Function module CS_BOM_EXPL_MAT_V2 Documentation
I cannot find any documentation for function module CS_BOM_EXPL_MAT_V2. It is a very powerful function module, however, it is not useful without documentation. I know that it can do single level boms as well as multi level and a host of other things, but I can only guess without documentation. Do you know where I can get documentation for this function module.
thank you in advance, Leonard Getz, Dy4 Systems Inc. Ottawa, Ontario, Canada.
This is what I found:
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2' "BOM explosion for material
EXPORTING
ftrel = SPACE " csdata-xfeld Limited multi-level - stop explosion at items not relevant to production
aufsw = SPACE " csdata-xfeld Determine and enter order level and channel
aumgb = SPACE " csdata-xfeld Calculate scrap quantity
aumng = 0 " stko-bmeng Scrap quantity
auskz = SPACE " csdata-xfeld Scrap
bagrp = SPACE " mara-matnr Assembly restriction
beikz = SPACE " stpo-beikz Material provision indicator
bessl = SPACE " csdata-xfeld Material provision selection indicator
bgixo = SPACE " csdata-xfeld Load assembly information for exploded assemblies only
brems = SPACE " csdata-xfeld Limited explosion
capid = 'STD1' " tc04-capid Application ID
cospr = SPACE " csdata-xfeld Internal: (CO) order-spec. MatPreRead
cuobj = 000000000000000 " marc-cuobj Configuration
datuv = 00000000 " stko-datuv Validity date
delnl = SPACE " csdata-xfeld Delete items not kept in stock from list
emeng = 0 " stko-bmeng Required quantity
erskz = SPACE " stpo-erskz Spare part indicator
erssl = SPACE " csdata-xfeld Spare part selection indicator
fbstp = SPACE " csdata-xfeld Limited multi-level - stop explosion at externally procured item
mbwls = SPACE " csdata-xfeld Read material valuation
mdmps = SPACE " csdata-xfeld Limited multi-level - explode phantom assemblies at least
mehrs = SPACE " csdata-xfeld Multi-level explosion
mkmat = SPACE " csdata-xfeld Limited multi-level; explode KMAT
mmaps = SPACE " csdata-xfeld Limited multi-level - explode at least M assembly (M order)
mmory = SPACE " csdata-xfeld Memory use ('1'=on;'0'=off;' '=no reaction)
mtnrv = SPACE " mara-matnr Material
postp = SPACE " stpo-postp Item category
rndkz = SPACE " csdata-xfeld Round off: ' '=always, '1'=never, '2'=only levels > 1
rvrel = SPACE " stpo-rvrel Relevant to sales
sanfr = SPACE " stpo-sanfe Production
sanin = SPACE " stpo-sanin Maintenance
sanka = SPACE " stpo-sanka Costing
sanko = SPACE " stpo-sanko Engineering/design
sanvs = SPACE " stpo-sanvs Shipping
schgt = SPACE " stpo-schgt Bulk material
stkkz = SPACE " stpo-stkkz PM assembly
stlal = SPACE " stko-stlal Alternative BOM
stlan = SPACE " stzu-stlan BOM usage
werks = SPACE " marc-werks Plant
mdnot = SPACE " csdata-xfeld Restriction on MDMPS: do not explode M phantom
panot = SPACE " csdata-xfeld Restriction on MDMPS: no parallel discontinue
IMPORTING
topmat = " cstmat Data for start material
dstst = " csdata-xfeld Structure destroyed by filter
TABLES
stb = " stpox Collective item data table
matcat = " cscmat Material catalog (sub-assemblies)
EXCEPTIONS
ALT_NOT_FOUND = 1 " Alternative not found
CALL_INVALID = 2 " Incorrect parameter combination
MATERIAL_NOT_FOUND = 3 " Material not found
MISSING_AUTHORIZATION = 4 " No authorization (bill of material)
NO_BOM_FOUND = 5 " No BOM for this material
NO_PLANT_DATA = 6 " Material not maintained in plant
NO_SUITABLE_BOM_FOUND = 7 " BOM does not exist
. " CS_BOM_EXPL_MAT_V2
Similar Messages
-
Hi
Im going to use FM: CS_BOM_EXPL_MAT_V2 and I want to only pass WERKS, but when I execute FM is gives exception as CALL_INVALID.
