Function Modules on Appointment Calendar

Hi friends,
               I have to create a rfc which has to create entries into the appointment calendar (scc1-tcode). I want to know whether there are any BAPIs or function modules which insert this data into the respective table. And more over there is a field APPT_ID in the table which has to be automatically generated when a new appointment is created and which is to be returned ...
Please help me out
Edited by: pradeepwitu on Jul 12, 2011 9:00 AM

HI ALL,
           finally got the function moodule for that.... 'APPT_CREATE'. But how do i get the timezone??? can any 1 help me please
Edited by: pradeepwitu on Jul 12, 2011 3:24 PM

Similar Messages

  • Function Module for Holiday calendar

    Hello experts,
    Is there any function module to get Public Holiday assigned on Work schedule?
    Thanks in advance

    Dear friend,
    try this.
    Get personnel area (WERKS) and personnel sub area (BTRTL) for the given employee from table pa0001.
    pass this to table T001P and you will get the holiday calender.
    Thanks.

  • Function Module to find date by passign the Planning Calendar

    Hi All,
    Can you tell me is there any function Module to find date by passign the Planning Calendar?
    The requirement is i have a planning calender assigned to the Material in the MRP2 view.
    Example: Material XXXXXX is assigned a Planning Calendar Z01.
    Z01 is defined such that Delivery is on Monday only. This calendar says that the material is received from the Vendor only on Mondays.
    So whenever i punch a Sales Order for Material XXXXXX, a PR is automatically geenrated when saving the sales order and the calculation of Delivery dates is also happening at this level.
    Basing on this PR a PO is raised to a Vendor for procuring the Material XXXXXX, now my problem is for example the PO is raised today (30.04.2008), but the Materail XXXXXX is available only on next monday in my plant (05.05.2008) basing on my Planning Calendar assigned in the Materail Master, so i have to inform this dealy to my customer at the time of punching the sales order.
    So is there any function Module to find date by passign the Planning Calendar?
    Thanks for your valuable inputs.
    Regards,
    Sudarshan

    Hi Jorge,
    Thanks for your reply.
    I am unable to open the Function module which you have mentioned below.
    I am working on 4.6 c version of SAP.
    Any ways i have found one function module which is useful to my requirement as stated below:
    DATE_GET_PERIOD
    Thanks and Regards,
    Sudarshan

  • Need Appointment Function Module Name to Read any Opportunity  No.

    Hello Gurus
    Can anyone  tell me the Appointment  type Function Module Name where Header_guid and  Appt_type are to be supplied .
    Means i want to only read(not to change or create)  an opportunity no for a particular Appointment type(Date_type).  I tried for the following FMs:
    1.CRM_APPOINTMENT_READ_OW
    2.CRM_APPOINTMENT_DETERMINE_OW
    3.CRM_APPOINTMENT_CHECK_OW
    thanks in advance
    Madhusudan

    Hello Madhusudan,
    for the activities you can use the following coding (example):
    -Beginn-
      CALL FUNCTION 'BAPI_ACTIVITYCRM_GETDETAILMULT'
        TABLES
          guid   = lt_guid
          header = lt_header
          date   = lt_bapibus20001_app_dis.
      CALL FUNCTION '/DKVES/SM_ACTIVITY_GETFROMBUPA'
        EXPORTING
          iv_partner  = lv_partner
        TABLES
          et_contacts = lt_sm_activity_simple.
      LOOP AT lt_sm_activity_simple INTO ls_sm_activity_simple.
        CLEAR ls_bapibus20001_app_dis.
        READ TABLE lt_bapibus20001_app_dis INTO ls_bapibus20001_app_dis
        WITH KEY ref_guid = ls_sm_activity_simple-activity_guid appt_type = 'ORDERPLANNED'.
          ls_order_aktiv-date_from = ls_bapibus20001_app_dis-date_from.
        APPEND ls_order_aktiv TO lt_order_aktiv.
      ENDLOOP.
    -end-
    If you want the other 'one order Objects' you can perhaps modify the selection.
    I hope that helps
    Torsten

