FTP to FTP scenario. Pls advice urgent
Hi,
I have FTP to FTP scenario.
Do I need to install FTP server on both
Sender and Receiver File Systems
Regards
Hi Aashish,
Since my Sender File System and Receiver File System are different:
1. I will install FTP Server A on Sender File System.
2. I will install FTP Server B on Receiver File System.
3. I will open the port for FTP request -- Port 21
4. I will open the port for FTP response -- Port 21
5. I will provide all authrozaitions
Pls let me know if anything missing
Similar Messages
-
UDF in message mapping instead of Java Mapping. Pls advice urgent
Hi All,
My scenario
CRM --- XI -- CRM
In XI I have to open socket connection.
Pls refer link:
/people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
Can Java Mapping code given in above link for socket connection can be used in Message Mapping (CRM -- CRM)UDF?
Pls advice urgent
RegardsHi Henry,
I understood your requirement.
But as per the architecture of XI/PI some message has to trigger your scenario.
In this case there is no adapter where you can directly communicate with CRM system.
Do one thing configure a dummy scenario on the sender side.
Use File adapter for simplicity. once it pools the file with some dummy data in the file it comes to Interface mapping(message mapping) of the PIPELINE steps. Now use the code as you mentioned above(within UDF) for opening socket to CRM system and implement you business logic within that program and write the response to target interface which will infact talk with CRM system.
Dont forget to do the coding in an infinite loop with some delay (if required). Other wise every time you have to put a message for File Adapter for triggering purposes.
You can also acheive the same if you use Java Mapping instead of Graphical mapping with UDF(code for Opening socket and business logic). I suggest you to use Java Mapping.
I dont know how you will comunicate with CRM system on receiver side.?
Thanks,
Gujjeti -
Webservice sender and Receiver. Pls advice urgent
Hi All,
My Scenario
System A (WebService) -- XI -- System B (WebService)
Pls let me know
1. What does it mean by WebService needs WebServer?
2. For System A (WebService) -- XI
Do I require WebServer to be installed at System A or XI?
3. For XI -- System B (WebService)
Do I require WebServer to be installed at System B or XI?
Pls advice urgent.
RegardsHi Piyush,
Hi Piyush,
System A (WebService) -- XI --- System B (WebService)
I know the flow -- like both webservices will be impoted as External Definations and will me mapped.
I was asking about Webserver.
a. XI --- System B (WebService)
System B is providing wsdl.
WebServer is required at System B -- fine.
b. System A (WebService) -- XI
System A is providing WebService(wsdl) to XI
XI is NOT providing WebService to System A.
So It is a webservice(wsdl) of System A. It will be given to XI and XI will import it as wsdl.
So do we or not require require Webserver in
System A or XI?
Pls tell System A (WebService) -- XI
Webserver part.
Regards -
HTTP adapter. Pls advice urgent
Hi,
Some cleint wants to send data to PI (7.0) through HTTP.
Now should that client send through HTTP or it can also use
HTTPS.
Pls advice urgent.
RegardsHi,
All XI runtime components using the HTTP protocol support the encryption of the HTTP data stream by means of the SSL protocol, also known as HTTPS. HTTPS data streams are completely transparent to the Exchange Infrastructure
HTTPS (Hyper Text Transfer Protocol Secure) is a secure version of the Hyper Text Transfer Protocol (http). Secure means of transferring data using the https protocol in the World Wide Web where secure ecommerce transactions, such as online banking transactions and other financial transactions are involved.
Https encrypts the session with a digital certificate i.e., HTTP over SSL (Secure Sockets Layer) which can be used by Web browsers and HTTPS - capable client programs.
If the website begins with https:// instead of http://, it is a secure site. Almost 99% of the browsers can connect to web servers either using http or https. The address bar in the browser will begin with https instead of http, if a web site is secured.
HTTPS Protocol work with the combination of programs including the browser programs which takes care of the encryption/decryption routines that exist on the web hosting servers.
HTTP data is sent over TCP/IP port 80, whereas HTTPS data is sent over port 443.
HTTPS comes in two flavors, both ensuring the confidentiality of data sent over the network
1)Server authentication :
Only the HTTP server identifies itself with a certificate that is to be verified by the client.