I saw all the Import parameters are Optional, but I think I need to pass more inputs to FM.
Please let me know what are MINIMUM input parameters required to run this FM
ThanksHi
In my requirement, there are range of WERKS and MATNR which has to be given from selection screen, where as In CS_BOM_EXPL_MAT_V2 function module I can only give single value for WERKS and MATNR.
Can any one guide me how can I implement this? -
Virtual InfoCube with Services - function module parameters documentation ?
Hello,
I have been trying to use a Virtual Infocube with Services.
I have seen most of the posts in SDN, and read the documentation in http://help.sap.com/saphelp_nw04/helpdata/en/8d/2b4e3cb7f4d83ee10000000a114084/frameset.htm
I did not manage to find a precise description of the import
parameters of the Variant 2.
In particular, what is the meaning of the
i_tx_rangetab TYPE rsdri_tx_rangetab parameter. I read in the code of RS_BCT_FIGL_DATA_GET that it has to do with query columns. In the tests I did this table is alway empty.
Also, i_th_sfc gives you the list of characteristics used in the query. But it does not inform you on wether these are in the 'rows' 'free characteristics' or 'filter'. Is there a way of knowing that?
Claudio CiardelliHi Claudio,
I never implemented Virtual InfoCube with services with a FM, but I know there is a couple of How To Documents about named:
- How to Reporting from External Data via Virtual InfoProvider
-How to Implement a Virtual InfoCube with Services
both with some code samples: did you read it?
Hope it helps
GFV -
Documentation of Function Modules and Class Methods
Hi
I would like to know the function modules that handle the documentation of function modules and class methods.Is it possible to assign the same documentation of a function module to a method as method documentation?
Are these documentations stored in some system tables?
Thanks in advance,
HemaThe documentation text is stored as Standard text.
you can see these details in the function module->
goto->documentation->
you will now see a screen, there GOTO->HEADER.
YOU will see a screen with the below details.
Text Name Z0MM_SCM_FNC_EVCOR_DELIVERY
Language EN
Text ID FU Function module
Text object DOKU Online Documentation
in this case TEXT NAME = FUNCTION MODULE NAME.
These details are stored in STXH &STXL . But you can use select from these tables. you have to use READ_TEXT to read the documentation to the program.
regards
srikanth -
Bom explosion function module for bypassing phantom materials
hi,
function module "cS_BOM_EXPL_MAT_V2" is used to explode the componensts of first level only.
In my case there are components at first level are phantom assemblies so i want to drill down further to arrive at E or F part which may be at 2nd or 3rd level.
please suggest any BAPI or function module for the above requirement.
Thanks.
KumarDear Kumar,
check with following input values for the Functional Module
FTREL
ALEKZ
ALTVO
AUFSW
AUMGB
AUMNG 0.000
AUSKZ
AMIND
BAGRP
BEIKZ
BESSL
BGIXO
BREMS
CAPID PP01
CHLST
COSPR
CUOBJ 000000000000000000
CUOVS
CUOLS
DATUV 13.05.2008
DELNL
DRLDT
EHNDL
EMENG 2.000
ERSKZ
ERSSL
FBSTP
KNFBA
KSBVO
MBWLS X
MKTLS X
MDMPS
MEHRS X
MKMAT
MMAPS
SALWW
SPLWW
MMORY 1
MTNRV S7690339
NLINK
POSTP
RNDKZ
RVREL
SANFR
SANIN
SANKA
SANKO
SANVS
SCHGT
STKKZ
STLAL 1
STLAN 1
STPST 0
SVWVO X
WERKS 5501
NORVL
MDNOT
PANOT
QVERW
VERID
VRSVO X
I'm using this FM with the above input parameters and I'm getting the necessary details perfectly.
