Game Demos for new imac

Are there any good games or game demos to try out my new imac. Can anyone suggest a good website for this?
Thanks

Hi,
have a look at Mac Games: http://www.insidemacgames.com/
As for Demos I would suggest Prey, Quake 4, Doom 3, Age Of Empire III, Civilization IV for the start.
Have Fun
Stefan

Similar Messages

  • Game Demos For iMac?

    Hi,
    I'd really like to download some game Demos for my iMac, but I can't find any good ones. Why don't EA make downloadable demos available for their Mac games? I want to try out demos of games like Harry Potter and Need For Speed, to see what my iMac is capable of.

    Hi Reuben,
    sorry to say but EA seems to have no intention to release any Demos (at least at the moment).
    Demos you can tryout are: Age of Empires III; Civilization IV; Prey.
    IMHO, these do give quite a good impression of what the iMac is indeed capable.
    Have Fun
    Stefan

  • I can't play my PC game on my new iMac. What can i do?

    I can't play my PC game on my new iMac. What can i do?

    Buy Mac versions of the games, or
    Buy different games to play with, or
    Install Windows on your Mac.

  • How much RAM should I install for new iMAC ?

    Hi,
    How much RAM should I install for new iMAC* running Logic Studio? It comes with 4 GB - is that enough? (can you run in 64 bit mode..)
    *(The 21.5" 3.06GHz Intel Core 2 Duo)
    Also, I was planning to get the stock 1 TB Hard Drive & save projects to an external drive.
    Does that sound reasonable?
    Any other recommendations?
    Thanks,
    Wm Heart

    Unless you plan on running huge projects with enormous sampled instruments, 4 GB will do (very) fine. And your disk plan is sound. Choose an external Firewire drive, rather than USB. FW is easier on the CPU and can handle more tracks than USB.
    What you should get, instead of more memory, is a (24 bit) external audio interface, if you want to do serious recording and playback.
    What type of audio interface you'ld need, depends on what you want to do with it and of course your budget. From decent to brilliant costs from roughly 100 to several 1,000's of europounddollars. Avoid the 16 bit ones, they're worse than the inbuilt audio chip of your iMac. You can recognize 16 bit Audio Interfaces (in webshops) by their prize (often under 100€£$) and the lack of mention of their bitrate.
    HTH
    Regards, Erik.

  • Windows 7 or 8.1 for new iMac 27 in?

    Just got a new iMac 27 inch about a week ago.  I am new to Mac and still need to have access to Windows for some games and also want to use Office 2013 full MS version.  I have purchased Parallels 9 and am currently testing with Windows 8.1 Preview version.
    Now ready to purchase a full sytem builder Windows version to install and wondering which may be best, Windows 7 or newer Windows 8.1?  Are there that many improvements or new features in 8.1 that i should go with the newest version?  Has anyone else recently installed one of these with Parallels?
    Thanks!

    Just get Office for Mac instead of the Windows version, it doesn't make any sense at all to use the WIndows version. As for your games it doesn't matter what you get, Windoze is Windoze, just be prepared to keep it save by running anitvirus softare and any other tools you need to keep it running OK. Don't worry about the OS X side though, even if the WIndows side becomes diseased it will not affect OS X.

  • Games performance on new iMac?

    Hi all!
    I want to buy a mac, but!
    My brother and I like to play games like Oblivion, Stalker, Steam-games and other. We're waiting for a new powerful Macs from Apple and here they are!
    Now, the questions:
    - could You tell me about game performance on a new iMac with ATI 2600Pro Video card using or not Boot Camp and WinXP?
    Cuz, if the performance will be slow, then we should to buy a Mac Pro, which is a bit expensive
    Regards,
    Alex

    The_Tank wrote:
    The performance of the 2600pro card will not be sufficient to run the newest DX10 and latest DX9 games in the native screen resolution (which is 1080i aka 1920x1080).
    So you will either need to play at a lower resolution (which will not look good) or buy a MacPro or PC form gaming.
    Hmm not sure if your correct there tank. Acording to the ATI website it can. Now before someone says it I know that the info on there is for the pci express version but isn't it the same card inside the imac?
    Edit: Sorry tank just noticed you said native screen res ... I can imagine it would strugle at that res.
    Message was edited by: Rob Palmer4

  • Jumpy game play on new imac 21.5

    I have just purchased a new imac 21.5 with a radeon 4650 graphics card and am experiencing jumpy game play on WOW and other games (even simple games such as Farmville on Facebook) Let me know if someone could please give me some help. Thanks

    Welcome to Discussions, your signature says 10.6.1 you should update SL to 10.6.2 as there may have been some fixes for graphics.

