Function in select statement need to be called only for the last record.

Select state,
local,
fun_state_loc_other_details(19) details
from state_local
where pm_key=19
resuts:_
State Local Details
AP APlocal details1
UP UPLocal details1
MP MPLocal details1
i) The above query returns 100 records
ii) fun_state_loc_other_details is also getting called 100 times. But I want this function to be called only for the last record that is 100th record.
is there any way to do that?

Thanks amatu.
One more small query. Can I do it on condition based.
Select state,
local,
fun_state_loc_other_details(19) details
from state_local
where pm_key=19
Like if one state it need to be called once.
AP -- 50 records
UP - 20 records
MP -- 10 records.
fyi: this record no. varies
I want the function to be called for AP once, UP once, MP once.

Similar Messages

I need information on my bill, for the last two yrs, how do i go about looking for it

i need information on my bill for the last two yrs, how i go about looking for it . thanks\

The last 12 months' worth can be obtained via your on-line MyVerizon account; look under View Bill and use the drop-down to select the appropriate bill. Anything prior to the past 12 months would need to be obtained via Customer Service; there is a charge (I believe $5 per copy, but I'm not sure).

Select statement is taking lot of time for the first time Execution.?

Hi Experts,
I am facing the following issue. I am using one select statement to retrieve all the contracts from the table CACS_CTRTBU according to FOR ALL ENTRIES restriction.
if p_lt_zcacs[] is not initial.
SELECT
           appl ctrtbu_id version gpart
           busi_begin busi_end tech_begin tech_end
           flg_cancel_obj flg_cancel_vers int_title
         FROM cacs_ctrtbu INTO TABLE lt_cacs FOR ALL ENTRIES IN p_lt_zcacs
                                                WHERE
                                                appl EQ gv_appl
                                                AND ctrtbu_id EQ p_lt_zcacs-ctrtbu_id
                                                AND ( flg_cancel_vers EQ '' OR version EQ '000000' )
                                                AND flg_cancel_obj EQ ''
                                                AND busi_begin LE p_busbegin
                                                AND busi_end GT p_busbegin.
endif.
The WHERE condition is in order with the available Index. The index has APPL,CTRTBU_ID,FLG_CANCEL_VERS and FLG_CANCEL_OBJ.
The technical settings of table CACS_CTRTBU says that the "Buffering is not allowed"
Now the problem is , for the first time execution of this select statement, with 1.5 lakh entries in P_LT_ZCACS table, the select statement takes 3 minutes.
If I execute this select statement again, in another run with Exactly the same parameter values and number of entries in P_LT_ZCACS ( i.e 1.5 lakh entries), it gets executed in 3-4 seconds.
What can be the issue in this case? Why first execution takes longer time?.. Or is there any way to modify the Select statemnt to get better performance.
Thanks in advance
Sreejith A P

Hi,
>
sree jith wrote:
> What can be the issue in this case? Why first execution takes longer time?..
> Sreejith A P
Sounds like caching or buffering in some layer down the i/o stack. Your first execution
seems to do the "physical I/O" where your following executions can use the caches / buffers
that are filled by your first exectution.
>
sree jith wrote:
> Or is there any way to modify the Select statemnt to get better performance.
> Sreejith A P
If modifying your SELECTS statement or your indexes could help depends on your access details:
does your internal table P_LT_ZCACS contain duplicates?
how do your indexes look like?
how does your execution plan look like?
what are your execution figures in ST05 - Statement Summary?
(nr. of executions, records in total, total time, time per execuiton, records per execution, time per record,...)
Kind regards,
Hermann

Sender JDBC adapter -- Update SQL statement NOT work for the last record

I'm trying to use SAP XI to send records from Oracle database to As/400 using JDBC adapter. I've defined the communication channel for sender
(1) The "Query SQL statement" = select a_bgn_dt, a_end_dt from PX_PXXD WHERE NOT CU_ACTION_CD='P'
(2) The "Update SQL statement" = update PX_PXXD set CU_ACTION_CD='P' WHERE NOT CU_ACTION_CD='P'
Supposed that 3 records were retrieved from (1) and successfully updated to AS/400 but only the first 2 records in Oracle database are updated according to (2)
Any advise.
Pansy

Hi Pansy,
You select and update query is looking like wrong
kindly check below query,If you are using oracle
(1) The "Query SQL statement" = select a_bgn_dt, a_end_dt from PX_PXXD WHERE CU_ACTION_CD !='P'
(2) The "Update SQL statement" = update PX_PXXD set CU_ACTION_CD='P' WHERE CU_ACTION_CD !='P'
Thank you
Sateesh

When I have selected multiple paths using the pen tool, I can't make a selection out of them all, but only of the last one I created.

