Fuzzy Control file build problem

Hi I want to build my fuzzy control file. For example when I build a file ( for example in Labview's example "FuzzyEx Dynamic Fuzzy Controller for a greenhouse") system didnt work. I want to build this file and control my system. Why the Labview's example didnt working when I build this file?

I built files by doing distributing your application . But again same problem occured. First image is vi image, fuzzy controller is working and membership functions are displayed. Second image is application which I built, when I run this application fuzzy controller is not working and membership functions arent displayed...where I am making mistake
Attachments:
fuzzy1.jpg ‏126 KB
fuzzy2.jpg ‏113 KB

Similar Messages

App builder problem with Fuzzy Toolkit

Hi,
today I wanted to build an app (using LV2009) with some functions from "PID and Fuzzy Control Toolkit".
Now the app builder is searching for a type definition in vi.lib (as shown in the pic), but it doesn't find the CTL file - but the path used for searching is correct! Then I do the search manually, point to the requested CTL in the correct place (and with correct name of course), and the build will succeed.
What's up here?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Solved!
Go to Solution.
Attachments:
check.png ‏18 KB

Hi,
thanks for your thoughts!
Answers:
- I use WinXP SP3, German settings
- I use LV2009SP1 for that project, toolkits are installed with that version (other LabVIEW versions are installed too, from LV8.5.1 to LV2010SP1)
- LabVIEW is installed in the "standard" path on drive C: (as can be seen on the attached pic of message #1)
- the app builder is unable to find the ctl file (the standard search dialog pops up), but the file is located on exactly the path used for searching (as can be seen on the picture)
- all I have to do (but this really annoys me) is to point LabVIEW to an item in a place it already knows...
- the type definition is part of the toolkit, it's installed/located in the standard folder of that toolkit, and I never changed/touched any path or file name
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Problem while Creating Control files while Cloning the Oracle DB

Hi,
I am failrly new to Oracle Administration. I have got the task of cloning our Production database into a new machine. With the help of various articles found over the web I have followed the below mentioned steps
1)Executed the Alter database command for getting the control file copy.
2) Taken the Datafiles,Control and redo log files copies into the Target machine.
3) Copied the Pfile with the neccessary changes into the target machine.
4) Edited the Create Control file syntax (generated from step 1) and executed the same on the target machine.
Now the problem I face is that I get the following error while executing the create Control file syntax
a)ORA-01503 - Creation of Controlfile failed.
b) ORA-00219 - Required controlfile size 41760 exceeds max allowable size 20000.
I am really stuck. Both my machine configurations and O/S installed are the same.
Please advice me on how to Proceed... Thanking you all in advannce.
Rgds,
SN.

Hi Jaffer,
This is my code........ The control file has been generated by executing the syntax alter database backup controlfile to trace at the source db .
STARTUP NOMOUNT pfile=ORADATA:ORAHOME1\ADMIN\ORACLE\PFILE\INIT.ORA;
CREATE CONTROLFILE set DATABASE "ORACLE" RESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 32
MAXINSTANCES 16
MAXLOGHISTORY 65535
LOGFILE
GROUP 1 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG2ORCL.ORA' SIZE 200K,
GROUP 2 'ORADATA:ORAHOME1\ORADATA\ORACLE\LOG1ORCL.ORA' SIZE 200K
DATAFILE
'ORADATA:ORAHOME1\ORADATA\ORACLE\SYS1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\USR1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\RBS1ORCL.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_DAT.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KAN_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_KIS_INDEX.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_LUB_DATA.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMBJ01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BIMAT01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BITPA01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BLUBFSINDEFX01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\TEMP01.DBF',
'ORADATA:ORAHOME1\ORADATA\ORACLE\BTXIS_TOOLS.ORA',
'ORADATA:ORAHOME1\ORADATA\ORACLE\IMPORT1.DBF'
CHARACTER SET WE8ISO8859P1
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
#RECOVER DATABASE
# Database can now be opened normally.
#ALTER DATABASE OPEN;
# No tempfile entries found to add.
#

Upgraded to 10.2.0.2.0, but problem with 'identifying control file'

I just applied the metalink patch to upgrade from 10.2.0.1.0 to 10.2.0.2.0 in order to install the SOA Suite. It was a clean install for 10.2.0.1.0, followed by applying the patch. I am now trying to run the new database, but I get an error:
ORA-00205: error in identifying controle file, check alert log for more info.
I edited by init.ora file, and the two control files are there as (ora_control1, ora_control2).
Any help would be greatly appreciated.
Kind regards,
Anthony

We had a similar issue and had to fix it by copying all the data files and control files to backup then ...
1) run database creation assistant to delete the database
2) using database creation assistant, create a new database with the same name
3) shut down the new database
4) leaving the new spfile in place, copy all the backups back over including controlfiles.
5) startup the database.
Don't know if it will help in your situation or not, but worth a try if someone else has the same type of problem.