  • Function module SD_SCHEDULING: delivery date calculation factory calendar

    Hi,
    When I create or change a sales order, system calculates the delivery time and date (ETDAT) using transit duration and factory calendar. Currently factory calendar says that transportation leaves every Monday, Wednesday and Friday. Unfortunately, function module SD_SCHEDULING calculates the delivery date using factory calendar dates, i.e. <b>NOT</b> using working dates.
    Function module reads the factory calendar from table TVRO (Routes) and field SPFBK (Factory calendar key) in subroutine GET_CUSTOMIZING, and saves factory calendar id in CS_SCHEDDU-TRANSIT_FC. The calculation itself is done later in function module DATE_CONVERT_TO_FACTORYDATE.
    For example, if transit duration is 3 working days, function module calculates the delivery date using Monday (first day), Wednesday (second day) and Friday (third day). Thus, the result is Friday, which is wrong. Result should be of course Wednesday (Monday first day, Tuesday second day and Wednesday third day).
    I'd like to use working days instead of calendar days. I am planning to recalculate the delivery date in some user exit, but before I start coding, I'd like to hear your opinion: <i>Is it possible to use working days instead of calendar days when calculating delivery date?</i> (I believe it must be, since my case is very normal). If it is, I assume that this can be achieved with IMG, but how and where?
    I am using SAP R/3 Enterprise.
    Regards,
    Jarmo Tuominen

    Hi jarmo,
    1. DATE_CHECK_WORKINGDAY
       Probably this FM may be useful to u.
    2.
    CALL FUNCTION 'DATE_CHECK_WORKINGDAY'
            EXPORTING
              date                       = d
              factory_calendar_id        = '01'
              message_type               = 'I'
            EXCEPTIONS
              date_after_range           = 1
              date_before_range          = 2
              date_invalid               = 3
              date_no_workingday         = 4
              factory_calendar_not_found = 5
              message_type_invalid       = 6
              OTHERS                     = 7.
    regards,
    amit m.

  • Function Module to Calculate Factory Calendar

    Hi,
        We are Working generating a report for discrete Manufacturing. We need a actual days worked from the factory calendar for our MIS Reports based tat.
        Help us in find a Function Module for it.
    Regards
    Naga