I want to make a selection with both paths in the selection. But it's only allowing me to select one, if I try both the paths just dissapear.

Similarly to what @JJMack said, if you use the direct selection tool (shortcut: A), you can either select all of the paths, or select a blank area of the canvas (which will deselect all paths) and then selecting the 'convert path to selection' button should convert them all simultaneously.
This is one of several bothersome changes to the path selection functionality in CC.

My 4s was stolen and I need to get gps info for the last several days to track the phone. Any ideas?

My iPhone 4s was stolen in the Atlanta airport Saturday. I used "Find My iPhone" to locate it, however I need the gps history to show all of it's travels since stolen. Any ideas on how I can get gps history from the phone?

Thanks, just what I was afraid of. I'm getting nowhere. I know where it ended up, but not how it got there. Police are investigating.

Can I view/print a log of my phone calls for the last year?

How can I view/print a log of my phone calls for the last year without going into each of my individual monthly bills?

tinaro, managing your account online at My Verizon is easy breezy. You can view and print your call details for the last 12 months. However, I apologize that you will be required to access these records from your previous billing statements. For your convenience, you may click here to access your account online: http://bit.ly/xB4iTc
LasinaH_VZW
Follow us on Twitter @VZWSupport

Unable to call local function in select statement.

Hi all,
I am unable to call the local function in select statement in below scenario.
DECLARE
l_cnt NUMBER;
FUNCTION FUN1 RETURN NUMBER
AS
BEGIN RETURN 2;
END;
BEGIN
SELECT FUN1 INTO l_cnt FROM DUAL;
DBMS_OUTPUT.PUT_LINE(l_cnt );
END;
/Any alternate way to call local function in select statement?
Thanks
Ram.

Hi,
Sorry, you can't call a locally defined function in a SQL statement, even if that SQL statement is in a PL/SQL block where the function is in scope.
This applies to packages, also. If a function is not declared in the package spec, but only in the package body, then you can't call it from SQL statements in the package body.
Why do you want a locally defined function? Why not a function defined outside the procedure?

Using java function in select statement

Hi,
I am trying to use java function in select statement.
public class ClassA{
     private static String MyConst = "foo";
     public static String functionA(){
          return MyConst;
in my query I have:
select
     ClassA.functionA() AS id,
     groupId AS newID,
from
     myChannel[now]
ClassA is part of the application (no need to import).
I get and error of Invalid Expression on ClassA.functionA().
I also tried to declare the function in the processor element:
<wlevs:processor id="proc">
     <wlevs:function function-name="A" exec-methode="functionA">
          <bean class="mtPackage.ClassA"/>
     </wlevs:function>
<wlevs:processor>
but then I get a different error in the processor XML file: "An InvocationTargetException was encoutered while attemting to register the user defind function A. The message was null"
What am I missing here?

Hi,
From the above description, you have tried two manners to call method functionA() in the user defined class ClassA. One uses java cartridge manner directly and the other try to use user defined function manner.
For the java cartridge manner, the following CQL query should work if the ClassA is really included in the OEP app. I have done similar test before, it works.
select
     ClassA.functionA() AS id,
     groupId AS newID,
from
     myChannel[now]
For user defined function manner, I think two things you need to change:
1. Need to declare the function in the EPN assembly file(under META-INF/spring/), not component configuration file(under META-INF/wlevs/). The following is an example:
<wlevs:processor id="proc">
     <wlevs:function function-name="A" exec-methode="functionA">
          <bean class="mtPackage.ClassA"/>
     </wlevs:function>
</wlevs:processor>
2. Call the user defined function in the CQL query in the component configuration file under processor. For example:
select A() from myChannel
Regards,
XiYing

PL/SQL Function in Select statement

Hi
I am calling a function in select statement. The query works in Toad and PL/SQL developer except SQL plus and disconnecting Oracle connection.
The error is “ERROR at line 1: ORA-03113: end-of-file on communication channel”.
When I called the same query from BC4J View Object the error message is “java.sql.SQLException: No more data to read from socket”.
Can any one advise me please?
Thanks
Srini

