GarageBand Super Size Me
Is there a way to enlarge the size of a GarageBand session, similar to what happens when one uses Command + to increase the size of a Safari Browser or Word Document? I've noticed I can't do this with GarageBand and I'd like to enlarge my GB sessions when connecting my laptop via external HDTV monitor.
To clarify, I'm not talking about the e x p a n s i o n that occurs by clicking the green dot, or the lower right-hand corner grab.
monasmee wrote:
I've since noticed that the Control/Two-Finger results in GarageBand pixelating at some point, whereas Command + doesn't pixelate nearly as quickly with other programs such as this Safari webpage.
Because the Command + function doesn't work with GarageBand, is there a way to use both the Control/Two-Finger in moderation, and, use some enlargement settings on an external video monitor to avoid pixelation?
You might be able to get some more "juice" out of the zoom with what you describe. Not sure though - you'd probably have to experiment to see what works best for you on your equipment.
Also, the Universal Access Zoom function might work better as well. Now that you know what the squiggly key is, you could see if you get better results with that.
Good luck!
Similar Messages
-
Why do facebook, myyearbook, and gmail go to super size fonts when loaded in FF 7 or 8?
I cannot use Facebook, myyearbook, or my Gmail! When I load them the fonts go to super size and I get only a 1/4 page on a 19" monitor! It renders those sights usless!
Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages -
I imported multiple WAV audio files into a garageband project, totally about 20 minutes of 10 track audio. I then edited the project down so that it ended up being about 4 minutes of audio. When I save it, the "package contents" of the garageband files include the original WAV files that I imported at their full 20 minute size. Is there a way to save the file in such a way that it only retains the audio for the 4 minute finished product?
mvanpatter wrote:
Is there a way to save the file in such a way that it only retains the audio for the 4 minute finished product?
http://www.bulletsandbones.com/GB/GBFAQ.html#filesizedoesntchange
(Let the page FULLY load. The link to your answer is at the top of your screen) -
my iphone 6plus display zoomed to a super size so much so I can't even log on now or get to the controls. How do I correct this?
My iPhone 5 did the same thing. Real pain if you restart. Does not change anything if you reset.
Go to settings, general and accessibility to turn of oversize text. -
Why Can't I Export to Quicktime from Garageband?
Has anyone else experienced this or would know how to fix it...
I created a .mov file from Keynote and brought it into Garageband as a Video Track to sync the music to the Keynote presentation. Now I'm ready to Export to Quicktime from Garageband. When I choose the Export command from the 'Share' menu in Garageband, it runs through two dialog boxes - first "Creating Mixdown" and then "Converting..." - after the second dialog box disappears no Quicktime file is created.
I have tried several things to remedy this, but have had no luck - such as updating to Garageband 3.0.1, running Disk Utility, restarting the computer. I also made sure to check the Preferences in Garageband before exporting.
Can anyone tell me how I can get it to export?
Also, the final Garageband file size is approximately 180MB and the presentation runs approximately 8 minutes. The final file will need to be 'full quality', as it will be shown from a projector at a meeting.
Mac OS X (10.3.9) Keynote v3.0.0; Garageband v3.0.1; Dual 1GHz G4; 1.5GB SDRAMWhich export did you use?
Try going into prefs->export, enable the export to disk option.
Than in the Share menu choose export to disk.
Then do a search on the name of your song (in the Finder) and see if it shows up. -
'''bold text'''When Firefox is open, email message opens in Firefox in super-size and difficult to use.
Remedies tried at suggestion of another technician:
Reduced zoom level in F.
Opened in safe mode & checked square icon in top right corner
Reset toolbars and controls in safe mode
Uninstalled and reinstalled
Tried restore defaults
Ticked all options in Safe Mode and clicked "Make Changes & Restart"
Pressed F11 on keyboard
Right clicked on F icon & clicked compatability option.
Fixed one problem
Statement : "Firefox is incompatabile"; did not fix; couldn't see any way to fix.
Note: when I used Firefox before, my operating system was Windows XP. On one window, there was a reference to Windows XP but no way shown to fix.
Friends, I have been struggling with this problem for serveral weeks and many hours. Internet Explorer has become a nightmare and I need to use Firefox. With all respect, it seems to me the reputation of the organization is at stake. Help!
One last question: is there someone I can trust who could take over my computer and solve this? Thank you!!!!!'''bold text'''When Firefox is open, email message opens in Firefox in super-size and difficult to use.
