Ftp to a local ftp server doesn't work for VIREX 7.7

Has anyone else experienced this and know of a work-around? I have mac 10.3.9 machines not connected to the internet and running Virex 7.7. I have them setup to access signature files I download to a local ftp server on our subnet. This works fine.
We've installed a couple of Tiger (10.4.4) machines and this setup for Virex does not work. It acts like it can't see the ftp server. When I use Terminal I can ftp to the ftp server and transfer files that way. Why doesn't Virex 7.7 successfully download signature files from the ftp server?
Any suggestions?

I have been having the same problem. Our McAfee rep sent me a patch that apparently fixes the problem. Since McAfee issues DATs on Wednesdays, I ran the the e-update yesterday morning. It all seemed to run too quickly, but I checked the dates of the vscan files and they were correct. The files are:
names.dat
clean.dat
scan.dat
They located in /usr/local/vscanx/ (hidden files - you can download "Wizzard" to show/hide files).
I believe you can download the patch at:
ftp://custftp2.nai.com/outgoing/tier3/VRX/HF255495.sit
ftp://custftp2.nai.com/outgoing/tier3/VRX/HF255495.tar
ftp://custftp2.nai.com/outgoing/tier3/VRX/HF255495.zip
iMac Mac OS X (10.4.5)
iMac Mac OS X (10.4.5)

Similar Messages

Reload automation server doesn't work for all steps

Hi all,
I'm creating ActiveX Servers using Visual Basic 6. In TestStand 3.1 I have steps that call methods from an automation server and I have steps that get properties of an automation server.
When I create a new version of an automation server, I open one of the steps that use the automation server and press "Reload", so that is uses the latest version. TestStand Automatically updates all the rest of the steps that use the same automation server, but for some reason it only updates the steps that call a method and not the steps that Get a property. Why is this?

Frank -
When you configure a TestStand step to call an automation server, it stores the specific ID information for the server and the class and method/property that you are calling. If the server is created with MSVB the compatibility mode of the project defines whether MSVB alters this information after each recompile of the project. TestStand tries to find the server, class and method/property after you compile the project each time. If you take a look at the Compatibility Options for Visual Basic section in Chapter 5 of the TestStand 3.x Reference Manual you will find more information on this. The section describes the various compatibility modes Visual Basic projects. In a nut shell, it is recommended to use Project Compatibility while developing code and switch to Binary Compatibility when you release a system. When you switch to Binary Compatibility you should keep it there and only add new methods or classes. You should not change the names or prototypes of existing methods or properties for this breaks binary compatibility. In my previous development, it would have been nice if VB exposed the control of these IDs, but they do not.
Scott Richardson
National Instruments

Mail server doesn't work after upgrading from SL to ML

My Mail server doesn't work after upgrading from SL to ML
Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
the problem seems to be related with dovecot ... in my smtp log i get this:
relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
Any Ideas?
Cheers
Carlo
This is my postconf -n info:
server:Data admin$ postconf -n
biff = no
command_directory = /usr/sbin
config_directory = /Library/Server/Mail/Config/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /Library/Server/Mail/Data/mta
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
dovecot_destination_recipient_limit = 1
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
inet_interfaces = all
inet_protocols = ipv4
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 20971520
mydestination = $myhostname, localhost.$mydomain, localhost
mydomain = moremoremore.it
mydomain_fallback = localhost
myhostname = server.moremoremore.it
mynetworks = 127.0.0.0/8,192.168.178.0/24
newaliases_path = /usr/bin/newaliases
queue_directory = /Library/Server/Mail/Data/spool
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost = mail.mclink.it
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_auth_enable = no
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
server:Data admin$