    *&      Form  BILLING_DAY_IS_WORKING_DAY
          Using the date passed in next_date, verify that the date is
    a working day in the factory calendar the user specifies.  This form
    calls the standard ABAP function for determining if a date is a
    "working day".  The function first determines if the day of the week
    corresponding to the calendar date entered is a billing day.  Then
    it checks to see if the calendar date is a holiday.  If either are
    true the date_no_workingday flag is passed back as "X" and this
    routine passes back "X" to the calling routine in the parameter
    p_billing_flag.
    FORM CURRENT_DAY_IS_WORKING_DAY USING    P_NEXT_DATE TYPE D
                                    CHANGING P_NOT_BILLING_DAY TYPE C.
      CALL FUNCTION 'DATE_CHECK_WORKINGDAY'
           EXPORTING
                DATE                       = P_NEXT_DATE
                FACTORY_CALENDAR_ID        = FACTCALD
                MESSAGE_TYPE               = 'I'
           EXCEPTIONS
                DATE_AFTER_RANGE           = 1
                DATE_BEFORE_RANGE          = 2
                DATE_INVALID               = 3
                DATE_NO_WORKINGDAY         = 4
                FACTORY_CALENDAR_NOT_FOUND = 5
                MESSAGE_TYPE_INVALID       = 6
                OTHERS                     = 7.
      CASE SY-SUBRC.
        WHEN '0'.
          CLEAR P_NOT_BILLING_DAY.
        WHEN '4'.
          IF SY-DATUM > CURRENT_BDATE.
            P_NOT_BILLING_DAY = SPACE.
          ELSE.
            P_NOT_BILLING_DAY = 'X'.
          ENDIF.
        WHEN OTHERS.
          CONCATENATE: 'Error Accessing Calendar with ID: ' FACTCALD
          INTO ZZMSG_TAB2.
          APPEND ZZMSG_TAB2.
          CLEAR  ZZMSG_TAB2.
          V_LEVEL = 'E'.
          PERFORM F_ERROR_MESSAGE.
          MESSAGE E305 WITH FACTCALD.
      ENDCASE.
    ENDFORM.                               " BILLING_DAY_IS_WORKING_DAY
    *&      Form  BILLING_DAY_IS_WORKING_DAY
          Using the date passed in next_date, verify that the date is
    a working day in the factory calendar the user specifies.  This form
    calls the standard ABAP function for determining if a date is a
    "working day".  The function first determines if the day of the week
    corresponding to the calendar date entered is a billing day.  Then
    it checks to see if the calendar date is a holiday.  If either are
    true the date_no_workingday flag is passed back as "X" and this
    routine passes back "X" to the calling routine in the parameter
    p_billing_flag.
    FORM BILLING_DAY_IS_WORKING_DAY USING    P_NEXT_DATE TYPE D
                                    CHANGING P_NOT_BILLING_DAY TYPE C.
      CALL FUNCTION 'DATE_CHECK_WORKINGDAY'
           EXPORTING
                DATE                       = P_NEXT_DATE
                FACTORY_CALENDAR_ID        = FACTCALD
                MESSAGE_TYPE               = 'I'
           EXCEPTIONS
                DATE_AFTER_RANGE           = 1
                DATE_BEFORE_RANGE          = 2
                DATE_INVALID               = 3
                DATE_NO_WORKINGDAY         = 4
                FACTORY_CALENDAR_NOT_FOUND = 5
                MESSAGE_TYPE_INVALID       = 6
                OTHERS                     = 7.
      CASE SY-SUBRC.
        WHEN '0'.
          CLEAR P_NOT_BILLING_DAY.
        WHEN '4'.
          P_NOT_BILLING_DAY = 'X'.
        WHEN OTHERS.
          CONCATENATE: 'Error Accessing Calendar with ID: ' FACTCALD
          INTO ZZMSG_TAB2.
          APPEND ZZMSG_TAB2.
          CLEAR  ZZMSG_TAB2.
          V_LEVEL = 'E'.
          PERFORM F_ERROR_MESSAGE.
          MESSAGE E305 WITH FACTCALD.
      ENDCASE.
    ENDFORM.                               " BILLING_DAY_IS_WORKING_DAY
    Reward if useful

  • Appointment Calendar on Forms 6i

    Hello Forms Experts:
    I have an Health Care application with all the powerful functions availables.
    But, I need to update the release of the software and for that I want, to create a forms module to works as a appointment calendar.
    Let me explain a little more: I must develop a forms module with a layout similar to the MS Outlook.
    I want something easy and simple: a calendar layout with month field, a year field, and the days of the current month. But it has to be able to store and show, the name of the patient scheduled on a specific date and time.
    By example: April 22th, 2009 1500: Abdel Miranda
    April 22th, 2009 1600: AE Miranda
    The look and feel must have the same look and feel of the month view of the MS Outlook or could be also, the list of the appointments of the current day with the functinality to add a new appointment.
    My question is: some one has an idea of where can I find [if exists] a demo with something like I need, or some one can tell which could be the best way to develop something like that?
    Or Perhaps, some one has a Oracle Forms 8i Module already developed and I can buy it or maybe use it.
    Best regards.
    Abdel Miranda
    AEMS Global Group
    Panama

    This is the closest thing I know of... It was in the recent java bean/pjc contest... It is a planning tool using a calendar.. You might be able to alter it...
    http://www.screentoaster.com/watch/stUENTRU1IR1pbSF1eXFlYU1NR/dynitems_forms
    Not sure how it is going to funtion on 6i.
    Edited by: Mark Reichman on Apr 22, 2009 2:30 PM

  • Function Modules for Data and Time

    Hi all,
              I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in <b>dd/mm/yyyy or dd.mm.yyyy</b> and time in<b> HH:MM:SS</b> formats.
    Thanks in advance