Problem in recreating control file

Hi,
When i recreate controlfile ... It creates a set of datafile...
FILE# NAME STATUS
84 /u01/app/oracle/product/10.2.0/dbs/MISSING00084 RECOVER
85 /u01/app/oracle/product/10.2.0/dbs/MISSING00085 RECOVER
86 /u01/app/oracle/product/10.2.0/dbs/MISSING00086 RECOVER
Only these datafiles give problem... but these or no way related to my db. And i dint create.

Hi,
I have took the trace of the control file , from that i recreated the control file.
after creating the control file when i query,
select name from v$datafile;
i dint find the files.. but when i gave
alter database open resetlogs;
alter this only the file appears...
oracle version is 10.2.0

Problem import csv file with SQL*loader and control file

I have a *csv file looking like this:
E0100070;EKKJ 1X10/10 1 KV;1;2003-06-16;01C;75
E0100075;EKKJ 1X10/10 1 KV;500;2003-06-16;01C;67
E0100440;EKKJ 2X2,5/2,5 1 KV;1;2003-06-16;01C;37,2
E0100445;EKKJ 2X2,5/2,5 1 KV;500;2003-06-16;01C;33,2
E0100450;EKKJ 2X4/4 1 KV;1;2003-06-16;01C;53
E0100455;EKKJ 2X4/4 1 KV;500;2003-06-16;01C;47,1
I want to import this csv file to this table:
create table artikel (artnr varchar2(10), namn varchar2(25), fp_storlek number, datum date, mtrlid varchar2(5), pris number);
My controlfile looks like this:
LOAD DATA
INFILE 'e:\test.csv'
INSERT
INTO TABLE ARTIKEL
FIELDS TERMINATED BY ';'
TRAILING NULLCOLS
(ARTNR, NAMN, FP_STORLEK char "to_number(:fp_storlek,'99999')", DATUM date 'yyyy-mm-dd', MTRLID, pris char "to_number(:pris,'999999D99')")
I cant get sql*loader to import the last column(pris) as I want. It ignore my decimal point which in this case is "," and not "." maybe this is the problem. If the decimal point is the problem how can I get oracle to recognize "," as a decimal point??
the result from the import now, is that a decimal number (37,2) becomes 372 in the table

