Funny instance with maps in UK

I have a question.
I have downloaded UK maps and set the phone to NOT use the network. Everything works great, but this one time, while using the maps application in a different city from the one I live I got a message saying 'network access needed' and got a red 'x' on the satellite icon. I pressed cancel and the maps application loaded normally and I got the usual service, i.e got a satelite lock and was able to track my progress on the map. Any idea why it prompted me to use the network if it did not need it in the first place?

Everything anyone here will know can be found in this web page:
http://www.apple.com/iphone/features/siri-faq.html
It's not much, but it's all we have or will have until Apple makes further announcements.
Regards.

Similar Messages

Funny problem with the mapping

Dear All,
I am facing with a funny problem with the mapping.
I am working on a scenario in which Invoice IDOC created in R/3 will be posted to XI and then in XI, mapping are done to create an XML file out of that IDOC.
In the Idoc, there is a segment E1EDKA1 which is getting created multiple times for different partners alongwith their details. The fields in E1EDKA1 segment are: PARVW,PARTN LIFNR etc.
In the output I just want LIFNR number where PARVW = RE or RS.
I have done the required mapping and when I am testing the mapping its giving me the required results correctly but when I make this scenario live then in real-time, the output XML file has no value for LIFNR.
Can anybody guide me out why is it happening tht during mapping testing its giving the correct result but at real time the mapping is returing no value.
Warm Regards,
N.Jain

Hi Nishant,
Are you sure the test data which you are using while testing the mapping in IR and the one which comes when you test real time is the same?
The data which comes real time. Copy the source payload and then test in mapping. See if you get the right data which you expect. If you do then theres some problem.
Now also go to the same message and in trace you can find out the GUID of the mapping program which is used.
Go to RWB - Last button..not sure what the name is .. something similar to Cache.. Find your mapping program and see if the GUID Matches. If the GUID matches then it is okay.
Also try to do the following..
Reactive the MM/IM.
Go to ID. Make some dummy change in Interface determination and then activate it.
Check the cache notification to make sure if the cache is updated.
If the above doesnt help you let us know.
Regards,
Sumit

Can I create a lot of instance with the same name?

I have, for a project in my studies, to create a map for an adventure game. I must create monsters on this map. For this I use a class that I called Creature. In my class Map i have to initialise the monsters but I
choose their quantity with Math.random() so I don't know how much the map will contain. If in a loop I do: Creature monster = new Creature(); will I have different instances with the same name(I doubt)? Will I have one monster re-created in each iteration of the loop? How can I do to have different monsters in different places (my map is a matrix 2x2)?

You would have many Creature references made, but only one variable to hold them, and it would go out of scope outside your loop. You could create a Creature array or use a List (both defined outside your loop) - as
// array
int numCreatures = randomGeneratedCreatureQuantity();
Creature[] monsters = new Creature[numCreatures];
for (int j = 0; j < numCreatures; j++) {
monsters[j] = new Creature();
// Or a list
int numCreatures = randomGeneratedCreatureQuantity();
ArrayList monsters = new ArrayList();
for (int j = 0; j < numCreatures; j++) {
monsters.add(new Creature());
}Good luck
Lee

