Fuba or report to update calculate procedure in crm

hello experts,
please I need Your help.
Tell me please the Fuba or the report to update new configurations in the used calculate procedure.
I use the transaction sm53 to delete the cache, but no help.
Two messages give me the system
           the obligatory condition type is missing
           or
           the condition type MWST is not in the calculate procedure
The messages are nuts because the condition type is in the calculate procedure
and the condition type is not obligatory.
thank You for Your answers.
Bye and have a good time
Thorsten

Are you sure that is the FM used ? I have checked and in the export parameter i haven't found ANSAL anywhere, which is strange validating and not passing it.
Try tracing the RFC's called (transaction ST01) and see if there is another FM being called to return ANSAL.
I am more incline towards these :
HRWPC_RFC_EP_READ_SALARY
HRWPC_RFC_EP_READ_SALARY2
As for the question itself, the ANSAL field is only calculated through customizing, and if there isn't any is a regular input field that won't be taken into account during Payment calculation, so i don't think there is any problem in updating it.

Similar Messages

Company code not assigned to country or country to calculate procedure

Hi,
When i am creating RFQ in MM its giving error "Company code not assigned to country or country to calculate procedure".
Please help me out.
Thanks in Advance,
Regards,
Shankar

Hi,
Check this
Please check the settings at spro-FItax on sale and purchasesbasic settings--check calculation procedure-/-Assign country to calculation proceedure.
Assign country to calculation procedure in OBBG.
Check whether tax code is assigned to company code in SproLO general-Tax on goods mov.IndiaBasic settingsCondition Based tax Procedure--Assign tax code to company code.
Try this also
Do the Following Customisation :
Step 1: Check Calculation Procedure
IMG >Financial Accounting>Financial Accounting Global Settings >Tax on Sales/Purchases>Basic Settings >Check Calculation Procedure
Tax procedures are available in SAP for most of the countries. In case a tax procedure is not defined for your country proceed as follows:
In this go to Define Procedures Check for TaxINJ or TaxIN
If it does not exist create a new one by copying it from TaxGB
Step 2: Assign Country to CalculationProcedure
IMG >Financial Accounting>Financial Accounting Global Settings >Tax on Sales / Purchases > Basic Settings >Check Calculation Procedure
In this step we assign the calculation procedure created in the earlier step to the country. The country is the country of the company code.
If you are living in India, then your country of the company code is India.
Step 3. Define TaxCodes for Sales and Purchases
IMG>Financial Accounting>Financial Accounting Global Settings >Tax for Sales and on Sales/Purchases >Calculation>Define Tax Codes
Update the following:-
Define two Zero Tax Codes input and Output Tax codes.
Go to OB40 Transaction code and Assign GL Account.
Do this your problem will be solved.

Lenovo System Update 5.03 on T430u doesn't report software updates

On my T430u Lenovo System Update 5.03 running on windows 8.1doen't find any update even though updates are available. More technical details about the problem are reported in my previous thread.
I'm really pleased if someone can help me.
Thanks,
Denis.
Solved!
Go to Solution.

Hi Mithun,
The problem still persist.
I've just reinstalled all components:
- .NET Framework 3.5 SP1
- Lenovo System Update 5.03.008 (systemupdate503-2013-10-31.exe)
- Related Patch "Patch module for Lenovo System Update" (sushortcutfix01.exe)
- Executing DesktopToastsForCriticalUpdates (look at the screenshot) it reports available updates
- Executing Lenovo System Update it doesn't report any updates to install.
In logs directory of Lenovo System Update installation directory (C:\Program Files (x86)\Lenovo\System Update\logs) I can extract the same error:
Info   2014-01-20 , 12.04.56
   in Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
   Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_08_00.xml
Info   2014-01-20 , 12.04.56
   in Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
   Message: The UDF will be downloaded to-> C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml
Info   2014-01-20 , 12.04.56
   in Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6()
   Message: Setting PROCESSING status.
Severe   2014-01-20 , 12.04.56
   in Tvsu.Engine.Process.HelloProcess.Start()
   Message: Error reading C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml, this XML file is not well-formed
   Exception:
       Message: Elemento radice mancante.
       Type: System.Xml.XmlException
           in System.Xml.XmlTextReaderImpl.Throw(Exception e)
   in System.Xml.XmlTextReaderImpl.ParseDocumentContent()
   in System.Xml.XmlTextReaderImpl.Read()
   in System.Xml.XPath.XPathDocument.LoadFromReader(XmlReader reader, XmlSpace space)
   in System.Xml.XPath.XPathDocument..ctor(TextReader textReader)
   in Tvsu.Engine.Process.HelloProcess.ParseUDF(String udfPath)
   in Tvsu.Engine.Process.HelloProcess.Start()
- The File: C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml
it's an empty file (0 KB).
Can you help me?
Is there a place where I can attach all log files ?
Best regards,
Denis.