2)Client authentication:
Additionally, the HTTP client identifies itself with a certificate that is to be verified by the server
Regards,
sangeetha -
HTTP Synchronous Scenario. Pls advice urgent
Hi All,
My scenario
System A -- XI --- System B
This is Synchronous HTTP scenario.
I tested in XI RWB.
a. I took Message Mapping Source xml structure and sent from RWB it worked fine.
b. I took xsd of Request Data Type and sent from RWB it shows error
"MAPPING">EXCEPTION_DURING_EXECUTE"
Now In real scenario System A will send data to XI.
So does it mean that I need to send Message Mapping Source xml structure to System A and not xsd of Request Data Type
Pls advice
RegardsHi,
Check the message status in SXMB_MONI and let me know the trace and error message.
the below message shows that there is some problem in mapping, u have not done the correct mapping between source and target.
EXCEPTION_DURING_EXECUTE"
test the message in message mapping using test tab and let me know the result.
chirag -
WebService Receiver Problem. Pls advice urgent.
Hi All,
I have R/3 (RFC) -- XI -- R/3(WebService) Scenario.
Now when I test my WebService in R/3 using wsadmin command it works fine.
But If I import my webservice as wsdl file and use it in Soap Receicer Adapter and use XI I get error:
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: sapd03ci.alkhaliji.bank</SAP:AdditionalText>
Pls advice very urgent
regardsHi RAC,
May I know where this R/3 webservice located.
In your landscape or not?
Thanks
Gujjeti -
XI to WebService . Pls advice urgent
Hi All,
Scenario:
There is some response from System A back into XI.
I need to send response from XI to System B and get response back to XI.
System B has Synchronous Web Service and has provided its WSDL to XI.
Question:
1. Do I need to Import Webservice WSDL as External Defination in XI.?
2.Do I need to use only Soap Receiver Adapter in XI as it is Synchronous Web Service and XI can get response back from that System or also I need Soap Sender Adapter ?
RegardsHi Sudeep,
I am sending this xml from runtime workbench:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_REQ_TEST xmlns:ns0="http://CRM">
<MobileNo>1</MobileNo>
<Message>2</Message>
<ActivationCode>3</ActivationCode>
<StrService>4</StrService>
<StrFrom>5</StrFrom>
<StrOptions>6</StrOptions>
</ns0:MT_REQ_TEST>
The below XML forms after mapping
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:SendMessageSoapIn xmlns:ns1="urn:MMWebSrvService">
<strFrom>XI</strFrom>
<strTo>1</strTo>
<strMessage>2</strMessage>
<strSubject>3</strSubject>
<strService>abc</strService>
<nOptions>0</nOptions>
</ns1:SendMessageSoapIn>
In Soap Receiver Adapter
URL -- http://172.20.80.11/MMWebService/MMWebSrv.asmx
Soap action -- #SendMessage
The error I am getting now:
<SAP:AdditionalText>soap fault: Server was unable to read request. ---> There is an error in XML document (1, 97). ---> <SendMessageSoapIn xmlns='urn:MMWebSrvService'> was not expected.</SAP:AdditionalText>
Pls advice
Regards -
Same Sender and Receiver File Name. Pls advice urgent
Hi All,
My sender file name is auto generated number so
it is dynamic in nature.
ex. "abc1.txt"
"abc2.txt"
Now In my Sender File Adapter I cannot give
File Name hard coded as my sender file name is auto generated number.
Also I want same file name received at receving end.
File Sender -- "abc1.txt"
File Receiver -- "abc1.txt"
File Sender -- "abc2.txt"
File Receiver -- "abc2.txt"
Pls advice.
RegardsHi Rider,
All your sender files have .txt extension but the name is not constant(dynamic in nature).Than in this case to pick ur file u can use the *.txt as ur sender file name.Than all the files with .txt extension in the source folder specified would be picked.
Than u can proceed in the same way given in this blog
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Please let me know if u need any information
Thanks,
Bhargav
Note:Award points if found useful -
Synchronous Scenario. How to reduce time. Pls advice urgent.
