Function of Refresh Button in Web interface

Hi All,
I have created a web layout in which there is "REFRESH" button.
If i have opened the web layout and i simultaneously do some changes in back end from BW side. After clicking refresh in web interface changes are not reflected.
What exactly the function of "REFRESH" button is??
Also is there any other way through which i can get the changes( done in back end) reflected in my already logged in Web layouts??
Thanks in advance.
Regards.

Hi,
Thanks for your reply.
Can you clarify it more. Lets take an example. If i have one charachteristics for project say A and i have prepared a layout which is showing that projects attributes like project's begin date, end date, etc..
Now if i open the Web interface and at the same time if i change its end date from back end, on click of refresh the changes are not reflected...
But if i again open that Web interface changes are reflected. What is reason for this??
Any help appreciated.

Similar Messages

Hiding refresh button in Webi Report

Hello experts,
I would like to hide 'refresh' button on webi report in XI 3.1. One way to do this is using rights which I don't intend to use at this stage.
Do we have any other way out to do this task?
Many thanks in advance
Regards,
John

Options:
a) roll your own viewer/portal - probably the safest bet, although a bit unwieldy if Infoview works fine and you only want to make this specific change
b) make changes to Infoview's javascript files that render the toolbar buttons - entirely unsupported by SAP as well as a maintenance headache during upgrades
c) ...revisit your reasons for not being able to disable refresh of the report to users - surely there's a security matrix that satisfies your requirement. If there isn't (meaning that, for whatever reason you need these users to refresh against this content area in normal scenarios but want it disabled for this portion of your workflow) - then there are kludgy "work arounds" like adding/removing the user to/from a "no refresh" group you've created in the CMC, programmatically, when running the report(s)
good luck

Getting dump after pressing save button in web interface

Hi all!
When i press save button in my web interface. i'm getting dump:
The following error text was processed in the system EDW : Syntax error in program GP1ARALDY6TX0M51YNJ5FNELBCI .
The error occurred on the application server kurmutau_EDW_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: VALUE_TO_SID_CONVERT1 of program SAPLRRSI
Form: VALUE_TO_SID_CONVERT1 of program SAPLRRSI
Form: VALUE_TO_SID_CONVERT of program SAPLRRSI
Function: RRSI_VAL_SID_SINGLE_CONVERT of program SAPLRRSI
Form: GET_SID of program GP5VHI3S252BZAWN36WKBAS71QH
Form: GET_DIMID_DA of program GP5VHI3S252BZAWN36WKBAS71QH
Form: WRITEIC of program GP5VHI3S252BZAWN36WKBAS71QH
Form: WRITEIC of program GPEP1KAM5Q04J9717R7T5PDWE0W
Form: APO_WRITEIC of program GPEP1KAM5Q04J9717R7T5PDWE0W
Method: _WRITE_TO_CUBE of program CL_RSDRI_INFOCUBE=============CP
Infocube and web interface were imported from BW3.5 system...
How can i solve this problem?
Thanks in advance...

Go in ST22 and post the short dump to better ubderstand.
Regards

Trigger a process chain when user clicks on save button in web interface

Hi All,
This is a issue I'm facing with the BW BPS web interface.
BPS web interface generates a BSP application so thought posting this question in BSP forum might get some responses.
The issue is I have to trigger a process chain when the user clicks on the save button on the web interface.
I have no clue how BSP works. So if anybody has any ideas or suggestions I would greatly appreciate it.
Thanks,
Harini

Hi Dhanya,
This is the code i have in the ABAP program in the process chain. I just included the API_SEMBPS_POST part, but still it doesn't work. Please give me your email address so that i can send some screenshots.
REPORT ZHTEST.
DATA: l_subrc TYPE sy-subrc.
DATA: ls_return TYPE bapiret2.
CALL FUNCTION 'API_SEMBPS_POST'
IMPORTING
 E_SUBRC = l_subrc
 ES_RETURN = ls_return.
CALL FUNCTION 'RSAPO_CLOSE_TRANS_REQUEST'
EXPORTING
 I_INFOCUBE = 'ZMAP_TAB'
EXCEPTIONS
ILLEGAL_INPUT = 1
REQUEST_NOT_CLOSED = 2
INHERITED_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to disable refresh button in webi reports in BOXI3.1SP2-Java SDK

