User exit available in the funtion module mentioed below.

I have inbound idoc of the idoc type VEHCLE01.i have few new fields and i added as an extended idoc
I need to process this idoc in the inbound side for create and change mode by refering message funtion of the idoc of it msfunction is 1 create and if is 2 change.
for achiving this i am using two funtion module as below in my zfuntion module.
1)DOC_INPUT_VEHICLE_CREATE
2)IDOC_INPUT_VEHICLE_CHANGEMULTI
for processing the custom fields in the idoc i need to take care in some userexit of this funtion module,pls let me know the userexist where i need to take care of the custom field data from the idoc
Thanks
Ravi

Hi Ravi
there are multiple Badi available, u have to check that which one is useful for you.
find the package name in which your function modules are (it is ISAUTO_VLC).
go to se84 ->business add in->definitions.
enter package name in selection screen and analyze available BADi for your purpose.
Thanks
Vishal Kapoor

Similar Messages

I want the user exits in sd,mm,fi modules

i want the user exits in sd,mm,fi modules.
i dont want navigation. i want user exit names and function modules name.
include names. which include is related to particular user exit.
i want the information of this.

Hi
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit

1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward points for useful Answers
Regards
Anji

What are the user exits available related to Credit Management?

What are the user exits available related to Credit Management?
I have blocked users from releasing SO through Tciode VKM3 , now I want to block
the same (releasing of SO through VKM4) ,I want VKM4 to be used only for releasing delivery orders. Can anyone help me in configuring the same?.
Thanx in advance,
Regrds,
Binayak

Hi,
User Exits For Credit Checks And Risk Management
Credit Check
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Risk Management for Receivables
RVKMPUS2
Using this user exit, you can define new forms of payment guarantee.
Regards,
Amrish Purohit

What are the User Exit Available after saving a Billing Documents

Hi,
What are the User Exit Available after saving a Billing Documents
Regrds,
Binayak

Hi
Check the following Exits for VF01 Tcode
V61A0001                                Customer enhancement: Pricing
V60P0001                                Data provision for additional fields for display in lists
V60A0001                                Customer functions in the billing document
V05N0001                                User Exits for Printing Billing Docs. using POR Procedure
V05I0001                                User exits for billing index
SDVFX011                                Userexit for the komkcv- and kompcv-structures
SDVFX010                                User exit item table for the customer lines
SDVFX009                                Billing doc. processing KIDONO (payment reference number)
SDVFX008                                User exit: Processing of transfer structures SD-FI
SDVFX007                                User exit: Billing plan during transfer to Accounting
SDVFX006                                User exit tax line in transfer to accounting
SDVFX005                                User exit reserves in transfer to accounting
SDVFX004                                User exit G/L line in transfer to accounting
SDVFX003                                User exit cash clearing in transfer to accounting
SDVFX002                                User exit for A/R line in transfer to accounting
SDVFX001                                User exit header line in delivery to accounting
Business Add-in
SD_CIN_LV60AU02                         BADI for billing
VOR_WA_FAKTURA                          Billing before Goods Issue
Reward points if useful
Regards
Anji

BADI / USER-EXIT FOR DEFAULTING THE FIELD VTTK-TNDR_ACTC IN TCODE VT01N

Hi,
I require a BADI / USER-EXIT for defaulting the field VTTK-TNDR_ACTC(Currency of Actual Shipment costs) to 'EUR' in transaction VT01N(Shipment Transaction) .
Please could anyone help me with this .
Regards,
Sushanth H.S.

Hi!
User Exits in Transportation
In Transportation, there are enhancements that you can use with transaction CMOD.
For a detailed description of the individual enhancements, see the documentation on the individual enhancements or function modules in transaction SMOD.
You can display all enhancements that are available for the area of transportation by choosing F4 in the Enhancement field. Enter V56* in the Enhancement field and choose Execute. Enter V54* to get a list of all enhancements for the area of shipment cost processing.
Business Add-Ins in the transports
Business add-ins (BADIs) are predefined user exits. They enable businesses, partners, and customers to add additional softward to the SAP source code. The linkup of SAP's New Dimension Products, such as APO and BW, to the standard system is thus possible.
Customer-specific functions can be executed before the save time and after the database update.
The following methods are available for the BADI with the definition name 'BADI_LE_SHIPMENT':
AT_SAVE: BADI is called up at the time of the save. Checks and return to dialog are possible.
BEFORE:_UPDATE: BADI is called up right before the data is saved to the database, that is, when all the data is available (for example, internal ly assigned shipment number).
IN_UPDATE: BADI is called up after the database update.
Standard Settings
Creating a BADI method:
Call up transaction SE19. Enter a name of your choice. Choose "create" and in the dialog box enter the definition name 'BADI_LE_SHIPMENT'. Afterwards, enter a short text for implementation. Save the BADI.
On the tab page 'Interface', choose the method for implementation by double-clicking on it. Now you can enter your customer-specific program code. Save and activate the code. You can acess the transmission parameters entered in the BADI definition. With the method ***_AT_SAVE you can initiate the exception ERROR_WITH_MESSAGE (description 'An error message has occurred' ) if you wish to return to the dialog.
Afterwards, go to the heading and activate the interface.
Regards
Tamá

