Function module EPS_GET_DIRECTORY_LISTING not in background
Dear Experts
I am using FM 'EPS_GET_DIRECTORY_LISTING ' to get the list of files in application server directory. The FM worked very well for a few days. However, from last week it is throwing an expection "READ_DIRECTORY_FAILED" although there ain't any changes to source code of the program or parameter changes to the system.
Also, the FM works fine when the program is executed in foreground.However, it throws an exception when scheduled as a BG job.
Also,the program runs very well(both in foreground & background) in the developement system.
What could be the possible reasons for this?
Is it something related to time zone of the systems? My clients DEV system is set to time zone "INDIA" while PRD is det to time zone "CET". Could this be the reason?
Regards,
Rupesh
Hi Rupesh,
make sure that your program runs fine ion the right server in background mode.
If you define a background job in SM36, please fill out Exec. Target and choose the right server!
If you are working with
SUBMIT report ... VIA JOB ...
then change logic from
CALL FUNCTION JOB_OPEN
SUBMIT report VIA JOB
CALL FUNCTION JOB_CLODE
to
CALL FUNCTION JOB_OPEN
CALL FUNCTION JOB_SUBMIT
CALL FUNCTION JOB_CLODE
where you can pass parameter EXTPGM_SYSTEM for selecting the right server!
Regards,
Klaus
Edited by: Klaus Babl on May 11, 2011 6:52 AM
Edited by: Klaus Babl on May 11, 2011 6:56 AM
Similar Messages
-
Function Module (ENQUEUE_ES_PROG) not working in Background
I scheduled a job which runs every 15 mins in the the background to fetch data from an external system,depending on the data volume ,the program can sometimes run for over 15 minutes.To avoid data conflict I used a function module ENQUEUE_ES_PROG on the program to first check if the job started is still running before another job gets kicked.The problem I have is the fact that this function module does not seem to work in the background but in the looks perfect in foreground. Does anyone have a clue on how to use this FM for background job?
Hello Mochabo,
Consider the following scenario:
Your job is running for more than 15 minutes. Since it is running in the background, it will be executed by a work-process of type BACKGROUND. If there's only one BACKGROUND work process configured for your application server, then the second job will have to be waiting till the first one finishes and releases the background work process.
But when you are executing this in the foreground, the DIALOG work-process does the processing. So you are not finding any problem.
So, to my knowledge, there will be a problem when there's only one BACKGROUND work process. Please go to transaction SM50 and see how many of them are configured for the current application server.
Also, in case there's only one BACKGROUND work-process, you will not have toworry that the second job will start before the first has finished. It simply can't. It has got to wait.
Hope this explanation helps.
Regards,
Anand Mandalika. -
Function module is not working properly in background
Hi all,
i have used one Function module 'PRICING' in user exit SAPMV45A to calculate pricing for sales order.
i am using BAPI_SALESORDER_CHANGE to change the sales order pricing.
when i run the program in foreground, all condition records for pricing is updated correctly. but it is not updating
correctly when i run the program in background.
Please tell me wheather 'PRICING' or 'BAPI_SALESORDER_CHANGE' function module is not working properly in background ?
or any other reason?
Thanks
babuHi Pabitra,
Can you provide some more information as to the type of error you are getting? Or can you check the log entries and give some more information so that it would be possible to provide a solution.
And, try to put questions in proper Forum for quick and prompt reply.
Hope this helps.
Thanks,
Samantak. -
How to avoid use of function module in case of background jobs?
Hi ,
I am working a file tranfer interface .Functionality is to extract file either apllication or presentation server , and process the file through bapi , send the result in their respective server. This program should run through batch jobs in background mode.
I am using following function module :
SUBST_GET_FILE_LIS : Get the file list from application server
TMP_GUI_DIRECTORY_LIST_FILES : Get the file list from presentation server
GUI_UPLOad : to extract file data from presentation server
GUI_downLOAD : to download data to presentation server
in case of background job these function modules will not work.... so how to resolve this issue...
what are the methods we can apply?
Thanks & Regards
SandeepHi,
This FM is used to get list of files from Application server (will work in Background). This cannot be used to list files from presentation server. There is no way , by which you can process presentation server files in background mode.
Regards
Vinod -
Function module "GM_DOCUMENT_REVERSE" not found. after Patch Update
Hi Abapers/Basis
After patch update i am not able to do FBCJ reversal entry getting below error message.