Hi All,
I have Synchronous Scenario. It has no BPM , simple synchronous scenario (HTTP --- Webservice).
It is taking 10 seconds. How can I reduce time of this scenario.
Pls adviceHi,
The Time Consumption is based on below factors
1. the amount of data to be processed across the interface.
2. The response time of Receiver system
3. Type of Mapping used and implementations of any complex logics with Advanced UDFs etc
4. Hardware configurations
5. Resource Consumptions etc.
please refer below fine tunning docs.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/489f5844-0c01-0010-79be-acc3b52250fd
XI Performance Benchmarks ?
Thanks
Swarup -
Certificates installtion . Pls advice urgent
For File --XI --- File Secure scenario with FTPS
I am reading this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
Pls explain me following Points:
1.Do In the visual admin of XI I need to make Server Public and Private keys. ?
2.Where in Receiver and Sender File Systems we will store XI Public key.?
3.Where in XI system we will store Receiver and File System Public Key.?
4. Any Certificate setup needed in XI.
Thanks in advanceHi,
The following are the answers:
1.Do In the visual admin of XI I need to make Server Public and Private keys. ?
yes. Depends on whether you are sender or receiver. If you are using receiver channel, then you will be provided (by the end system) with the public key and the CA certificate. You will have to install them in your key storage. If you are using the sender channel, then you will be generating the private and public key and then provide the public to the system which is sending the data to you.
2.Where in Receiver and Sender File Systems we will store XI Public key.?
You need not worry about where the receiver and sender file system (end systems) store the keys. In XI, you will be storing on the local file server and then upload them to the Key storage.
3.Where in XI system we will store Receiver and File System Public Key.?
In the key storage in the visual admin.
4. Any Certificate setup needed in XI.
yes. you will have to mention the key store name in the channel and in the sender/receiver agreements, you will have to mention that you are using certificates for authentication.
Hope this helps.
Cheers,
Sarath.
Award points if helpful. -
Alerts. Pls advice urgent
Hi All,
I have 2 BPMs scenarios in which I am getting data from different system and sending resposne back to different systems.
Pls let me know can I use Michael Blog
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
for alerts like if sender/receiver services are down, if mapping errors are there for different transformations in 2 BPMs.
Can I use the above blog only and can I avoid Alert's Container Opertaion and Control Step in BPM?
Also pls let me know how to send emails from alerts.
What setting I have to do in Alert Category.Pls send link/blog for that.
RegardsHi,
First start by creating the alerts with this BLOG
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Have a look at this SAP help file while creating the Container variables in the above Blog
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
To send email to mail box automatically when alert occurs in XI
Can you check whether the below authorization is given to that user.
For the sending of alerts via external communication methods (e-mail, sms, fax) and for inbound processing, an RFC user has to be created on the central alert server with the role SAP_BC_ALM_ALERT_USER. The authorization objects contained in this role are S_OC_SEND and S_RFC.
refer the help:
http://help.sap.com/saphelp_nw04/helpdata/en/b2/de0741375cf16fe10000000a1550b0/frameset.htm
also
check in ALRTCATDEF transaction what is the user maintained under the fixed receipent tab for that user check the email address in SU01 transaction.
Please check in transaction SCOT (you can give address of your SMTP server in order to send mails),
If it is configured then probably you need to personalized alert delivery. In alert inbox you can select personalized alert delivery and check for "Mail" option.
In SCOT you can see how many mails have beed sent via your XI system.
most of the time email problem is solved by correcting configuration in SCOT. For testing mail system click on System->short message and then send one message to yourself
Regards
Seshagiri -
HTTP Sender and HTTP Receiver adapter. Pls advice urgent
Hi All,
There is one Third Party that wants to send XML data and receive XML data with XI.
Please let me know can I use HTTP for that.
How to use HTTP Sender part?
How to use HTTP Receiver Adapter?
Pls send blogs/doc for that
Thanks and Regardshi.,
Check this thread for the code for a HTTP Client,
/message/266750#266750 [original link is broken]
Also, check these blogs. They use HTTP adapters for their configuration,
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Weblog :
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
note:reward points if solution found helpfull.....
regards
chandrakanth.k -
Simple file to file transfer. Pls advice urgent
Hi All,
I have Simple file to file transfer.