Hi all,
We have integrated Java with BO, here end users will give parameters through java screen. After submitting all the parameters webi reports will opens in separate window.
Here requirement is end users should pass the parameters from java screen and they should able to save the report in to excel/PDF.
Refresh/edit buttons should disable/hide in the webi report.
below is the sample url we are using in the java.
http://" + CMS + ":8080/ OpenDocument/opendoc/openDocument.jsp?"+ "iDocID=" +ReportID + "&sType=wid&sRefresh=N&sWindow=New&lsSEnter List Name: =+List&token=" + token
we tried with using &buttonrefresh=hide in above URL.
Note: We are also having hyperlink reports in the Webi.
Please provide me inputs to disable refresh button.
Thanks,
Subash

Hi,
why do not set this over the authorization scheme? Just deny your users the right to refresh/edit the report.
Regards,
Stratos

Error in web interface excel Layout

Hi ,
I have an excel layout in the web interface, which is designed to enter plan data manually. It is working fine when we enter some data and save. But it is giving following error when clicked on'Refresh' button of web interface .However it is working fine with other ALV layouts in the same interface.This is the FM : API_SEMBPS_REFRESH calling from the 'refresh' button.
Short text       -
       There is no instance of the planning processor for handle 74C1F787C20AC345B12ACA8EF2361C8D
message number -
     UPP_PP_K051
we are on BW 3.5 & SP 16. and front end GUI 6.4 and excel 2003.
Any light on this is very much appreciated.
Best Regards,
Ramesh

Hi,
Seems the problem is with your ITS server. Contact your basis team.
Regards

Web Interface - Call a function when web interface starts

Hello,
my problem is to call a function (fox formula) when the web interface starts. This function may execute only once.
Can somebody help me?
Thanks
Stefan

Hi,
1. Create a custom class ZCL_BPS in SE24 inheriting the properties from superclass CL_UPWB_BSP_APPL.
2. Redefine the method LOAD of this class ZCL_BPS and call your FOX formula over here using function module API_SEMBPS_FUNCTION_EXECUTE.
eg. code
METHOD LOAD .
TRY.
CALL METHOD SUPER->LOAD
EXPORTING
    APPLICATION_NAME = APPLICATION_NAME
RECEIVING
    APPLICATION      = APPLICATION.
CALL FUNCTION 'API_SEMBPS_FUNCTION_EXECUTE'
EXPORTING
    I_AREA           = 'ZAREA01'
    I_PLEVEL         = 'LEVL001'
    I_PACKAGE        = 'PACK001'
    I_FUNCTION       = 'PFUN001'
    I_PARAM          = 'FOXF001'.
ENDTRY.
ENDMETHOD.                    "LOAD
3. Replace CL_UPWB_BSP_APPL by ZCL_BPS in the Application Class property of your Web Interface.
This works for sure.
Please grant points if it solves your purpose.
Regards,
Deepti

Open Bex workbook from BPS web interface,How hard it could be?

Hi all,
    I want to add a link or function-button in my BPS web interface,hope it could open a query(excel analyser),I tried 2 methods as follow:
   1. MIME , It can only open a static excel file, not a analyser query. I gave up this method.
   2. I use the program RRMX_START_EXCEL and add a plan function which is a EXIT in BPS0,in my EXIT function I used some code in RRMX_START_EXCEL,I test it in BPS0 ,it works ,it can open a analyser excel query.But when I put this plan function(including a parameter group ) in BPS_WB ,when I click the function-button in web interface, it crashed,says:
Error when processing your request
What has happened?
The URL http://bw1.:8000/sap/bc/bsp/sap/zwebcaxa001_998/page1.htm was not called due to an error.
The termination type was: TH_RES_FREE
and some other Error infomation,
Is it possible to realize my requirement? or Web interface and analyzer are just 2 total differrent things ,it is not possible to realize this?
thanks all

Hi Denny,
Have a look at www.javascript.internet.com and do a search for "whatfile".....
This should give you the javascript code whereyou can enter a file name (say an excel file name) and click a button to navigate to it.
Although I have not tried exactly what you have asked, I have successfully used parts of this code to open specified files (excel files) on our local directory from a BPS planning web page.
Obviously you will need to adapt the code to your specific evironment/situation...
Good luck.
Rael