Please check & revert back.
Regards
Mangalraj.S -
LINKING BETWEEN FUNCTION MODULE AND INTERACTIVE NO. OF BASIC LIST
Dear Mates,
Iam preparing Z report for BOM display of FG and SFG materials.
Iam displaying the Basic List using the MAST table. Here i double click on the material no.
Here iam using the function module :CS_BOM_EXPL_MAT_V2 for fetching the data from STPOX structure ,here i want to link material no. which has been from basic list and the above said function module.
Can anybody provide the solution for the above said linking in ALV interactive report.
Please treat it very urgent as this report is to be presented on high priority.
Thanks in advance
SubbuHi
use the Function module REUSE_ALV_POPUP_TO_SELECT.
check the below example:
REPORT ZSR_ALV_INTERACTIVE.
TABLES : LFA1,EKKO,EKPO.
SELECT-OPTIONS : VENDOR FOR LFA1-LIFNR.
DATA : BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF ITAB.
DATA : BEGIN OF JTAB OCCURS 0,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
END OF JTAB.
DATA : BEGIN OF KTAB OCCURS 0,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF KTAB.
TYPE-POOLS : SLIS.
DATA : REPID LIKE SY-REPID.
DATA :LFA1_B TYPE SLIS_T_FIELDCAT_ALV,
LFA1_W TYPE SLIS_FIELDCAT_ALV,
EKKO_B TYPE SLIS_T_FIELDCAT_ALV,
EKKO_W TYPE SLIS_FIELDCAT_ALV,
EKPO_B TYPE SLIS_T_FIELDCAT_ALV,
EKPO_W TYPE SLIS_FIELDCAT_ALV,
EVENTS_B TYPE SLIS_T_EVENT,
EVENTS_W TYPE SLIS_ALV_EVENT.
PERFORM GET_VAL.
REPID = SY-REPID.
SELECT LIFNR NAME1 FROM LFA1 INTO TABLE ITAB WHERE LIFNR IN VENDOR.
*perform val USING USER_COMMAND sel.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
IT_FIELDCAT = LFA1_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = ITAB.
*& Form GET_VAL
text this is to put column headings
FORM GET_VAL.
LFA1_W-FIELDNAME = 'LIFNR'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'LIFNR'.
APPEND LFA1_W TO LFA1_B.
LFA1_W-FIELDNAME = 'NAME1'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'NAME1'.
APPEND LFA1_W TO LFA1_B.
EKKO_W-FIELDNAME = 'EBELN'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'EBELN'.
APPEND EKKO_W TO EKKO_B.
EKKO_W-FIELDNAME = 'AEDAT'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'AEDAT'.
APPEND EKKO_W TO EKKO_B.
EKPO_W-FIELDNAME = 'EBELP'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'EBELP'.
APPEND EKPO_W TO EKPO_B.
EKPO_W-FIELDNAME = 'MATNR'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'MATNR'.
APPEND EKPO_W TO EKPO_B.
EVENTS_W-NAME = 'USER_COMMAND'.
EVENTS_W-FORM = 'VAL'.
APPEND EVENTS_W TO EVENTS_B.
ENDFORM. "GET_VAL
*& Form VAL
text
-->USER_COMMANtext
-->SEL text for retrieving data
FORM VAL USING USER_COMMAND LIKE SY-UCOMM SEL TYPE SLIS_SELFIELD.
DATA : VEN(10) TYPE N,
PO(10) TYPE N.
DATA : MAT(10) TYPE C.
IF SEL-FIELDNAME = 'LIFNR'.
VEN = SEL-VALUE.
SELECT EBELN AEDAT FROM EKKO INTO TABLE JTAB WHERE LIFNR = VEN.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
I_STRUCTURE_NAME = EKKO_B
IT_FIELDCAT = EKKO_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = JTAB.
ENDIF.
IF SEL-FIELDNAME = 'EBELN'.
PO = SEL-VALUE.