There are text files at source side that need to send at receiver side.
Source text files name are different so I have used
Adapter Specific Attributes for Sender and Receiver Adapetrs
Question
As these are text files and there is no mapping required what interface name should I give at Sender Aggrement and
at Interface Determination.
Pls describe steps
RegardsRider,
Its very simple scenario. For ur satisfaction I did the same, it's working perfectly. I don't know what mistake u did. Let me give the complete picture.
Step1: Create new Scenario
Step2: Create new Business Service, let say File_BusService
Step3: In File_BusService add the outbound and Inbound Interface name and namespaces , like
Outbound Interface: MyInterface
Outbound Interfacenamespace: http://my-own-namespace.com
Inbound Interface: MyInterface
Inbound Interfacenamespace: http://my-own-namespace.com
Step4: Create two communication Channels under File_BusService
Step5: Receiver Determination.
Sender:File_BusService
Outbound Interface: MyInterface
Outbound Interfacenamespace: http://my-own-namespace.com
Configured Receivers
File_BusService
Step6: Interface Determination.
Sender:File_BusService
Outbound Interface: MyInterface
Outbound Interfacenamespace: http://my-own-namespace.com
Inbound Interface: MyInterface
Step7: Receiver agreement
Receiver Service: File_BusService
Inbound Interface: MyInterface
Receiver Comm.channel
Step8: Sender Agreement.
Sender:File_BusService
Outbound Interface: MyInterface
Outbound Interfacenamespace: http://my-own-namespace.com
Sender Comm.channel.
raj. -
User Defined Function (UDF) help required. Pls advice urgent.
Hi ,
CRM -- XI (UDF) -- Socket Connection
Now in User Defined Function (UDF) of Message Mapping I will open Socket Connection.
Send CRM XML request to socket and get XML response from Socket and then map to some system.
Can I write Java Class code in User Defined Function (UDF) of Message Mapping instead of Java Mapping in blog below?
/people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
RegardsHenry,
Do you have a structure for your response...if you do then you can do extended reciever det with sync/async..shouldent matter, i just tried it and i dont get any error.
in your reciever determination..Check the box for standard rec det then add your first condition..of the value of a field to true..then send to A..
then you select add condition..and add for second reciever..that should be it, you shouldent need a bpm for such a simple scenario..it definetly is an overkill.
Regards
Ravi Raman -
How to send encrypted data through XI. Pls advice urgent
Hi All,
There is some customer confidental information that I need to
send from source system to XI and then to target system.
So client wants that data to be encrypted.Source and Target system can be File System or can be wsdl files.
Please send me blogs/docs how this scenario can be made.
RegardsHi,
For this if you use SOAP Scenarios means you can have the Security settings in the SOAP Adapter itself
Please search in SDn on SOAP Adapters
Regards
Seshagiri
Maybe you are looking for
-
Time Capsule (SIM) expand network with 802.11b/g Airport Extreme
Hi, I try to expand a Airport-Network which is set up with a Time Capsule (SIM (latest model). I like to use an Airport-Extreme-Basestation to expand the network. The two devices will be connected wireless. In the helpfile there is a explantation how
-
How to add multiple namespaces in XSD ?
Can anyone tell me how to add multiple namespaces inside an XSD. Or how to import XSD into another XSD ?? Thanks
-
Before the upgrade I think I was running V 10.1 (Win 7). At the top left-hand corner had been a big orange FireFox logo-button; when clicked, it dropped down a handy menu: Print, print Preview, History, Downloads, etc. Now suddenly there is a whole n
-
song works fine in itunes but when i transfer it to my phone it playes back brocken and begins to skip. any solutions?? I have already restored my phone to the newest software and also completely uninstalled itunes and re downloaded it.
-
JScrollPane resets position after JTable.changeSelection
I have JTable inside JScrollPane (what a surprise!). Table has some 20 columns, and only 10 are shown at once. If a user scrolls to the right to see the last few columns, and after that I change selection in JTable using jTable.changeSelection(newSel