Function module to find start date and end date of fiscal year for company
Hi,
Is there any function module exist which will provide me start date and end date of fiscal year for company code and fiscal year provided?
Thanks & Regards,
Parag
Hi,
please check this link
it would be very useful
http://www.sapdevelopment.co.uk/fmodules/fms_fiscalyr.htm
Thanks and regards
durga.K
Similar Messages
-
Function Module for calculating NEXT MONTH's start date and End date
Hi Friends,
I want a function module which could calculate the next months start date and end date...
Say my input will be like 01.01.2006(start date) it should return
01.02.2006 and 28.02.2006...
IS there any FM for this ... or how to go about this scenario ???
thanks in advance
Cheers,
R.KripaHi kripa,
1. There is no DIRECT Way.
2. We have to do in 2 steps.
3. See this code (just copy paste in new program)
U can use its FORM anywhere in your program,
for getting the desired dates.
4.
REPORT abc.
DATA : sdate TYPE sy-datum,
edate TYPE sy-datum.
PARAMETERS : dt TYPE sy-datum DEFAULT sy-datum.
PERFORM getdt USING dt sdate edate.
WRITE :/ sdate , edate.
INDEPENDENT FORM
FORM getdt USING orgdate stdate enddate.
DATA : mydate TYPE sy-datum.
CALL FUNCTION 'HR_PSD_DATES_ADD_MONTHS'
EXPORTING
v_date = orgdate
V_MONTHS = 1
IMPORTING
E_DATE = mydate
EXCEPTIONS
NOT_POSITIVE = 1
OTHERS = 2
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
EXPORTING
iv_date = mydate
IMPORTING
ev_month_begin_date = stdate
ev_month_end_date = enddate.
ENDFORM. "getdt
regards,
amit m. -
How to display absence start date and end date in workflow notification?
Hi,
I would like to display the absence start date and end date at
1) Subject of workflow email notification/worklist notification OR/AND
2) Content of workflow email notification/worklist notification.
Appreciate if anyone can advise on this as this information is very crucial to our client.
Thank you.
Regards,
Shiau Chin, Teo1) Subject of workflow email notification/worklist notification OR/ANDyou have to customize the subject of notification message. You can find the message using following query.
SELECT message_type, message_name
FROM wf_notifications notif
where notification_id = <your notification>;> 2) Content of workflow email notification/worklist notification.
its already there I think. -
Org.Assignment Infotype start date and End date is getting wrong.
Hi, When i create a new employee in PA40, in Org. Assignment infotype start date and end date is getting wrong. for eg. When i create an employee on 01.04.2014. In org. assignment infotype its getting like this. 01.01.2014 to 31.03.9999 and 01.04.9999 to 31.12.9999 Two date entries are creating by default.
Hi
Check in the Table - T588Z : Dynamic Actions ,is there any custom routines causing the defaulting dates functionality.
Thanks,
Sreeram -
How to get starting date and ending date of the given Fiscal Period
Hi Friends,
In my Selection screen parameter, I've Fiscal year and Period , I want to get the starting date and ending date with the Fiscal period.
How to get and throught which FM.
Pls advise.
thanks®ards
Sankar.Hello Sankar,
Check the FM PERIOD_DAY_DETERMINE.
DATA :
l_periv TYPE periv,
l_blart TYPE blart,
l_fday TYPE bkpf-budat, "First day in period
l_lday TYPE bkpf-budat. "Last day in period
* Fetch the fiscal year variant from T001
SELECT SINGLE periv INTO TABLE l_periv
FROM t001
WHERE bukrs EQ p_bukrs.
* Get first day/last day
CALL FUNCTION 'PERIOD_DAY_DETERMINE'
EXPORTING
i_gjahr = p_gjahr
i_monat = p_monat
i_periv = l_periv
IMPORTING
e_fday = l_fday
e_lday = l_lday
EXCEPTIONS
error_period = 1
error_period_version = 2
firstday_not_defined = 3
period_not_defined = 4
year_invalid = 5
OTHERS = 6.
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Jan 9, 2009 2:08 PM -
Search on basis of start date and end date
Hi,
I have added two fields 'Start Date' and 'End Date' on a search page.
I have done the VO extension also.
Now, I have to implement search logic to get all the records created in between 'Start Date' and 'End Date' after pressing the 'GO' button on that page.
Can anyone please provide guidance to extend the controller.
Thanks in advance.
Gaurav.Hi Anil,
Thanks for ur reply.
As per the link, I have written following code in the controller :
package oracle.apps.irc.vacancy.webui;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;
public class xxVacancyCriteriaCO extends VacancyCriteriaCO
public xxVacancyCriteriaCO() {}
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
// Pressing the Go button causes the search to be executed.