Wrong error message when two instances with the same PK are created commited

I accedently created two instances with the same pk and I got wrong error.
Took me a while to figure out what's going - I use multiple fields mapped on
the same column a lot but not in this case
kodo.util.FatalUserException: User errors were detected when flushing to the
data store. The getNestedExceptions() method of this exception will return
an array of the specific errors.
NestedThrowables:
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 3", "Small Business Review" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 5", "JOFOC Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 1", "RFC/AP Received" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 4", "JOFOC Submitted for Review"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 6", "FedBizOpps Announcement"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 2", "RFC/AP Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:721)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
NestedThrowablesStackTrace:
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 3", "Small Business Review" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 5", "JOFOC Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 1", "RFC/AP Received" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 4", "JOFOC Submitted for Review"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 6", "FedBizOpps Announcement"
This usually occurs when you map different fields to the same column, but
you do not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
kodo.util.UserException: Attempt to set column "MILESTONE_TYPE.DESCRIPTION"
to two different values: "ContractMilestone 2", "RFC/AP Approved" This
usually occurs when you map different fields to the same column, but you do
not keep the values of these fields in synch.
at kodo.jdbc.runtime.VRow.setObject(VRow.java:94)
at kodo.jdbc.sql.AbstractRow.setString(AbstractRow.java:316)
at kodo.jdbc.meta.ValueFieldMapping.update(ValueFieldMapping.java:195)
at kodo.jdbc.meta.ColumnFieldMapping.insert(ColumnFieldMapping.java:226)
at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:202)
at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:89)
at kodo.jdbc.runtime.JDBCStoreManager.flush(JDBCStoreManager.java:480)
at
kodo.runtime.DelegatingStoreManager.flush(DelegatingStoreManager.java:154)
at
kodo.runtime.PersistenceManagerImpl.flushInternal(PersistenceManagerImpl.jav
a:705)
at
kodo.runtime.PersistenceManagerImpl.beforeCompletion(PersistenceManagerImpl.
java:573)
at kodo.runtime.LocalManagedRuntime.commit(LocalManagedRuntime.java:63)
at
kodo.runtime.PersistenceManagerImpl.commit(PersistenceManagerImpl.java:410)
at peacetech.nci.cs.LoadData.loadLookups(LoadData.java:154)
at peacetech.nci.cs.LoadData.main(LoadData.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl
..java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:75)
Process terminated with exit code 0

Thanks for the report. I've recorded the bug here:
http://bugzilla.solarmetric.com/show_bug.cgi?id=705

What the heck is wrong with mapped instruments?!?

I'm working on scoring a piece I wrote for marching band. I used the orchestral percussion instrument included in L8. I need to work with mapped instruments so that the score for the percussion part is readable, instead of having the bass drum 8 ledger lines below the staff, the crash cymbal 8 above, etc.
Mapped instruments should let me do this, but I think there is a bug. I don't know, I've never done this before.
My bass drum is played on D0, so I've mapped that to the drum group "bass drum". However, when I add the "bass drum" voice to my score style, nothing shows up, just rests. Other drums groups I've created do show up, although not all pitches I've assigned to them (for instance, I have a snare drum roll and a snare drum hit both assigned to the "snare" drum group, but only the hits show up in my score.
***???

I see your point, you're looking at it from score to MIDI. instead of MIDI to score. Mapped instruments DON'T change the note that is played they change the designation on the left side of the hyper editor from a key # to a drum name.. And on page 435 they say it is ideal for custom drum kits.
Where I get lost, and it seem implied to me in the manual that these custom drum hyper sets could be displayed in Score format.. I have tried to make drum score styles, but I just get stuck.
Lately I have gotten into the practise of making full orchestral scores of songs (but doing pop music). I've found it extremely helpful in arranging to be able to see 6 - 10 tracks of instruments and exactly what they are doing in every measure. It's easier to thin things out, fix note conflicts, see where sections or phrases need doubling, re-inforcement, or cutting. Also by doing this, I already have things fully scored out, and I need to make use 'standard music and drum notation'.
You can't change any notes on the DRUM MIDI track , because BFD2 or Superior drums will not play the correct articulation anymore. BFD hats have 9 articulations (different midi note for each hit). Yet you want to still display those in standard drum score as two different note heads on the line of the staff. And a lot of the other kits have a lot of articulations also. The point of it for me was that I could look at the score and fix things from there as song was playing.. And a drummer could look at it and see an accurate drum representation of what the file is playing.
You can easily edit regular instruments from score page, by sliding bass notes, cutting out grace notes etc. But with the drums you have to go back to the midi edit page.. Looking at a drum performance on the piano roll is hard (it's spread out over 5 or 6 octaves). A lot of times they create variations by using a lot of different articulations.
I can easily detect kick, snare, hats, toms on the piano roll, but the alternate articulations are a B*tch. I often drag a lot of the BFD 1 bar MIDI loops into Logic, then arrange those into a performance. But then you need to sometimes go in and 'even out' the hats, or snare hits, etc. Trying to do it on the piano roll, is time consuming, and you want to make sure you don't have two kick notes playing at same time etc, when you are in the midst of cutting, dragging, and pasting sections, of drum data.
I do on occassion make individual one line percussion staves to show congas or exotic percussion. But in general I want to use standard drum notation (kick, snare, hats, cymbals and toms on one drum percussion staff)
Another great reason to understand and use Drum Hypersets, is that you could switch drums midstream. Say you start with BFD drums but then want to move over to Addictive Drums.
I thought it would be possible to create a drum Hyperset to accomodate that. I started to look into it but got too bogged down trying to work it out
If anyone else has worked this out, please jump in..