Runtime Errors CALL_FUNCTION_NOT_FOUND
Exception CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 25.05.2011 14:43:26
Short text
Function module "GM_DOCUMENT_REVERSE" not found.
What happened?
The function module "GM_DOCUMENT_REVERSE" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLRWCL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "CALL_DISPATCHER_STORNO_R" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLRWCL" contains the CALL FUNCTION statement.
The name of the function module to be called is "GM_DOCUMENT_REVERSE".
No function module exists with the name "GM_DOCUMENT_REVERSE".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attention to
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
How to correct the error
Check the last transports to the SAP System.
Is the program "SAPLRWCL" currently being changed?
If an enqueue/dequeue module is involved, is the activation
of the lock object missing in the ABAP/4 Dictionary?
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CALL_FUNCTION_NOT_FOUND" "CX_SY_DYN_CALL_ILLEGAL_FUNC"
"SAPLRWCL" or "LRWCLF10"
"CALL_DISPATCHER_STORNO_R"
Function modules with names similar to "GM_DOCUMENT_REVERSE":
GM_DOCUMENT_CLOSE
GM_DOCUMENT_RECORD
GM_DOCUMENT_DELETE
GM_DOCUMENT_POST
GM_DOCUMENT_CHECK
G_DOCUMENT_RECORD
GJ_DOCUMENT_RECORD
GM_DOCUMENT_PROJECT
GET_DOCUMENTS
GM_DOCUMENT_DISPLAY
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
Moderator message: please don't just dump your dumps, search for SAP notes or open a call with SAP instead.
Edited by: Thomas Zloch on May 25, 2011 2:16 PMHi Karthik,
Thank you for ur reply.
I did not implement any user exit/ badi. Dump is saying that my smarform function module does not exist in the se37 library.
I have excuted my form through se38, that time is working fine. When i tried through output type it is going to dump.
Regards,
Kusuma. -
Function module does not exist in ECC 6.0
Hi All,
These two below function module does not exist in ECC 6.0 but exist in 4.6.Could you please let me know replacement of these two's.
FI_DOCUMENT_ARCH_READ_SINGLE
CHECK_IBAN_ACTIVE
Thanks
MohitHi,
Thanks for your reply.Could you please give me example that how to use it.
Thanks
Mohit -
Hi All,
When i execute the function module SAPWL_GET_SUMMARY_STATISTIC in CRM ABAP 6.0 passing the values below,
PERIODTYPE
HOSTID
STARTDATE
it's not showing any values in the summary.
it's showing the exporting parameters as,
RFC_ERROR_TYPE L
SUMMARY_AVAILABLE N
HITLISTS_N_PROFILES_AVAILABLE A
if this function module will not work means kindly provide me the solution for calculating
Average Response Time as in tcode st03 - Instance - total - Workload Overview.
Average CPU Time and some more fileds.
Regards,
SureshHi
I used the FM mentioned and found the details as below:
VKORG
TABNAME TVKO
FIELDNAME VKORG
LANGU EN
POSITION 0001
OFFSET 000006
DOMNAME VKORG
ROLLNAME VKORG
CHECKTABLE
VTEXT
TABNAME TVKOT
FIELDNAME VTEXT
LANGU EN
POSITION 0002
OFFSET 000014
DOMNAME TEXT20
ROLLNAME VTXTK
CHECKTABLE
LENG 000020
Shiva -
Check Function Module is not working
Hi All Expert,
I'm new in workflow and develop custom workflow for Transaction FB65 ( Vendor Credit Memo) and using business object FIPP , event CREATED.
Actually requirement is that when user click on park button in FB65 then should be trigger workflow only for particular vendor code .
Now my workflow is working fine for all vendor code.
For particular vendor code, I have created an new entries in SWE2 and assigning a check function module to that
Refer Link : http://www.****************/Tutorials/Workflow/checkfunctionmodule/demo.htm
and also same entries create in SWETYPV But Check Function Module is not working before workflow trigger.
Appreciate your help and support.
Regards
SaurabhHi
: Check FM : ZWF_DR_CR_MEMO
SourceCode :
FUNCTION ZWF_DR_CR_MEMO.