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
OAViewObject oaviewobject = (OAViewObject)am.findViewObject("XXIrcVacancySearchCriteriaVO");
if (pageContext.getParameter("Go") != null)
String created = pageContext.getParameter("ViewDate");
oaviewobject.setWhereClauseParam(0, created);
oaviewobject.executeQuery();
OAAdvancedTableBean table = (OAAdvancedTableBean)webBean.findChildRecursive("ResultsTable");
table.queryData(pageContext, false);
But while compiling it, I am getting the error as :
"Error(14,42): PerTransactionTopCOImpl not found in class oracle.apps.irc.common.webui.IrcOAControllerImpl in class oracle.apps.irc.vacancy.webui.VacancyCriteriaCO in class oracle.apps.irc.vacancy.webui.xxVacancyCriteriaCO"
Can u please suggest where the mistake is?
Thanks again.
Gaurav.
Edited by: Gaurav on Jan 14, 2011 12:51 AM -
Modelling Time Dimension with Fact Table containing Start Date and End Date
Hi Gurus,
I have a time dimension with Year till Date. I have a fact table which consists of Start Date, End Date, Person ID, Department ID.
How do i design Time dimension with fact table the below scenario
In the dashboard i have start Month and End month as prompts.
In the report i need to display Count(Person ID) > Start Date and < End Date along the trend.
For instance, i have selected Jan-2009 as start date and Apr-2009 as End Date, then i need to display Count(Person ID) of Jan-2009, Feb2009, Mar-2009 andApr-2009.
I Can not connect Time dimension with only Start Date or only with End Date to get the trend along the months.
Please advice on the issue which i am having.Hi,
Thanks for the response, Infact i tried using Complex join in physical layer. I have considered Time table joined with Fact table, and used >= and took and alias of the Time table and joined fact table using <=. When coming to BMM, i am not knowing how do i design this as if i merge the both the time dimensiona and its alias into single table, values will not be correct and if i make them as seperate columns. i can not show the trend as both are different columns.
Can you please let know where i am going wrong.
Thanks -
How to create start date and end date
Hi guys
Need to create start date and end date as prompt in webi report.... how could it be possible please help me ...
regards@Universe:
Go to Condition/Filter:
Definition: Date=@Prompt("Select Start Date",D,,mono/multi,free/constrained,...)
OR @Select(Class\Object Date)=@Prompt("Select Start Date",D,,mono/multi,free/constrained,...)
Parse it & Apply OK.
Class/Object : If you have already object Date in any class already, use them.
Follow the same for End date also.
For both filters/prompts, check Apply on Universe
@Report/Query:
Drag [Date] object to Query filters section and in Operand say Prompt. Change text as Select Start Date & again drag [Date], this time say Select End Date.
Hope it helps you alot.
Gracias...!! -
Updating start date and end date at header level for a contract
As per the requirement I have to create a contract and assign the start date and end date to the contract.
I am using BAPI_CONTRACT_CREATEFROMDATA for creating a contract. I am assigning value for start date and end date for header data of contract in fields
-CT_VALID_F and CT_VALID_T of CONTRACT_HEADER_IN import parameter and also setting the corresponding indicator in CONTRACT_HEADER_INX parameter.
The BAPI executes successfully and does not return any error but when I check the start date and end date for contract in va43 the values are not assigned.
I also want to update the start date and end date for contract in other case for which I am using BAPI_CUSTOMERCONTRACT_CHANGE and passing date values to the same fields as those create but it give me an error while executing. The error is as follows:
Field 'GUEEN' cannot be changed, VBAKKOM 2000000162 ready for input.
Can anyone suggest what can be done for update the date values?
Thanks in advance.
KomalSo are we... The BAPI BAPI_CONTRACT_CREATE has the following importing parameters:
HEADER TYPE BAPIMEOUTHEADER
HEADERX TYPE BAPIMEOUTHEADERX
VENDOR_ADDRESS TYPE BAPIMEOUTADDRVENDOR
TESTRUN TYPE BAPIFLAG-BAPIFLAG
TECHNICAL_DATA TYPE BAPIMEOUTTECH
Change the HEADER and HEADERX parameters as I have indicated in my first post.
Regards,
John. -
BIAPPS how can we manually set both ETL start date and end date?
Dears experts,
how can we manually set both ETL start date and end date while conducting incremental load IN DAC?
Please advise me.
thanks,
Joe.You can set those dates in the DAC system parameters tab. You should see lots of $$xxxxxx parameters.
If I may, I'd suggest you use the OBI Applications forum for questions on DAC.
Antonio
BExpert, Brazil -
Function Module to Find Actual costs and Total Cost Commitments
Hi PS Experts ,
Please let me know if there is any function module to find Acutal costs and Total cost commitments by passing WBS element as Input .
Regards,
KaranHi Karan,
I think for actual cost - there is definately one FM availbale. Try to find it out.