if this could help:
mail:setStateVersion = 1
mail:readWriteSettingsVersion = 1
mail:connectionCount = 11
mail:servicePortsRestrictionInfo = _empty_array
mail:protocolsArray:_array_index:0:status = "ON"
mail:protocolsArray:_array_index:0:kind = "INCOMING"
mail:protocolsArray:_array_index:0:protocol = "IMAP"
mail:protocolsArray:_array_index:0:state = "RUNNING"
mail:protocolsArray:_array_index:0:error = ""
mail:protocolsArray:_array_index:1:status = "ON"
mail:protocolsArray:_array_index:1:kind = "INCOMING"
mail:protocolsArray:_array_index:1:protocol = "POP3"
mail:protocolsArray:_array_index:1:state = "RUNNING"
mail:protocolsArray:_array_index:1:error = ""
mail:protocolsArray:_array_index:2:status = "ON"
mail:protocolsArray:_array_index:2:kind = "INCOMING"
mail:protocolsArray:_array_index:2:protocol = "SMTP"
mail:protocolsArray:_array_index:2:state = "RUNNING"
mail:protocolsArray:_array_index:2:error = ""
mail:protocolsArray:_array_index:3:status = "ON"
mail:protocolsArray:_array_index:3:kind = "OUTGOING"
mail:protocolsArray:_array_index:3:protocol = "SMTP"
mail:protocolsArray:_array_index:3:state = "RUNNING"
mail:protocolsArray:_array_index:3:error = ""
mail:protocolsArray:_array_index:4:status = "OFF"
mail:protocolsArray:_array_index:4:kind = "INCOMING"
mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
mail:protocolsArray:_array_index:4:state = "STOPPED"
mail:protocolsArray:_array_index:4:error = ""
mail:protocolsArray:_array_index:5:status = "OFF"
mail:protocolsArray:_array_index:5:kind = "INCOMING"
mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
mail:protocolsArray:_array_index:5:state = "STOPPED"
mail:protocolsArray:_array_index:5:error = ""
mail:startedTime = "2013-01-21 21:18:32 +0000"
mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
mail:logPaths:SMTP Log = "/var/log/mail.log"
mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
mail:servicePortsAreRestricted = "NO"
mail:state = "RUNNING"
mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

Local Web Server No Longer Working In ML

Hello,
Previous to updating to Mountain Lion, I had my Imac set as a local web server and everything worked fine. After updating to ML, I no longer have local web server access. Also seems that my /etc/apache2/users/USERNAME.conf is gone? Do I need to reset all the files I configured prior to installing ML?
Thanks JR

I created a new ect/apache2/users/currentuser.conf with
<Directory "/Users/username/Sites/">
      Options Indexes MultiViews
      AllowOverride All
      Order allow,deny
      Allow from all
</Directory>
But now when I try to view a current site on the Mac, it just lists out the php code and not the page?
Thanks JR

SMS doesn't work for non-local phone number

Moved to http://supportforums.blackberry.com/t5/Java-Development/SMS-doesn-t-work-for-non-local-phone-number/...

Hi iantra123,
Just make sure you make the SIP-Phone use G711ULAW
https://supportforums.cisco.com/thread/2074398
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmefac.html
Kindly rate the post accordingly.
Regards,
Kevin

I configure the JServ , but Oracle HTTP Server doesn't work agian

my Oracle HTTP Server doesn't work after i've configured the JServ by Oracle Enterprise Manager.
when i run flowing command :
D:\oraias\dcm\bin>dcmctl getstate -v
and Error message : "ADMN-100999 Base Exception:
java.lang.ClassCastException:java.lang.Boolean" has shown.
and i navigate Enterprise Manager web site these Error Message showing:
"Your browser or operating system is not a supported client configuration for this version of Enterprise Manager. Using Enterprise Manager with your current client configuration may result in incorrect display of data or incorrect updates to configuration settings. See the release notes for information on supported client configurations. Root Cause: java.lang.Boolean. java.lang.Boolean"
how can i do? please help me.
THX

The key message -
mod_plsql: /pls/htmldb/htmldb_login HTTP-503 ORA-12541
Looking up that error gives -
[jes@spdb1 ~]$ oerr ora 12541
12541, 00000, "TNS:no listener"
// *Cause: The connection request could not be completed because the listener
// is not running.
// *Action: Ensure that the supplied destination address matches one of
// the addresses used by the listener - compare the TNSNAMES.ORA entry with
// the appropriate LISTENER.ORA file (or TNSNAV.ORA if the connection is to
// go by way of an Interchange). Start the listener on the remote machine.So it looks like the listener isn't running for your database to me (i.e. "lsnrctl start")