SELECT EBELP MATNR FROM EKPO INTO TABLE KTAB WHERE EBELN = PO.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
I_TITLE = 'ITEM DETAILS'
I_TABNAME = 'EKPO'
IT_FIELDCAT = EKPO_B
I_CALLBACK_PROGRAM = REPID
IMPORTING
ES_SELFIELD = SEL
TABLES
T_OUTTAB = KTAB.
ENDIF.
logic to select a record
IF SEL-FIELDNAME = 'MATNR'.
MAT = SEL-VALUE.
SET PARAMETER ID 'MAT' FIELD MAT.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. "VAL
check my example:
REPORT ZSR_ALV_INTERACTIVE.
TABLES : LFA1,EKKO,EKPO.
SELECT-OPTIONS : VENDOR FOR LFA1-LIFNR.
DATA : BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF ITAB.
DATA : BEGIN OF JTAB OCCURS 0,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
END OF JTAB.
DATA : BEGIN OF KTAB OCCURS 0,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF KTAB.
TYPE-POOLS : SLIS.
DATA : REPID LIKE SY-REPID.
DATA :LFA1_B TYPE SLIS_T_FIELDCAT_ALV,
LFA1_W TYPE SLIS_FIELDCAT_ALV,
EKKO_B TYPE SLIS_T_FIELDCAT_ALV,
EKKO_W TYPE SLIS_FIELDCAT_ALV,
EKPO_B TYPE SLIS_T_FIELDCAT_ALV,
EKPO_W TYPE SLIS_FIELDCAT_ALV,
EVENTS_B TYPE SLIS_T_EVENT,
EVENTS_W TYPE SLIS_ALV_EVENT.
PERFORM GET_VAL.
REPID = SY-REPID.
SELECT LIFNR NAME1 FROM LFA1 INTO TABLE ITAB WHERE LIFNR IN VENDOR.
*perform val USING USER_COMMAND sel.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
IT_FIELDCAT = LFA1_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = ITAB.
*& Form GET_VAL
text this is to put column headings
FORM GET_VAL.
LFA1_W-FIELDNAME = 'LIFNR'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'LIFNR'.
APPEND LFA1_W TO LFA1_B.
LFA1_W-FIELDNAME = 'NAME1'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'NAME1'.
APPEND LFA1_W TO LFA1_B.
EKKO_W-FIELDNAME = 'EBELN'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'EBELN'.
APPEND EKKO_W TO EKKO_B.
EKKO_W-FIELDNAME = 'AEDAT'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'AEDAT'.
APPEND EKKO_W TO EKKO_B.
EKPO_W-FIELDNAME = 'EBELP'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'EBELP'.
APPEND EKPO_W TO EKPO_B.
EKPO_W-FIELDNAME = 'MATNR'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'MATNR'.
APPEND EKPO_W TO EKPO_B.
EVENTS_W-NAME = 'USER_COMMAND'.
EVENTS_W-FORM = 'VAL'.
APPEND EVENTS_W TO EVENTS_B.
ENDFORM. "GET_VAL
*& Form VAL
text
-->USER_COMMANtext
-->SEL text for retrieving data
FORM VAL USING USER_COMMAND LIKE SY-UCOMM SEL TYPE SLIS_SELFIELD.
DATA : VEN(10) TYPE N,
PO(10) TYPE N.
DATA : MAT(10) TYPE C.
IF SEL-FIELDNAME = 'LIFNR'.
VEN = SEL-VALUE.
SELECT EBELN AEDAT FROM EKKO INTO TABLE JTAB WHERE LIFNR = VEN.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
I_STRUCTURE_NAME = EKKO_B
IT_FIELDCAT = EKKO_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = JTAB.
ENDIF.
IF SEL-FIELDNAME = 'EBELN'.
PO = SEL-VALUE.
SELECT EBELP MATNR FROM EKPO INTO TABLE KTAB WHERE EBELN = PO.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
I_TITLE = 'ITEM DETAILS'
I_TABNAME = 'EKPO'
IT_FIELDCAT = EKPO_B
I_CALLBACK_PROGRAM = REPID
IMPORTING
ES_SELFIELD = SEL
TABLES
T_OUTTAB = KTAB.