User Exits in SD and MM Modules

Hi Guys,
Please send some User Exits in SD or MM modules and its functionality . it should be great if you send some real time scenarios with screen shots.
Regards,
Madhu

Hi Madhu,
Please find the below program which displays the available user exits for the specified transaction code. Just you need to specify the transaction code it will display all the user exits of the transaction.
Use the following link for the above from ****************
http://****************/Tutorials/ExitsBADIs/FindUserExitswithTCode.htm
You can also find some scenarios in **************** for the user exits and Badis.
Explore the **************** site.
Thanks,
Naveen Kumar.

User exit to copy the data from sales order to billing document

hi everyone,
Is there an user exit to copy the data from sales order to billing document?
Regards
Prabudh

hi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren..

How to find user exit implemented in the program

how to find user exit implemented in the program or standerd transaction

try this program to get the list of all the user exits for a transaction...
*& Report Z_USER_EXIT                                                 *
*REPORT Z_USER_EXIT                             .
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
           tadir,    "Directory of Repository Objects
           modsapt, "SAP Enhancements - Short Texts
           modact,   "Modifications
           trdir,    "System table TRDIR
           tfdir,    "Function Module
           enlfdir, "Additional Attributes for Function Modules
           tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
    SELECT SINGLE * FROM tstc
      WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
    IF sy-subrc EQ 0.
      SELECT SINGLE * FROM tadir
         WHERE pgmid    = 'R3TR'
           AND object   = 'PROG'
           AND obj_name = tstc-pgmna.
      MOVE : tadir-devclass TO v_devclass.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM trdir
           WHERE name = tstc-pgmna.
        IF trdir-subc EQ 'F'.
          SELECT SINGLE * FROM tfdir
            WHERE pname = tstc-pgmna.
          SELECT SINGLE * FROM enlfdir
            WHERE funcname = tfdir-funcname.
          SELECT SINGLE * FROM tadir
            WHERE pgmid    = 'R3TR'
              AND object   = 'FUGR'
              AND obj_name = enlfdir-area.
          MOVE : tadir-devclass TO v_devclass.
        ENDIF.
      ENDIF.
Find SAP Modifactions
      SELECT * FROM tadir
        INTO TABLE jtab
        WHERE pgmid    = 'R3TR'
          AND object   = 'SMOD'
          AND devclass = v_devclass.
      SELECT SINGLE * FROM tstct
        WHERE sprsl EQ sy-langu
          AND tcode EQ p_tcode.
      FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
      WRITE:/(19) 'Transaction Code - ',
      20(20) p_tcode,
      45(50) tstct-ttext.
      SKIP.
      IF NOT jtab[] IS INITIAL.
        WRITE:/(95) sy-uline.
        FORMAT COLOR COL_HEADING INTENSIFIED ON.
        WRITE:/1 sy-vline,
        2 'Exit Name',
        21 sy-vline ,
        22 'Description',
        95 sy-vline.
        WRITE:/(95) sy-uline.
        LOOP AT jtab.
          SELECT SINGLE * FROM modsapt
          WHERE sprsl = sy-langu AND
          name = jtab-obj_name.
          FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WRITE:/1 sy-vline,
          2 jtab-obj_name HOTSPOT ON,
          21 sy-vline ,
          22 modsapt-modtext,
          95 sy-vline.
        ENDLOOP.
        WRITE:/(95) sy-uline.
        DESCRIBE TABLE jtab.
        SKIP.
        FORMAT COLOR COL_TOTAL INTENSIFIED ON.
        WRITE:/ 'No of Exits:' , sy-tfill.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'No User Exit exists'.
      ENDIF.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'Transaction Code Does Not Exist'.
    ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
    GET CURSOR FIELD field1.
    CHECK field1(4) EQ 'JTAB'.
    SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

BADI or User Exit to Change the Item Details in AFAB Transaction(Depreciation)

Hi Experts,
I have a requirement of changing the Item details in AFAB Transaction (Internal Order Number). Is there any BADI or User exit available for that.
Thanks in advance.

