Application server to application server

Hello All,
I have a senario to pick the file from ECC 6.0 and send to ECC 5.0. There is no share folder between XI and ECC 6.0/ECC 5.0.
Sender File:
1,fileheader
2,recordheader
3,detailrecord,....
3,detailrecord,...
2,rcordheader
3,detailrecord,....
2,recordheader
3,detailrecord,....
3,detailrecord,...
4,trailerrecord
Receiver file:
1,Fileheader
2,detailrecord,.. (should contain detail record with corresponding record header in all detail record)
2,detailrecord,..
2,detailrecord,..
2,detailrecord,..
2,detailrecord,..
3,trailerrecord
Since there is no share folder(cant create), i think I should go for FTP File content conversion.
Can someone provide me a link to the blog which will help to configure this senario successfully?
Thanks,
Amal
Edited by: Amal on Sep 8, 2009 6:44 AM
Edited by: Amal on Sep 8, 2009 6:45 AM

Hi,
Please see the below link . It refers to the same issue.
Is it possible PI pick the file from ECC application server without FTP
For FCC you can check the SAP help Docs.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Regards,
Shweta.

Similar Messages

I want to remove the COnlineBank, OnlineBank and csample applications from my application and web server.

How can I safely do this on Solaris? I've tried "iasdeploy removeapp" and "iasdeploy removemodule" with no luck. I want to clear all of this demo stuff out to make both the web and app server look more production like.
Thanks
Eric

Eric,
these applications are applogics which are not controlled by the
iasdeploy tool. Unfortunately, there is no tool available to remove
these applications for you. What you can do is to manually remove all
their entries, but be careful if you do that. If you remove the wrong
keys you might break your ias installation, so be warned and make sure
you backup the whole ias registry before attempting to remove anything.
Eric Coleman wrote:
>
I want to remove the COnlineBank, OnlineBank and csample applications
from my application and web server.
How can I safely do this on Solaris? I've tried "iasdeploy removeapp"
and "iasdeploy removemodule" with no luck. I want to clear all of
this demo stuff out to make both the web and app server look more
production like.
Thanks
Eric
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
o .
o .
O _ ____ _ _
(_) _ \| | __ _ _ __ ___| |_ TM
| | |_) | |/ _` | '_ \ / _ \ __|
| | __/| | (_| | | | | __/ |_
|_|_| |_|\__,_|_| |_|\___|\__|
e-commerce solutions
Sun Microsystems Australia Pty Ltd

OID Realm Setup for Partner Application in another application server

This message was also posted under the Identity Management thread.
We currently have 10.1.2 SSO running and configured to accept a partner application from another app server (10.1.3). A sample application attempts to authenticate a user and then use JAZN to confirm whether the user is in the correct OID group. The user can authenticate successfully, which shows up in the SSO audit table, but the group check fails. I believe this is due to the realm not being visible to the other app server? How do I go about setting up the app server or application on the 10.1.3 platform to be able to check the 10.1.2 SSO server for the right OID group when the user authenticates? I have tried to set up the file-based permissions through the EM console, but seems to be only valid for the local setup. My thought was that the system-jazn-data.xml file would need to identify and point to the SSO server? When I troubleshoot that file, I see the correct realm entry and also the correct JAZN group and the OID GUID for the group. Any suggestions?
Thanks,
Leif

Hi Amit,
I am also facing the same issue. Could you please share the work around you around to get rid of this issue?
Mahendra.

The tool was unable to install Application Server Role, Web Server (IIS) Role.

Hi,
After running the prerequisiteinstaller.exe of SharePoint 2013 I am getting the below error in the logs
The tool was unable to install Application Server Role, Web Server (IIS) Role.
Web server role,application server role is already there in the server.
Ran the necessary power shell commands but still not able to proceed with this error.
Please share your inputs to cross over this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

HI Sudheer,Please check the link below that explains the solution for the same issues.
http://expertsharepoint.blogspot.de/2014/01/the-tool-was-unable-to-install.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

SharePoint 2013 preinstaller error - The tool was unable to install Application Server Role, Web Server (IIS) Role.

