Function Module Error In Uploading Data for Basic Pay Infotype

Hi All,
I'm trying to upload data into Basic Pay Infotype 0008 Using LSMW Subtype 0(Basic Contract). While we are trying to input values into ANSAL(Annual Salary) field directly using default wage type as 1000.
We are gettting a error in function module RP_ANSAL_FROM_WAGETYPES.
and eventhough we are inputting values into ANSAL field it is taking it as 0.00 by default .
Kidly suggest me solution.
Thanks,
Vasanth

Hi ..
check this
765785
673372
730976
note 1032950
http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/content.htm
Message was edited by:
hari kv

Similar Messages

Function module to determine the date for the nth weekday of the mth month

Hey folks,
Is there a function module which determines the date for the mth weekday of the nth month in the pth year.
For instance, if I input 2nd thursday of the 4th month in 2008, it should return me, 04/10/2008 (MM/DD/YYYY).
Thanks and Best Regards,
Puja.

Hi Ravi,
Hadn't been able to work on this lately...You solution was quite close, but did not work for a few scenarios....I tweaked the logic a bit to take care of them as well...
So here goes the code:
================================================
DATA first_day_of_month TYPE datum.
DATA day TYPE p.
CONCATENATE year month '01' INTO first_day_of_month.
CALL FUNCTION 'DAY_IN_WEEK'
    EXPORTING
      datum = first_day_of_month
    IMPORTING
      wotnr = day.
DATA day_number TYPE numc2.
IF day = weekday.
    IF recur = 1.
      DATA ls_date(10) TYPE c.
      CONCATENATE month '/01/' year INTO ls_date.
      CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
        EXPORTING
          date_external                  = ls_date
       IMPORTING
         date_internal                  = date.
    ELSE.
      day_number = ( ( recur - 1 ) * 7 ) + 1.
    ENDIF.
ELSEIF day < weekday.
    day_number = ( ( recur - 1 ) * 7 ) + ( weekday - day ) + 1.
ELSE.
    day_number = ( ( recur - 1 ) * 7 ) + ( 7 - day ) + weekday + 1.
ENDIF.
IF date IS INITIAL.
    CONCATENATE year month day_number INTO date.
ENDIF.
====================================
There still could be some loopholes in this....am not sure....but it sure did seem to work for a couple of random checks that I performed.
Brownie points to you for giving me a direction.
Thanks,
Puja.

Function module to predict the date for a given date

hi friends,
is there any function module to predict the date
means for example if i enter one date , what will be the date
after 4 months(say) to the given date.
my requirement is when a person is hired today (10.06.2008)
and if he is under probationary for 6 months, then on what date he comes into the permenant employee's list(predicted date after date 6 months)

Date calculations
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
   anzahl_jahre = 1
   anzahl_monate = 2
   anzahl_tage   = 3
   datum_ein     = '20010101'
IMPORTING
   datum_aus     = l_new_date.
   Result:
   l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.

Function module to choose the file for download and upload

what is the function module to choose the file for download and upload for presentation server.
give me with example

Please search in SCN.
This has been discussed so many times.

11.5.10.2 to R12.1.1 upgrade: Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called