*"*"Local Interface:
*" IMPORTING
*" VALUE(OBJTYPE) LIKE SWETYPECOU-OBJTYPE
*" VALUE(OBJKEY) LIKE SWEINSTCOU-OBJKEY
*" VALUE(EVENT) LIKE SWETYPECOU-EVENT
*" VALUE(RECTYPE) LIKE SWETYPECOU-RECTYPE
*" EXPORTING
*" REFERENCE(RESULT) TYPE C
*" TABLES
*" EVENT_CONTAINER STRUCTURE SWCONT
*" EXCEPTIONS
*" NOT_TRIGGERED
BREAK-POINT.
TABLES : VBSEGK.
DATA : LV_VEND TYPE VBSEG-LIFNR.
CLEAR : LV_VEND.
SELECT SINGLE LIFNR FROM VBSEGK INTO LV_VEND WHERE BELNR EQ OBJKEY.
if sy-subrc eq 0
IF LV_VEND = '0000120510'.
RAISE NOT_TRIGGERED.
ENDIF
endif.
ENDFUNCTION. -
How to capture errors when a Function module is called as BACKGROUND TASK
How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
""Local interface:
*" IMPORTING
*" VALUE(IV_EXTERNAL_ID) TYPE RPM_TV_EXTID OPTIONAL
*" VALUE(IV_PROJECT_GUID) TYPE RPM_TV_GUID OPTIONAL
*" VALUE(FLAG) TYPE BOOLEAN OPTIONAL
*" EXPORTING
*" VALUE(EV_RC) TYPE I
*" VALUE(EV_MSG) TYPE STRING
*" VALUE(ET_MSG) TYPE RPM_TT_MESSAGES
IF flag = cl_rpm_co=>sc_true.
Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
EXPORTING
IV_EXTERNAL_ID = IV_EXTERNAL_ID
IV_PROJECT_GUID = IV_PROJECT_GUID
IMPORTING
EV_RC = EV_RC
EV_MSG = EV_RC
ET_MSG = ET_MSG.
COMMIT WORK.
ELSE.
CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
EXPORTING
IV_EXTERNAL_ID = IV_EXTERNAL_ID
IV_PROJECT_GUID = IV_PROJECT_GUID
IMPORTING
EV_RC = EV_RC
EV_MSG = EV_MSG
ET_MSG = ET_MSG.
ENDIF.
ENDFUNCTION.
In above code how to capture 'EV_RC' when FM is called as background task.Prakash,
CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
The calling program can only handle errors of remote function calls (RFC) if these are either
- synchronous RFC (that is CALL FUNCTION ... DESTINATION ...) or
- asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic. -
Error in ERM: Function module does not exist
Hi all,
Lately, we are experiencing a frequent error in ERM (5.3 SP 15.0) that we had not had before. We are unsure what caused the error. The message displayed to the user is "Unhandled error". The log error message is "Message Code is 651 Messsage Details Function module does not exist Message Type is E" (see full logs below).
The error occurs for example, when users are trying to generate derived roles after saving the org values for the derived role during the methodology process, or when administrators are trying to update the impacted derived roles after for org value mappings.
Has anyone experienced this or someting similar before? Any ideas what could be the reason here?
Thanks!
Patrick
Edited by: Patrick Weyers on Sep 15, 2011 9:36 AMLog extract:
2011-09-15 09:05:15,103 [SAPEngine_Application_Thread[impl:3]_18] ERROR Message Code is 651 Messsage Details Function module does not exist Message Type is E
java.lang.Throwable: Message Code is 651 Messsage Details Function module does not exist Message Type is E
at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1064)
at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
2011-09-15 09:05:15,105 [SAPEngine_Application_Thread[impl:3]_18] ERROR com.virsa.re.role.actions.AuthAuthorizationDataAction
java.lang.Throwable: java.lang.NullPointerException
at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1084)
at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) -
Pls help in WEBDYNPRO Function Module 'RFC_START_PROGRAM' not found error
Dear Friends,
While i am calling one function module in webdynpro the follwing erroe is coming.
Error:-
Function Module 'RFC_START_PROGRAM' not found error
Code:-
CALL FUNCTION 'ZUPDATE' DESTINATION 'PCNCLNT300'
EXPORTING
im_material = item_matnr
im_vornr = item_vornr
im_sheet = item_sheet
IMPORTING
value = ZMESSAGE .Hi,
try declarig variable of type rfc_dest
data: lv_dest type rfc_dest.
call....
destination lv_dest
offcourse make sure your rfc destination has that name in sm59
and you have the corect authorizations to your user in the remote system
Are you btw sure that there is no screen action called inside
the function module? popup or something? because you cannot
call functions that have screen interaction like in sapgui
grtz,
Koen -
Error 'Function module "IAOM_ACCOUNT_MANAGER" not found' in RPM_FIN02.