I have been banging my head over and over searching for the fix and nothing has worked. Google used to be my friend. I am having doubts.
Windows 2012 Server with IIS installed during the server creation using VMware Vshpere. Here is the log from the SP prep tool.
2014-06-23 10:13:12 - Processor architecture is (9)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Common Startup
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-23 10:13:12 - Trying to remove the startup task if there is any.
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-23 10:13:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-23 10:13:12 - Locating the following command line arguments file:
2014-06-23 10:13:12 - C:\sp2013\PrerequisiteInstaller.Arguments.txt
2014-06-23 10:13:12 - Error: This file does not exist
2014-06-23 10:13:12 - Details of the current operating system:
2014-06-23 10:13:12 - Major version number of the operating system: (6)
2014-06-23 10:13:12 - Minor version number of the operating system: (2)
2014-06-23 10:13:12 - Build number of the operating system: (0X23F0=9200)
2014-06-23 10:13:12 - Major version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Minor version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Platform ID of the operating system: (2)
2014-06-23 10:13:12 - Product suites available on the operating system: (0X110=272)
2014-06-23 10:13:12 - Product type of the operating system: VER_NT_SERVER
2014-06-23 10:13:12 - Product type: (7)
2014-06-23 10:13:12 - OS type: (0)
2014-06-23 10:13:12 - Configuring the application's property sheet...
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Management Framework 3.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - PowerShellVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft .NET Framework 4.5
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - Install
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.5.51641
2014-06-23 10:13:12 - A post release .NET 4.5 is installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 6.1.7600.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:12 - Reading version of the following file...
2014-06-23 10:13:12 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:12 - The version is...
2014-06-23 10:13:12 - 1.0.3010.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 10.51.2500.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Server AppFabric
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCC
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheClient is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCS
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheService is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCA
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheAdmin is Installed.
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 2.0.1230.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Information Protection and Control Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.0.959.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 5.0.51212.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - IsInstalled
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:19 - Beginning download/installation
2014-06-23 10:13:19 - Created thread for installer
2014-06-23 10:13:20 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\PreA98B.tmp.XML"
2014-06-23 10:13:20 - Error: Unable to install (2)
2014-06-23 10:13:20 - Error: [In HRESULT format] (-2147024894)
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Flags
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PendingFileRenameOperations
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-23 10:13:20 - Reading the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-23 10:13:20 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-23 10:13:20 - Cannot retry
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Management Framework 3.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PowerShellVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft .NET Framework 4.5
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Install
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.5.51641
2014-06-23 10:13:20 - A post release .NET 4.5 is installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 6.1.7600.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:20 - Reading version of the following file...
2014-06-23 10:13:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:20 - The version is...
2014-06-23 10:13:20 - 1.0.3010.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 10.51.2500.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Server AppFabric
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCC
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheClient is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCS
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheService is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCA
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheAdmin is Installed.
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 2.0.1230.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Information Protection and Control Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.0.959.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 5.0.51212.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - IsInstalled
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:16:23 - Opening log file
2014-06-23 10:16:23 - Opened action for user
2014-06-23 10:16:23 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.23-10.13.12.log

It looks like you may have extracted the files to C:\sp2013. Can you try installing from a mounted ISO instead? Can you also validate that this is Server 2012 and not 2012 R2?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Prerequisiteinstaller.exe error - unable to install Application Server Role, Web Server (IIS) Role

Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
Alan

ServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil Loka

Please try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Regaring file from FTP server to application server