Remedies tried at suggestion of another technician:
Reduced zoom level in F.
Opened in safe mode & checked square icon in top right corner
Reset toolbars and controls in safe mode
Uninstalled and reinstalled
Tried restore defaults
Ticked all options in Safe Mode and clicked "Make Changes & Restart"
Pressed F11 on keyboard
Right clicked on F icon & clicked compatability option.
Fixed one problem
Statement : "Firefox is incompatabile"; did not fix; couldn't see any way to fix.
Note: when I used Firefox before, my operating system was Windows XP. On one window, there was a reference to Windows XP but no way shown to fix.
Friends, I have been struggling with this problem for serveral weeks and many hours. Internet Explorer has become a nightmare and I need to use Firefox. With all respect, it seems to me the reputation of the organization is at stake. Help!
One last question: is there someone I can trust who could take over my computer and solve this? Thank you!!!!! -
Why does font size automatically change
For my church work, I have created mini-presentations with lyrics. I then copy them into my service master. A number of times the font dramatically increased in size from the the file I am copying into the master. I mean like from 28pt Helvetica to 108pt Helvetica. I can go back and manually change it. But its a pain and just not right. W
Copying them into same version of Keynote (6). Open up the source file. Highlight the slides. Drag them over (they nicely fold into one sort of pile .. nice effect). Put them where I want them to go. POW, the font goes super-size ... but not always. Let me modify that ... not all my songs do it. I need to do some experimenting around to see if the same files do it all the time. I have a library of 75-100 songs so I need to do some testing on purpose. Don't know if it make a difference but I created most of them on my iPad and then work with them on my Mac. But compatability was the main point of Keynote 6 .. or at least I thought.
-
Super zoomed-up screen display
Hi everybody,
While listening to a web radio transmission, I fell asleep and must have pressed some wrong buttons on the keyboard. The screen is now super zoomed up. For instance, one single icon in the dock covers the entire screen!
When force quitting and restarting the computer, it opens up as normal and I see the standard screen for a second, but then it zooms up again right away to this super size.
What to do now?Hi Tomas!
Go to System Preferences/Universal Access and disable Zoom! -
Error in the standard htmlb.jar from EP6 SP9 (HTMLx)
I've successfully migrated my custom developed applications from EP5 SP5 to EP6 SP9. I've used the well known 3rd party
HTMLxframework for the DatePicker and Locale corrections only (I am a brazilian developer).
In the org.sapportals.htmlb.rendering there is a class named RenderUtil.
This class has two places with this specific code:
ResourceBundle r = ResourceBundle.getBundle("java.text.resources.LocaleElements", locale);
Which is very wrong as the "java.text.resources.LocaleElements" is available only until j2sdk 1.3. In the EP5 that runs under 1.3 there's no problem but EP6 uses j2sdk 1.4 and this packages has been relocated from the standard package to a "ext" (extension) package and been renamed as "sun.text.resources.LocaleElements".
So, as HTMLx uses this RenderUtil class, I had to decompile the original from the htmlb.jar using JAD and corrected the above line with the following new line or code:
ResourceBundle r = ResourceBundle.getBundle("sun.text.resources.LocaleElements", locale);
More than that, I had to change several places of the HTMLx's HxInputFieldRenderer to reflect the class name changes made to the CSSs of the EP6. In the new version SAP does not open a pop-up window for the DatePicker. Instead they chose to rewrite it as a dynamic layer. So the HTMLx code has to change to reflect that.