    Hi Ranjith,
    i think this will b usefull for you..
    SAP Bar Chart Function Modules and what they are used for
    Function module
    Used for
    BARC_GRAPHIC_PBO
    Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
    BARC_GRAPHIC_PAI
    Analyzing data returned by the graphic
    BARC_SET_TIME_AXIS
    Setting start and end of time axis
    BARC_SET_OPTIONS
    Setting options
    BARC_ADD_CHART
    Creating a chart
    BARC_SET_CHART_ATTRIB
    Setting chart attributes
    BARC_ADD_SECTION
    Creating a section on the time axis
    BARC_SET_SECTION_ATTRIB
    Setting section attributes
    BARC_ADD_RIBBON
    Adding a ribbon to the time axis
    BARC_SET_RIBBON_ATTRIB
    Setting attributes for ribbons in the chart
    BARC_ADD_GRID
    Adding a time grid
    BARC_SET_GRID_ATTRIB
    Setting grid attributes
    BARC_ADD_LAYER
    Adding a layer (graphic elements)
    BARC_SET_LAYER_ATTRIB
    Setting layer attributes
    BARC_ADD_LINE
    Adding a line
    BARC_ADD_CALENDAR
    Creating a calendar
    BARC_SET_CALENDAR_ATTRIB
    Setting attributes for a calendar
    BARC_ADD_TIME_PROFILE
    Creating time profiles
    BARC_SET_TIME_PROFILE_ATTRIB
    Setting attributes for time profile
    BARC_ADD_INTERVAL
    Adding a time interval
    BARC_SET_INTERVAL_ATTRIB
    Setting time interval attributes
    BARC_ADD_TIME_OBJECT
    Creating a time object
    BARC_CONVERT_DATE
    Creating a date string in bar chart format
    BARC_REVERT_DATE
    Converting a date string in bar chart format to date and time
    BARC_ADD_DATELINE
    Creating a date line
    BARC_SET_DATELINE_ATTRIB
    Setting dateline attributes
    BARC_GET_PROFILE_CONTENTS
    Obtaining profile contents for customizing a chart
    BARC_GET_COLUMN_WIDTH
    Selecting new column width
    BARC_SET_COLUMN_WIDTH
    Setting the column width
    BARC_GET_TEXTINDEX
    Obtaining the text index of a field
    BARC_SET_LABELS
    Positioning the chart display
    BARC_SET_COLUMN_ATTRIB
    Setting column attributes
    BARC_SET_ROW_ATTRIB
    Setting row attributes
    BARC_SET_ROW_HEIGHT
    Setting the line height
    BARC_SET_MAXCHARTS
    Setting the maximum number of charts sent
    <b>If its usefull reward points
    </b>

  • ABAP - Function module to get the number of working days between 2 days

    Hi gentlemen,
    I have been asked to produce a report that gives the number of working days between 2 days, based on a calendar.
    I didn't find anything...
    Has any of you already written a function module to get this ?
    A great thanks in advance.
    Jacques Lagrif

    Hi ,
    you can try this ,
    when you require the number of working days between D1 and D2
    Total No of Days will be
    D2 - D1
    No of holidays between D1 and D2 , use the FM HOLIDAY_GET
    Pass the From date , to date , and the factory calendar to get the of Holidays
    Total no of days - Number of Holidays will your Working days
    Regards,
    Sathya

  • User Exit for Variable which calls to a Function Module is NOT working ???

    Hi all,
        I have a created a variable 'ZNBUSDAY' with Processing Type 'Customer Exit' on 0SCL_DELDAT  (Date). The query is on 0PUR_C04 and passing 0SCL_DELDAT  to Function Module  Z_WORKDAY to get the Next Business Day by using the company Calendar(30). The following code is NOT working and what is WRONG with it, PLEASE? The FM is working FINE.
    DATA: wa_calendar(2) TYPE c value '30',
          wa_znbusday    like sy-datum,
          0scl_deldat    like sy-datum,
          p_days         TYPE i value 1.
    case i_vnam.
       when 'ZNBUSDAY'.
       CLEAR wa_znbusday.
       CALL FUNCTION 'Z_WORKDAY'
         EXPORTING
         CURR_DATE        = 0scl_deldat
         NUMBER_DAYS      = p_days
         CALENDAR         = wa_calendar
       IMPORTING
         WORK_DAY         = wa_znbusday
         l_s_range-low  = wa_znbusday.
         l_s_range-opt  = 'EQ'.
         l_s_range-sign = 'I'.
         append l_s_range to e_t_range.
    endcase.
    Thanks,
    Venkat.

