Funtion Modules Help Needed in Balvex01
I could not figure out how these function modules work
please help me out thank you all
REUSE_ALV_EXTRACT_AT_SELSCREEN
REUSE_ALV_EXTRACT_AT_F4_P_EX1
REUSE_ALV_EXTRACT_AT_F4_P_EX1
REUSE_ALV_EXTRACT_SAVE
REUSE_ALV_EXTRACT_LOAD
jt512 wrote:
See http://bbs.archlinux.org/viewtopic.php?id=82489
There are like 4 other threads on this topic. Did you do a search?
I did indeed, though the solutions presented seemed quite convoluted.
Luckily, I have printing working by readding the printer.
Similar Messages
-
Help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
help needed in PS module on CJ9ECP/CJ20N for revaluating CCR??
How to handle method on_costing_component_to_outtab which belongs to badi gui_itemization_ck. This is to revaluate CCR in CJ20N.
From sale transaction(va01/va02) i need to call cj20n/cj9ecp for revaluating cost estimates. Can anyone say how to proceed with this thing.
Can any one say how to handle pop up window in CJ20N/CJ9ECP when clicked edit ecp button. Later how to revaluate cost estimates. For this should i need to go for call transaction or is there any method available. If so how to handle method for revaluating cost estimates for ECP of WBS elementsThanks Amol for the advice.
My friend doesn't belong to an engineering background and had not worked in a manufacturing environment.
He holds an MBA degree specialised in systems and has worked in software companies supporting software projects and the functions(like HR,Procurement in the same setup) as a software quality guy.
Moreover the modules mentioned by you requires engineering background with manufacturing exposure.
He had enquired for the course at siemens and they said that he may not be suitable for any of the modules offered by them as per the above reasons.They also mentioned that they have to check with SAP Labs for expert opinion.
Please provide your inputs.
regards,
Zubair. -
How to create a funtion module as i need.
How to create a funtion module, that which should retrive mutiple data with out using data structure.
i.e..using internal table i need to get only some data.
Example:
1) Using MARC table, i need to get fields only with data (werks, matnr, mmsta, pstat).
i.e importing : werks.
exporting: werks,
matnr,
mmsta,
pstat.
2) Also i need coding to get data by without using internal table with the only fields i want.Hi,
You can only create function modules and function groups using the Function Builder in the ABAP Workbench. For further information, refer to Creating New Function Modules. This section uses an example to illustrate how a function module is created from the point of view of ABAP programming.
<u><b>Function Groups and Function Modules:</b></u>
Firstly, we create a new function group DEMO_SPFLI to hold the function module. Then, we can create the new function module.
<u><b>Parameter Interface:</b></u>
You can specify the types of interface parameters in function modules in the
same way as the parameter interfaces of subroutines. Since function
modules can be used anywhere in the system, their interfaces can only contain
references to data types that are declared systemwide. These are the elementary
ABAP data types, the systemwide generic types, such as ANY TABLE, and types
defined in the ABAP Dictionary. You cannot use LIKE to refer to data types
declared in the main program.
<u><b>Exceptions:</b></u>
Our function module needs an exception that it can trigger if there are no entries
in table SPFLI that meet the selection criterion. The exception NOT_FOUND
serves this function.
<u><b>Source Code:</b></u>
Having defined the parameter interface and exceptions, we can now write the
source code of our function module. To do this, choose Source code in the
Function Builder. This opens the ABAP Editor for the include program
L<fgrp>U<xx> (see Function Groups). This is the include that will
hold the program code for the function module;
<i><u><b>Data in Function Modules</b></u></i>
You can use the TYPES and DATA statements to create local data types and
objects. The interface parameters also behave like local data objects. In
addition, you can access all of the global data of the main program. This data is
defined in the include program L<fgrp>TOP. To open this include, choose Goto
Global data. The global data behaves like the instance attributes of a class.
The first time you call a function module in a particular function group, the data is
loaded into memory. It can then be accessed and changed by all of the function
modules in the group. The system retains the values until the next time a function
module is called.
<u><b>Calling Subroutines</b></u>
You use subroutines for local modularization. Function modules can
also use this technique. The function module that they call are defined in the
corresponding main program.
If you only want to call a subroutine from a single function module, it is best to
define them in the same include program as the function module itself, directly
after the ENDFUNCTION statement. These subroutines can be called from all
function modules in the function group, but for clarity, they should only be called
from the function module that precedes them.
