Function Module to get the data like in LS26
Hi Gurus,
We are designing a new program and we need to get information about the "available stock", "putaway stock" and "pick quantity" for some storage types. So this is exactly what the LS26 shows.
Do you know any Function Module that can extract or calculate this information?
I would really appreciate any suggestion.
Thank you in advance
Edited by: Abel Raya on Jul 4, 2011 11:39 AM
I don't think there is a function module exists. But you can get the details from table LQUA for item details and LEIN for header records.
Similar Messages
-
Function module to get the dates from the year and the period
Is there a function Module to get the dates from the year and the period
Check with :
To get last day of period use .
LAST_DAY_IN_PERIOD_GET.
To get last of month Use :
RE_LAST_DAY_OF_MONTH
HRVE_LAST_DAY_OF_MONTH
LAST_DAY_OF_MONTHS
ISB_PREVIOUS_PERIOD_DATE_GET
Thanks
Seshu -
Is there any function module to get the data from st06?
Hi,
I'm new to this forum.
I would like to know if there is a way (maybe some function modules) to collect information like system architecture, and databases as displayed in transaction st06?
I would like to call it from external program in order to view part of the data available in st06.
Thanks,
Erez Gordon.have a look at function group SMON.
Not sure if these are remote enabled, otherwise create a wrapper function module (RFC).
Edited by: Micky Oestreich on Dec 11, 2008 9:37 AM -
Function module to get the configuration of Individual objects
Hi all,
Is there is any std function module to get the data of individual object configuration.
In table COM_TA_R3_ID, I can able to get the PRODUCT_GUID (for material and serial number) and I dont know how to get the configuration of the product by using the PRODUCT_GUID.
Pl through some light on this.
Regards
A.Sureshbabu.Hi,
You can get the item configuration using FM CRM_CONFIG_READ_OW.
This is used to read the product configurations for IPC calls.
Just pass the configured item guid and it will return the configuration data.
Use FM CRM_PRODUCT_I_READ_OW to get the product configurations but this FM checks whether any item has this product guid.
Regards,
Arun Kumar
Edited by: Arun Kumar on May 12, 2010 10:20 AM -
Function module to get the difference of dates ..
Hi ,
Can somebody pls help me with the function module to get the difference between two dates?
I need to find the difference value and delete records if >1.
Thanks in advance.
Regds,
Leeza.Leeza,
When I tested the FM in my Program, it is <b>working</b>!!!!!
Note that the Two Input Dates are to be in the format of <b>DATS</b> type (Eg: <b>vimimv-dmibeg</b>).
U can want the Day which u have specified in the parameter I_DATUM_BIS (eg: 20050101) to be included for
the calculation , then put X in the parameter I_KZ_INCL_BIS.
Sample Code :
report zkam01.
data:
<b>sav_nlaufz like rf60v-nlaufz,
date1 type vimimv-dmibeg,
date2 type vimimv-dmiend.</b>
date1 = '20050101'.
date2 = '20051001'.
call function 'MONTHS_BETWEEN_TWO_DATES'
exporting
i_datum_von = date1
i_datum_bis = date2
i_kz_incl_bis = 'X'
importing
e_monate = sav_nlaufz.
write:
date1,
/ date2,
/ sav_nlaufz.
Please allot points if the problem is solved.
Thanks
Kam
Message was edited by: Kam -
Function module to get the posting period based on date
Hi to all,
Is there any function module to get the posting period based on date?
Regards,
Nageshhi,
CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
EXPORTING
I_GJAHR = GV_GJHAR
I_PERIV = GC_24
I_POPER = GV_POPER
IMPORTING
E_DATE = S_FKDAT-LOW
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
EXPORTING
I_GJAHR = GV_GJHAR
I_PERIV = GC_24
I_POPER = GV_POPER
IMPORTING
E_DATE = S_FKDAT-HIGH
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ags. -
Function Module to get the TIMESTAMP
Hi,
Is there any function module to get the TIMESTAMP as Outout , if i give input Time and Date.
Or,
If I go for the concatenate statement.. Do I need to concate the commas in to the target field?
Because,
I am not getting the proper result with this concatenate statement where I concatenated the YYYYMMDDHHMMSS in to the DECIMAL 15 Variable.
Thanks,
Naveen Inuganti.Hi use
IB_CONVERT_INTO_TIMESTAMP' or IB_CONVERT_FROM_TIMESTAMP'
Example:
* Declaring the work variables.......................
