Function module for dynamic view generation

Hi experts,
I am trying to dynamically convert all the screens used by a module pool program into their
corresponding views in Web Dynpro environment. Although there is a function module used by the web
dynpro conversion wizard tool in SE80, this does not generate views dynamically but only
statically. Can anybody please tell me a module which can perform this conversion of screens into views when
the module pool program name is specified dynamically at runtime?
Thanks in advance.............
Edited by: Adithya K Ramesh on Oct 12, 2010 2:51 PM

Similar Messages

FUNCTION MODULE FOR AUTOMATIC MAIL GENERATION

Hello,
I want to generate an automatic mail of a scheduled report on everyday basis.
the output spool req of scheduled report in generated n saved inside the system.
Could you please help me in generating automatic mail through that saved spool request?
Regards,
Krutika

hi,
use:
DATA: lv_filesize    TYPE i,
        lv_buffer      TYPE string,
        lv_attachment TYPE i,
        lv_testo       TYPE i.
DATA: li_pdfdata TYPE STANDARD TABLE OF tline,
        li_mess_att TYPE STANDARD TABLE OF solisti1,
        li_mtab_pdf TYPE STANDARD TABLE OF tline,
        li_objpack TYPE STANDARD TABLE OF sopcklsti1,
        li_objtxt   TYPE STANDARD TABLE OF solisti1,
        li_objbin   TYPE STANDARD TABLE OF solisti1,
        li_reclist TYPE STANDARD TABLE OF somlreci1,
        li_objhead TYPE soli_tab.
DATA: lwa_pdfdata TYPE tline,
        lwa_objpack TYPE sopcklsti1,
        lwa_mess_att TYPE solisti1,
        lwa_objtxt   TYPE solisti1,
        lwa_objbin   TYPE solisti1,
        lwa_reclist TYPE somlreci1,
        lwa_doc_chng TYPE sodocchgi1.
CONSTANTS: lc_u           TYPE char1 VALUE 'U',
             lc_0           TYPE char1 VALUE '0',
             lc_1           TYPE char1 VALUE '1',
             lc_pdf         TYPE char3 VALUE 'PDF',
             lc_raw         TYPE char3 VALUE 'RAW',
             lc_ordform     TYPE char15 VALUE 'ZORDCONFIRM_01',
             lc_attachment TYPE char10 VALUE 'ATTACHMENT'.
CALL FUNCTION 'CONVERT_OTF'
    EXPORTING
      format                = lc_pdf
      max_linewidth         = 132
    IMPORTING
      bin_filesize          = lv_filesize
    TABLES
      otf                   = pv_otfdata
      lines                 = li_pdfdata
    EXCEPTIONS
      err_max_linewidth     = 1
      err_format            = 2
      err_conv_not_possible = 3
      err_bad_otf           = 4
      OTHERS                = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT li_pdfdata INTO lwa_pdfdata.
    TRANSLATE lwa_pdfdata USING ' ~'.
    CONCATENATE lv_buffer lwa_pdfdata INTO lv_buffer.
    CLEAR lwa_pdfdata.
ENDLOOP.
TRANSLATE lv_buffer USING '~ '.
DO.
    lwa_mess_att = lv_buffer.
    APPEND lwa_mess_att TO li_mess_att.
    CLEAR lwa_mess_att.
    SHIFT lv_buffer LEFT BY 255 PLACES.
    IF lv_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
Object with PDF.
REFRESH li_objbin.
li_objbin[] = li_mess_att[].
DESCRIBE TABLE li_objbin LINES lv_attachment.
Object with main text of the mail.
lwa_objtxt = space.
APPEND lwa_objtxt TO li_objtxt.
CLEAR lwa_objtxt.
DESCRIBE TABLE li_objtxt LINES lv_testo.
Create the document which is to be sent
lwa_doc_chng-obj_name = text-008.
lwa_doc_chng-obj_descr = text-008.
lwa_doc_chng-sensitivty = lc_0.
lwa_doc_chng-obj_prio = lc_1.
lwa_doc_chng-doc_size = lv_testo * 225.
Pack to main body.
CLEAR lwa_objpack-transf_bin.
header
lwa_objpack-head_start = 1.
The document needs no header (head_num = 0)
lwa_objpack-head_num   = 0.
body
lwa_objpack-body_start = 1.
lwa_objpack-body_num   = lv_testo.
lwa_objpack-doc_type   = lc_raw.
APPEND lwa_objpack TO li_objpack.
CLEAR lwa_objpack.
Create the attachment.
Fill the fields of the packing_list for the attachment:
lwa_objpack-transf_bin = gc_x .
header
lwa_objpack-head_start = 1.
lwa_objpack-head_num   = 1.
body
lwa_objpack-body_start = 1.
lwa_objpack-body_num   = lv_attachment.
lwa_objpack-doc_type   = lc_pdf.
lwa_objpack-obj_name   = lc_attachment.
lwa_objpack-obj_descr = text-008.
lwa_objpack-doc_size = lv_attachment * 255.
APPEND lwa_objpack TO li_objpack.
CLEAR lwa_objpack.
lwa_reclist-receiver   = pv_emailid.
lwa_reclist-rec_type   = lc_u.
lwa_reclist-notif_del = gc_x.
lwa_reclist-notif_ndel = gc_x.
APPEND lwa_reclist TO li_reclist.
IF li_reclist IS NOT INITIAL.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = lwa_doc_chng
        put_in_outbox              = gc_x
      TABLES
        packing_list               = li_objpack
        object_header              = li_objhead
        contents_bin               = li_objbin
        contents_txt               = li_objtxt
        receivers                  = li_reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    IF sy-subrc <> 0.
         MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.