If you want to define a subroutine that will be called from several different function
modules, you can define a special include program for it with the name
L<fgrp>F<xx>.
<b><u><i>Raising Exceptions</i></u></b>
There are two ABAP statements for raising exceptions. They can only be used in
function modules:
RAISE <except>.
and
MESSAGE..... RAISING <except>.
The effect of these statements depends on whether the calling program handles
the exception or not. If the name <except> of the exception or OTHERS occurs
in the EXCEPTIONS addition of the CALL FUNCTION statement, the exception is
handled by the calling program.
If the calling program does not handle the exception
The RAISE statement terminates the program and switches to debugging mode.
The MESSAGE ..... RAISING statement display the specified message. How the
processing continues depends on the message type.
If the calling program handles the exception, both statements return control to the
program. No values are transferred. The MESSAGE ..... RAISING statement
does not display a message. Instead, it fills the system fields SY-MSGID, SYMSGTY,
SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION READ_SPFLI_INTO_TABLE.
""Local interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM SPFLI INTO TABLE ITAB WHERE CARRID = ID.
IF SY-SUBRC NE 0.
MESSAGE E007(AT) RAISING NOT_FOUND.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where
the key field CARRID is equal to the import parameter ID and places the entries
that it finds into the internal table SPFLI_TAB. If it cannot find any entries, the
exception NOT_FOUND is triggered using MESSAGE...RAISING. Otherwise, the
table is passed to the caller as an exporting parameter.
Regards,
Bhaskar -
In the Funtion Module: SO_NEW_DOCUMENT_ATT_SEND_API1- How to add TO and CC email ids?
In the TABLE parameter RECEIVERS, there is field RECEIVER where we pass email ids and field COPY which should be 'X'.
But my concern is how will it distinguish that which email ids should be in TO and which should b in CC?
Kindly help. Thanks in advance.
Thanks & Regards,
Anindita GhoshHello Anindita,
Say you need to send mail to 2 receivers and the 1st one is TO and the second is CC.
Just create 2 entries in the internal table of type SOMLRECI1.
wa_receiver-receiver = <email id of TO>
wa_receiver-express = 'X'.
wa_receiver-rec_type = 'U' (if sending to an external internet id - yahoo,gmail etc)
append wa_receiver to it_receiver.
clear wa_receiver.
wa_receiver-receiver = <email id of CC>
wa_receiver-express = 'X'.
wa_receiver-rec_type = 'U' (if sending to an external internet id - yahoo,gmail etc)
wa_receiver-copy = 'X'.
append wa_receiver to it_receiver.
clear wa_receiver.
Hope this helps
Regards
Sachin -
EDI IDOC generation for interface with Vendor software help needed.
EDI IDOC help needed.
We are NOT an EDI shop, but have a project to output data to Sales Force.com
Sales Force requests IDOC output - eg. 810 Outbound Invoice.
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments?
I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Basicall we have a report program that the user enteres in the date range of Order/Quotes/Invoices they wish to extract, the the program needs to output a flat file (.txt) on the server which is then picked up by Sales Force.com.
Also, is there a way to have in the Partner Profile a generic Partner under the "Type KU" that can be used for all orders/invoices so I don't have to create a KU Partner Type for each and every Sold-To customer we have?
I am very new to EDI so any help would be greatly appreciated.
Thanks.
Scott.Hi Scott,
We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
I know it's very tempting to use an interface for such loads if you anyhow have to create one. However, often the volume alone speaks against interface usage for such scenarios.
Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments? I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
Well, the E2* segments basically reflect the external name of the IDoc segment, whereas the function modules you're referring to basically just create an internal version of the IDoc. Once the IDoc framework then passes the IDocs to the partner, the segment names usually (depends on how the IDocs are passed on) get converted to their external name. If there are multiple versions of a segment, then the version number will be appended to the segment name.
Note that IDoc segment definitions are only partially stored in the data dictionary. If you want to see all versions you should always use transaction WE31 to look at segments. There you can also see for example for E1EDK01 the several versions and when you then use in SE37 function module SEGMENT_EXTERNAL_NAME_GET you will see what SAP produces as the external name for segment E1EDK01. This function module is basically the one that handles the segment name translations.