Calling a report from a Stored Procedure

Is it possible to call a Oracle Report from a Stored Procedure or a Packaged Stored Procedure. If Yes, please provide some details.
Thanks
Shalu

Shalu,
there's an API available to do this.The feature is called "event driven publishing" (because you can use this even from a trigger) and you can find the documentation here:
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_evnt.htm#sthref1870
Regards
Rainer

Report for update of Material with deletion Flag from R/3 to SRM

Hi All,
           Is any report for Updating material in SRM with deletion indicator for those deletion flag set in R/3...

Check material status
IF mat_mmsta EQ '--'.
    lv_msgv1 = iv_ordered_prod.
    CALL FUNCTION 'BBP_PD_MSG_ADD'
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 426
        i_msgv1       = lv_msgv1
      EXCEPTIONS
        log_not_found = 1
        OTHERS        = 2.
    IF sy-subrc <> 0.
      PERFORM abort.
    ENDIF.
    IF c_on = c_off.
      MESSAGE e426(bbp_pd) WITH lv_msgv1.
    ENDIF.
ENDIF.
if not mat_lvorm is initial.
    lv_msgv1 = iv_ordered_prod.
    call function 'BBP_PD_MSG_ADD'
program name LBBP_PDIGPF2R
Check material in backend
CALL FUNCTION 'META_MATERIAL_READ'
    EXPORTING
      i_mtcom        = ls_mtcom_eci
      logical_system = iv_log_system
    IMPORTING
      e_mmsta        = mat_mmsta
      e_lvorm        = mat_lvorm
    EXCEPTIONS
      mat_not_found = 1
      OTHERS         = 2.
IF sy-subrc <> 0.
    lv_msgv1 = iv_ordered_prod.
    lv_msgv2 = iv_plant.
    CALL FUNCTION 'BBP_PD_MSG_ADD'
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 275
        i_msgv1       = lv_msgv1
        i_msgv2       = lv_msgv2
      EXCEPTIONS
        log_not_found = 1
        OTHERS        = 2.
    IF sy-subrc <> 0.
      PERFORM abort.
    ENDIF.
    IF c_on = c_off.
      MESSAGE e275(bbp_pd) WITH lv_msgv1 lv_msgv2.
    ENDIF.
ENDIF.
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 345
      EXCEPTIONS
        log_not_found = 1
        others        = 2.
    if sy-subrc <> 0.
      perform abort.
    endif.
    if c_on = c_off.
IN SRM PROGRAM LBBP_PDIGPF2R BBP_PD 345 throws message "product x is designed for deletion"
but it is validationg from fm 'META_MATERIAL_READ'
please close this thread
br
muthu

Run report from PL/sql procedure

Please any one tell how to I run a report from pl/sql procedure.

I am not sure, but depending on your environment you can create a script to run your PL/SQL code and then generate the report. As is customary in an UNIX environment utilizing shell scripts.