Web interface layout u2013 Standard refresh button

Hi there
In our web interface layout, we have got a button which has the label <%=otr(UPWB/REFRESH)%> .
This looks to me the standard Refresh button. When we click on this button it actually save the data in the database.
Is that what the refresh button suppose to do.
Any suggestion/advise will be greatly appreciated.
kind regards
Sarah

Hi Sarah,
it seems that the wrong OTR text was assigned to the 'save' button. <%=otr(UPWB/REFRESH)%> belongs to the submit button that only sumits the data to the server to update the plan buffer. So check in transaction bps_wb whether the correct button was used in the web interface.
Regards,
Gregor

The web address bar no longer displays the url of the open tab, the refresh button doesn't work any longer, and the more time FF is open, the slower it eventually runs.

Downloaded FF4 a while back. Not the beta version. All seemed to work well for a while. Then the aforementioned problems began. I did not add any plugins or make any changes at all. Web site addresses do not show in tabs, and the refresh button is non-functional. After FF4 has been open a while, it begins to run slower and slower as if there is a memory leak.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

URL functionality in Web Interface Builder for BPS

Hi,
I have web enabled a planning folder and in the Web Interface bulider I am trying to enhance it. The clients requirement is to be able to select a file by clicking on a URL on a shared drive, based on variable selection. The file name is smart coded
e.g.
the files may reside in
shareddrive\
if the value in variable for version is 100, then the url should be "
shareddrive\100.xls" and on cliking on this url, the file should open
if the version value is 200, then the url should be "
shareddrive\200.xls".
In the Web Interface builder, I have created subcomponent 'URL'. If I give a fixed path for the URL say "
shareddrive\100.xls" and clicking on it opens the file.
I am however unable to parmeterize it. I tried using Javascript in the "Goto URL" attribute, but it doesn't work
Any help is appreciated.
Thanks,
NS

Hello Nimmi,
here's an example that adds a button to launch the file. "VarvlSel1" is the technical name of the variable (dropdown box).
Regards,
Marc
SAP NetWeaver RIG

<a href="#1" onclick="open_file();return false;"
class="urBtnStd" id="OpenButton1" ct="Button"
style="white-space:nowrap;"
OnMouseOver="javascript:window.status = 'Open File';return true;"
title="Open File">
Open File
</a>

<script type="text/javascript">
function open_file () {
var variable1 = document.all("VarvlSel1");
var value1 = variable1.options[variable1.selectedIndex].text;
var url1 = "
sharedrive
folder
" + value1 + ".xls";
// alert(url1);
var window1 = window.open(url1,"Window1","width=310,height=400,left=100,top=100");
</script>

Web Interface - "Execute function before displaying the layout" issue

Hi Experts,
In my project we have converted some BPS planning folder to Web interface. The steps are as below:
1) Open the BPS planning folder using upspm. Copy the web interface as Web Enabled folder.
2) Generate the web interface by clicking on go to --> Generate web interface
3) Run transaction bps_wb. Open the web interface. Then generate web interface again
4) Run the web interface by clicking on 'Display perview'
5) In the web interface there are some some functions which get executed before displaying the layout.
6) For such functions, push button gets created.
7) I have set the visible property of such push button as false.
8) Most of the time, when I am running the web interface, it
is getting executed successfully.
9) Some times, the web interface is not displaying the layouts successfully.In such cases I have observed that "Execute function before displaying the layout" is not working. Due to this some values like Fiscal Year is not getting set. So, the layout is not getting displayed.
10) I understand that it may be due to compilation error.
For example, I might have made some changes in the web interface. It must be saved and web interface must be regenerated before I diplay the interface again. Can you please help me in understanding the reason of this problem.
11) Can you please help me understand the cause of point no 9. Is it a non-issue? What may be the reason that "Execute function before displaying the layout" does not work every time.
Thanks

Will a function that runs, before the data gets saved, work for you? You can configure such a function to run before the save command behind the save button you create in the planning application.