ENDIF.
logic to select a record
IF SEL-FIELDNAME = 'MATNR'.
MAT = SEL-VALUE.
SET PARAMETER ID 'MAT' FIELD MAT.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. "VAL -
Any Function Module to get Service Conditions in Service Contracts???
Hi All,
I have created a function module inside which I have written BDC code for changing Service Contracts (ME32K).
I have used Item_condition and item_cond_validity structures in Table parameters.
For changing the conditions related to services, I need to know first which ones of those conditions were already there in the database for the contract and which ones are newly put in item_condition structure.
Similar reqmnt I had for Services also, for which I got the FM - MS_FETCH_SPEC_FOR_LIST, wherein I am giving Package number from Ekpo and getting the services related to item. I need something similar for Conditions also.
Is there any Function module wherein by giving the item and service info, I can get the conditions related to that particular Service? Or else any way using SAP std tables, I can get this info.
Please respond if anyone has this info.
Thanks a lot!
NavitaHi Mukesh,
Step 1. Use FM SO_USER_READ_API1 to get the folder details of the user
Step 2. Use FM SO_FOLDER_READ_API1 of the respective folder. You can read the Inbox, Workflow Inbox depending on what folder you read. The function modules are documented well as well with examples.
Hope this will help u,
Thanks & Regards
Kiran -
Any function module to get all items in SAP INBOX
hi All
I am trying to get all the items in my SAP Inbox via rfc.
Can anyone help me with any function module to get all items in SAP INBOX.
ThanksHi Mukesh,
Step 1. Use FM SO_USER_READ_API1 to get the folder details of the user
Step 2. Use FM SO_FOLDER_READ_API1 of the respective folder. You can read the Inbox, Workflow Inbox depending on what folder you read. The function modules are documented well as well with examples.
Hope this will help u,
Thanks & Regards
Kiran -
IS-R:functional modules in IS-Retail
Hi experts,
Can anyone tell me the" functional modules" of IS-Retail?Give all the functional modules which you use and give the T-code to execute them.
Regards
SwamyA function module is a separate program that can be called from your ABAP code to perform a specific task.
SAP comes with a library of pre-written function modules. Function modules are pooled together into function groups.
E.g. calendar functions
Function modules have a clearly defined fixed interface for data exchange.
As one of member suggested go to tcode se37 to explore functional builder.
You can display information about existing function modules:
Attributes: specifies administrative information like the person responsible for the module and a short description of the module.
Import: contains a list of the formal parameters that are used to pass data to a function module.
Export: contains a list of the formal parameters that are used to receive data from a function module.
Changing: contains a list of the formal parameters that are used both to pass data to and receive data from a function module.
Tables: specifies the tables that are to be passed to a function module. Table parameters are always passed by reference.
Exceptions: shows how the function module reacts to exceptions.
Source code: program code of the function module.
Documentation: provides information about the interface and exceptions.
For retail specific fuctional module, u can explore yourself on tcode se37.
Regards, -
Hello All,
I need a logic for re-cursive call.I am drilling down the BOM components.Example as below.
If I have A as header with B as component and again B may have C as component again C may have D and E as components in it.
Now if I pass A i should find B,C,D,E,F.
Please suggest somebody some idea how to get this logic?
I am using the function module CS_BOM_EXPL_MAT_V2 to get the components of a BOM.
Regards
MaheshWhen using the function module:
Export:
mehrs = 'X' "Multi Level
This sets the function module so it will return all the levels of the BOM. -
Documentation about this function module
ineed Documentation about this function module RP_ANSAL_FROM_PERNR
Hi Avinash,
Have a look at the function group program documentation.It gives an idea of what the function module does.
Short text
Annual Salary Functionality (ANSAL)
Description
This function group contains different functionality for calculating the annual salary, and calculating a period salary from the annual salary.