Create at runtime a job to run at the central instance with high priority

Hi All
Using the function modules ( job_open, job_submit and job_close ) or ( job_open, submit via job jobname number jobcount, job_close) I need that this job runs in the central instance and with high priority.
I would like to know how to inform it using the statements above? How to pass the parameters to make the job run in the central instance with high priority?
I would appreciate any help.
Thanks in advance.
João Gaia

Hi
I hadn't realized about the parameter TARGETSERVER of the function module JOBCLOSE. I am going to make some tests.
thanks in advance

Problem with maps on e72

Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.

I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

JSPM: Error while detecting start profile for instance with ID _c.

Hi Experts,
we have an error when we start JSPM with message "cannot initialize application data. Error while detecting start profile for instance with ID _c." . Until now nothing has been updated yet. The system can be started up and shut down without any problem. The profiles are found in /usr/sap/PMA/SYS/profile
Our BI system is currently Netweaver 7.0 with SPS14. We plan to update it to SPS20. But when we start JSPM, we have abover error.
could somebody give a help? Thank you very much.
Rongfeng
P.S. the log file DETECT_SYSTEM_PARAMETERS_01.LOG:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!PATTERN[DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5^H#C000995FC0200000000000207BD47BD40004789C01294DB0#1258511336558#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#Java###Initializing JSPM data model...##
#1.5^H#C000995FC0200000000000217BD47BD40004789C01295968#1258511336561#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#Java###Detected profile directory .#1#/usr/sap/PMA/SYS/profile#
#1.5^H#C000995FC0200000000000227BD47BD40004789C0141AFE0#1258511338156#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#Java###Detecting the parameters of the database...##
#1.5^H#C000995FC0200000000000237BD47BD40004789C014205D0#1258511338178#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#Java###Executing command with arguments .#2#dbinfo#/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000247BD47BD40004789C01421570#1258511338182#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#Java###Java process ID , name has been started.#2#5#com.sap.sdt.dmt.main.DMT#
#1.5^H#C000995FC0200000000000257BD47BD40004789C01421958#1258511338183#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#Java###Command line: #2# #/opt/IBMJava2-amd64-142/jre/bin/java -cp .:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/sdt_dmt.jar:/oracle/client/10x_64/instantclient/ojdbc14.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jddi.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/opensqlsta.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/frame.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jperflib.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/util.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/opensqlsta.jar:/sapmnt/PMA/global/security/lib/tools/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/tools/iaik_jce.jar:/sapmnt/PMA/global/security/lib/tools/iaik_smime.jar:/sapmnt/PMA/global/security/lib/tools/iaik_jsse.jar:/sapmnt/PMA/global/security/lib/tools/w3c_http.jar:/sapmnt/PMA/global/security/lib/tools/iaik_ssl.jar:/sapmnt/PMA/global/security/lib/engine/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/engine/iaik_jce.jar com.sap.sdt.dmt.main.DMT -rootdir=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM -descriptor=csrt29_PMA -logfile=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01.LOG dbinfo /usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000267BD47BD40004789C01422128#1258511338185#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#Java###Standard out: #2# #/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01_01.OUT#
#1.5^H#C000995FC0200000000000277BD47BD40004789C01424838#1258511338195#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#Java###Process ID has been started.#1#5#
#1.5^H#C000995FC0200000000000287BD47BD40004789C014253F0#1258511338198#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#Java###Waiting for process ID , name to finish.#2#5#java#
#1.5^H#C000995FC0200000000000297BD47BD40004789C017402B0#1258511341454#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#Java###Process ID , name has been finished, exit code .#3#5#java#0#
#1.5^H#C000995FC02000000000002A7BD47BD40004789C01741638#1258511341459#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#Java###Command has been executed.#1#dbinfo#
#1.5^H#C000995FC02000000000002B7BD47BD40004789C017421F0#1258511341462#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#Java###Detection of the parameters of the database has finished. Database type is , database name is and database version is .#3#ORA#Oracle#10.2.0.2.0#
#1.5^H#C000995FC02000000000002C7BD47BD40004789C01744CE8#1258511341473#/System/Server/Upgrade/JSPM##com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#Java###Parameter has been detected. Parameter value is .#2#/J2EE/StandardSystem/DefaultProfilePath#/usr/sap/PMA/SYS/profile/DEFAULT.PFL#
Sorry, I don't know how to format post
Edited by: Rongfeng Shi on Nov 18, 2009 4:20 AM

