Function Module to get Active Serial Numbers of Material Stock
Hi Experts,
Do we have any function module to get all the active serial numbers of Material Stock? Or any suggestions on how to get these through SQL Queries?
Thanks a lot for your help!
GET_SERNOS_OF_DOCUMENT
Similar Messages
-
Function Module Not Getting Activated
Hi,
We are using a customised function module which we are calling in a user exit. We would like to call this function module in update task in the user exit to populate data in a custom table.
We have given the following parameters to the function module
Import Parameters
ITAB LIKE ZPRUNDAT
Export Parameters
l_subrc TYPE sy-subrc
On the attributes tab of the function module, Update Module has been selected under processing type.
When we try to activate this function module we get the following message
EXPORTING parameters are not allowed in the update task.
and the function module does not get activated. What should we change to get the function module activated?
MickHi,
Please try this....
In function module
In tables Section add this...
RETURN TYPE BAPIRET2 and then activate.
if its useful reward points -
Function module to get the sequence numbers based on PERNR & payroll period
Hi,
Right now i am using the function module 'CU_READ_RGDIR' to get the sequence number based on the PERNR. Once i get the data i am filtering based on payroll periods (begin date and end date). Is there any function module to get the sequence number directly based on PERNR and payroll period dates? if so could you let me know.
Thanks
SatyaI think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = p0001-pernr
TABLES
in_rgdir = it_rgdir
EXCEPTIONS
no_record_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
AND paydt <= v_endda AND
void IS INITIAL
AND ocrsn IS INITIAL
AND srtza = 'A'.
v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran -
BAPI function module to get process orders for certain material
Dear experts ,
kindly , I need my vb application to get all CRD , but not DLV Process orders for Material X.
Into SAP , I use the COIO , then set material to X , then display flag CRTD included , and Exclude DLV.
Question now , What is the function module that does this. what is the table name , and how to set search parameters.
my code will be like this
theFunc = functionCtrl.Add("BAPI_PO_GETDETAIL") ' get po data
theFunc.exports("purchaseorder") = t.Text
returnFunc = theFunc.call
returnParam = theFunc.imports("po_header")
retTab = theFunc.tables("po_items")
For Each rr In retTab.Rows
tt1.Text &= (rr("MATERIAL")) & vbTab
next
Thanks
WaleedHi,
Check if the below helps:
1. BAPI_SALESORDER_GETLIST for VA05
2. BAPI_QUOTATION_GETDETAILBOS for VA25.
Regards,
Vivek -
Function module to get Conditions based on Customer & Material
Hi,
Is there any function module such that the list of conditions are displayed, based on Customer & Material given?
Thnx in advance,
Shivaa.....actualy Jan this report is based on GL account no..GL acount no.s dat we required are not there in bsid n bsad...we need bank related GL account no..IN BSID n BSAD all GL account no. are customer GL account no.s...
-
Program or function module to get active Batch jobs
Hi Experts,
I need a program or a FM that would give me the list of active batch jobs and also the time they were running
for.
Plz help me outYou Just follow the below code, It is exactly same as your requirement.
TYPES: BEGIN OF ty_itbl,
jobname TYPE tbtcp-jobname,
jobcount TYPE tbtcp-jobcount,
stepcount TYPE i,"tbtcp-stepcount,
sdldate TYPE tbtcp-sdldate,
sdltime TYPE tbtcp-sdltime,
sdluname TYPE tbtcp-sdluname,
status TYPE tbtco-status,
END OF ty_itbl.
DATA : wt_itbl TYPE TABLE OF ty_itbl,
wa_itbl TYPE ty_itbl.
SELECT a~jobname
a~jobcount
a~stepcount
a~sdldate
a~sdltime
a~sdluname
b~status
INTO CORRESPONDING FIELDS OF TABLE wt_itbl
FROM tbtcp AS a
INNER JOIN tbtco AS b
ON b~jobname EQ a~jobname
AND b~jobcount EQ a~jobcount
WHERE a~progname IN wp_prog
AND a~sdldate IN wp_date
AND b~status eq <STATUS>. "<-Give the Active Status here -
Function module to get list from CDHDR for MATERIAL
Hello,
I am searching for the function to get a list of CDHDR-entries for a material in transaction MM03.