In function module creation,table, view is better or structure is better ?

I am creating a new z function module.
Under tables parameter, I need to create 'Profit_Center_Table' which should contain combination of ztable and cepc fields.
as
Tables
Profit_Center_Table should contain List of ztable and cepc fields
Is it okay, if I create a view with the combination of ztable and cepc fields
And use the view under tables tab page in my zfunction module ?
Or it is better to create a structure with the combination of ztable and cepc fields

hi,
better to create structure or internal table with all the required fields.
we can export and import internal tables to function module by using TABLES parameter interface.
if you create View, how can you pass to the function module.
as per my knowledge no parameter interface is availabe to pass views to function module.
for more information follow this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/d1/801ef5454211d189710000e8322d00/frameset.htm
regards,
Ashokreddy
Message was edited by:
Ashok Reddy

Function module for F4 help download

HI Experts
What is the function module for F4 help download.
Thanks in advance

Hi,
Function module is F4IF_FIELD_VALUE_REQUEST.
Use the Function moduel like this in this i create screen 100 by using se51.
REPORT zcl_f4_help.
TYPES: BEGIN OF values,
         carrid TYPE spfli-carrid,
         connid TYPE spfli-connid,
       END OF values.
DATA: carrier(3) TYPE c,
      connection(4) TYPE c.
DATA: progname TYPE sy-repid,
      dynnum   TYPE sy-dynnr,
      dynpro_values TYPE TABLE OF dynpread,
      field_value LIKE LINE OF dynpro_values,
      values_tab TYPE TABLE OF values.
CALL SCREEN 100.
MODULE init OUTPUT.
progname = sy-repid.
dynnum   = sy-dynnr.
CLEAR: field_value, dynpro_values.
field_value-fieldname = 'CARRIER'.
APPEND field_value TO dynpro_values.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE value_carrier INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
            tabname     = 'DEMOF4HELP'
            fieldname   = 'CARRIER1'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'CARRIER'.
ENDMODULE.
MODULE value_connection INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
            dyname             = progname
            dynumb             = dynnum
            translate_to_upper = 'X'
       TABLES
            dynpfields         = dynpro_values.
READ TABLE dynpro_values INDEX 1 INTO field_value.
SELECT carrid connid
    FROM spfli
    INTO CORRESPONDING FIELDS OF TABLE values_tab
    WHERE carrid = field_value-fieldvalue.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield    = 'CONNID'
            dynpprog    = progname
            dynpnr      = dynnum
            dynprofield = 'CONNECTION'
            value_org   = 'S'
       TABLES
            value_tab   = values_tab.
ENDMODULE.
you use this exaple code.
Plz Reward if Help,
Mahi.

Function Module for search help Exit

How to create a function Module for search help exits?
please explain in details with step by step process.