Ignore the comments for subsystem, this is basically an option in SAP to possibly trigger further external tools (e.g. mapping etc.) for handling the outbound IDocs.
Again, the funny thing is that via the WE30 transaction, if i put in INVOIC02 as the Obj. name and see the segments, i can see that E2EDK01 there is a version 005, but if i go to SE11 and put in E2EDK01005 structure line and i get a "not found". We just have up to E2EDK01002.
In the old days SAP used to generate E1, E2 and E3* structures in the data dictionary (SE11). The E1* structure reflected the character type representation of an IDoc segment, whereas the other two (definition and documentation) contained actual references to data elements (e.g. if you used a quantity field). However, in newer releases those dictionary structures (E2* & E3*) are no longer generated, because they're superfluous (meta data defined via WE31 is sufficient).
Cheers, harald -
Variable size item formulla key funtion module,
I am developing user interface for manual reservation (cutsom development). User wants to calculate quantity of material if he enters size1, size2 and size3. Also he wants that a formula key option to be provided so that he can mention conversion formula. Is there any standard function module for variable size formulla funtion module.
I want to use same logic of variable size item formulla of bom in the above custom template.
Please suggest.Hi
The function module EVAL_FORMULA and FORMULA_EVALUATION may help you as they all export calculated values as output. Please go to SE37 to click the button 'Function module documentation' to see more information.
Or go to SE80 to check the function group CALC to see more function.
Best Regards
Leon. -
Help needed with xml to flat file conversion
Hi all,
I am doing a webservice (SOAP) to file scenario. The file I get into the target directory is as below.
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_Test_interface xmlns:ns1="http://test_namespace.co.uk"><fieldA>0000012345</fieldA><fieldB></fieldB><fieldC>0010203040</fieldC><transaction_type>NEW</transaction_type><transaction_date>2011/08/21</transaction_date><sales data>PARTNERS (((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), (382225.17 73214.976, 398410.463 95156.636)))</sales data></ns1:MT_Test_interface>
But I want it to be a plain text file like below, not an xml file.
0000012345
0010203040
NEW
2011/08/21
PARTNERS
(((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), (382225.17 73214.976, 398410.463 95156.636)))
What are all the modules I need and also the parameters and their values please?
Any help is appreciated.
Thanks.
Ramesh.Thanks guys.
My xml now is like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:MT_test xmlns:ns1="http://test.co.uk">
- <REPORT>
<company_number>0000043239</company_number>
<transaction_type>CREATE</transaction_type>
<transaction_date>2011/08/21</transaction_date>
<sales_data>Partners (((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), (382225.17 73214.976, 398410.463 95156.636)))</Partners>
</REPORT>
</ns1:MT_test>
I am using the content conversion as below:
Recordset Structure: REPORT
Name: REPORT.addHeaderLine Value: 1
Name: REPORT.fieldSeparator Value: ,
Name: REPORT.endSeparator Value: 'nl'
Name: company_number.endSeparator Value: 'nl'
and I am getting the result as:
company_number,transaction_type,transaction_date,sales_data
0000043239,CREATE,2011/08/21,Partners (((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), 382225.17 73214.976, 398410.463 95156.636)))
But I want file like this:
company_number,transaction_type,transaction_date,sales_data
0000043239
CREATE
2011/08/21
Partners (((119006.258 169077.102), (372718.323 77854.466, 371449.872 70783.383), 382225.17 73214.976, 398410.463 95156.636)))
What will be the CC parameters please?
Many thanks.
Ramesh. -
How to Update crmd_customer_h TABLE Using CRMV_EVENT Through Funtion Module
Hi
How we can update customer_h table using the CRMV_EVENT Where i implemented logic below in the Funtion Module.
data: lt_doc_flow TYPE crmt_doc_flow_wrkt,
lw_cust_h_com TYPE crmt_customer_h_com,
lw_input_field_names TYPE crmt_input_field_names,
lt_input_field_names TYPE crmt_input_field_names_tab,
lt_objects_to_save TYPE crmt_object_guid_tab,
lw_guid TYPE CRMT_OBJECT_GUID.
DATA : lv_process_type TYPE crmt_process_type.
data: wa_doc_flow type CRMT_DOC_FLOW_WRK.
data: wa_customer_h type crmd_customer_h.
* Function module for retriving the Process type.
CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
EXPORTING
iv_orderadm_h_guid = iv_header_guid
IMPORTING
ev_process_type = lv_process_type
EXCEPTIONS
admin_header_not_found = 1
OTHERS = 2.
if lv_process_type eq 'ZG01'.
CALL FUNCTION 'CRM_DOC_FLOW_READ_OB'
EXPORTING
IV_HEADER_GUID = iv_header_guid
IMPORTING
ET_DOC_FLOW_WRK = lt_doc_flow.
read table lt_doc_flow with key objtype_a = 'BUS2000116' INTO wa_doc_flow. "gc_object_type-service.
if sy-subrc eq 0. "set flag for service order
lw_cust_h_com-ref_guid = wa_doc_flow-objkey_a.
lw_cust_h_com-ZZTRAIL_FLAG = 'X'.
lw_cust_h_com-mode = 'A'.
lw_cust_h_com-ref_handle = '0000000001'.
lw_guid = wa_doc_flow-objkey_a.
INSERT lw_guid INTO TABLE lt_objects_to_save.
endif.
lw_input_field_names-fieldname = 'REF_GUID'.
lw_input_field_names-fieldname = 'ZZTRAIL_FLAG'.
lw_input_field_names-changeable = ' '.
INSERT lw_input_field_names INTO TABLE lt_input_field_names.
Maintain Customer H
CALL FUNCTION 'CRM_CUSTOMER_H_MAINTAIN_OW'
EXPORTING
is_customer_h_com = lw_cust_h_com
CHANGING
ct_input_field_names = lt_input_field_names
EXCEPTIONS
header_change_error = 1
header_create_error = 2
error_occurred = 3.
ENDIF.
*endif.
*Clearing local variables
clear: lv_process_type,
lw_cust_h_com,
lw_input_field_names.
*Free internal tables
free: lt_doc_flow,
lt_input_field_names.Hi Faisal
I think your not clear with what i am saying anyhow i will again explain you my requirement
As per my requirement
1)in the service order search report i need to add a field called "Has trail order with No Follow up" with values "Yes" & "Blank"
For above Field i added using the structure CRMST_QUERY_SRVO_BTIL and through configuration i am able to display the field in webui as per (Attachement Pic 1)
2)When i search with search criteria as "Has trail order with No Follow up" with "Yes"
Then in result list i need to show the service order those having follow up as trail orders(sales order) only.if for next document trail order having any follow up then those service orders dont want to show in result list.
For above requirement i implemented F.M using CRMV_EVENT & I configured for BUS2000115 And BEFORE_SAVE The Order
The FM Will get trigger when i save the service order and for that service order if create any follow up and try to save the trail order then This FM Will trigger and in this i am doing validations.
3)Add one AET Trail Flag field is added under CUSTOMER_H Table.
4)in the FM I am validating for if the trail order having the preceding document as service order then i need to make flag as "X" For that service order in customer_h
if suppose when i delete trail order from the service order then that flag must need to be "unset" from the CUSTOMER_H.
Why bcoz we are doing above process is do show records in result list based on Flag values
these flag checks are validating in the BADI Which we implemented for search logic.
Please refer below Login for my requirement:-
Proposal to have a custom “flag” field (background at table level,
crmd_customer_h) linked to service order which gets flagged whenever at
least one Trial order is created and saved from the Service Order.
The flag value should be cleared when all the trial orders created and
saved as follow up transactions are deleted from the system.
Similarly for Trial Orders will use the same custom “flag” field
which gets activated when at least one follow up is created and saved from Trial Order.
The flag value should be cleared when all the follow up transactions from
the Trial Order are deleted from the system.
When the above search criteria “Has Trial order with no follow up”
“is” “Yes” is applied then the logic derives all the service
orders which satisfy additional search criteria applied in the search and
for these Service orders checks if the custom flag field is checked to
derive all Service orders which have Trial order. The custom flag values
values are derived from crmd_customer_h table in CRM.
4 )Further for all the Trial Orders determined in Step 3
check if the Trial Order has a follow up by checking if the custom flag field
is checked. The custom flag values are derived from crmd_customer_h table in
CRM.
5) If step 4 is not met populate the preceding Service
Orders in the Result list -
Inbound funtion module to process PORDCH02 IDOC
Hi,
I am getting a inbound purchase order PORDCH02 IDOC and i need to change the purchse order based on the idoc value , pls let me know the standard inbound purchase order funtion module attached to inbound process code.