Hi Sivag,
You can find BADI for transaction in different ways. Try with below methods
1. To find New BADI(Karnel), Run the transaction with debug mode(/h), keep break point at statement
    CALL BADI
2. To find old BADI (Classic), Keep break point at exit handler CL_EXITHANDLER=>GET_INSTANCE and         run the transaction
3. Check in SPRO transaction - Check with functional consultant in which business process this transaction    comes and any customization details available
4. Get pakage name of transaction and go to to tcode se84 enhancement browser . Try to find with package name, any enhancement available
Thanks & Regards,
aRun

User exit for Reversing the Document

Hi,
Is there any User exit for reversing the document for FBRA?
Thanks

Hi,
Execute this report you will get the list of user exist for particular transaction,The inpur parameter for this report is transaction code , the output you will be getting is the list of user exists available for this trransaction.
If find my answer suitable pelase reward me suitable points.
REPORT Z_USEREXIT .
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                   AND object = 'PROG'
                   AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir WHERE funcname =
      tfdir-funcname.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                         AND object = 'FUGR'
                         AND obj_name EQ enlfdir-area.
      MOVE : tadir-devclass TO v_devclass.
    ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
                WHERE pgmid = 'R3TR'
                  AND object = 'SMOD'
                  AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND
                                   tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
       20(20) p_tcode,
       45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
           2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt
             WHERE sprsl = sy-langu AND
                    name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline,
             2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
Regards,
Irfan Hussain

Billing user exit to overwrite the service rendered date with billing date

Hello,
My client would like to determin the rebate conditions based on billing date. However, the system only uses the service rendered date for rebate determination.
Therefore, I am trying to overwrite the service rendered date with billing date at the time of billing creation.
Could you please let me know what user exit I can use?
I can't user the user exit RV60AFZC because the billing date is not determined when this user exit is running.
Your help would be appreicated! I will give you good points! Thanks

Hi Londa,
Try using one of the following includes for your requirement.
(a.) rv60afzz
(b.) rv60afza
(c.) rv60afzb
(d.) rv60afzd
(e.) BAdi SD_CIN_LV60AU02
or if you are working with ECC 6.0 use the Enancement Spot ES_SAPLV60A available from SE80 by giving package VF and then selecting Enhancements and then expanding Enhancement Spots
Hope these are helpful to you. Reward accordingly.
Thanks and Regards,
Maddineni Bharath.

User Exit to stop the creation of PO

Dear All,
I have a typical problem , we have 2 servers both running on ECC 6.0.
I tried creating a PO and I kept a break point in the exit EXIT_SAPMM06E_013 (INCLUDE ZXM06U44 ) in server1 and the control stops here and I can check all the values from the table EKKO .
I implemented my user exit in server 2 in the same exit EXIT_SAPMM06E_013 (INCLUDE ZXM06U44 ) , when I tried to debug , I was suprised to see that the control never comes in this FM EXIT_SAPMM06E_013 , but server 1 and server 2 are both ECC6.0
Is there any customization which I had to check from my end , so that the control can go through this user exit.
Even if I don't implement this user exit , shouldn't the flow be going the way it was in server 1 ( I mean control going through EXIT_SAPMM06E_013 (INCLUDE ZXM06U44 ) Kindly advise..
Best Regards,
Srinivas Gummadi.

Hi Srinivas,
You need to create a project in CMOD and assign the enhancement to the project.
The project should be activated otherwise the user exit will not be triggered.
Regards,
Vinod

EJB Model Builder: class is not available in the ejb module archive file.

Hi,
We are testing
SAP NetWeaver Developer Studio and
SAP NetWeaver Application Server, Java(TM) EE 5 Edition.
We created a sample EJB project(EJB 2.1) with an ejb and an EAR project, we deploy it using SAP NetWeaver Developer Studio.
But when we see in the log of the server , there is a message like this:
"EJB Model Builder: Bean class com.saptest.ejb.TestEJBBean is not available in the ejb module archive file., file: TestSAPEJB.jar#TestSAPEJB.jar"
The jar contains this class, we don't know what is wrong.
Thanks
Germán Santana
Bogota,Colombia

You should place the file at:
C:/JRun4/servers/default/default-ear/default-ejb/com/zbeans/Entity1Bean.class
[]s
Michael

How can i do a variable User exit that present the values before execute

Hi Gurus,
How can i do a variable User exit that present the values before execute, i need this:
a variable that calculate SYS-DATUM until 30 days before (I got the code) but this variable run automatic because is user exit, i want this variable but first present the values, not execute automatic, this is because the users want the report that automatic present the values , help

Hi,
Refer the below links,
http://documentation.softwareag.com/natural/nat424mf/pdf/ops_mf/conf_usrex.pdf
http://www.erpgenie.com/component/content/article/1097
http://www.apentia-online.at/UP/Apentia/files/Article/SAP_BW_User_Exits_and_BAdIs.pdf
Hope it helps you,
Regards,
Ravindra.

Program/User exit to maintain the number ranges at plant level

Hi Everybody,
Could u please tell me program/user exit to maintain the number ranges at plant level.
Thanks & Regards,
Piyush

Hi
Do you want to maintain all the number range Objects
For Material Master you can use the enhancement MGA00002
For PO Nu,ber ranges you can use the enhancement MM06E003
Thanks & Regards
Kishore

User exit available in the funtion module mentioed below.

Similar Messages

Maybe you are looking for