My debugging was not successful. So I hope someone here has the answer.
What is the name of the function that SAP uses in TA MM02/MM03 to get the list of CDHDR-entries for a material number and from where (include) is it called?
I found already the function to get the related CDPOS entries, starting from the list with CDHDR entries in the transaction.
This is CHANGEDOCUMENT_READ_POSITIONS.
But here I am definitely too late, because I am searching for the reasn why one of my changes entered in CDHDR is not selected!
Thank you in advance for the answer!
Best regards
DirkHello Suhas,
yeah, I used MM04 from your answer and found the same!
Thank you! This will help me!
It is PERFORM relevanz_pruefen
called after the FM which kills some of my entries.
Now I can find a solution for my issue!
Best regards
Dirk -
Function module to get md04 data
I need function module to get below data of the material as per the mrp area.
Thanks,
KiranHello Kiran and Kumar
As I have explained in the following thread, BAPI_MATERIAL_STOCK_REQ_LIST should be used instead of MD_STOCK_REQUIREMENTS_LIST_API.
Material shortage report after mrp run.
BR
Caetano -
Any function module for getting fiscal year week numbers
can any one provide me function module for getting fiscal year week numbers ? if no function module please let me know work around.
Thanks!
Lakshmikandhhi,
Use FM <b>'DATE_GET_WEEK'</b>...
parameter D1 LIKE SCAL-DATE.
Data w like scal-week.
CALL FUNCTION <b>'DATE_GET_WEEK'</b>
EXPORTING
date = D1
IMPORTING
WEEK = W
EXCEPTIONS
DATE_INVALID = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write W+4(2).
Regards,
Santosh -
Standard FM to get the Serial Numbers associated with the PO
Hi,
I'm using the Standard FM "BAPI_PO_GETDETAIL1" to get the details of the PO which I have created. The FM is returning the details such as PO HISTORY, POITEM, POHEADER etc. I want the serial numbers associated with the PO.
Please help me to get the serial numbers which are issued to the PO since the material assigned to the PO is serialised material. Another Standard FM "BAPI_PO_GETDETAIL" also I have tried but there is no serial number collection in that FM.
Thanks in Advance,
Mohan.These function modules will not return you the serial number. May be you can use following logic.
You can use table ser03 where in you wll input material document number and find out obknr. Pass this obknr to objk table and find out seril number.
And to find the material document number for the relevant purchase order number you can use table EKBE.
So for EKBe-BEWTYP= E and EBELN= purchase order find EKBE-MBLNR(belnr).
The material document number and year found above pass it to SER03-MBLNR and SEr03-mjahr and find SEr03-obknr.
The obknr number found above pass it to OBJK and find serila numbers..
Regards
Sangeeta -
How to get the serial Numbers issued for an STO
Hi,
I created my own STO and mapped a serialised material for the same using transaction. I increased the stock by issuing serial numbers. The /SYCLO/MM_DOPURCHASEORDER_GET BAPI returns the PO header, item and longtext details. I want the serial numbers which are issued to the STO and the list of serial numbers for which the receipts has been done.
I want to know how to get the serial numbers which are issued to the STO throught the standard function module. I want only the issued serial numbers not the one for which the receipts has been done.
I tried using the standard BAPI, "BAPI_PO_GETDETAIL1" to get the serial number collection. But the FM is not returning the issued serial number as well as the list of serial numbers for which the receipts has been done. It is returning only the PO history in which the list of document number are present.
Thanks in Advance,
Mohan.Hi,
Using the transaction "MB1C" and movement type "561", I filled the required details such as Material Number, Quantity, Storage Location and Batch. After filling all these details, when I press enter, it will ask for me to enter the serial numbers equal to the quantity specified. I entered the serial numbers by selecting the available serial numbers for that particular material by pressing F4 help.