Srini
I've seen similar cases in the past with 9.2.0.x (x <= 5). What Oracle version are you using? It's worth checking the bug database (I can't just now - I don't have a valid support id in my current contract). And as Warren says, post your SQL query.
HTH
Regards nigel

Count(*) function in select statement having group by condition

Hi
I would like to use count(*) in select statement having group by clause. say for example there is a state with a number of cities listed. I would like to get the count of cities for each state.
the sql stement is grouped by state and it is joined with 5 more tables.
Thanks
ps: ignore the previous post

Assuming there is one record per city per state, then
SELECT state,count(*)
FROM state_tbl
GROUP BY stateWill get one record per state with the number of cities in each state. If you want to join that result set to other tables you need to either create a view with that statement or use an in-line view viz.
SELECT c.cust_name,c.state,s.num_cities
FROM customers c,
     (SELECT state,count(*) num_cities
      FROM state_tbl
      GROUP BY state) s
WHERE c.state = s.stateTTFN
John

How to pass rowtype argument to a function from select statement?

Hi all!
I have function that takes mytable%rowtype as in parameter. can I pass entire row of mytable to the function from select statement? kind of
select myfunction(mytable.*) from mytable where ....
Thanks in advance

The function can be used in a SQL statement only if it accepts SQL types and returns SQL type. %ROWTYPE being PL/SQL construct and not a SQL datatype, can not be used in this context.
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10743/datatype.htm#i2093

HT1725 RE:case#426486986 no one called me, only e-mail, I just need refund, I have been trying to reach iTunes for the last 2 month! unable to get help! 818-800-7400

RE:case#426486986 no one called me, only e-mail, I just need refund, I have been trying to reach iTunes for the last 2 month! unable to get help! 818-800-7400

yes

Field to make uneditable only for the current/selected row

I have a web dynpro application and I wanted to make some fields uneditable and for this I have done the following:
I bound a context attribute to the readOnly property of all the fields you want to control. Then in the onEnter event of the main field, I set the value of this bound context attribute to ABAP_TRUE to change the state of the corresponding UI elements.
I have written the following in the onenter event of the main field:
DATA lo_el_context TYPE REF TO if_wd_context_element.
   DATA ls_context TYPE wd_this->element_context.
   DATA lv_editable TYPE wd_this->element_context-editable.
* get element via lead selection
   lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
   IF lo_el_context IS INITIAL.
   ENDIF.
* @TODO fill attribute
* lv_editable = 1.
* set single attribute
   lo_el_context->set_attribute(
     name = `EDITABLE`
     value = 'ABAP_TRUE' ).
Now the issue is that when I hit enter on the main field all other fields gray out/uneditable for all the rows, what I want is the other fields should be greyed out only for the row where I am entering the main field and hit enter.
Can you please tell me how can I do that?
Thanks,
Rajat

Hi Raj,
You are not getting it. When you have only one context attribute and bind that to all the rows/columns of the table then everything will be enabled or disabled.
In your case, create a local node with cardinality 1:1 inside the node you already have.
Write a supply a function for this node.
Add a attribute read_only of type wdy_boolean.
bind this attribute to the read_only property of the table columns.
in the supply function based on the element conditions you might have enable this attribute of disable.
supply function method already has the necessary code , you only need to enable the commented lines and put your if ..end if code around it.
See a example.
* General Notes
* =============
* A common scenario for a supply method is to aquire key
* informations from the parameter <parent_element> and then
* to invoke a data provider.
* A free navigation thru the context, especially to nodes on
* the same or deeper hierachical level is strongly discouraged,
* because such a strategy may easily lead to unresolvable
* situations!!
* if necessary, get static attributes of parent element
DATA ls_parent_attributes TYPE wd_this->element_sflight.
parent_element->get_static_attributes(
    IMPORTING
      static_attributes = ls_parent_attributes ).
** data declaration
DATA ls_prop TYPE wd_this->element_prop.
** @TODO compute values
** e.g. call a data providing FuBa
IF ls_parent_attributes-carrid <> 'LH' .
    ls_prop-read_only = abap_true.
ELSE.
    ls_prop-read_only = abap_false.
ENDIF.
** bind a single element
node->bind_structure(
    new_item             = ls_prop
    set_initial_elements = abap_true ).

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

Function in select statement need to be called only for the last record.

Similar Messages

Maybe you are looking for