  • Best Practices for new iMac

    I posted a few days ago re failing HDD on mid-2007 iMac. Long story short, took it into Apple store, Genius worked on it for 45 mins before decreeing it in need of new HDD. After considering the expenses of adding memory, new drive, hardware and installation costs, I got a brand new iMac entry level (21.5" screen,
    2.7 GHz Intel Core i5, 8 GB 1600 MHz DDR3 memory, 1TB HDD running Mavericks). Also got a Superdrive. I am not needing to migrate anything from the old iMac.
    I was surprised that a physical disc for the OS was not included. So I am looking for any Best Practices for setting up this iMac, specifically in the area of backup and recovery. Do I need to make a boot DVD? Would that be in addition to making a Time Machine full backup (using external G-drive)? I have searched this community and the Help topics on Apple Support and have not found any "checklist" of recommended actions. I realize the value of everyone's time, so any feedback is very appreciated.

    OS X has not been officially issued on physical media since OS X 10.6 (arguably 10.7 was issued on some USB drives, but this was a non-standard approach for purchasing and installing it).
    To reinstall the OS, your system comes with a recovery partition that can be booted to by holding the Command-R keys immediately after hearing the boot chimes sound. This partition boots to the OS X tools window, where you can select options to restore from backup or reinstall the OS. If you choose the option to reinstall, then the OS installation files will be downloaded from Apple's servers.
    If for some reason your entire hard drive is damaged and even the recovery partition is not accessible, then your system supports the ability to use Internet Recovery, which is the same thing except instead of accessing the recovery boot drive from your hard drive, the system will download it as a disk image (again from Apple's servers) and then boot from that image.
    Both of these options will require you have broadband internet access, as you will ultimately need to download several gigabytes of installation data to proceed with the reinstallation.
    There are some options available for creating your own boot and installation DVD or external hard drive, but for most intents and purposes this is not necessary.
    The only "checklist" option I would recommend for anyone with a new Mac system, is to get a 1TB external drive (or a drive that is at least as big as your internal boot drive) and set it up as a Time Machine backup. This will ensure you have a fully restorable backup of your entire system, which you can access via the recovery partition for restoring if needed, or for migrating data to a fresh OS installation.

  • Use older 2008 iMac as second monitor for new iMac

    Hi all,
    I have one of these older machines that has no real purpose
      http://support.apple.com/kb/sp485
    but would serve me very well as a second monitor for my brand spanking new iMac.
    The specs seem to note that there is a video output - but I'm not seeing anything about video IN.
    Is it possible to use this older iMac as a monitor?

    that looks cool, and there is a free trial.
    I am not keen on using the WiFi to do this - my old iMac has firewire but the new one doesn't.
    Besides using the ludicrously expensive Thunderbolt <-> Firewire 800 convertor
    http://store.apple.com/uk/product/MD464ZM/A/thunderbolt-to-firewire-adapter
    is there any other way to create a wired connection between these devices? I'm not sure if there is such a thing as a USB <-> USB network connection.

  • Cable to connect old iMac as second screen for new iMac

    Just bought the new iMac 27" with thunderbolt port.  I understand I can hook up my old iMac (24" Mid 2007) and use it as second monitor.  My challenge is confirming that, and then figuring out which cable to use. 
    The manual says the old iMac has a "Mini-DVI video out port", making it sound like it won't accept input.  True?
    If it will indeed accept input, what cable do I use to connect the two Macs?
    If indeed I can't use the second iMac, I'll purchase a separate monitor.  What should I look for in monitors that will easily attach to the thunderbolt-only new iMac?  I won't be buying the Apple monitor.
    Thanks for any help in advance.
    Bob

    Most new monitors will support standard DVI and VGA connections. Some may support Mini-DVI ports. That's about all I can tell you.
    As for other factors I would look at monitor reviews - as many as you can - for the size and resolutions in which you are interested. There are a lot of products out there. You might try first doing a Google search to learn more about the meanings of the various specs the manufacturers provide so you might wade through the smoke and mirrors in search of meaningful information.

  • Power converter required for new iMac?

    I have taken my new iMac to Germany. The provided power cord does not have a converter like the Mac laptops have. Do I need to purchase a power converter that will step down the voltage when plugging into the outlets in Germany, or is there a control on the computer to adjust for the increased voltage?

    To add additional clarification, I understand that I will need a plug adapter and have used one before without issue for my macbook laptop as the provided cord allows for switching the plug end to match the european outlets. The converter box on the cord (the white box) then steps down the voltage so the laptop can run safely being powered by the 220v outlet. The new desktop iMac, as I mention above, has a cord without the converter box. I am concerned that if i just use a plug converter, the computer will not be able to handle the additional voltage.

  • Suggestions for new iMac, hard drive and Thunderbolt vs FW800 vs USB3?

    Ordering a new iMac 27" and leaning toward fusion drive,  and wondering if anyone has any suggestion or experiance with this drive? Any suggestions for drives would be welcome.
    I am going to have to decide what to do as far as storage and I assume USB3 will be the best choice - been using FW800 and lots of new things coming.
    Thanks for any input and suggestions.
    Don

    anybody have any comments on the use of Thunderbolt vs USB3? I am using FW800 not and will be changing my 2 external drives. I have to keep FW800 on them so I am able to daisey-chain them. My use is normal and wondering if I should stay with USB3 & FW800 for external or make the TM drive a Thunderbolt. Those seem to be priced higher just wanted some suggestions, recommendations.
    Thanks,
    Don

  • Line-in mic for new iMac.