DATA :
timestamp like TZONREF-TSTAMPS,
time like sy-uzeit,
date like sy-datum.
* The following function module is used to convert the
* time and date into GMT timestamp
CALL FUNCTION 'IB_CONVERT_INTO_TIMESTAMP'
EXPORTING
i_datlo = sy-datum
i_timlo = sy-uzeit
I_TZONE = 'INDIA'
IMPORTING
E_TIMESTAMP = timestamp.
* The following function module is used to convert the
* above obtained timestamp to PST time zone date and time.
CALL FUNCTION 'IB_CONVERT_FROM_TIMESTAMP'
EXPORTING
i_timestamp = timestamp
I_TZONE = 'PST'
IMPORTING
E_DATLO = date
E_TIMLO = time.
write :/ 'Date and Time at PST zone is ',date, time. -
Function module to get the sequence numbers based on PERNR & payroll period
Hi,
Right now i am using the function module 'CU_READ_RGDIR' to get the sequence number based on the PERNR. Once i get the data i am filtering based on payroll periods (begin date and end date). Is there any function module to get the sequence number directly based on PERNR and payroll period dates? if so could you let me know.
Thanks
SatyaI think thats the only way
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = p0001-pernr
TABLES
in_rgdir = it_rgdir
EXCEPTIONS
no_record_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
check whether "Pay date for payroll result" with in Start Date and
End date, and "Reason for Off-Cycle Payroll" is initial
LOOP AT it_rgdir WHERE paydt >= v_begda
AND paydt <= v_endda AND
void IS INITIAL
AND ocrsn IS INITIAL
AND srtza = 'A'.
v_seqnr = it_rgdir-seqnr.
ENDLOOP.
Hope this helps.
Thanks
Kiran -
Is there any function module to convert the date format
Dear ABAPers,
Is there any function module to convert the date format from dd.mm.yyyy to dd-mmm-yyyy.
I want to convert the date format from dd.mm.yyy to dd.mmm.yyy Eg.from 10.03.2008 to 10-mar-2009.
Thanks & Regards,
Ashok.hi,
create custom function module or copy the below code in the report ..and use it
the out put for below is :----Convert a DATE field into a full format date eg. March 23, 2000
FUNCTION Z_CONVERT_DATE_INTO_FULL_DATE.
""Local interface:
*" IMPORTING
*" VALUE(DATE) LIKE SY-DATUM
*" EXPORTING
*" VALUE(FORMATTED_DATE)
*" EXCEPTIONS
*" INVALID_DATE
TABLES: TTDTG.
DATA: BEGIN OF T_DATE,
YYYY(4) TYPE C,
MM(2) TYPE C,
DD(2) TYPE C,
END OF T_DATE.
DATA: DAY(3) TYPE N.
DATA: VARNAME LIKE TTDTG-VARNAME.
IF DATE IS INITIAL.
CLEAR FORMATTED_DATE.
EXIT.
ENDIF.
check document date format
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
DATE = DATE
EXCEPTIONS
PLAUSIBILITY_CHECK_FAILED = 1.
IF SY-SUBRC NE 0.
RAISE INVALID_DATE.
ENDIF.
MOVE DATE TO T_DATE.
CONCATENATE '%%SAPSCRIPT_MMM_' T_DATE-MM INTO VARNAME.
SELECT SINGLE * FROM TTDTG WHERE SPRAS = 'EN' AND VARNAME = VARNAME.
WRITE T_DATE-DD TO DAY.
CONCATENATE DAY ',' INTO DAY.
CONCATENATE TTDTG-VARVALUE DAY T_DATE-YYYY INTO FORMATTED_DATE
SEPARATED BY SPACE.
ENDFUNCTION.
the output is :--Convert a DATE field into a full format date eg. March 23, 2000
Regards,
Prabhudas -
Function Module to get Last date of previous year
Is there any function module to get the Last date of the previous year. e.g, if i give date as 03/02/2009 the output should be 31/12/2008.
pls use below 2 FM's
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -1
olddate = curent_date
IMPORTING
newdate = w_prevdate.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
day_in = w_prevdate
IMPORTING
last_day_of_month = w_lastdayprevmonth
EXCEPTIONS
day_in_no_date = 1
OTHERS = 2. -
Function module to change the date format
hi guys
is there any function module to change the date format
from 08/28/2007(mm/dd/yyyy)
to August 28, 2007.
regards
vamsihi vamsi.,
Use CONVERSION_EXIT_SDATE_OUTPUT to get the month name,
but it will give short form of the month name.
if you want <b>long description of the month</b>,
use this peice of code.