Please let me know if you need any more inputs in this regards.
Thanks,
Mohan. -
Function module to get the configuration of Individual objects
Hi all,
Is there is any std function module to get the data of individual object configuration.
In table COM_TA_R3_ID, I can able to get the PRODUCT_GUID (for material and serial number) and I dont know how to get the configuration of the product by using the PRODUCT_GUID.
Pl through some light on this.
Regards
A.Sureshbabu.Hi,
You can get the item configuration using FM CRM_CONFIG_READ_OW.
This is used to read the product configurations for IPC calls.
Just pass the configured item guid and it will return the configuration data.
Use FM CRM_PRODUCT_I_READ_OW to get the product configurations but this FM checks whether any item has this product guid.
Regards,
Arun Kumar
Edited by: Arun Kumar on May 12, 2010 10:20 AM -
Function module to get components
Hi,
Anyone knows of a function module that gets the components attached to an activity?Hi Jackie,
Please consider BAPI_NETWORK_COMP_GETDETAIL and BAPI_NETWORK_GETDETAIL
Thanks
Martina -
Function module for getting Vendor Address details
Hi,
Im new to this group,and new to ABAP
plz hep me out by solving ABAP Query...
i want to generate a report for getting Vendor Details
like Vendor address,Ph num and Email
input fields are Company code,country key and Account Group.
im Using Smart Forms for this..
but im not getting the Exact Function module to get All Required Details..
regards
Smithathanks for ur quick reply...
SELECT SINGLE LIFNR
FROM LFB1
INTO V_LIFNR
WHERE BUKRS EQ V_BUKRS.
CALL FUNCTION 'VENDOR_READ'
EXPORTING
i_bukrs = V_BUKRS
i_lifnr = V_LIFNR
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this is the code i have written...
but my problem is there no table in the Function module....
for Example...
CALL FUNCTION 'QPAX_PLMKB_READ_FROM_PLKO'
EXPORTING
i_plnty = 'Q'
i_plnnr = V_PLNNR
I_PLNAL = V_PLNAL
i_sttag = V_DATUV
TABLES
T_PLMKB_TAB = IT_TAB
i want the function modules with tables and proper input... -
Function module for getting the open qty
HI experts,
I have a PO quantity(EKPO_MENGE).against same PO and item item(EBELN and EBELP) if Goods receipt has happened (MSEG_ERFMG) then i need to calculate the open qty.and also by netting the open quantity if multiple GRs has done against the same PO and item.
Can you suggest any function module to get this open PO quantity.Hello,
Hope this link can help you.
[Po Open Quantity;
Thanks
Jayant
Maybe you are looking for
-
Spinning beach ball yet again, in safari! need help to decipher error message
Hi all. The SBBOD is happening again and this time it's more often when im using safari. Here's the error message when i managed to "force quit" it. Date/Time: 2011-06-02 14:25:00 +0800 OS Version: 10.6.7 (Build 10J869) Architecture: x8
-
Before reaching the high unit, 'End of file reached' error pops up.
Following is the <distributed-scheme> of my cache server. <distributed-scheme> <scheme-name>dom-dist</scheme-name> <service-name>DOM-CACHE</service-name> <backup-count>1</backup-count> <backing-map-scheme> <overflow-scheme> <scheme-name>dom-overflow<
-
Payment terms can not be loaded to crm from ECC
dear expert, i have added three new payment terms in ECC and i need to load them to CRM. I tried intial load object DNL_CUST_Price, and also tried request load. When i monitored the object/request, there is a green light. however, when i go to IMG i
-
Sync settings with Creative Cloud
Sooo .... I drank the cool aid and subscribed to CC - If anything just to look at how it works and how it helps ME. I have been a PS user since 2006 and while I'm not a professional artist I am a very keen photographer. Additionally, I can still pull
-
I get garbled text on web pages using yahoo with Safari 7.0.5
I get garbled text on web pages using yahoo with Safari 7.0.5 and have Maverick 10.9.4.