Executing the planning function while opening the web interface

hello all,
I have created a planning area based on multiprovider.This multiprovider is based on two transactional cube ie,COPA cube and Cost Center cube.
This planning area is meant for enabling integrated planning.One plans in COPA cube and other plans in Cost Center cube the income statement gets planned based on this two.
I selected planning items in multiprovider layout to display the income statement.The layout is as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 0,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Now EBIT planning item is to be calculated from the planning items as follows:
EBIT = Net Sales-Sales Overheads-Depriciation-Other Expenses
For this i have created a planning function which calculates EBIT.This function works properly,there are no issues in it.
My problem is that i want this function to be executed as soon as i open the web interface for my planning application and the result should be as follows:
PlanningItem Amount
Net Sales: 9.000,00 INR (This comes from COPA)
Sales Overheads: 200,00 INR (This comes from Cost Center)
Depreciation: 200,00 INR (This comes from Cost Center)
Other Expenses: 300,00 INR (This comes from Cost Center)
EBIT: 8.300,00 INR
Interest Income: 0,00 INR
Interest Expense: 0,00 INR
Operating Income: 0,00 INR
Taxes: 0,00 INR
Can anybody suggest how to go about this problem?
Thanks in advance.
regards,
Yogesh

Hi Yogesh,
as far as i know, there is no standard functionality for that purpose, but there are workaround for it.
1. Modify the BSP Application.
 Go to SE80 --> Repository Browser --> BSP Application --> your WI name --> page with flow logic --> double click on page1.htm --> Event handler tabstrip --> on the drop down selection press F1 --> add a function module that call you BPS function in specific event (e.g: OnInitialization).
2. Use WI-Exit Class / WI-Extention (ABAP OO).
Here you need to create sub class from Class: CL_UPWB_BSP_APPL, and assign the class to your WI. You can then add a function module that call you BPS function in method:
2.1. Load --> performed only once on intial execution of WI.
2.2. Initialisation --> called once for each server response.
2.3. Dispatch --> called at each action and also for each WI component.
You can see further information in SAP how to paper:
How to Validate manual input in WEB planning application, New BPS-Features delivered with SAP BW 3.5, etc.
You can call your BPS function with BPS API FM (See F.Group: UPC_API)
But there is also more easier way to realize your ebit calculation. If you define your EBIT calc. manually in layout (define with manually defined Lead column). With this way, You will always get your EBIT analog with inputed values.
Then you add your EBIT calc.function to Layout Component in WI in property: 'Function After Data Change'.
Best Regards,
Suan Liono

How can I find out the web interface a module function is executed from?

Hello all,
I was wondering if anybody knows how would be possible de determine the web interface a function is being launched from, within the function.
I've got this function that is used for a exit variable that updates the variable value depending on another variable in a web interface. The thing is that this very same function and variable will be used in many web interfaces and the "source" variable will be different for each mask.
So, for example, mask 1 will have variable 1 as a selector variable and variable X will be updated by it. Then I also have variable 2 in mask 2 as a selector variable and variable X will be updated by it as well.
I want to develop a code, within the function module, that depending on the web interface that is calling it, it will use a source the correct variable and for this I need to know which web interface is calling the function.
I hope to have been able to explain myself clearly. It's a purely technical question.
Thanks in advance.
Best regards.

Hi Francesco,
Are you talking about that ??? )) It will explain you about to get the name of the web page when you are executing an abap function for determining the values of variables...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20make%20a%20variable%20even%20more%20flexible%20in%20bw-bps.pdf">How to make a variable even more flexible in BW-BPS?</a>
This is weird: I wrote that document a few weeks ago, it is theorically published on SDN but this is not possible to find it by using the research tool... Maybe because it applies only to BPS in 3.5. I did not have enough time to migrate that solution to BI-IP 7.0.
Regards
Laurent

Where's the Refresh Button on Find my iPhone on web page?

Can't find any sort of refresh button on the Find my iPhone web page using iMac with Safari. Has it been removed or hidden? Clickin on the compas icon doesn't refresh either.
Help!!!!!!!!!!!!!!!!!!!!

seems as if the button was removed, is your hybrid option there as well? seems as if the refresh and hybrid button has both disappeared

Function of Refresh Button in Web interface

Similar Messages

Maybe you are looking for