Hi Rongfeng,
There is not much information about the error in the log file you have pasted above.
Please repeat the issue and catch the log files once again.
Are you able to open SDM ?
Best Regards
Raghu

Create a new user for oracle 10G ASM instance with sysdba system privilege

Hi,
In our Golden Gate Project, we require the SYS user credential to connect to the Oracle 10g ASM instance to read the database transaction logs.But our client is not providing the SYS user credential to connnect to ASM instance.
I'm getting the error message "ORA-01109: database not open",When I tried to create a new user using the below the steps in oracle 10g ASM instance
1. Login using "sqlplus / as sysdba"
2. Create user <username> identified by <password>;
But in oracle 11g ASM instance, I'm able to create new user by connecting the ASM instance with SYSASM role without issues.
Is there is any workaround to create a new user with sysdba system privilege in oracle 10g ASM instance?.
Thanks in advance .

Hi,
Recreate the password file for the ASM instance as follows:
Unix:
orapwd file=<ORACLE_HOME>/dbs/PWD<SID> password=<sys_password>
Windows:
orapwd file=<ORACLE_HOME>/database/PWD<SID>.ora password=<sys_password>
Now sys password is reset, we are ready to use sys for ASM management. I decided to create another user ASMDBA as I tried above.
SQL> create user ASMDBA identified by test01;
User created.
SQL> grant SYSASM, SYSOPER to ASMDBA;
Grant succeeded.
SQL> select * from v$pwfile_users;
USERNAME SYSDBA SYSOPE SYSASM
SYS TRUE TRUE TRUE
ASMDBA FALSE TRUE TRUE
Please see this link : http://orachat.com/how-to-change-asm-sys-password-creating-sysasm-user-11g/
Thank you

He instance with number 4 on host could not be started within the specified timeout.

Hi,
We are upgrading our BW Java from 7.0 to 7.4 SPS 07 and are in now in Execution Phase.
Java system is not getting started.
An error has occurred during the execution of the Start Java step.
Could not start SAP instance with number 4. The instance with number 4 on host <hostname> could not be started within the specified timeout.
In error logs
Jul 8, 2014 11:31:16 AM [Error ]: Start of instances exceeded the timeout of 7200s.
Jul 8, 2014 11:31:16 AM [Warning]: The instance could not be started. Will retry after a pause of 15 seconds.
Jul 8, 2014 11:31:31 AM [Error ]: The following problem has occurred during step execution: com.sap.sdt.util.diag.DiagException: Could not start SAP instance with number 4.
The instance with number 4 on host <hostname> could not be started within the specified timeout.
Can you please help
Thanks & Regards
Amit Shedge