Hi frnds,
Below is my code where i am transferring Presentation server file to FTP server.
Now i want to transfer that file from FTP server to application server.
any help. below i am providing my code.
<code>
*& Report demo
report z_demo_ftp.
Variables declaration
data : mi_handle type i,
       pwd       type char30,
       slen      type i,
       key type i value 26101957,
       it_file2 type filetable,
       w_file2 like   line of it_file2,
       l_rc type i,
       v_index type i,
       v_file(30) type c,
       v_path(100) type c,
       v_path_tmp(100) type c.
*Internal table declaration
data: begin of mtab_data occurs 0,
       line(132) type c,
      end of mtab_data.
Selection scree parameters
parameters: p_file type string default 'C:\'.
Get the file path
at selection-screen on value-request for p_file.
data: p_file1 type string.
p_file1 = p_file.
call method cl_gui_frontend_services=>file_open_dialog
    exporting
      default_filename        = p_file1
    changing
      file_table              = it_file2
      rc                      = l_rc
    exceptions
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    read table it_file2 into w_file2 index 1.
    p_file = w_file2-filename.
    clear w_file2.
    refresh it_file2.
    split p_file at '\' into table it_file2.
    describe table it_file2 lines v_index.
    read table it_file2 into w_file2 index v_index.
    concatenate 'put' w_file2-filename into v_file separated by space.
    delete it_file2 index v_index.
    clear w_file2.
    loop at it_file2 into w_file2.
    if sy-tabix = 1.
    v_path = w_file2-filename.
    endif.
    if sy-tabix ge 2.
    concatenate v_path '\' w_file2 into v_path.
    endif.
    endloop.
    concatenate 'lcd' v_path into v_path_tmp separated by space.
endif.
Start of selection
start-of-selection.
pwd = 'file456'.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
exporting
    source      = pwd
    sourcelen   = slen
    key         = key
importing
    destination = pwd.
Connect to FTP
call function 'FTP_CONNECT'
exporting
    user            = 'client'
    password        = pwd
    host            = 'saturn'
    rfc_destination = 'SAPFTP'
importing
    handle          = mi_handle
exceptions
    not_connected   = 1
    others          = 2.
if sy-subrc = 0.
Excute FTP command
call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = 'cd staff
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
Excute FTP command
      call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = v_path_tmp
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
Excute FTP command
call function 'FTP_COMMAND'
    exporting
      handle        = mi_handle
      command       = v_file
    tables
      data          = mtab_data
    exceptions
      tcpip_error   = 1
      command_error = 2
      data_error    = 3
      others        = 4.
if sy-subrc = 0.
    loop at mtab_data.
      write: / mtab_data.
    endloop.
endif.
endif.
*FTP disconnect
call function 'FTP_DISCONNECT'
exporting
    handle = mi_handle
exceptions
    others = 1.call function 'FTP_DISCONNECT'
exporting
    handle = mi_handle
exceptions
    others = 1.
      end-of-selection.
</code>
so what more code shuld i write.
regards,
kamal

Hi Che Eky ,
                      Actually the above code is for putting the presentation server file to FTP Server.
But now i need to Put the same file present in the FTP server to Application server.
So any help or code which will be helpful.
regards,
kamal

Copy File from Presentation Server to Application Server in Background

Hi,
I need to copy Image file from Presentation Server to Application Server.
The below given code is workking fine in Foreground but whenevr I am trying to execute in Background, the job is cancelled and I am getting a dump.
data : wa_source      type string,
          wa_destination type string.
wa_source = 'C:\PARBIND.BMP'.
wa_destination = 'D:\PARBIND.BMP'.
start-of-selection.
call method cl_gui_frontend_services=>file_copy
    exporting
      source               = wa_source
      destination          = wa_destination
*    overwrite            = SPACE
* EXCEPTIONS
*    cntl_error           = 1
*    error_no_gui         = 2
*    wrong_parameter      = 3
*    disk_full            = 4
*    access_denied        = 5
*    file_not_found       = 6
*    destination_exists   = 7
*    unknown_error        = 8
*    path_not_found       = 9
*    disk_write_protect   = 10
*    drive_not_ready      = 11
*    not_supported_by_gui = 12
*    others               = 13
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
In backgound Error is....
Exception condition "CNTL_ERROR" raised.*
Any solution is appreciated.
Thanks
Arbind

Hi Arbind,
Just realize... when you run it in foreground, you have a foreground to capture the file location. so it runs fine..
but when you are running it in background, there is no foreground to check that is no gui present... how can it check where the C:\.... location is??
no need of reading any oss note... just see.. the name is cl_GUI_FRONTEND_service.. its only for front end..
u need open dataset, read dataset, close dataset kind of things while running in background. or RFCs to read the file... (search SDN).

How to transfer file from application server to presentation server in background?