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
Sai

In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

Central Autoreaction Method doesn't work for NW 7.10 in SolMan 7.01

Hello!
The central autoreaction method doesn't work for the satellite system
NW 7.10. For systems with kernel releases 4.6D, 640, 700 this method
works fine and e-mail alerts are coming.
The configuration steps I've checked:
1. Configured SCOT. The mail_send job executes every 5 minutes.
2. Background dispatching job is released: SAP_CCMS_MONI_BATCH_DP (In
central CEN/000/DDIC and satellite system SAT/000/DDIC)
3. Central dispatching job is released: SAP_CCMS_CENSYS_DISPATCHER
(Only in central system CEN/000/DDIC)
4. The sapccm4x-agent registered as web service within CEN using
Create Remote Monitoring for NW 7.10:
Connection test to SAPCCM4X.<satellite_host>.00 was performed successfully
5. Created a new autoreaction method by copying method
CCMS_OnAlert_Email_V2 to the own Z_CCMS_Email_Alert_CEN:
Function Module - SALO_EMAIL_IN_CASE_OF_ALERT_V2
Execute Method on Any Server and Only in Central System, triggered by
CCMS agents
SENDER (EMAIL_USER) exists in CEN/000 , RECEPIENT - <distr list
SAP_BASIS in CEN/000>, RECIPIENT-TYPEID - C
6. Got MTE Classes from NW 7.10 satellite system and assigned this method
Z_CCMS_Email_Alert_CEN to an MTE-class CCMS_ORAucPSAPSR3 for NW 7.10
satellite system. The alert is red right now.
7. The mail_send job doesn't send anything, in SCOT there are no
sending orders.
8. Autoreaction status on this alert in CEN in RZ20 - Sent to CEN.
CEN_CHECKED.
9. The alert status in RZ20 in CEN - ACTION_REQUIRED. If I execute it
in manual the alert status changes to ACTIVE, but no email and no
messages in sending orders in SCOT.
Please help me to solve this issue.
Thank you!

Hi,
Since you are using RECIPIENT-TYPEID =C i.e. General distribution list, pls ensure to have shared type of list created in SBWP.
Also pls verify your SCOT configutaion , if apropriate address area i.e. *@abc.com
Also one point to note that even if you trigger auto reaction method manually via RZ20 , pls check if alert is listed in SOST.
if yes , that means there is problem in either SCOT configuration or distribution list.
If alert is not appearing in SOST , that means you need to check auto reaction method parameters;
Z_CCMS_OnAlert_Email_V2 , here check release section if Auto reaction execution method is checked.
Regards,
Rupali

The enclosure in RSS feed doesn't work for Itune

I subscribed to my podcast rss feed to ITune, which was valid and had been tested successfully with other aggregator such as Ipodder, however, it doesn't work for ITune. When I hit "get" button next to my podcast name, I always get "!" sign in front of the name, and when I clicked it, I got error message "There was a problem downloading 'XXXXX'. The network connection could not be made".
I'm not sure if this problem resulted from the "rewrite" function I used on my podcasting server in order to track the downloading. Here is how it works: When a mp3 file is requested, my web server will redirect the request to another asp.net program to do something and then redirect to the real mp3 file for downloading. Can it be problem in Itune? But I can use this enclosure url to download this mp3, and also the Ipodder works file with this rss feed.
Any help will be appreciated.
Leo
Windows XP

Thanks for your reply.
However, according to the iTune specs as following,
Tracking Usage
Please note that iTunes does not provide usage statistics. Some podcasters have created mechanisms for tracking the number of times that each episode has been downloaded. iTunes does not provide support in how to track downloads, but the following notes may be helpful:
* 302s will be followed to a depth of 5 redirects and will not update the feed URL in the directory.
* The URL before the GET-style form values (before the first ?) must end in a media file extension (e.g. mp3). To work around this, the feed provider can alter their URL from this:
http://www.podcaster.com/load.php?f=&Wipeout.php
to this:
http://www.podcaster.com/load.mp3?f=&Wipeout.mp3
Notice how it says load.mp3 instead of load.php. It should be possible to accomplish this via various means, such as web server rewrites. iTunes looks at the extension of the path part of the url, i.e. the part before the”?”.
The http request redirection is allowed as long as the appropriate file extension such as ".mp3" is used.
By the way, I tested it with "no redirection" version, which worked fine.
Leo

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

Push notifications doesn't work for apps like (fb viber , whatsapp etc ) iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

Sorry, I've forgotten the actions done.
I've restarted the iphone, and I've recovered a previous backup.
Thanks.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

Did you fail to look at the requirements before purchasing?
All sales are final. You can try contacting itunes support and asking for an exception

Ftp to a local ftp server doesn't work for VIREX 7.7

Similar Messages

Maybe you are looking for