Hello,
EBS version : 11.5.10.2
DB version : 11.2.0.3
OS version : AIX 6.1
As a part of 11.5.10.2 to R12.1.1 upgrade, while applying merged 12.1.1 upgrade driver(u6678700.drv), we got below error :
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ATTENTION: All workers either have failed or are waiting:
           FAILED: file glsupdas.ldt on worker 3.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 adwork003.log
Restarting job that failed and was fixed.
Time when worker restarted job: Wed Aug 07 2013 10:36:14
Loading data using FNDLOAD function.
FNDLOAD APPS/***** 0 Y UPLOAD @SQLGL:patch/115/import/glnlsdas.lct @SQLGL:patch/115/import/US/glsupdas.ldt -
Connecting to APPS......Connected successfully.
Calling FNDLOAD function.
Returned from FNDLOAD function.
Log file: /fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log/US_glsupdas_ldt.log
Error calling FNDLOAD function.
Time when worker failed: Wed Aug 07 2013 10:36:14
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log>tail -20 US_glsupdas_ldt.log
Current system time is Wed Aug 7 10:36:14 2013
Uploading from the data file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dumping from LCT/LDT files (/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0), /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt) to staging tables
Dumping LCT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0) into FND_SEED_STAGE_CONFIG
Dumping LDT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS , GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS ) into FND_SEED_STAGE_ENTITY
Uploading from staging tables
Error loading seed data for GL_DEFAS_ACCESS_SETS: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: could not find program unit being called
Concurrent request completed
Current system time is Wed Aug 7 10:36:14 2013
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Below is info about file versions and INVALID packages related to GL.
PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG is invalid with error component 'GL_DEFAS_DBNAME_S' must be declared.
I can see GL_DEFAS_DBNAME_S is a VALID sequence accessible by apps user with or without specifying GL as owner.
SQL> select text from dba_source where name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG') and line=2;
TEXT
/* $Header: glistdds.pls 120.4 2005/05/05 01:23:16 kvora ship $ */
/* $Header: glistddb.pls 120.16 2006/04/10 21:28:48 cma ship $ */
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
SQL> select * from all_objects where object_name in ('GL_DEFAS_ACCESS_DETAILS_PKG','GL_DEFAS_ACCESS_SETS_PKG')
2 ; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1118545 PACKAGE 05-AUG-13 05-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1118548 PACKAGE 05-AUG-13 06-AUG-13 2013-08-05:18:54:51 VALID N N N 1
APPS GL_DEFAS_ACCESS_SETS_PKG 1128507 PACKAGE BODY 05-AUG-13 06-AUG-13 2013-08-06:12:56:50 INVALID N N N 2
APPS GL_DEFAS_ACCESS_DETAILS_PKG 1128508 PACKAGE BODY 05-AUG-13 05-AUG-13 2013-08-05:19:43:51 VALID N N N 2
SQL> select * from all_objects where object_name='GL_DEFAS_DBNAME_S'; OWNER OBJECT_NAME SUBOBJECT_NAM OBJECT_ID DATA_OBJECT_ID OBJECT_TYPE CREATED LAST_DDL_TIME TIMESTAMP STATUS T G S NAMESPACE
EDITION_NAME
GL GL_DEFAS_DBNAME_S 1087285 SEQUENCE 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
APPS GL_DEFAS_DBNAME_S 1087299 SYNONYM 05-AUG-13 05-AUG-13 2013-08-05:17:34:43 VALIDN N N 1
SQL> conn apps/apps
Connected.
SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE, STATUS
FROM DBA_OBJECTS
WHERE OBJECT_NAME = 'GL_DEFAS_ACCESS_SETS_PKG'; 2 3 OWNER OBJECT_NAME OBJECT_TYPE STATUS
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE VALID
APPS GL_DEFAS_ACCESS_SETS_PKG PACKAGE BODY INVALID SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE; Warning: Package altered with compilation errors. SQL> show error
No errors.
SQL> ALTER PACKAGE GL_DEFAS_ACCESS_SETS_PKG COMPILE BODY; Warning: Package Body altered with compilation errors. SQL> show error
Errors for PACKAGE BODY GL_DEFAS_ACCESS_SETS_PKG: LINE/COL ERROR
39/17 PLS-00302: component 'GL_DEFAS_DBNAME_S' must be declared
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>cat $GL_TOP/patch/115/sql/glistdab.pls|grep -n GL_DEFAS_DBNAME_S
68: SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
81: fnd_message.set_token('SEQUENCE', 'GL_DEFAS_DBNAME_S');
SQL> show user
USER is "APPS"
SQL> SELECT GL.GL_DEFAS_DBNAME_S.NEXTVAL
FROM dual; 2                         -- with GL.
NEXTVAL
1002
SQL> SELECT GL_DEFAS_DBNAME_S.NEXTVAL from dual;               --without GL. or using synonym.
NEXTVAL
1003
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdab.pls|grep '$Header'
REM | $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ |
/* $Header: glistdab.pls 120.5 2006/03/13 19:56:21 cma ship $ */
drix10:/fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/odf>strings -a $GL_TOP/patch/115/sql/glistdas.pls |grep '$Header'
REM | $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ |
/* $Header: glistdas.pls 120.4 2005/05/05 01:23:02 kvora ship $ */

Functionality / modules currently available in MySAP for asset tracking.