Hi,
When I am trying to run report RPM_FIN02 in ERP system, I am getting error ''Function module "IAOM_ACCOUNT_MANAGER" not found'.
Please note i have done required configration in both systems i.e. cProject and ERP.
Can somebody help me on this?
Regards,
ManojThanks for your input.
This note is already implemented in our system.
Anyway my problem is solved.The problem was in our configration.
Regards,
Manoj -
Function module "RSAOU_BWBC_GET" not fou nd. Message no. RSAR051
when I active a datasoure in BW systme the system tell me this "Function module "RSAOU_BWBC_GET" not fou nd Message no. RSAR051" .
I have conecting to R3 system in Sm59 ,and I active datasoure in R3 system use rsa5 and use rsa6 transport datasoure ,and replicate metadata in BW system ,but when I active this datasoure system tell me abover.
some can tell me what is wrong hanppen,and how i will to do for this .Hi,
as I already posted in the other thread,
check note 1257942
regards
Siggi.
I have look at this note ,but my basic tell me that he not found support package 21 for SAP NetWeaver BI 7.00,
so you can tell me more about it ,thanks very much! -
XI datasources function modules does not exist after BW upgrade to 7.3
We have recently upgraded our dev BI system to 7.3
During our testing phase we found that we are unable to load data coming from XI system.
When we checked the functional modules of the XI(web services)
datasources we found that the function modules does not exist in the system.
Eg : For our GECARS datasource we have 2 funcitonal modules
1. /BIO/QI6AZXH_ZIFIGECARS
2. /BIO/QI6AZXH_ZIFIGECARS_RFC (delta function module)
we have activated resp datasource and found that code for
/BIO/QI6AZXH_ZIFIGECARS exist now but we are facing issues with RFC
funciton modules (/BIO/QI6AZXH_ZIFIGECARS_RFC )
To put it in simple terms we are facing issues with Dev BI since upgradeto 7.3 with respect to RFC and non-availability of function modules.
Kindly help us in resolving this.
Thanks,
KiranHello Kiran,
Have you found the reason for the non existence of the FM in the system after the upgrade?
Have you found any alternative? I hope you would have created an OSS message, if so whats the response have you got?
Kindly let me know as I am experiencing similar issue where one of the FM (RSDRC_MULTIPROV_GET_MAPPING) does not exist in BI system after the upgrade.
Regards,
Vinoth V -
Function module "OCS_ALV_UI_QTRACE_AVAILABILITY" not found.
Hi,Guy ,
When we use the spam ,the system raise an Abap dump ,the message is :
Function module "OCS_ALV_UI_QTRACE_AVAILABILITY" not found.
My System is ECC6.0
can anybody tell me how to solve it ?thanks in advance .
Jialiang.QiuHi all, I've same problem,
do you know the solution?
Maybe you are looking for
-
Disk Utility: Strange permissions repair results
Hi, can anyone explain what these results mean? (D.U. cannot fix these errors.) Thank you very much! Peter Repairing permissions for "iMac" Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired. Warning: SUID file "Syst
-
What is the quality of a DVD burned with the Toast BluRay plug-in?
I would like to purchase the plug-in for Toast 9 that allows you to burn BluRay content onto a DVD. I realize that it will not produce a "real" BD, but will it produce DVDs that are more HD quality than the normal SD quality? Rick
-
Column Filterring and Mapping using SQLEXEC in Golden Gate
I am trying to execute a Stored procedure using SQLEXEC command. The procedure scott.get_script_id (replicat side) updates the columns based on the values came from source (extract side). But I am getting following error: create or replace procedure
-
Browsing in iTunes Store is flawed?
Hi All, When browsing the categories in the pod-casting directory, I've started getting the text listing, as you can see below. I can't get back to the graphical interface with the artwork displayed. When I hit the 'eye' icon in the lower right, it b
-
Changer de langue CS6 Néerlandais vers Francais
Bonjour, J'ai installé une version de logiciel CS6 Web Design sur une ordinateur dont la licence était en néerlandais car c'est ce que le magasin m'a vendu. Je souhaiterais avoir toute la suite en français. Comment puis-je faire ? D'avance, je vous r