Set NLS_NUMERIC_CHARACTERS environment variable at OS level, before running SqlLoader :
$ cat test.csv
E0100070;EKKJ 1X10/10 1 KV;1;2003-06-16;01C;75
E0100075;EKKJ 1X10/10 1 KV;500;2003-06-16;01C;67
E0100440;EKKJ 2X2,5/2,5 1 KV;1;2003-06-16;01C;37,2
E0100445;EKKJ 2X2,5/2,5 1 KV;500;2003-06-16;01C;33,2
E0100450;EKKJ 2X4/4 1 KV;1;2003-06-16;01C;53
E0100455;EKKJ 2X4/4 1 KV;500;2003-06-16;01C;47,1
$ cat artikel.ctl
LOAD DATA
INFILE 'test.csv'
replace
INTO TABLE ARTIKEL
FIELDS TERMINATED BY ';'
TRAILING NULLCOLS
(ARTNR, NAMN, FP_STORLEK char "to_number(:fp_storlek,'99999')", DATUM date 'yyyy-mm-dd', MTRLID, pris char "to_number(:pris,'999999D99')")
$ sqlldr scott/tiger control=artikel
SQL*Loader: Release 10.1.0.3.0 - Production on Sat Nov 12 15:10:01 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Commit point reached - logical record count 6
$ sqlplus scott/tiger
SQL*Plus: Release 10.1.0.3.0 - Production on Sat Nov 12 15:10:11 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from artikel;
ARTNR      NAMN                      FP_STORLEK DATUM      MTRLI       PRIS
E0100070   EKKJ 1X10/10 1 KV                  1 16/06/2003 01C           75
E0100075   EKKJ 1X10/10 1 KV                500 16/06/2003 01C           67
E0100440   EKKJ 2X2,5/2,5 1 KV                1 16/06/2003 01C          372
E0100445   EKKJ 2X2,5/2,5 1 KV              500 16/06/2003 01C          332
E0100450   EKKJ 2X4/4 1 KV                    1 16/06/2003 01C           53
E0100455   EKKJ 2X4/4 1 KV                  500 16/06/2003 01C          471
6 rows selected.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
$ export NLS_NUMERIC_CHARACTERS=',.'
$ sqlldr scott/tiger control=artikel
SQL*Loader: Release 10.1.0.3.0 - Production on Sat Nov 12 15:10:41 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Commit point reached - logical record count 6
$ sqlplus scott/tiger
SQL*Plus: Release 10.1.0.3.0 - Production on Sat Nov 12 15:10:45 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select * from artikel;
ARTNR      NAMN                      FP_STORLEK DATUM      MTRLI       PRIS
E0100070   EKKJ 1X10/10 1 KV                  1 16/06/2003 01C           75
E0100075   EKKJ 1X10/10 1 KV                500 16/06/2003 01C           67
E0100440   EKKJ 2X2,5/2,5 1 KV                1 16/06/2003 01C         37,2
E0100445   EKKJ 2X2,5/2,5 1 KV              500 16/06/2003 01C         33,2
E0100450   EKKJ 2X4/4 1 KV                    1 16/06/2003 01C           53
E0100455   EKKJ 2X4/4 1 KV                  500 16/06/2003 01C         47,1
6 rows selected.
SQL>                                                                            Control file is exactly as yours, I just put replace instead of insert.

Problems creating control file in RMAN duplicate database

There is so much detail involved in this operation that I don't know what might be useful, so I'll start simple. I'm attempting to clone a database on the same host using RMAN "duplicate database". I finally got all the setup done, the OS authentication hurdles hurdled, etc. and entered the command:
duplicate target database to COPYCH2M until time "to_date('March 15 2012 12:00:00', 'Mon DD YYYY HH24:MI:SS')";
The first time I got:
ORA-19504: failed to create file "/u01/app/oracle/oradata/COPYCH2M/control01.ctl"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
There was nothing in the Oracle instructions about manually creating the directory, but I did so, thinking that might be the problem. And it created the control files! But then I got the following:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/21/2012 15:59:25
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version 11.1.0.1.0
ORA-00202: control file: '/u01/app/oracle/oradata/COPYCH2M/control01.ctl'
Sounds straightforward, if frustrating, right? Apparently you can't duplicate a database that's not in the exact same version. But:
1) The backuppiece we got the control file from was from last November.
2) The version of Oracle has not been updated since that time.
How can a file created by this version be incompatible with this version? Where is it even getting 11.1?
Thanks, I'm hoping this is easy but I can post more info if needed.

>
There was nothing in the Oracle instructions about manually creating the directory, but I did so, thinking that might be the problem. And it created the control files! But then I got the following:
>
The database is limited as to what it can create. Since you defined where you wanted the controlfiles to go (pfile/spfile), it's up to you to make sure the directory is valid and exists. :)
>
How can a file created by this version be incompatible with this version? Where is it even getting 11.1?
>
As for your controlfiles, make sure the compatible parameter is set the same on both the source and the target unless you are using the default (11.1.0.1 for you, and you aren't)
Keep going, you'll get there. RMAN duplicate is a great feature.
Good luck.

Problems creating control file (duplicated database)

Hello,
We're duplicated database but some datafiles weren't added on controlfile creation script, so I need to recreate controlfiles again with missed data files.
I launched controlfile creation script but I get the following error:
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.7.4.0 - 64bit Production
With the Partitioning option
JServer Release 8.1.7.4.0 - 64bit Production
SVRMGR> connect internal
Connected.
SVRMGR> @inicio.sql
CREATE CONTROLFILE REUSE SET DATABASE "SPT" RESETLOGS NOARCHIVELOG
ORA-01503: CREATE CONTROLFILE failed
ORA-01161: database name SPC in file header does not match given name of SPT
ORA-01110: data file 205: '/oracle/SPT/sapdata8/user2d_1/user2d.data1'
SVRMGR>
Problems are just with missed datafiles.
Should I REUSE or just SET database?
Thanks in advance for your help.
Regards,
Carles