Hi,
How to create a function Module for search help exits?
function module for search help F4IF_SHLP_EXIT_EXAMPLE
dynamic search help use 'F4IF_INT_TABLE_VALUE_REQUEST'
please check out the link below it will help you
A repository object maintained in the ABAP Dictionary. It supplies input fields on Dynpros with single- or multi-column input helps. Search helps can be linked in the Dictionary with components from structures, data elements, and check tables. A search help enables you to search for entry values with assigned data, without you having to know the exact spelling of the value.
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
please explain in details with step by step process.
create a search help exit:
1. create an fm with this interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR_T
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
put this logic in it:
Delete duplicate filter logic.
This logic only needs to apply at the 'DISP' event - which is just
before the hit list is displayed
if callcontrol-step = 'DISP'.
delete adjacent duplicates from record_tab.
endif.
2. edit your search help in se11 and enter the name of the above search help exit fm
check this sample code..for dynamic search help
REPORT ZTEST_F4HELP                              .
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
            p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
          posnr type vbap-posnr,
          matnr type vbap-matnr,
          arktx type vbap-arktx,
        end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
       exporting
            dyname               = sy-cprog
            dynumb               = sy-dynnr
            translate_to_upper   = 'X'
       tables
            dynpfields           = dynfields
       exceptions
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            invalid_parameter    = 7
            undefind_error       = 8
            double_conversion    = 9
            stepl_not_found      = 10
            others               = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
       exporting
            input = p_vbeln
       importing
            output = p_vbeln.
select posnr matnr arktx into table help_item
                 from vbap
                      where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'POSNR'
            dynprofield = 'P_POSNR'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = help_item.
also check this link it will help you
/message/3854825#3854825 [original link is broken]
*********please reward points if the information is helpful to you*************

Function module for fiscal year

Hi all,
can you please suggest me the function module for automatic generation of fiscal year.
Thanks and regards,
S.Latha.

Hi Latha,
Please find below the code for auto generation of the fiscal year.
l_date = sy-datum.       "l_date should declared of type sy-datum
Use the function module to get the period
      CALL FUNCTION 'MC_PERIODE_ZUM_DATUM'
           EXPORTING
                idate        = l_date
                iperkz      = l_p         " 'P'
                iperiv       = l_periv   "V6
           IMPORTING
                eperid       = l_period
           EXCEPTIONS
                wrong_period = 1
                OTHERS       = 2.
l_fiscal = l_period+0(4).
l_p - 'P'   i. e. Is the period indicator (Period according to fiscal year variant)
l_periv - 'V6' i.e. Is the Fiscal year variant. Here it is V6 which relates country 'US'.
l_period - gives you the Fiscal period.
l_fiscal - The first four digits of l_period gives you the 'Fiscal year'.
Hope this helps you !.
Thanks & Regards,
MM Jaffer.
Edited by: MohammedJaffer on Aug 10, 2010 12:53 PM

BAPI Function module for transaction ME32K for change

Please let me know the name of the BAPI Function module for transaction ME32K for change the contract.

Hi Krishan,
I have checked but their is no BAPI called
BAPI_CONTRACT_CHANGE.
If I am wrong plz correct me with the procedure to view the above BAPI in SAP System.
Regards,
Nitin

Call Function not Generating Function Module for Smartform

Hi Gurus,
We have a work copy print program use to print deliveries (smartforms). This program works fine in Production but right now we are doing some testing and I found out that when we run this program in QUALITY environtment, it shortdumps with error saying "Function Module Not Found"
Basically when it gets to the Function Module "SSF_FUNCTION_MODULE_NAME", it could not generate any function module for the form it Sy-Subrc = 2 Exception meaning NO_FUNCTION_MODULE.
The problem is this only happens in our QUALITY environment.I compare the function module in the 2 systems, there was not diff as this is a Standard SAP module. I passed diff smartforms we have in QUALITY through the FM and it will not generating any FM for any of them. So this is not an error from the smartforms, bcos all the same smartforms generates FM in Prod.
So what I did next is to Debug the FM "SSF_FUNCTION_MODULE_NAME" in the 2 systems to see where the diff is coming from. I noticed 2 views that the FM is using, they are STXFADM and D010SINF . So on the Production system, STXFADM-LASTDATE and D010SINF-UDAT fields are the same value, so it generates the FM. On the QUALITY systems, the values are different hence it skips the code to generate the FM.
Thanks Guys.
Points will greatly be awarded for this.

Please guys, help me look into this, I really need a solution fast.
Thanks

Custom Function Module for the New Process Codes

I want to distribute the custom table data . For that i have written the program using MASTER_IDOC_DISTRIBUTE. I have created the custom message & idoc types along with their assignments.
I got struck up at the process code. I have to assign the function module for that process code. Can anyone kindly help me in writting the code at that function module ?

