internal tabel with column headers
How to build the field names table:
data: begin of i_fieldnames occurs 20,
field(60), end of i_fieldnames.
i_fieldnames-field = ?This is column 1?. append i_fieldnames-field.
i_fieldnames-field = ?This is column 2?. append i_fieldnames-field.
to upload follow this:
OPEN DATASET dsn FOR INPUT IN BINARY MODE.
DO.
READ DATASET dsn INTO itab-field.
IF sy-subrc = 0.
APPEND itab.
ELSE.
EXIT.
ENDIF.
ENDDO.
[/code]Rob
or Try this function module.
FILE_READ_AND_CONVERT_SAP_DATA
pass 'XLS' to I_FILEFORMAT..
Dont forgot to Reward me points .....All the very best....
Regards,
Sreenivasa sarma K.

To access pdf files from application server using web.show_document

Hello!
If my pdf file is copied in Oracle_home/forms90/java directory.Then using web.show_document i can access the pdf file.But I can't copy all the pdf files in /forms90/java directory.We have lacs of pdf files which I want to keep in my own directory.But my requirement is if my pdf file is in /home2/docs directory in (Linux application server) ie in my own directory where I store all the pdf files.Then web.show_document does not open the pdf file.It says page cannot be displayed.For that I think we have to configure the directory /home2/docs directory as a webserver.From otn I got something like forms90.conf file in application server where we have to set virtual directory mapping etc.If the pdf is in local machine then in orion-web.xml file we have to mention real path and save the file and shutdown oc4j instance and restart it again.I tried it.But it is not working.Can u give me step by step instructions to solve this problem.I found a few links in discussion forum.But is doesn't work out.My pdf file is in /home2/docs directory in Linux application server.Please treat it as urgent.
Regards
Jayashree

Hi Sandeepmsandy,
There is no available code sample for this scenario. You may write your own.
Step 1: Get pdf URL from sqlite database. Please refer to the following MSDN blog and see a code sample.
http://blogs.msdn.com/b/robertgreen/archive/2012/11/13/using-sqlite-in-windows-store-apps.aspx. Note, you need to retarget the project to 8.1 and then get two sqlite packages from NuGet before building this sample.
Step 2: Use some special classes to get file from serer.
HttpWebRequest can help download small pdf files. For more information to see
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/de96a61c-e089-4595-8349-612be5d23ee6/download-file-with-httpwebrequest?forum=winappswithcsharp. It’s easy for use, but if you want to download the larger or many files, it’s recommend to use
BackgroundTransfer namespace. The classes in this namespace provide a power way to transfer files in the background. See a code sample from MSND.
https://code.msdn.microsoft.com/windowsapps/Background-Transfer-Sample-d7833f61.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

How to Download a file from web server using servlets

how do we download a file from Java Web Server connecting to oracle database
it should start as soon a i click a button in my html browser
please reply as it is needed to complete my project to submited to the collage

With SQLJ you can do it.
When you look at:
http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/files/basic/basic.htm
or
http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/files/advanced/advanced.htm
There are samples for reading LONGRAW / BLOB from Database. If you want use it in servlet you have to pass the result to the responce object, set the correct mime-type and set the response.setContentLength( xx). This is for some PlugIns nessessary (pdf).
regards Dietmar

How to add header line in a file from XI system using file adapters

Hi All,
I need to add header line (Column names) in a file coming from XI system.
I am using file adapters.
Thanks & Regards,
Gaurav Mittal

The Receiver File Adapter is configured, using the following settings:
1) Choose File Content Conversion as the Message Protocol.
2) You give the addHeaderLine parameter as 1
3) For the fieldSeparator parameter you need to give field separator for both list and substructure (referring to the data type above). For eg: it may be a , (comma) for substructure in a comma separated file.
4) The endSeparator parameter needs to given for substructure only. For eg: it may be a nl (new line)
5) Give the file name, the directory and the Construction mode. Activate all the settings. Receiver File Adapter with F.C.C. is configured.
please visit the blog.
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2

How can I get file from multiple instance using file adapter

Hi.
Our system(PI7.1) have three application instances running with each physical servers.
We use sender file adapter.
The file data is sent to one of the servers.
Now, how can I get the file using three file adater?
Should I put the file "sapmnt(\usr\sap)" .
Or are there another solution?
regards,

Hi Ashutosh
You will have to use sapcar.zip which contains the utility Sapcar.exe utility for unzipping the files from SAP compressed files. (*.car file)
Regards
Gaurav
PS: Reward points if solved

HT4413 Migrating files from old mac using Sata ide adapter

Im trying to migrate files from my old mac hard drive (old mac isnt working- just hooked up hard drive to sata ide adapter) --- when I go to Migration Assistant, "select your disk" it just keeps thinking, it doesnt pull anything up. When just plugging in the sata adapter, it doesnt come up automatically to run either. I have used this adapter before with this old harddrive, so I know it works (I had help the last time)....I just cant figure it out this time. Please help

You cannot use Migration Assistant. When you connect the old HDD, does it appear on the desktop of the MBP. If it does, you will have to transfer the files manually.
If not, does it appear in Disk Utility? Post a screen shot such as this:
Ciao.

Process TIFF file from FTP server using File/FTP adapter

Similar Messages

Maybe you are looking for