>
There was nothing in the Oracle instructions about manually creating the directory, but I did so, thinking that might be the problem. And it created the control files! But then I got the following:
>
The database is limited as to what it can create. Since you defined where you wanted the controlfiles to go (pfile/spfile), it's up to you to make sure the directory is valid and exists. :)
>
How can a file created by this version be incompatible with this version? Where is it even getting 11.1?
>
As for your controlfiles, make sure the compatible parameter is set the same on both the source and the target unless you are using the default (11.1.0.1 for you, and you aren't)
Keep going, you'll get there. RMAN duplicate is a great feature.
Good luck.

Help required to build SQL loader control file

I have a table, That we need to load using SQL loader.
table structure is --
<emp_id>,<first_name>,<middle_name>,<last_name>,<sal>
The structure of flat file is like below,
<emp_id>|<emp_name>|<sal>
<emp_name> field can contain space to define first name, middle name and last name,
if no space is there means we only need to load first name. and one space means First and last name should load.
Sample flat file--
1001|Ram|10000
1002|Syam Kumar Sharma|20000
1003|Jadu Prashad|15000
Please help me out to build the control file.
Thanks in Advance

Means, can use DBMS_SCHEDULER for loading data ?Yes, you can create procedures for that and let the scheduler execute them on the desired interval
(you can even execute OS commands through DBMS_SCHEDULER).
Read about it here:
http://www.oracle.com/pls/db102/search?word=DBMS_SCHEDULER&partno=
http://www.oracle-base.com/articles/10g/Scheduler10g.php
By the way, instead of using sqlloader why not switch to using external tables?
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:6611962171229
http://www.oracle-base.com/articles/9i/SQLNewFeatures9i.php#ExternalTables
A few other approaches (pre 10g)
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2048340300346698595
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3084681089099

Problem in identifying control file when creating physical standby

hi there,
(database version: 10.2.0.4
plateform linux)
I'm using the command as below to create physical standby database from backup:
rman target / auxiliary sys/tiger@paceview
Recovery Manager: Release 10.2.0.4.0 - Production on Tue Sep 4 18:05:53 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: PACEVIEW (DBID=2092349485)
connected to auxiliary database: PACEVIEW (not mounted)
run {
allocate auxiliary channel c1 device type DISK;
set until sequence 38;
duplicate target database for standby dorecover nofilenamecheck;
released channel: ORA_DISK_1
allocated channel: c1
channel c1: sid=35 devtype=DISK
allocated channel: c2
channel c2: sid=36 devtype=DISK
executing command: SET until clause
Starting Duplicate Db at 04-SEP-12
contents of Memory Script:
   set until scn 138180211934;
   restore clone standby controlfile;
   sql clone 'alter database mount standby database';
executing Memory Script
executing command: SET until clause
Starting restore at 04-SEP-12
channel c1: restoring control file
ORA-19625: error identifying file /backup/rman/paceview/DEL1_standby.ctl
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
ORA-19600: input file is control file (/backup/rman/paceview/DEL1_standby.ctl)
ORA-19601: output file is control file (/PGHProdDB/oradata/paceview/control1.ctl)
failover to previous backup
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/04/2012 18:01:44
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restorei have already tried crosscheck but still giving same error
thanks

Hello;
So this is what I would do :
Backup Primary ( change to your directory as need )
RMAN RUN {
allocate channel d1 type disk;
backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database;
sql 'alter system archive log current';
backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all;
backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';
release channel d1;
}Move the backup and duplicate like this :
rman target sys/password@PRIMARY auxiliary /
RMAN> run {
allocate channel C1 device type disk;
allocate auxiliary channel C2 device type disk;
duplicate target database for standby nofilenamecheck;
}For complete details of this method see :
http://www.visi.com/~mseberg/duprman2.html
Best Regards
mseberg