Parameters on linked report not updating

Hi,
I updated a report adding parameter expressions. A linked report based on the report I updated didn't get the parameter expressions when I deployed the base report. Anybody else having that issue? It's not much of a problem. I just have to recreate the linked report which is a nusance.
Thanks,
DD

I know this question is old, but I had the same problem today, and I think the answer is useful.
When you deploy a new "main" report, the linked reports are NOT updated automatically, so you need to refresh them. You can do this easily from the Report Manager:
1 - Update the main report;
2 - Go to the linked report, use the "Manage" menu, and in the "Properties" tab click in the "Change Link" button:
3 - In the following screen, select the main report, and click "OK". This will refresh the linked report with the modified main report:
4 - Once you're back to the previous screen, click the "Apply" button, to really update the linked report.
5 - VERY IMPORTANT: Since you changed the main report, all the previous adjustments you made in the linked report parameters were lost - like Null, Hide, Prompt User and Display Text, only the Default Value is preserved - so GO TO THE PARAMETERS tab and
adjust the linked report parameters again!!!

MBAM "Enterprise Compliance Report" not updating "Last Contact" date/time for any/all systems.

Running BitLocker/MBAM 1.0.1237.1.
About 1 month ago, "Last Contact" date/time listed in MBAM "Enterprise Compliance Report" stopped updating (last updated 1 month ago) for all systems. However, reporting against these exact same systems individually via
"Computer Compliance Report" shows current/correct "Last Contact" date/time (last updated today).
Have tried http://support.microsoft.com/kb/2620269/en-us but no luck.
Hoping someone has experienced this before, fixed, and can share insights.
Thx,
DCL

You may want to look for communication errors under the MBAM node in Event Viewer.
You may also want to review the registry settings discussed under the
Configure Lab Computers for MBAM Evaluation section of this TechNet article:
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\ClientWakeupFrequency
HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement\StatusReportingFrequency
HKLM\Software\Microsoft\MBAM\NoStartupDelay
Specifically the StatusReportingFrequency
key.
Brandon
MDOP on the Springboard Series on TechNet

Report not updating after Form saved in Workspace in Hyperion Planning

Whenever a form is changed in workspace and saved, it updates the form. I then go to the report to print, the report isn't showing the updated information. I have to go to Essbase to calcall for the report to be updated. How can I get my reports to update as soon as the form is saved. Thx

A few things I would suggest you do to determine where the problem lies.
1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
Good Luck,
-John

Report based on stored procedure

I want to create a report based on stored procedure(not ref cursor!!!!!)
For example - Invoice report with data with complicated rules:
1.line - product_name and price
2.line - annual fee name and price
3.line - some special fee name and price
4..............
5..............
[b][b][b]Is it possible or not?
We can solve the problem using functions, i.e. select line_1_1(param),line_1_data2(param6) from dual union all and select line_2_1(param1,param2),line_2_2(sysdate) from dual and so on, but I am looking for better solution.
We also can use stored procedure to populate data into temporary table, run report and clear the data in the table after that, but database is read-only for users and we don't want to change the security roles.
Thanks in advance.
Iassen Houbenov

See:
"Using a Collection Instead of a Temporary Table in Complex Reports"
http://www.revealnet.com/pipelines/plsql/tips03.htm#NOVEMBER
Regards,
Zlatko Sirotic

Creating Sap Crystal Report Through Oracle Stored Procedure Packages

Hi,
1.How we can create crystal report through oracle stored
procedure packages pls tell me the steps through adding command then
tell me the syntax what should i write in command to call the stored
procedure packages or if have some other option then also tell.
2.can
we link stored procedure column to other table column that used in
report.

Hi Ganesh,
As this error comes when you are trying to insert non-numeric value into a numeric column in db it seems that your field might be numeric and you are trying to send it as a string in database.
Please check your Store Proc carefully..
Reference Thread: Oracle/PLSQL: ORA-01722
--Dhana

MBAM 2.5 Compliance Reports not updating

After much fiddling to install MBAM distributed, I ended up with a remote SQL server and a web server with the SSRS role. The Compliance report has only one entry, my machine, yet there are several more in Recovery database. For version 1.0 and 2.0, you
had a SQL Job called CreateCache that runs a storedProcedure. However, this is removed from version 2.5.
How can I force the Compliace report to update with new data? Where are the logs for MBAM that enables me to see when this operation fails?