Hi Friends,
My requirement is , i need to transfer the table records. For that i have created the Message/Idoc Types and also created the Partner profile and the Distribution model view .....all alll i have done.
My doubt is , in the we20, at the outbound parameters , i can give the Message/Idoc types that i have created. Ok thats fine
But at the inbound parameters, i have to give the inbound process code. So i have created the Inbound process code. As we know that for every process code a function module is attached, now i have to create the function module which posts the records in receiver side.
so 1. Does the Function module need to be RFC Enabled ?
2. Do we need to create Object type in SWO1 once i
create and release the function module ?

Function Module for Equipment Details

HI,
Please tell me the functional module for Equipment details.
i want to get the details for generator details
Engine
Alternator
SIS
Serial NO
through passing the Equipment Number.
Regards
Surya

thank you,
This functon module will be giveing all the details but more then this i need for a particular equipment number i want to get the calss overview, details in class over view i need
Charecteristic Discription
value.
Regards
Surya

Functional module for automatic creation of pur requisition & pur order

hello,
what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
please let me know as early as possible
regards,
rajesh kumar raju

Hi,
Please check with following.
IDOC_INPUT_ACC_PURCHASE_REQUI
IDOC_INPUT_ACC_PURCHASE_ORDER
/ISDFPS/OR_PURCHASE_ORDER_CR
BS01_PURCHASE_DOCUMENT_CREATE
CO_MP_CREATE_PURCHASE_ORDER
Thanks & Regards
Sadhu Kishore

Function module for calculating planned and actual cost of production order

Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
Srini

Hi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran

How to create the INBOUND Function Module for INBOUND IDOCs

Hi Friends,
Can any Suggest me How to proceed to Create an INBOUND Function Module for Processing the INBOUND IDOCS
which are recieved from XI Server ?
I am working in SAP-ISU
Here i will recieve the INBOUND IDOCs for the Meter Reading Orders.
We have a Standard INBOUND FUNCTION MODULE
IDOC_INPUT_ISU_MR_UPLOAD
which Uploads the Meter Reading Results.
I copied the Same function Module into ZIDOC_INPUT_
and working on it.
Can any one suggest me, whether i am going in correct way or not.
In IDOC_INPUT_ISU_MR_UPLOAD Inbound fun module,
BAPI_MTRREADDOC_UPLOAD is used to Update or Insert the Meter Reading Results,
My requirment is to Insert and Update the Meter Reading Orders which are Inbounded from XI.
Can I Use the Same BAPI
BAPI_MTRREADDOC_UPLOAD
to Update the below fields,
EABL-SERNR
EABL-ZWNUMMER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS
EABL-ADATTATS
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Kindly Suggest me,
Thanks in Advance,
Ganesh

Hello Ganesh
I think you are going completely astray with you z-function module for IDoc processing.
If you look at TABLES parameter METERREADINGRESULTS (type BAPIEABLU ) of BAPI_MTRREADDOC_UPLOAD you will find many of the requested fields already:
EABL-SERNR => BAPIEABLU-SERIALNO
EABL-ZWNUMMER =>REGISTER
EABLG-ABLESGR
EABL-V_ZWSTAND
EABL-N_ZWSTAND
EABL-ABLHINW
EABL-ZSKIPC
EABL-ADAT
EABL-ATIMTATS => ACTUALMRTIME
EABL-ADATTATS => ACTUALMRDATE
EABL-ATIM
EABL-ZMESSAGE
EABL-ABLESER(Meter reader number)
Field EABL-ZMESSAGE appears to be custom field (at least I cannot find it on ECC 6.0). If this field was added using include CI_EABL then you probably can get these values into the BAPI using the EXTENSIONIN parameter.
Check routine CHECK_UPLOADRECORDS in the BAPI which allows two extension structures:
- BAPI_TE_EABL
- BAPI_TE_EOSB
Not surprisingly BAPI_TE_EABL contains the include CI_EABL.
Regards
Uwe

How to config Check Digits function module for Student Number Validation

Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.

Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi

Function Module for FB01 Vendor line items postings in 3.1 Version

Hello all,
Is there any Function Module for FB01 Vendor line items postings in 3.1 Version. I do not want to go for BDC. Please suggest.
Thanks,
Subba

Hi,
search for function module ACCPOSTING* or get development class of transaction FB01 and goto SE80, enter development class - and search in function group's function module.
Cheers.
...Reward if useful.

Function module for dynamic view generation

Similar Messages

Maybe you are looking for