Hi Amit,
Please check if the instance exists in the system instance list with number 4 and <hostname>.
sapcontrol -nr 04 -function GetSystemInstanceList
If so, add SAPLOCALHOST and SAPLOCALHOSTFULL parameters to the following Java and SCS instance parameter files.
Java instance parameter file: /SUM/sdt/<SID>/SYS/profile/<SID>_JC04_<hostname>
SCS instance parameter file: /SUM/sdt/<SID>/SYS/profile/<SID>_SCSXX_<hostname>
After adding the parameters, restart the sapstartsrv services for both of the above instances:
sapcontrol -nr 04 -function RestartService
sapcontrol -nr XX -function RestartService
Repeat the failed step.
BR,
Alper Somuncu

Unable to create Instance with Object Editor and Attachment Pattern

Hi Experts,
I created a simple entity service with some attributes and a document reference.
I also configured an object editor pattern and assigned a attachment pattern. The created object editor works as long as I don't attach a file. But if I attach a file and want to save it I get an error message "cannot create"
In the default log.trc I have some entries
Cannot read associated instance with MOF ID 105D8E0C4F02D45AFFD5B9D6A09EFB7A of MOF Layer 2 for (6DC24B80F6004CDBF4FA6C560AEDD33C,<null>)
and
refPackageM1(com.sap.ip.bi.sdk.dac.olap.query) failed RepositoryDBMemory. Using generic one.
I configured the j2ee engine according the tutorial "Integrating KM with CAF UI Patterns"
So what is wrong?
Best regards Manuel

Hi,
From the stacktrace I assume that the following happens (please correct me, if I'm wrong):
* Some time based event mechanism sends an event to your custom event handler code. That code is execute in some system context.
* Your handler uses the RF API to create a collection. All this is perfectly OK. Here my assumptions end, the next steps are solid facts.
* Within the RF all property filters are informed that a resource is about to be created. One of the filters is trying to obtain a lock from a system provided Locking Service.
* That service refuses to grant the lock, telling that system users are not allowed to do so.
Most proably you cannot do anything to solve this problem by yourself. When I ran into the same Exception once, I could avoid to have my code run in a system thread. Well you might try to do the same.
Otherwise please open a customer message and complain about the restiction in the locking behaviour.
Best regards,
Michael

Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.

Just tried to update my iPad 2 to the current iOS, and I got an error that said the update wouldn't install. The iPad is stuck in a funny mode with the apple and spinning wheel showing. I can't power it down or restart it. What next? Thanks.

Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.

Trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.

I am trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
WSUS Server : Windows Server 2012 R2
Remote SQL Server: 2012 SP1 CU7 hosted on Windows Server 2012 R2
Please let me know if anyone has experienced this issue.

We were trying to install WSUS role on Windows Server 2012 R2 using dedicated SQL Instance with static port on remote SQL Server 2012 SP1 CU7 on Windows Server 2012 R2.
It verifies the connection and then throws the error:
The request to add or remove features on the specified server failed. The operation cannot be completed, because the server you specified requires a restart.
Same error even after rebooting the server multiple times.
WSUS Server : Windows Server Standard2012 R2
Remote SQL Server: Windows Server 2012 SP1 CU7 hosted on Windows Server 2012 R2
Event ID 7000:
The Windows Internal Database service failed to start due to the following error:
The service did not start due to a logon failure.
Event ID 7041
The MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID with the currently configured password due to the following error:
Logon failure: the user has not been granted the requested logon type at this computer.
Service: MSSQL$MICROSOFT##WID
Domain and account: NT SERVICE\MSSQL$MICROSOFT##WID
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this. If this computer is a node in a cluster, check that this user
right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed, check with your domain administrator to find out if a Group Policy object associated
with this node might be removing the right.
I found following article:
"MSSQL$MICROSOFT##WID service was unable to log on as NT SERVICE\MSSQL$MICROSOFT##WID" error when you install WID in Windows Server 2012
http://support.microsoft.com/kb/2832204/en-us
To work around the issue, use one of the following methods:
Assign the Log on as a service user right to NT SERVICE\ALL SERVICES in the GPO that defines the user right.
Exclude the computer from the GPO that defines the user right.
We moved the SCCM server to OU where no policies were getting applied and then applied the new GPO to that OU. Restarted the server and we were able to install WSUS role.
Regards
PR

Funny instance with maps in UK

Similar Messages

Maybe you are looking for