    Hi Venkat,
    Looks like you're only assigning type sy-datum to 0scl_deldat but not the actual value. Try the following:
    DATA: wa_calendar(2) TYPE c value '30',
          wa_znbusday    like sy-datum,
          0scl_deldat    like sy-datum,
          p_days         TYPE i value 1.
    case i_vnam.
       when 'ZNBUSDAY'.
       CLEAR wa_znbusday.
       0scl_deldat = sy-datum.
       CALL FUNCTION 'Z_WORKDAY'
         EXPORTING
         CURR_DATE        = 0scl_deldat
         NUMBER_DAYS      = p_days
         CALENDAR         = wa_calendar
       IMPORTING
         WORK_DAY         = wa_znbusday
         l_s_range-low  = wa_znbusday.
         l_s_range-opt  = 'EQ'.
         l_s_range-sign = 'I'.
         append l_s_range to e_t_range.
    endcase.
    Kind regards,
    Alex

  • Problem with Creation of CRM Order via Function Module Test

    I am trying to check the order creation process from external systems by using the test function in Tcode SE37 with Function Module BAPI_BUSPROCESSND_CREATEMULTI.
    I have created a Test Sequence of the following FMs:
    BAPI_BUSPROCESSND_PROCSETTINGS
    BAPI_BUSPROCESSND_CREATEMULTI
    BAPI_PROCESS_SAVE
    BAPI_TRANSACTION_COMMIT
    All that I have been able to create so far is an order header without a Sold-to or Ship-to and no items. I am able to populate the Organization data, Header text and Appointments. The only partner function that is being populated is the one that is being automatically picked up from my user master.
    For the BAPI_BUSPROCESSND_CREATEMULTI I am populating the following tables:
    HEADER          1 entry
    ITEM               2 entries
    PARTNER          2 entries
    ORGANISATION     1 entry
    APPOINTMENT          2 entries
    INPUT_FIELDS          41 entries     
    SCHEDULELINE     2 entries
    I have created the entries based upon information gained through debugging function module CRM_ORDER_MAINTAIN during the creation of a service order.
    It would be interesting to know if anybody has successfully created an order via the SE37 test function and if so, it would be useful to see the data in the relevant tables.

    HEllo ,
    Write a wrapper to the function module CRM_ORDER_MAINTAIN.
    To populate the Text use below code
      ls_input_field_names-fieldname  = 'REF_GUID'.
      INSERT ls_input_field_names INTO TABLE lt_input_field_names.
      ls_input_field_names-fieldname  = 'REF_KIND'.
      INSERT ls_input_field_names INTO TABLE lt_input_field_names.
      ls_input_field_names-fieldname  = 'TDID'.
      INSERT ls_input_field_names INTO TABLE lt_input_field_names.
      ls_input_field_names-fieldname  = 'TDSPRAS'.
      INSERT ls_input_field_names INTO TABLE lt_input_field_names.
      ls_input_field_names-fieldname  = 'TDSTYLE'.
      INSERT ls_input_field_names INTO TABLE lt_input_field_names.
      ls_input_field_names-fieldname  = 'TDFORM'.
      INSERT ls_input_field_names INTO TABLE lt_input_field_names.
      ls_input_field_names-fieldname  = 'LINES'.
      INSERT ls_input_field_names INTO TABLE lt_input_field_names.
      ls_input_field_names-fieldname  = 'MODE'.
      INSERT ls_input_field_names INTO TABLE lt_input_field_names.
      CLEAR ls_input_fields.
      ls_input_fields-ref_guid    = attr_guid.
      ls_input_fields-ref_kind    = 'A'.
      ls_input_fields-objectname  = 'TEXTS'.
      CONCATENATE 'CRM_ORDERH' order_guid INTO ls_input_fields-logical_key.
      ls_input_fields-field_names = lt_input_field_names.
      INSERT ls_input_fields INTO TABLE attr_t_inputfields.
    Call Order maintain FM to create any order
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          it_text               = lp_order->attr_t_text
          it_partner          = lp_order->attr_t_partner
        IMPORTING
          et_exception     = et_exception
        CHANGING
          ct_orderadm_h     = lp_order->attr_t_orderadm_h
          ct_input_fields      = lp_order->attr_t_inputfields
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    Regards
    Satish