Problem in creating control files

Hi
I am using oracle 9i
I want to import the excel sheet data into the database.
Please let me know how to create the control file for sql loader.
For that i created control file using the following code
set echo off ver off feed off pages 0
accept tname prompt 'Enter Name of Table: '
accept dformat prompt 'Enter Format to Use for Date Columns: '
spool &tname..ctl
select 'LOAD DATA'|| chr (10) ||
'INFILE ''' || lower (table_name) || '.dat''' || chr (10) ||
'INTO TABLE '|| table_name || chr (10)||
'FIELDS TERMINATED BY '','''||chr (10)||
'TRAILING NULLCOLS' || chr (10) || '('
from user_tables
where table_name = upper ('&tname');
select decode (rownum, 1, ' ', ' , ') ||
rpad (column_name, 33, ' ') ||
decode (data_type,
'VARCHAR2', 'CHAR NULLIF ('||column_name||'=BLANKS)',
'FLOAT', 'DECIMAL EXTERNAL NULLIF('||column_name||'=BLANKS)',
'NUMBER', decode (data_precision, 0,
'INTEGER EXTERNAL NULLIF ('||column_name||
'=BLANKS)', decode (data_scale, 0,
'INTEGER EXTERNAL NULLIF ('||
column_name||'=BLANKS)',
'DECIMAL EXTERNAL NULLIF ('||
column_name||'=BLANKS)')),
'DATE', 'DATE "&dformat" NULLIF ('||column_name||'=BLANKS)', null)
from user_tab_columns
where table_name = upper ('&tname')
order by column_id;
select ')'
from dual;
spool off
and after then i have written in the commond prompt like
C:\sqlldr username/password@host controlfile
then it is giving like this
Commit point reached - logical record count 1
Any Help?
Thank you

What does it say in the .log file?
What records are in the .bad file?
How many records in the data file - if 1 then it's all good.
Excel often puts column headings in the .csv file - you may need to SKIP the first record (look it up in the docs).
Don't hard code the filename into the control file - it's easier to do that when you load:
sqlldr u/p control=controlfile data=datafileRead carefully what FLOAT and DECIMAL mean. Unless you are dealing with binary datatypes (you aren't) you probably don't need these. Only DATE needs careful treatment.
Also, consider pulling the data in using an external table (if it is on the Oracle server already). Again, look it up in the docs - you'll still have to get the control definition right...
Regards Nigel

Problem in control file created through LKM File to Oracle (SQLLDR)

I have a fixed file ABC.txt & it has three fields/columns of length ,C1:= 4, C2 :=10 & C3:=6 & I have to use LKM File to Oracle (SQLLDR) to load data into oracle target table.
I recieved the following error at step CALL SQLLDR in the KM
"org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 3, in ?"
Then I checked the control file log & found that the position start value & end value was not defined in control file which is created automatically by LKM
SQL*Loader-350: Syntax error at line 14.
Expecting positive integer, found ":".
     C1_C1     POSITION(:), "
The control file created by ODI is & it's missing the position value.
OPTIONS (
     SKIP=0,
     ERRORS=0,
     DIRECT=FALSE
LOAD DATA
INFILE "C:/SNAPON/EOL.txt"
BADFILE "C:/SNAPON/ABC.bad"
DISCARDFILE "C:/SNAPON/ABC.dsc"
DISCARDMAX 1
INTO TABLE SNAPON_W.C$_0ABC
     C1_C1     POSITION(:),
     C2_C2     POSITION(:),
     C3_C3     POSITION(:)
Does any one know why the position value is not created in the control file .
Edited by: neeraj_singh on Mar 3, 2011 1:25 AM

Hi Neeraj,
It is happening because you have not selected the mapping execution area as STAGUING .
Open your interface , click on each and every column of your target datastore , make sure the "Execute On" is marked on "Staging Area".
Then run your interface.
Thanks,
Sutirtha

Help me to build control file

i have data file in .CSV format.
i need to upload this data into control file.
for this i wrote one control file.
my consern with date format in table.
in .csv file column B and C having date and time.
i want to merge this to columns as single column in oracle.onemore thing before date i have one extra character i need to remove that character also
example data in .csv file.
120060422 122544
220060422 122645
320060422 122744
please help me to write control file.