PARAMETERS: V_DATUM(07) TYPE C. "(example input:12-2007)
DATA: V_MON(2) TYPE C,
V_YEAR(4) TYPE C,
V_MONTHNAME(10) TYPE C,
V_FULLDATE(30) type c.
WRITE V_DATUM+0(2) TO V_MON.
SELECT SINGLE LTX FROM T247 INTO V_MONTHNAME
WHERE SPRAS = SY-LANGU
AND MNR = V_MON.
CONCATENATE V_MONTHNAME v_datum+3(4)
INTO V_FULLDATE SEPARATED BY SPACE. "(example output : December 2007)
write: v_fulldate.
<i><b>Reawrd points if useful</b></i>
Chandra -
Function module to get the wbs element by entering Assignment No.
Is there any Function module to get the wbs element by entering Assignment No.???????
Thanks and regards
Manish Thakurhi Manish,
Just look at this function module.
function wbs_assignment_check.
""Lokale Schnittstelle:
*" IMPORTING
*" REFERENCE(I_COMPONENT) LIKE RESBDGET STRUCTURE RESBDGET
*" REFERENCE(I_PSPEL) LIKE RESB-PSPEL
*" REFERENCE(I_RFPNT) LIKE AFVC-RFPNT
*" EXPORTING
*" REFERENCE(E_PSPEL) LIKE RESB-PSPEL
e_pspel = i_pspel.
endfunction.
hope this helps u
REWARD IF USEFUL
thanks and regards
suma sailaja -
Function module to get md04 data
I need function module to get below data of the material as per the mrp area.
Thanks,
KiranHello Kiran and Kumar
As I have explained in the following thread, BAPI_MATERIAL_STOCK_REQ_LIST should be used instead of MD_STOCK_REQUIREMENTS_LIST_API.
Material shortage report after mrp run.
BR
Caetano -
Function module to get the BOM details for a material-plant combination
hi
Is there any function module to get the BOM details such as
BOM Usage -STLAN
Alternative BOM -STLAL
Items -POSNR
Required Quantity-EMENG
Resulting Quantity-MENGE
Unit of measure -BMEIN
Base unit of measure-MEINS
for a given material-plant combination
if so please suggest me some FMs.................
Awaiting for ur reply..............try the below fm it may be useful for you
DATA : BEGIN OF I_BOM OCCURS 0.
INCLUDE STRUCTURE STPOX.
DATA : END OF I_BOM.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
CAPID = 'PP01'
DATUV = SY-DATUM
MEHRS = 'X'
MTNRV = P_MATNR
WERKS = P_WERKS
TABLES
STB = I_BOM
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
just befor use it check your application area.for my case it is PP01. you can find it in CS12 when you are exploding the bom the value you are giving in BOM application that is the value for CAPID.
Just go to se37 and checkout the fm it has lot of options here I am using the minimum things.
regards
shiba dutta -
Function Module to get the Screen
Hello All,
Can anybody provide me a Function Module to get the Screen by giving Program Name and Screen Number.
Thanks,Hello
check FM RS_IMPORT_DYNPRO
CALL FUNCTION 'RS_IMPORT_DYNPRO'
EXPORTING
dylang = pmlang
dyname = programname
dynumb = screen
IMPORTING
header = header
TABLES
ftab = ifields
pltab = iflowlogic.
or you have to create join b/w table reposrc and tadir .
Thanks
Anirudh
Maybe you are looking for
-
Snow leopard doesnt prompt me for my admin password... why
if i go to change something that requires me to "click the lock to make changes" or something along those lines (user account options, software update, etc.) it should as me for privelages, and i usually grant them, but as of a week ago that prompt +
-
Automatic financial postings from MIGO
Hi Gurus, While automatic financial posting from MIGO/MIRO, the tax accounts (VAT on INPUTS or excise) did not post in Financial accounts as Business area is not found in automatic configurations. Will some one please help me to find where in configu
-
Hi my ipad2 just stopped working. It now won't come back to life. I have tried to sink and charge, but iPad remains black screen and no evidence of life. It only a couple of months old. Thanks
-
Live Office support for Microsoft 2010
Sorry if this is in the wrong forum- not sure where i would ask this. My customers are starting to use office 2010 and are having problems with office 2010. Does anyone have an idea of when office 2010 will be supported? Thank you, Dave
-
op for timepass