    I'm like 2-days new to mac-using so stay with me here.
    I just got the new iMac 24" 2.4ghz.
    I'm having a hard time getting my Logitech standard-in (non-USB) mic to work. The headphones work while plugged in, but the mic doesn't seem to be working. I can get the mic to work on my PC, but I don't have any other mics to try on this Mac.
    Anyway: I go System Preferences-> Sound-> Input.
    When the built in mic is selected the input level will display incoming sounds. But when I switch over to the line-in with my mic plugged into the line-in I get nothing. Do I maybe have to allow access for this jack to work?
    My mic is not muted.
    If it means anything: when I am unplugging the mic the input level will display some incoming sound, but only right after jacking-out (hehe). I was able to playback the sound that was being input and it just likes like a book was dropped on the floor. Not anything loud, just a short soft "thud".
    I appreciate all ideas, thanks.

    The audio-in port on Mac computers requires a line level input. Most PC mics don't work with a Mac unless you run them through a preamp, such as iMic, to boost the signal to line-level.

  • ¿I need antivirus for new iMac (2012)?

    It's my first Mac. I want to say if antivirus is necessary in the 2012 new iMac (21'5 ").
    If I need one, tell me about the best antivirus and where I download it, please.
    Thanx!

    This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an attacker who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files. The recognition database is automatically updated once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders. In most cases, there’s no benefit from any other automated protection against malware. Starting with OS X 10.7.5, there has been another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be sure that it hasn't been modified by anyone other than the developer. His identity is known, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
    Note, however, that there are some caveats concerning Gatekeeper:
    It can be disabled or overridden by the user.
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    For more information about Gatekeeper, see this Apple Support article. That being said, the best defense against malware is your own intelligence. All known malware on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. If you're smarter than the malware attacker thinks you are, you won't be duped. That means, primarily, that you never install software from an untrustworthy source. How do you know a source is untrustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn users who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    “Cracked” copies of commercial software downloaded from a bittorrent are likely to be infected.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. No intermediary is acceptable.
    Java on the network (not to be confused with JavaScript, to which it's not related) is a weak point in the security of any operating system. If a Java web plugin is not installed, don't install it unless you really need it. If it is installed, you should disable it (not JavaScript) in your web browsers. Few websites have Java content nowadays, so you won’t be missing much. This setting is mandatory in OS X 10.5.8 or earlier, because Java in those obsolete versions has known security flaws that make it unsafe to use on the Internet. The flaws will never be fixed. Regardless of version, experience has shown that Java can never be fully trusted, even if no vulnerabilities are publicly known at the moment.
    Follow these guidelines, and you’ll be as safe from malware as you can reasonably be.
    Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability and poor performance.
    By modifying the system, the software itself may create weaknesses that could be exploited by malware attackers.
    ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. Using it to delete or move email messages can corrupt the Mail database. Such messages must be deleted from within the Mail application. ClamXav is not needed for protection against OS X malware. It's useful only for detecting Windows malware. If you don't need to do that, avoid it. Windows malware can't harm you directly. Just don't pass it on to anyone else.
    It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, like a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use.

  • Will I need to buy bigger external HD for new iMac?

    I have had my trusty iMac (the snowball one) for 6+ years now and have loved it dearly. It has an 80gig hard drive that is about three quarters full. I have other things stored on an external hard drive, and have been using a 200gig external for Time Machine.
    Anyway, I am about to splurge on a new iMac. Going for the 21.5 inch one, but putting 2T hd in it and as much ram as possible.
    My question is: what will time machine need for back up? For the past few years I have been using a 200gig external for Time Machine (I also have a 500g one for extra photos and music). It will be quite a while before I have even 100 gigs of stuff to back up with Time Machine. So can I continue to use the 200 gig external for TM? Should I use the 500gig instead? Or am I going to have to buy a new external to equal the 2T?
    For what it is worth, I plan to keep my snowball iMac and use it to store some documents or photos that I do not need to access often?
    Many thanks in advance.
    Jane

    Hi Jane,
    Pondini has made excellent FAQs for Time Machine to be found here http://web.me.com/pondini/Time_Machine/FAQ.html
    Quote from it:
    +"A general "rule of thumb" is, TM needs 2 to 3 times as much space as the data it's backing-up (not necessarily the entire size of your internal HD).+
    +But this varies greatly, depending on how you use your Mac. If you frequently add/update lots of large files, then even 3 times may not be enough. If you're a light user, 1.5 times might do. Unfortunately, it's rather hard to predict, so if in doubt, get a bigger one!"+
    Endquote.
    So, it seems to me that using your 500GB external HD for Time Machine should be sufficient for your useage.
    Hope it helps
    Stefan
    Message was edited by: Fortuny

Maybe you are looking for