Hi Experts,
How to transfer file from application server to presentation server in background?
Thanks in advance
Namita

Thanks Raman and Challa,
We want to move file from application server to Shared folder, not on local machine. We checked FM which you guys have provided but those are not able to read file from application server.
We need this program to run in background so that we can use this in daily process chain.
Appreciate your inputs on this.
Thanks,
Namita

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

Download 350MB of data from Application Server to Presentation server

i want to Download 350MB(Around 2.5Million record of Table BSEG) of data from Application Server to Presentation server..
i have tried with the transaction CG3Y and program using open dataset,read dataset,close dataset,ws_download...but went in vain,,,ended with TIMEOUT ERROR..will OPEN DATASET 'path' FOR OUTPUT FILTER 'Compress' be helpful
..please help me ..its urgent..

you can do the FTP with Unix commands..
initially connect to the application server by using command
FTP <app server ip>,then it willl ask for username and password... after successful connection you can use the following commnads to transfer file
lcd <destination path name>(set the dest path)
cd <source path>(set the sorce path),
get <filename to be transfererd>( do the transfer)....
You can do same with ABAP code also, for this you need to use some function modules like..
FTP_CONNECT ( to establish the connection)
FTP_COMMAND ( to execute the commands like cd, lcd get,put)
finally FTP_DISCONNECT to close the open connection...
for further details refer standard program RSFTP002,RSFTP003....
reward points if helpful...

Files from FTP server to Application server

Hi All,
I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface. Actually the process is already established at clientsite for placing master data files like product, plant etc from FTP server to App server through FTP adapter. Now my requirement is to move transaction data file with completely different structure as master data to App server. If we place these trasaction data file in same folder/directory as master data files does SAP XI pick this file also. If not what are the steps I need to follow to achieve this. I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
Right now our process for master data files is SAP XI picks the files and deletes the file from FTP server folder. The master data file names are plant_attr.csv, product_attr.csv etc and transcation data file name is salestrasactiondata.csv. I need to move these files to application server on daily bases.
I appreciate your help .
Regards
Bob.

> I am new to SDN and SAP XI, can anyone tell me whether its possible to move the files (different strcuture files i.e. some are master data files and some are transaction data file) from FTP server to Application server with one interface.
Hello Bob,
Yes it is possible.
There can be two ways of doing it.
1. N:1 mapping, BPM will require for this.
N:1 Mapping refer this blog
IDOCs (Multiple Types) Collection in BPM
BpmPatterns CollectMerge
part1 BPM with Patterns explained Part-1
part2 BPM with Patterns explained Part-2
Second option
Create 3 scanarios in integration directory and correspondingly in integration repositoy create different data types, message types, mappings & interface mappings and then in each of scenario us different message interface and interface mapping.
> I know that if we create new configuration it will work but I question is does master data interface picks this transaction data file also.
>
If you are using N:1 scenario then use *.csv in your sender adapter under file name parameter and then all the files will be picked up from same directory.
If you are using second option (3 different scenarios) then also you can pick the different files from same directory. You will be having 3 sender adapters in this case, So, one for picking master data, and another for product data and the last one for transaction data.
So, in case of master data use "plant_*.csv" as a file name and directory name.
In case of product data, use "product_*.csv " as a file name and source directory will remain same.
similarly do it for transaction data.
So by this way all 3 sender adapters will perform their job to pick the different files from same source directory.
Regards,
Sarvesh

How to download a file from application server to presentation server

Hi experts,
I want to download a file from application server to presentaion server, file contaims three fields customer name, customer email id and status..
help me out i m new into sap.

Dear Aditya,
Please check below thread
http://scn.sap.com/thread/1010164
it will help you.
BR
Atul

Oracle Application Server 10g (Application Running)

Dear All Sir/Madam
It is my humble request that please tell me how to run Application on Application Server 10g.
I developed my Application in Oracle developer suit 10g (build internet appliacation), and I am using *10g database*.
Now please tell me the complete procedure who to configure oracle application server 10g on linux.

Hello Ghulam,
Notice that you can deploy different kind of applications within the Application Server framework, e.g. JEE applications, PL/SQL applications, Forms Applications etc. Based on what you initially mentioned, it seems that your have developed a Forms application. The above document reference refers to Application Server 10.1.3, which was a JEE / SOA release. You are probably better off with the [url http://download.oracle.com/docs/cd/B14099_18/web.1012/b14032/toc.htm]Forms Deployment Guide.
One note : Application Server 10.1.2.x is soon to be desupported. Consider to move to version [url http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html]11.1.2 !
Thanks,
EJ

How can i deploy two different versions of the same application on the same server??

I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

Hi
You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
Cheers
-pradeep

Application server to application server

Similar Messages

Maybe you are looking for