Just ensure - if you are using Network Activity then you may have to pass NWA OBJNR into this FM to get actual cost. As some entry posting happens against NWA like Timesheet. Hope it will give you some idea to get rid on your issue. -
Hope someone can help. I have tried to find the best way to do this and can't seem to make sense of anything. I'm using an Access 2013 Database and I have a report that is based on a query. I've created a Report Criteria Form. I
need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date. I then need my report to return only the records that meet all selected criteria. It works fine with a ComboBox and 1 selection but can't
get it to work with a List Box so they can select multiple items. Any help is greatly appreciated while I still have hair left.The query should return all records.
Let's say you have the following controls on your report criteria form:
txtStart: text box, formatted as a date.
txtEnd: text box, formatted as a date.
lbxMulti: multi-select list box.
cmdOpenReport: command button used to open the report.
The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
The report to be opened is rptReport.
The On Click event procedure for the command button could look like this:
Private Sub cmdOpenReport_Click()
Dim strWhere As String
Dim strIn As String
Dim varItm As Variant
On Error GoTo ErrHandler
If Not IsNull(Me.txtStart) Then
strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
End If
If Not IsNull(Me.txtEnd) Then
strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
End If
For Each varItm In Me.lbxMulti.ItemsSelected
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
Next varItm
If strIn <> "" Then
' Remove initial comma
strIn = Mid(strIn, 2)
strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
End If
If strWhere <> "" Then
' Remove initial " AND "
strWhere = Mid(strWhere, 6)
End If
DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
Exit Sub
ErrHandler:
If Err = 2501 Then
' Report cancelled - ignore
Else
MsgBox Err.Description, vbExclamation
End If
End Sub
If SomeField is a text field instead of a number field, change the line
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
to
strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
To get first date and end date after entering any month and year
Hi,
I need to to get first date and end date of a month and year in yyyyMMdd format. I am reading month and year from a properties file. But I don't know how to get the first date and End date in given format. The properties file gives me just text. But I don't know how to get the date format using this. I need this urgently. Can anyone help me to get code for this?
I am reading the fields as,
Properties props = new Properties();
props.load(new FileInputStream("AnyMonthVolume.properties"));
String date_month = props.getProperty("date_month");
String date_year = props.getProperty("date_year");
Thanks.I know this has been posted a while ago but incase someone looking for it, here is the code to get the end of current month date.
Calendar cal = Calendar.getInstance();
cal.setTime(new java.util.Date());
cal.set(Calendar.DATE, 1); //set the date to start of month
cal.add(Calendar.MONTH,1);
cal.add(Calendar.DATE,-1);
System.out.println(cal.getTime()); -
Infotype for Employee begin date and end date
Hi Friends,
Could any one tell me the infotype and fields for getting employee joining date and end date.
Regards,
Susmita.Infotype 41 (Date Specifications) should have all dates.
Infotype 2...i.e. PA0002 BEGDA & ENDDA may not have actual start and end date depending on how your company maintains it.
In Infotype 41 (table PA0041)...get either BEGDA & ENDDA or get correct date based on qualifier DAR01-DAR12.
Thanks,
Pushpinder Randhawa -
Function Module for getting Payroll start date and end date
Hi Gurus,
If I give one date then is there any function module to find the payroll period start date and enddate for that given date?
Points will be awarded
Thanks
RaviHi,
Try these FMs
HR_PAYROLL_PERIODS_GET
HR_BEN_PAY_GET_PAYROLL_PERIODS
HR_PAYROLL_PERIOD_GET
HR_P06I_GET_PAYROLL_PERIOD
Regards,
PRashant
Maybe you are looking for
-
Password for base unit asked at start-up??
Hello, I have just purchased an Airport Extreme and followed the instructions by installing the CD first and then connected the Airport Extreme. I use the Airport Utility to do the set-up but when I select continue it asks me for the base unit's pass
-
Integration with JBoss and OpenLDAP
Hello All Please bear with me as I try to pose my questions as clearly as possible given that I'm new to JDeveloper and ADF. I have a client who is looking to develop an application that will be used to monitor and maintain batch processes for a thir
-
Use java thread? or Oracle DB scheduler?
I have a java thread which purge records in a table every 30 seconds. The thread calls a prepared statement which is like "delete from MyTable where status=99" can I use DB's scheduled job to do the same thing? I can create a DB schedule, and a job i
-
Deploying application in domain failed
Hi, I'm trying to deploy my first JSP Web Component using the Deployment Tool. It creates the WAR file but I get the message Unknown deployable object type specified, the file origin to deploy does not exist. In the first page of the wizard I select
-
I can't purchase anything - I keep getting an error 11111
This has been happening all week. I have 30 dollars in my account, so it can't be because I have no money. I click on "buy" and it says "an unknown error occured(1111)There was an error in the itunes store. Try again later" I'm getting really angry r