Hi All,
We have a new requirement in the asset accounting. If any one have come accross can you let me know the feasibility and the process.
1.Functionality / modules currently available in MySAP for asset tracking.
2.Could MySAP support data input from other external devices e.g. scanner.
3.What kind of asset level info is stored in MySAP and how they are modified along the asset life cycle
Thanks nd Regards
Srihari Bolla

Yes this is possible.
In the asset itself you have the fields Last inventory on and Include asset in inventory list
From SAP you can print barcodes (asset and asset sub number) that you can put on your assets TC S_ALR_87010137 - Bar Codes . There is a standard SAP script for this, but you can create your own one.
The date you want to use for your tracking you can get ot ouf the table ANLA
For all the barcode's reader there is software that can create a file. This file you upload with an LSMW in SAP that updates the field Last inventory on.

BDC Program for Uploading Data for Property Tree in cg02

Hi,
How to upload data for property tree ( standard Properties ) of CG02. I checked for BAPI or Function Module but most them supports for specification header and sub item.
Please Let me know if any function module or BAPI available for this process. I tried with BDC Program, but it fails.
Regards,
Rajesh Kumar Murugesan

Hallo Rajesh
take a look here:
http://help.sap.com/erp2005_ehp_06/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Chapter "Import and Export".
1.) Reads cross these further chapters:
"Tools (EHS-BD-TLS)" => "IMport and Export" => "Import: Process" => "Specifying the Sequence of the External Data Structure " => "External File Structure: Specification"
Here you will learn how to prepare the data. In chapter:" Example: Transfer File for Specifications" you will find an example of an file whcih could be used to upload data in the property tree
2.) Chapter:" Importing Specifications" is explaining the steps whcih are need to populate the property with data using the file as prepared; read cross chapter "Specification Import Control"
I hope this helps.
C.B.
Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM
Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM

How to down lode function module & how to uploaded

Dear friends,
Iam trying 2 transport request 4m development 2 production ,
unknowing i deleted customized function module,
Same functional module was in other client plz guide me how to downloaded functional module & how to up lode ,
How to down lode function module & how to uploaded
Regards,
Reddy

Hello,
Create a request of type Transport of Copies.
Go to transaction SE03 , select the option Include Objects in a Transport Request, select the object, include in your request and liberate it.
Then copy the DATA and COFILE of this request to your destination system and import it in transaction STMS.
Take a look at this: Transport error!
Regards,

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Existing Function modules or Standard upload Programs

Hi,
Can any one tell, Are there any Function modules or Standard upload programs exists for following transactions:
Creating production version(C223)
Creating Master recipe(C201)
Creation Apportionment Structure(C202)
Creation BOM Allocation(CS08)
(This all tcodes comes under Production planning.)
Thanks in advance.

Hi Vanitha,
Check this
for C223
CM_FV_PROD_VERS_MAINTAIN
CM_FV_PROD_VERS_SAVE
CM_FV_PROD_VERS_SAVE_ALL
CY01_ORDER_MODIFY_PROD_VERSION
For C201
C2_CU_RECIPE_EXCLUDE_CREATE
CONTROL_RECIPE_CREATE
For C202
APPOINTMENT_GRP_CREATE
APPOINTMENT_CREATE
APPOINTMENT_GENERATE
APPOINTMENT_GENERATE_2
For CS08
CSAP_MAT_BOM_ALLOC_CREATE
Hope it helps...
Lokesh
pls. reward appropriate points
Message was edited by: Lokesh Aggarwal

Function Module to Delete ODS Data based on Request

Hi All,
Is there any specific function module to delete ODS data based on Request.
I found the program RS_DEL_ODS_1 which is using the FM RSAR_ODS_API_DEL.
But this FM is deleting the request at PSA level.
Is there any alternate FM?Or is there any ABAP Program or so?