Thanks
RaviHi,
The message type and basic idoc type for the processing of purchase orders:
PORDCH PORDCH01 -- For change
PORDCR1 PORDCR101 -- For Create
Regards,
Ginu Litta Raj -
Funtion Module to convet Date's month from numeric to words ???
Hi guys,
I have a requirement such that:-
For Date:- 06.07.2007 (DD.MM.YYYY)
i want it to display as 06-July-2007
Is there any funtion module to do that.
Regards
RahulHi,
Please use code as under :
data : date(10),
text1(26),
num1(10),
test_day(15),
o_date(20),
idate type sy-datum.
data : Day(2), month(2), Year(4).
data : ODay(2), Omonth(2), OYear(4).
data : Ltext Type T247-LTX.
date = '06.07.2007'.
day = date+0(2).
month = date+3(2).
year = date+6(4).
concatenate year month day into idate.
CALL FUNCTION 'HR_IN_GET_DATE_COMPONENTS'
EXPORTING
idate = idate
IMPORTING
DAY = oday
MONTH = omonth
YEAR = oyear
LTEXT = ltext.
concatenate oday '-' ltext '-' oyear into o_date.
write : O_date.
Reward points, if helpful,
Sandeep Kaushik -
1941W configuration help needed
Our Deployment Scenario:-
1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
Gigabit Ethernet 0/1 is connected to the wired LAN
I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
I have created 2 VLans for the Wireless.
Vlan 10 for Cisco_Kamran_A 192.168.10.x
Vlan 11 for Cisco _Kamran_BGN 192.168.11.X
The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
Can please any from the community help me and show me where I am missing the configuration.
Please find my router & ap configuration below.
Router Configuration
Router#
sh run
Building configuration...
Current configuration : 3022 bytes
! No configuration change since last restart
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
no aaa new-model
service-module wlan-ap 0 bootimage autonomous
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 192.168.11.1 192.168.11.10
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_A
network 192.168.11.0 255.255.255.0
default-router 192.168.11.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_BGN
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 195.225.241.222 213.42.20.20
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
hw-module ism 0
redundancy
bridge irb
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered GigabitEthernet0/0
arp timeout 0
no mop enabled
no mop sysid
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
no ip address
interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Vlan11
ip address 192.168.11.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxxx password 0 xxxxxx
ppp ipcp route default
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
ip access-list extended DSL_ACCESSLIST
permit ip 192.168.0.0 0.0.255.255 any
control-plane
line con 0
password xxxxxx
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password xxxxxx
login
transport input all
scheduler allocate 20000 1000
end
Router#
Router#
Router#
Access Point Configuration
ap#
ap#
ap#
sh run
Building configuration...
Current configuration : 2603 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
no aaa new-model
dot11 syslog
dot11 ssid Cisco_Kamran_A
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 1045081417161C5A555C7A7B
dot11 ssid Cisco_Kamran_BGN
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 020D05561907017015165949
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
description 802.11bgn radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
broadcast-key change 3600
ssid Cisco_Kamran_BGN
antenna gain 0
station-role root
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1
description 802.11a radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Cisco_Kamran_A
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.10
description 802.11a bridge
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0.11
description 802.11bgn bridge
encapsulation dot1Q 11
no ip route-cache
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
ap#
ap#
ap#Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting Started with Wireless - View the full discussion
conf t
interface Dot11Radio0
no ssid Cisco_Kamran_BGN
no encryption mode ciphers aes-ccm
exit
interface Dot11Radio1
no encryption mode ciphers aes-ccm
no ssid Cisco_Kamran_A
exit
dot11 ssid Cisco_Kamran_A
vlan 10
dot11 ssid Cisco_Kamran_BGN
vlan 11
exit
interface Dot11Radio0
encryption vlan 11 mode ciphers aes
ssid Cisco_Kamran_BGN
exit
interface dot11radio0.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio 0.11
encapsulation dot1q 11
bridge-group 11
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
exit
interface Dot11Radio1
encryption vlan 10 mode ciphers aes-ccm
ssid Cisco_Kamran_A
interface dot11radio1.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio1.10
encapuslation dot1q 10
bridge-group 10
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home -
How to get data from the Tables (Can func.module help then how to write )
Hi,
Can anyone tell the use of functional module to extract the data from R/3.i am working on PM module and need to extract the status of work order and equipment which i can get from First i had to get objnr then i had to go to jsto in jsto i get stsma and estat. by using estat and stsma i can get status in table tj30t here estat is same as stat in jest table.
how to get all these in bw . any help.