The function group evaluates different tables and features:
Tables
T503 defines whether an employee is paid on an
hourly basis or per period
T510W defines the time unit
T511 determines the relevant module from the annual
salary wage type, rounding, etc.
T539J defines the valid wage types for calculating
the annual salary
Features
ANSAL defines the annual salary wage type
PFREQ number of periods per year
Old U510F -> use T510F ?
Thanks
Lakshman -
Documentation for SAP function modules??
Hello,
is there any documentation for the SAP function modules available?
I need documentation for SJ01 (SAP Objects). If I try to view the documentation in SE80, I get the error message: "Document OJ_XXX(whatever I selected) is not available in language DE"
Where can I get this documentation?
Is there an overview+documentation available somewhere of all SAP functions which may be used for own programs? Or how do I know what's already available and how to use it?
Thanks
SteffiHi,
Go thru this links
http://sap.ittoolbox.com/topics/t.asp?t=303&p=449&h2=322&h1=303&h3=449
http://www.erpgenie.com/abap/functions.htm
Thanks
Sunil -
Documentation of the function module RSC1_ZDD_REPLAY_SET
I am looking for the documentation of the function module RSC1_ZDD_REPLAY_SET but could not find it in any language.
I am not a ABAP person so I am not familiar with ABAP, but I want to know what this functiond module does so I tried to look for a documentation, but could not.
Does anyone have any information on this function module?
Thanks.Thanks for the document.
I think this is what I was looking for.
So, the function module is used to transfer the monitor information that was collected in the mirror system in the scenario of to minimize the downtime for delta initialization.
Even though it is an old document, it looks like that this is also applicable to the BW release greater than 2.0B.
Thanks so much. -
Documentation on Function Modules,RFC,BAPI
hi friends,
I have to give training in these 3 topics(function module,RFC,BAPI) .can u please help me with the documentation part .
thankuhi,
give your mail id, such i can forward documents to that.
regards,
Pavan -
Documentation of function module
Hi All,
How to create documentation of function module while creating function module
Pl tell me step by step process
Helpfule answer will definatly rewarded
Regards
ShashikantHi Shashikanth,
go to tcode se37.
before creating a function module we have to create function group.
so to create function group.
chose menu path GOTO -- Function group -- create function group .
give the name of the FG.
again choose menuu path GOTO -Function group -- change group.
give the FG name and select MAIN PROGRAM tab and activate that one.
now create ur FM and click on functiona module documentation button on the application tool bar.
then u will get a PC Editor
in that u will have &FUNCTIONALITY& below this line write ur discription
and for all the remaining options such as &EXAMPLE& &HINTS& &FURTHER_SOURCES_OF_INF&
write ur desired documentation
Then in d application tool bar u will have an icon 'SCREEN OUTPUT' or press ctrlshiftF6.
then u will see the documenation.
Plz reward if helpful,
S.Gagnireddy.
Maybe you are looking for
-
How to put graphics into a JViewport?
Hi, I'm trying to make a simple game, where a block can move around in a 30x30 grid with collision detection. So far, it works alright, but I want the window to hold only 10x10 and for the block that is moving to stay at the center while the painted
-
IMac resolution problems.
I can no longer select 1920 x 1080 as a resolution option for my external display. I'm using iMac mid 2011 27 " using Mavericks and LG W2442PA. Firewire to HDMI. Has worked for the last 2 years with no problem. Suddenly not. The option to select thi
-
I purchased more than 20 ringtones since 2008. I recently changed my pc to imac and I also purchase iphone 5 at the same time. Now on my itunes account I have a proof of payment for my ringtones but when I looked at my purchased items they are not th
-
Hi, Is it possible to use hot keys or a combination of keys for performing actions in NW 7.1. Any help in this regard shall be highly appreciated. Regards, Himanshu
-
[Java 7] Zip file system does not handle nested zip files
The ZIP FileSystem which is shipped as an extension with Java7 does not support nested ZIP files. I.e., you can open the outer zip file as a FileSystem, but if you try to open an inner zip as a FileSystem, you get this exception: java.nio.file.Provid