  • Using Function modules in  BSP - Operations on Service Orders

    Hi,
    We are creating a custom BSP application for scheduling resources and updating appointments for resource personnel.
    The process is as follows:
    From the list of Service Orders with some product added as line item, with status OPEN, the user selects a SO and makes an online payment.
    Returning from the site, the Status of the Service order is changes to Released. Following this, the available resource is assigned to the Service order and the appointment details are populated in the Service Order. Subsequently, another line item of the Service order is set to Released.
    We are using the following function modules in the order as given below:
    To set status of a line item to Released
    1)     CRM_ORDER_INITIALIZE
    2)     CRM_STATUS_SET_INTERN_OW
    3)     CRM_STATUS_SAVE_OW
    4)     COMMIT WORK
    To assign a resource to the Service Order
    1)     WFD_RES_GET_AVAIL
    2)     CRM_ORDER_INITIALIZE
    3)     WFDS_GET_ASSIGNMENT_TO_SO_ITEM
    4)     CRM_ORDER_INITIALIZE
    5)     WFDS_CRM_SRV_ASSIGNMENT_MODIFY
    6)     WFDS_SAVE
    7)     WFD_TRANSACTION_COMMI
    To update the assignment dates in Service Order
    1)     CRM_ORDER_DEQUEUE
    2)     CRM_ORDER_INITIALIZE
    3)     CRM_ORDER_INIT_OW
    4)     CRM_ORDER_MAINTAIN
    5)     CRM_ORDER_SAVE
    6)     BAPI_TRANSACTION_COMMIT
    To set status of a second line item to Released
    1)     CRM_ORDER_INITIALIZE
    2)     CRM_STATUS_SET_INTERN_OW
    3)     CRM_STATUS_SAVE_OW
    4)     COMMIT WORK
    Using these FM’s in a report program or even in Debug mode works fine, except in the BSP’s where the behavior is random.
    The issue that we are facing:
    1)     Calling the Function modules sequentially, it takes time to update the order after execution of a BAPI/RFC and at times the order gets locked although we are using the Function Module CRM_ORDER_DEQUEUE after a logical block, and the Service Order is un-available for subsequent actions
    2)     At times, the Steps get executed correctly
    3)     At times the Steps get executed correctly after adding certain delay after each logical block of steps, but at times the time is not enough for the order to get updated.
    Can someone help us solve this un-predictable behavior?
    If someone has previously worked on such a requirement, please provide inputs on the scenario.
    Also, please let me know if there is a fail-proof procedure to ensure that the steps get executed completely and also if there is a need to use alternative BAPI’s in a specific order.
    Thanks,
    Regards,
    Siddhartha Jain

    I am afraid you would have :
    - to copy the standard FM 'MS_EXCEL_OLE_STANDARD_DATA' (it is wrapped up into EXCEL_OLE_STANDARD_DAT)
    - to comment this line in this newly created FM
      SET PROPERTY OF obj_ex_app 'Visible' = 1.
    - to call your own 'ZMS_EXCEL_OLE_STANDARD_DATA'
    That should do the trick.

  • Function Module for getting public holidays between two dates

    Dear Freinds,
                     I want  a function module which checks a day is public holiday or not based on the "HOLIDAY CALENDAR ID", i have
    found a function moudule('DATE_CHECK_WORKINGDAY') which checks a  holiday or not  but based on Factory Calender id,
    so could any one please let me know how can i get a day is a public holiday or not based on "HOLIDAY CALENDAR ID".
    regards
    divya.

    Hi,
    Use  HR_FORMS_READ_HOLIDAYS.
    pass calendar id, begin date, end date, holiday date.
    it will fetch the text of holiday... u can put a check that if the text fetched in initial then the holiday date u have passed is not a holiday..
    hope it helps

  • How to identify Which function modules are used in the planning area?