I need status of work orders and equipments which exists in tj30t or we can get from tj30 tables in the fields txt30 and txt04
Any one pls help to get all these stuff from R/3 to BW
Regards
Srini-----Hi
You need to enhance (write a user exit) for your Data Source.
Here are some links on UE:
Enhancment Framework
====================
SAP Help Enhancment Framework
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Enhancements in sap bw
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
User Exit Enhancments
Enhancement
User exit
BADI
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Reg's
Edan -
Hi,
I have an text table /bic/tmaterial and an internal table ITAB.
In a function module, i need to get the material numbers of /bic/tmaterial which are not present in ITAB-material(material is a field in internal table ITAB) and for those material no's i need to make an entry in the structure ZSTRUCTURE(which also contains a material no field).
Help me in this abap code to make the above functionality possible.
Please help as soon as possible
Thanks & Regards,
PraHi,
take one temp. internal table which is having the structure like
*/bic/tmaterial *
DATA : BEGIN OF i_itab OCCURS o.
INCLUDE STRUCTURE /bic/tmaterial .
DATA : END OF i_itab.
select required fields into i_itab from /bic/tmaterial.
LOOP AT i_itab.
READ TABLE ITAB WITH KEY material = i_itab-material.
IF sy-subrc NE 0.
MOVE i_itab-values to your structure ZSTRUCTURE.
ENDIF.
ENDLOOP.
CLEAR : i_itab.
FREE i_itab.
Note: you have given that ,moving fields to structure.Structure means
it will hold only one record at a time. -
User Exit for Material Group...Urgent help needed
Does anybody have an idea of which user exit can be used to capture the changes made to material group in MM02(Material)..... Urgent help needed...
See the below user exit and this will trigger under MM01,MM02 and MM17 Transaction
Enhancement name : MGA00001
Function module :EXIT_SAPLMGMU_001
Include : ZXMG0U02
Reward Points if it is helpful.
Thanks
Seshu -
User exit available in the funtion module mentioed below.
I have inbound idoc of the idoc type VEHCLE01.i have few new fields and i added as an extended idoc
I need to process this idoc in the inbound side for create and change mode by refering message funtion of the idoc of it msfunction is 1 create and if is 2 change.
for achiving this i am using two funtion module as below in my zfuntion module.
1)DOC_INPUT_VEHICLE_CREATE
2)IDOC_INPUT_VEHICLE_CHANGEMULTI
for processing the custom fields in the idoc i need to take care in some userexit of this funtion module,pls let me know the userexist where i need to take care of the custom field data from the idoc
Thanks
RaviHi Ravi
there are multiple Badi available, u have to check that which one is useful for you.
find the package name in which your function modules are (it is ISAUTO_VLC).
go to se84 ->business add in->definitions.
enter package name in selection screen and analyze available BADi for your purpose.
Thanks
Vishal Kapoor
Maybe you are looking for
-
Hard Drive is dead - deciding what to do next
Hi all, My computer is a 12 inch Powerbook G4. My hard drive is dead. Here's what happened. Night before last my powerbook was freezing randomly. In retrospect the HDD was making some clicking noises but not consistently. Following morning it freezes
-
Hi folks I hope you can indulge me. I am a mature student studying with the Open University in the UK. In order to complete my degree I have to produce a (small) project (doesn't have to have full functionality) based on a Network application. I am l
-
Is there a http api to create a new Firefox Hello conversation?
A new conversation in Firefox Hello until now can be created via button click as described here: https://support.mozilla.org/en-US/kb/firefox-hello-video-and-voice-conversations-online#w_start-a-conversation Is there already a http api to create a ne
-
Authentication or Security Checks for ABAP programs
Dear experts, Please tell me where do we give the authentication or security checks to our ABAP programs and how do we do that. ( Do not allow all to execute our developed programs). Regards, Maanasa
-
I have a vertical column with varrying prices. I want a second vertical column that is 1.25x or 25% greater than the first column. I would also like to copy/drag this formula down vertically. My only problem is that Numbers is not giving me the opt