Open your CSV and insert a Column next to your date column enter formula
MID(Cell Number, Starting Position, Number of Characters to return)
Drag this formula till last cell select the column and Copy-> Paste Special Values
Then delete the original column
Also you can merge the two date columns in excel itself by using the formula
Concatenate(Cell A, Cell B)
Then you can upload this data.
Hope this helps.
Rajnish

Problem while recreating control file : Oracle 10g

Hi,
I am using oracle 10g version of database. i have multiple databases. I was not able to start one database which led to control file error. Then I found that the file got corrupted. I used the following syntax to restore my control file.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "mydb" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 30
MAXINSTANCES 8
MAXLOGHISTORY 800
LOGFILE
GROUP 1 'redolog location' SIZE 500K
DATAFILE
'datafilelocation.dbf'
but it failed with the following error.
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01115: IO error reading block from file (block # 1)
ORA-01110: data file : 'datafilelocation.dbf'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 23) Data error (cyclic redundancy check).
Does this mean the datafiles are also corrupted? if yes, please do let me know how i can restore my datafiles. my system is of windows XP 2002.
thanks,
Haripriya

Hi,
thanks for all your replies. But I am using the full path for the log and for the datafiles. Just didnt want to reveal that before. Anyway below is the complete path that i was using.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "ACMDB" NORESETLOGS NOARCHIVELOG
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 30
MAXINSTANCES 8
MAXLOGHISTORY 800
LOGFILE
GROUP 1 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\ACMDB\REDO01.LOG' SIZE 500K,
GROUP 2 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\ACMDB\REDO02.LOG' SIZE 500K,
GROUP 2 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\ACMDB\REDO03.LOG' SIZE 500K
DATAFILE
'D:/oracle/product/10.1.0/oradata/acmdb/SYSAUX01.dbf',
'D:/oracle/product/10.1.0/oradata/acmdb/SYSTEM01.dbf',
'D:/oracle/product/10.1.0/oradata/acmdb/TEMP01.dbf',
'D:/oracle/product/10.1.0/oradata/acmdb/UNDOTBS01.dbf',
'D:/oracle/product/10.1.0/oradata/acmdb/USERS01.dbf'
It is stull failing. I was not able to open the datafiles also. Looks like those are also very much corrupted. Does this mean my DB is crashed? Is there any way that I can correct the below error or only reinstallation would solve the issue. I do have all the database dump though. Please suggest me with the solution. I would like to make the reinstall as the last option.
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01115: IO error reading block from file (block # 1)
ORA-01110: data file : 'D:/oracle/product/10.1.0/oradata/acmdb/SYSTEM01.dbf'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 23) Data error (cyclic redundancy check).
Thanks,
Haripriya

Unable to load Site Control File

Hello,
The background :
I am in the process of learning how to create a Management Pack for a distributed application in SCOM 2012 R2.</p><p>For this, I picked our SCCM Site server to use as an example. So, in short, am writing a management pack for SCCM 2007 Discovery.
I know a management pack might already exist. I am trying to learn by using an architecture I'm familiar with so I need to create this from scratch.
In order to discover SCCM Site installed on a server, I decided to use the SMS WMI namespace. By reading the
SMS_ProviderLocation Instance, I am able to detect if the server has SCCM Site installed on it.
My next step was to find out where the SMS database is hosted. I found
ROOT\SMS\site_ABC\ namespace contains an instance of SMS_SCI_SiteDefinition where I can find the database name and server name which I can use to discover the other components of a distributed application.
The problem :
When I run the query Select * from SMS_SCI_SiteDefinition I get a generic error 0x80041001.
More Information reveals the following:
error description : " Unable to load site control file "
error code : " 2160198400 (0x80c20300) "
file name : " c:\qfe\nts_sms_fre\sms\siteserver\sdk_provider\smsprov\sspsitecontrolextractor.cpp "
Now, I cannot find the QFE folder anywhere. The SCCM Site is working fine and the site_control_manager component has no errors. I can launch the SCCM console on that server without any errors and the site status messages do not contain any errors.
Can someone please help me out with "detecting" an installed instance of SCCM site server using WMI? Is the above error cause for worry for the SCCM part of my brain?
Thanks in advance for your guidance!

Thanks for your response Don!
The SMS_Site instance does not provide information of the database server and database name.
The funny thing is when I browse use wbemtest to connect to root\SMS\site_XXX and enumerate classes, i do not find
the SMS_SCI_SiteDefinition.
I find it when i enumerate recursively and can browse into the values. I'm not sure how could build a query against this now.
Can anybody with a test instance of SCCM 2007 check this and let me know please?
Everything you are looking for exist within WMI. You can use the documentation script as an example to get what you are looking for.
http://www.enhansoft.com/pages/downloads.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Fuzzy Control file build problem

Similar Messages

Maybe you are looking for