Hi,
Deletion of specific request is not perimitted for ODS objects. You can delete the most recent request, but if you delete any previous requests, all the requests up to that request will also be deleted.
You can do it by write an ABAP program to identify the specific requests to be deleted for ODS.
Regards
CSM Reddy

Is there any function module to convert the date format

Dear ABAPers,
Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
       I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
Thanks & Regards,
Ashok.

hi,
create custom function module or copy the below code in the report ..and use it
the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
""Local interface:
*"       IMPORTING
*"             VALUE(DATE) LIKE SY-DATUM
*"       EXPORTING
*"             VALUE(FORMATTED_DATE)
*"       EXCEPTIONS
*"              INVALID_DATE
TABLES: TTDTG.
DATA: BEGIN OF T_DATE,
        YYYY(4) TYPE C,
        MM(2) TYPE C,
        DD(2) TYPE C,
      END OF T_DATE.
DATA: DAY(3) TYPE N.
DATA: VARNAME LIKE TTDTG-VARNAME.
IF DATE IS INITIAL.
CLEAR FORMATTED_DATE.
EXIT.
ENDIF.
check document date format
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
    DATE = DATE
EXCEPTIONS
    PLAUSIBILITY_CHECK_FAILED = 1.
IF SY-SUBRC NE 0.
RAISE INVALID_DATE.
ENDIF.
MOVE DATE TO T_DATE.
CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
WRITE T_DATE-DD TO DAY.
CONCATENATE DAY ',' INTO DAY.
CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
SEPARATED BY SPACE.
ENDFUNCTION.
the output is :--Convert a DATE field into a full format date eg. March 23, 2000
Regards,
Prabhudas

Function Module to determine due date in BI form Payment Terms

Hi to all,
Can any one tell me what is the Function Module to determine due date in BI, form ZTERM ( Payment Terms ).
I am working on Accounts Receivable (AR). and need to calculate Due date.
I shall be thankful to you for this.
Regards
Pavneet Rana

Thanks For reply,
I have to do aging for Receivables and report format is like that.
                1 - 10      11 - 30        31 - 60         61 - 90       > 90     Notoverdue   Overdue
North
East
south
West
According to client requirement in first 5 bucket i need to display Receivables according to aging
and for Notoverdue   Overdue bucket condition is like that.
if sy-datum - vbrk-fkdat > 0NETDUEDATE then it is under Overdue bucket
if sy-datum - vbrk-fkdat < 0NETDUEDATE then it is under notOverdue bucket
there i have created 2 DSO , one for sales which have North,East,south,West and vbrk-fkdat using 2LIS_13_VDHDR,2LIS_13_VDITM
and other DSO which will have 0NETDUEDATE from 0FI_AR_4 .
for Notoverdue   Overdue how i will calculate aging at query level.
also is 0p_keydt is variable for 0CALDAY which will take user entery and should i applied offcet, to get firts 5 bucket Receivables data for aging.
i shall be thankful to you for this.
Regards
Pavneet Rana

Function module to fine closest date among given date

Hi All,
Is there any function module to find closest date among given dates?
Thanks in advance