    Hi all,
    there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
    But how to identify which function module is used in which planning area?
    I cant find out from the where used list from function modules?
    Thanks
    pooja

    Hi Pooja,
    Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
    Regards,
    Indu

  • Function modules for F881 and F889

    Hi,
    is there some function module ( or ? ) to create records by F881 and F889, i don't want to use batch input method...
    thanks for your help.
    Pedro

    Hi Ranjith,
    i think this will b usefull for you..
    SAP Bar Chart Function Modules and what they are used for
    Function module
    Used for
    BARC_GRAPHIC_PBO
    Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
    BARC_GRAPHIC_PAI
    Analyzing data returned by the graphic
    BARC_SET_TIME_AXIS
    Setting start and end of time axis
    BARC_SET_OPTIONS
    Setting options
    BARC_ADD_CHART
    Creating a chart
    BARC_SET_CHART_ATTRIB
    Setting chart attributes
    BARC_ADD_SECTION
    Creating a section on the time axis
    BARC_SET_SECTION_ATTRIB
    Setting section attributes
    BARC_ADD_RIBBON
    Adding a ribbon to the time axis
    BARC_SET_RIBBON_ATTRIB
    Setting attributes for ribbons in the chart
    BARC_ADD_GRID
    Adding a time grid
    BARC_SET_GRID_ATTRIB
    Setting grid attributes
    BARC_ADD_LAYER
    Adding a layer (graphic elements)
    BARC_SET_LAYER_ATTRIB
    Setting layer attributes
    BARC_ADD_LINE
    Adding a line
    BARC_ADD_CALENDAR
    Creating a calendar
    BARC_SET_CALENDAR_ATTRIB
    Setting attributes for a calendar
    BARC_ADD_TIME_PROFILE
    Creating time profiles
    BARC_SET_TIME_PROFILE_ATTRIB
    Setting attributes for time profile
    BARC_ADD_INTERVAL
    Adding a time interval
    BARC_SET_INTERVAL_ATTRIB
    Setting time interval attributes
    BARC_ADD_TIME_OBJECT
    Creating a time object
    BARC_CONVERT_DATE
    Creating a date string in bar chart format
    BARC_REVERT_DATE
    Converting a date string in bar chart format to date and time
    BARC_ADD_DATELINE
    Creating a date line
    BARC_SET_DATELINE_ATTRIB
    Setting dateline attributes
    BARC_GET_PROFILE_CONTENTS
    Obtaining profile contents for customizing a chart
    BARC_GET_COLUMN_WIDTH
    Selecting new column width
    BARC_SET_COLUMN_WIDTH
    Setting the column width
    BARC_GET_TEXTINDEX
    Obtaining the text index of a field
    BARC_SET_LABELS
    Positioning the chart display
    BARC_SET_COLUMN_ATTRIB
    Setting column attributes
    BARC_SET_ROW_ATTRIB
    Setting row attributes
    BARC_SET_ROW_HEIGHT
    Setting the line height
    BARC_SET_MAXCHARTS
    Setting the maximum number of charts sent
    <b>If its usefull reward points
    </b>

Maybe you are looking for

  • Letter of Credit in FICO configuration

    HI, Plz guide me Letter of Crediti inFICO part configuration steps how to do sned me mail. Mail Id:[email protected] Advance Thanks, abhijeet Edited by: Abhijeet Walke on Feb 26, 2008 12:24 PM

  • Half Black and White half Color Video

    Is there a way to take a full color video and make half of the video black and white and the other half full color?  For instance imagine a line down the center of the video, on the left the video is black and white, on the right side it's full color

  • No DHL Here - Apple Ultracompact USB Power Adapter Exchange Program

    There is no DHL shipping center where I live but the message I got from the Apple Ultracompact USB Power Adapter Exchange Program is to ship via DHL; what should I do?

  • How to get the Actual Query of View Object

    Hi all, I have a standard. I need to modify the query of the VO attached to a picklist based on responsibility. I am able to achieve my requirement but it is getting reflected for all the responsibilities even though i extended the controller for a p

  • Sales Order changes

    Hi, This is with regrad to the updates missing in the sales order. Scenario: When a particular line item is changed and the pricing is also updated. But while checking for the changes the system history is not updated with the old value and new value