Gamers Macbook: Ok for the Macbook to stay on for hours?
Hi, I have recently found a new obsession. A role playing game that I am addicted to over the holidays while I was off for a week. I leave my Macbook on for hours at a time sometime (over 12hrs, day after day). I know that this isn't a gamers laptop, and was wondering what was the worst that could happen from me doing this? TIA.
Overheating and unexpected shutdown if there is improper ventilation around the machine, or if the machine's power manager is marginal. Backup your data frequently also, as shutdowns can both damage the directory, and lose data of work in progress.
If you notice the machine getting excessively hot, put it on a surface that dissipates heat better such as metal. Just be sure it is properly grounded first, as to not exhibit electric shock when you touch it.
Similar Messages
-
When i turn on my macbook a box appears telling me i need to restart my computer (in different languages) and in order to do so i have to press on the off button for a lil while. Even after doing this the same box appears and it never restarts correctly. This box appears every single time. I rarely turn my computer off. I just place it on sleep mode and restarts it only when i get prompted to. I brought it to genius and they couldnt figure out what the problem is so i was told it needed to be shipped to get fixed. I didnt have anything backed up. All i want saved are the pictures because i went to 2 events where i was the assigned photographer and i didnt get to save it to an external memory. Genius said that when shipped i cant give instructions like make sure to save the pictures and if they are unable to, call me if they should go on with the process. I was wishful thinking that to fix the problem they might not even have to touch the pictures memory part. I brought my MBP back home hoping it will miraculously starts and id be able to back it up but now all it does when i turn it on is the screen remains gray with the apple symbol and the circle timer below. The screen stays this way even if i leave it on for hours. Please help me fix this!!! cant i really specify to the technicians at apple to please make sure not to erase the pictures? Is there no other way to turn on my mac? I only need it to work ones.
There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit -
My Macbook is not playing sound unless i have headphones in. The light in the headphone port stays on even when they are not plugged in. How can i fix this?
You might need to clean the headphone port (I was in the same situation and this worked for me). Dirt, dust, and debris accumulate in the port and eventually the computer registers the debris as headphones being plugged in. After cleaning the issue was resolved.
-
I want to install xp on my MacBook Pro with i5 processor, but that creates the partition and restart the computer just stays in the following message: The Setup is inspecting your hardware configuration of your computer, someone can help me with this ?
The answer has not changed since your last post here https://discussions.apple.com/thread/3230576?tstart=0
There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410. -
during last weeks, from time to time, when I connect my macbook it stays long time with the color wheel turning around. Finally I have to hard-reset. Any clue?
It's Mac OS X 10.7.3It's Mac OS X 10.7.3
The startup disk may need repairing.
Use Lion Recovery for that. -
Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?
Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!
This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
It constantly gets harder. -
My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Question
I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! It's almost as if something is blocking it ffrom completing the process. Please helpNext time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.
-
My MacBook Air will not turn on. I get a white screen with the apple logo and a spinning star (search icon). It will spin for hours and never go away unless I power off.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
After updating to mavericks on my MacBook, the screen keeps saying "setting up your mac." It has been like this for hours! How can I make it go faster? It's has been like this for 4 hrs.
I don't think your mac is setting up. It's stuck.
I would:
hold the power button until it shuts down
unplug all peripherals
do a safe boot (restart and hold down the shift key until you see the apple logo).
If it starts up in a safe boot, then you can try restarting with a normal boot.
If it does not start with a normal boot, then you probably have some incompatible third party software. Likely culprits are:
MacKeeper
CleanMyMac
third-party antivirus software
any other "cleaning" or "optimizing" or similar third party "utilities".
A good place to start would be to uninstall any of those (while in safe mode) and then restart. -
HELP!! Macbook wont stay connected automatically to wifi? why?
I live in apartments with tons of wifi signals. I have a secured wifi and no matter how many times i enter my password and everything my macbook wont stay connect automatically to my home wifi.
I have to use diagnostic assistance every time to connect to my wifi. It wont work. I have read some of these other forums but the suggestions don't work. Tried adding unsecured wifi signals to preferred and move to bottom and mine to top. no luck. I don't understand the DNS option so i didn't try it. PLEASE HELP SOMEONE, ANYONE
THANKS!When you live in an area with lots of wifi signals you are in a situation that may cause degradation to your own wifi network.