Hi
I think there is no FM module available which will satisy this requirement...
But You can develope one ZFM or You can write a code for it...
Logic will be
Check out below code...
PARAMETERS : P_DATE TYPE SY-DATUM DEFAULT '20090909'.
DATA : BEGIN OF WA_ITAB,
        DATE TYPE SY-DATUM,
       END OF WA_ITAB.
DATA : ITAB LIKE STANDARD TABLE OF WA_ITAB.
DATA : IND TYPE SY-TABIX,
        IND2 TYPE SY-TABIX,
        IND3 TYPE SY-TABIX,
        DATE1 TYPE SY-DATUM,
        DATE2 TYPE SY-DATUM,
        DIFF1 TYPE I,
        DIFF2 TYPE I,
        UTTER_CLOSE TYPE SY-DATUM.
CLEAR : WA_ITAB, ITAB[].
WA_ITAB-DATE = '20090824'.
APPEND WA_ITAB TO ITAB.
CLEAR : WA_ITAB.
WA_ITAB-DATE = '20090901'.
APPEND WA_ITAB TO ITAB.
CLEAR : WA_ITAB.
WA_ITAB-DATE = '20090912'.
APPEND WA_ITAB TO ITAB.
CLEAR : WA_ITAB.
WA_ITAB-DATE = '20090930'.
APPEND WA_ITAB TO ITAB.
CLEAR : WA_ITAB.
WA_ITAB-DATE = '20091011'.
APPEND WA_ITAB TO ITAB.
CLEAR : WA_ITAB.
WA_ITAB-DATE = P_DATE. " P_DATE ==> Your Key Date
APPEND WA_ITAB TO ITAB.
CLEAR : WA_ITAB.
SORT ITAB BY DATE.
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING DATE.
READ TABLE ITAB INTO WA_ITAB WITH KEY DATE = P_DATE.
IF SY-SUBRC = 0.
IND = SY-TABIX.
ENDIF.
IND2 = IND - 1.
IND3 = IND + 1.
READ TABLE ITAB INTO WA_ITAB INDEX IND2.
IF SY-SUBRC = 0.
DATE1 = WA_ITAB-DATE.
ENDIF.
READ TABLE ITAB INTO WA_ITAB INDEX IND3.
IF SY-SUBRC = 0.
DATE2 = WA_ITAB-DATE.
ENDIF.
CLEAR : DIFF1 , DIFF2.
DIFF1 = P_DATE - DATE1.
DIFF2 = P_DATE - DATE2.
IF DIFF1 = DIFF2.
UTTER_CLOSE = DATE1. " or date2 either
ELSEIF DIFF1 > DIFF2.
UTTER_CLOSE = DATE2.
ELSEIF DIFF1 < DIFF2.
UTTER_CLOSE = DATE1.
ENDIF.
WRITE : / 'Key Date ' , P_DATE.
WRITE : / 'Lower Closest Date ' , DATE1.
WRITE : / 'Upper Closest Date ' , DATE2.
WRITE : / 'Utter Close Date based on key date ', P_DATE , ' is ' , UTTER_CLOSE.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya
Edited by: ilesh 24x7 on Sep 19, 2009 3:54 PM

ABAP Function Module Example to move data from one Cube into Another

Hi experts,
Can any please help out in this ..?
A Simple ABAP Function Module Example to move data from one Cube into Another Cube
(How do i send the data from one client to another client using Function moduel).
Thanks
-Upen.
Moderator message: too vague, help not possible, please describe problems in all technical detail when posting again, BI related? ("cube"), also search for information before asking.
Edited by: Thomas Zloch on Oct 29, 2010 1:19 PM

This is the start routine to duplicate records in two currencies.
DATA: datew   TYPE /bi0/oidateto,
      datew2 TYPE rsgeneral-chavl,
      fweek   TYPE rsgeneral-chavl,
      prodhier TYPE /bi0/oiprod_hier,
      market TYPE /bic/oima_seg,
      segment TYPE /bic/oizsegment.
DATA: BEGIN OF S_DATA_PACK OCCURS 0.
        INCLUDE STRUCTURE /BIC/CS8ZSDREV.
DATA: END OF S_DATA_PACK.
S_DATA_PACK[] = DATA_PACKAGE[].
REFRESH DATA_PACKAGE.
LOOP AT S_DATA_PACK.
    move-corresponding s_data_pack to DATA_PACKAGE.
    if DATA_PACKAGE-loc_currcy = 'EUR'.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalloc.
      DATA_PACKAGE-CURRENCY = 'EUR'.
      APPEND DATA_PACKAGE.
    else.
      DATA_PACKAGE-netval_inv = DATA_PACKAGE-/bic/zsdvalgrc.
      DATA_PACKAGE-CURRENCY = 'USD'.
      APPEND DATA_PACKAGE.
    endif.
ENDLOOP.
This is to load Quantity field
RESULT = COMM_STRUCTURE-BILL_QTY.
This is to load Value field
RESULT = COMM_STRUCTURE-NETVAL_INV.
UNIT = COMM_STRUCTURE-currency.

Function Module Error In Uploading Data for Basic Pay Infotype

Similar Messages

Maybe you are looking for