There was a problem With the SQL database permission. I thought it worked as intended because of the Helpdesk and SelfService portal worked looking normal and working.
Event ID 28 has not been seen yet, so not sure if this actually is a valid ID.
For Compliance and 256-bit With Diffuser (which is removed from Windows 8) we had to deploy KB2975636 -
https://support.microsoft.com/kb/2975636?wa=wsignin1.0#Prerequisites.
We find the Reporting feature slow even thou we have low amount of Clients.
All in all I still believe that MBAM is not Enterprise ready and I would suggest that other Technologies should be considered first.

Add a Select List to a Report, for Updating a table.

I am working on Apex 3.0. I had to allow the Report could update a table. I added two checkbox to the report, and now I should add a Select List. I've tried a lot of ways but I don't know how can I pass the value selected, related to the ID of the row. I've tried with a JavaScript but I couldn't. A process should update the row on the DB when the user change the value on the select list. There is a save button that perform the process. How I could pass the ID of the row and the value to a PL/SQL process?
Many Thanks for your suggestions.
SELECT PFA.FOCUS_AREA_ID
,FOCUS_AREA_NAME,
apex_item.checkbox(1, FA.FOCUS_AREA_ID, DECODE(PFA.FOCUS_AREA_ID, null, ' ','checked="checked" ') ||
'id="chk'||rownum||'"'|| ' onclick="checking(this)" ') as Focus_AREA_CHK,
APEX_ITEM.SELECT_LIST(
*5,*
PFA.FOCUS_TYPE,
*'DIS;DIS,ENG;ENG,EXP;EXP,TGT;TGT',*
*'id="sl_'||FA.FOCUS_AREA_ID||' " ',*
*'YES',*
NULL,
*'-Select-',*
*DECODE(PFA.FOCUS_AREA_ID, null, 'disabled="disabled" ','' ) || ' --onchange="selectedElement(this)" ',*
*'NO'*
*)* "Type"
FROM PROGRAM_FOCUS_AREAS PFA,
FOCUS_AREAS FA
WHERE
FA.FOCUS_AREA_ID = PFA.FOCUS_AREA_ID(+)
AND :P151_PROGRAM_ID = PFA.VS_PROGRAM_ID(+)

**Deleted**
Edited by: user4498053 on Dec 27, 2011 11:24 AM

Any Report that updates the GR document number of R/3 to SRM

Hi Experts
Can any one tell me is there any reoprt that updated the GR numbers of R/3 to SRM
Because I have done the confirmations in SRM ( 4.0) it created a confirmation number but the shoppingc art history is not updated with the GR document number .
Similiar to like CLEAN_REQREQ_UP is there any report that updates the GR document number in the frontend. And also any table for this like BBP_DOCUMENT_TAB for watching the GR entry till the time it gets cleared.
Please suggest
Regards
Srujan K

Hi Muthu,
Thanks for your reply.
My concern is when I do the confirmations in the SRM the shopping cart history is updated with Confirmations number and i can see the status as approved but I am not able to find the GR number besides the confirmations number in the shopping cart history.
ours is SRM ver 4.0. what could be the problem. when I do the GR from backend and wait for some time the GR document number is getting updated.
But once after i do the confirmation in the frontend it should automatically post a GR is the backend and
update the shopping cart history with GR document number which is not happening
Do I need to check the idoc for this? if so where do i need to check in SRM or in R/3? because this is in quality system as i doing the testing part.
So please provide me some solution for this.
Regards
Srujan K

I lost my adobe flash player on my powerbook g4. what update or procedure do i use to get another flash player.

i lost my adobe flash player on my powerbook g4. what update or procedure do i use to get back video usage.

re-download it. If you don't know how, googe "dowlnoad adobe flashplayer". Also, this is the MacBook Pro forum and you have a Powerbook.

Fuba or report to update calculate procedure in crm

Similar Messages

Maybe you are looking for