When the 54g channels were created it turned out only 3 of those channels can be used, 1, 6 or 11.
all the other channels bleed.
So you should use a wireless sniffer such as air radar
Then look for the 3 strongest signals that are close to you. Then change the channel your wifi is broadcasting on to channel number 1, 6 or 11.
Unfortunately you may find that no matter what channel you use you are going to be close to someone else on the same channel.
The solution is to upgrade your network to a wireless N network. Using the 5ghz high band channels you have many more channels to use.
regarding your network diagnostics dont list any other network other than your own in the preferred networks. Regarding DNS your router should automatically assign a dns server. -
Start-up problem with my Macbook - light stays on and screen stays black?!
Hi, sometimes when I start up my Macbook the switch-on light stays on and the screen stays black. Then I have to turn it off and when I restart it boots normally. What can this be? I resetted already the PRAM and the firmware is up to date. Perhaps someone understands german. Therefore I added my german post... Many thanks in advance!
Hi, hab ein seltsames Phänomen. Manchmal, vor allem nach ausgeschaltetem Zustand über Nacht, leuchtet nach dem Einschalten das Einschaltlicht auf und geht nicht wieder aus, wie normal wenn das Macbook startet, sondern bleibt an und der Bildschirm bleibt schwarz. Dann schalte ich das Macbook mit dem Ausschaltknof aus und warte ein paar Sekunden und schalte es dann wieder ein. Daraufhin startet es ganz normal. Woran könnte das liegen? Hab schonmal PRAM resettet und die Rechte auch repariert. Der Hardwaretest zeigt auch keine Probleme an. Kann man(n) noch irgendwie überprüfen, woran das liegen könnte oder hat das Problem auch schonmal jemand gehabt? Mein Macbook ist gradmal 2 Monate alt und hat das Problem erst seit kurzem. Könnte das vielleicht auch an einer Software liegen, die ich installiert habe. Kann sowas auch Auswirkungen auf den Bootvorgang haben? Bin Laie und würde gern wissen, ob sowas auch an der Pufferbatterie oder einer kalten Lötstelle liegen kann oder könnte das Macbook da dann gar nicht starten. Wäre für jeden Vorschlag dankbar... Vielen Dank schonmal im voraus!Hi,
put me on the list as well. I was already in contact with ADC and it seems to me that they acknowledged it as a bug. I'm using a Mini-DVI-to-VGA adapter. And sporadically when unplugging it the internal display stays black or switches to the blue background and hangs there.
As I heard from friends who are using the Mini-DVI-to-DVI adapter in the same use case, this doesn't happen to them.
MB (CD 2 GHz), PB G4 15" (1.67 GHz), Mac Mini (1.66 GHz Core Duo) Mac OS X (10.4.8) iPod color 60 GB, iPod 1G nano 4 GB, iPod 1G shuffle 1 GB -
My macbook wont except my administrator name even after I reset my admin pasword and keychain login password so I am unable to install or make any account changes. I can't even install any software. Suggestions anyone? I've been at this for hours now....
Try Resetting the PRAM
Maybe you are looking for
-
Using C# instead of pl/sql in a CLR stored procedure, benefits?
Hello dear experts, I was just playing around with C# and a little stored procedure I deployed to my Oracle 11. My questions are: Is it possible to call this "CLR c#" stored procedure in a different way than I call a standard pl/sql stored procedure
-
My Photoshop Elements 12 is downloading two copies of each photo and there is no Automatically Stack RAW and JPEG Option in the Download Box.
-
How do I "restore" a Mailbox from an archive?
I know how to Archive a Mailbox (Mail > Mailbox > Archive Mailbox > choose a location to store the archive file) and it works. But how do I restore a Mailbox from this archived file? I have not found ANY reference in the help menu about what to do wi
-
It's connected properly, drivers are installed, but I can't run any games, it says failed to initialize renderer. Piriform speccy shows 16MB VGA Adapter as a graphic device. Please help.
-
Hello, I have my SAP installed and running fine. In Control Centre I try to add "New System" and try to "Discover". Its failing saying "CCA1003I No DB2 system was found on the network." I thought this is because DAS is not Present. I try to create i