Here follows the workaround version of HxInputFieldRenderer.java (notice that some strings are not internationalized, I just copied and pasted the parts I needed, so it's not a definitive version, but will help you get a clue of what to do):
* HxInputFieldRenderer.java
* Copyright (C) 2003 Alan Hobbs
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
package org.open.sapportals.htmlx.rendering;
import javax.servlet.jsp.PageContext;
import org.open.sapportals.htmlx.HxField;
import org.open.sapportals.htmlx.HxInputField;
import org.open.sapportals.htmlx.HxLocaleUtil;
import com.sapportals.htmlb.Component;
import com.sapportals.htmlb.Form;
import com.sapportals.htmlb.InputField;
import com.sapportals.htmlb.enum.DataType;
import com.sapportals.htmlb.enum.InputFieldDesign;
import com.sapportals.htmlb.enum.ResourceType;
import com.sapportals.htmlb.rendering.DefaultInputFieldRenderer;
import com.sapportals.htmlb.rendering.IPageContext;
import com.sapportals.htmlb.type.AbstractDataType;
import com.sapportals.htmlb.type.DataDate;
import com.sapportals.htmlb.type.DataString;
import com.sapportals.htmlb.type.Date;
import com.sapportals.portal.prt.component.IPortalComponentRequest;
import com.sapportals.portal.prt.component.IPortalComponentResponse;
import com.sapportals.portal.prt.logger.ILogger;
import com.sapportals.portal.prt.runtime.PortalRuntime;
import com.sapportals.portal.prt.service.urlgenerator.IUrlGeneratorService;
import com.sapportals.portal.prt.service.urlgenerator.specialized.IPortalUrlGenerator;
import com.sapportals.portal.prt.service.urlgenerator.specialized.ISpecializedUrlGenerator;
* @author Alan.Hobbs
* To change the template for this generated type comment go to
* Window>Preferences>Java>Code Generation>Code and Comments
* Render the HxInputField.
* Version Date Author Description
* 0.1.0 1-Aug-2003 AHobbs Origional
* 0.1.0 4-Aug-2003 AHobbs Added resource bundle
* 0.1.1 6-Aug-2003 AHobbs Write hidden fields to store the locale
* 0.1.1 8-Aug-2003 AHobbs Don't show the date picker button if the field is disabled
* 0.1.2 10-Aug-2003 AHobbs Only generate the month and day name javascript once per form
* 1.1.0 1-Apr-2004 AHobbs Added render methods to allow a HTMLB InputField
* to be used instead of a HxInputField
* 1.1.0 6-Apr-2004 AHobbs Changed the names for the hidden fields to "_HTMLX_xxxxx"
* 1.1.0 20-Apr-2004 AHobbs Allow debug code to be written to the console with System.out.println()
* 1.3.0 4-May-2004 AHobbs Added PopUp rendering
public class HxInputFieldRenderer extends DefaultInputFieldRenderer {
protected ILogger m_logger = PortalRuntime.getLogger("htmlx");
private static boolean writingDebugToConsole;
public HxInputFieldRenderer() {
super();
public void render(Component component, IPageContext pc)
m_logger.info("Entry: HxInputFieldRenderer.render()");
if (!(component instanceof HxInputField)) {
m_logger.warning(
"HxInputFieldRenderer.render() component is not instanceof HxInputField " +
"(component.getClass().getName()='" + component.getClass().getName() + "')");
return;
HxInputField inf = (HxInputField)component;
DataType type = inf.getType();
if (writingDebugToConsole) {
System.out.println("Start rendering HxInputField (id='" + inf.getId() + "') ...");
m_logger.info(" id='" + inf.getId() + "'");
m_logger.info(inf.toString());
/* Only include for PDK version 5.0.5.0 and above - may not be required ???
// m_logger.info(" VersionInfo.getVersion()='" + VersionInfo.getVersion() + "'");
// if (VersionInfo.?????) {
// if (pc.isUsingSession() && !inf.isVisible() && inf.getParkInSession()) {
// String uniqueName = pc.getParamIdForComponent(inf);
// Object value = inf.getValue();
// String valueString = null;
// if (value != null) {
// if (value instanceof AbstractDataType) {
// AbstractDataType dataValue = (AbstractDataType)value;
// if (dataValue != null)
// if (dataValue.isValid())
// valueString = dataValue.toString(pc);
// else
// if (dataValue instanceof DataString)
// valueString = dataValue.toString(pc);
// else
// valueString = dataValue.getValueAsString();
// else {
// valueString = value.toString();
// else {
// valueString = "";
// pc.getParamList().put(uniqueName, valueString);
// return;
boolean showDateHelp = false;
if (DataType.DATE.equals(type)
&& inf.isShowHelp()
&& !inf.isDisabled()) {
showDateHelp = true;
boolean showPatternHint = false;
if (inf.isShowPatternHint()
&& (DataType.DATE.equals(type)
|| DataType.TIME.equals(type))
|| ((inf.getPatternHint() != null) && (inf.getPatternHint().length() > 0))) {
showPatternHint = true;
boolean showStatusMsg = false;
if (inf.isShowStatusMsg() && (inf.getStatusMsg() != null) && (inf.getStatusMsg().length() > 0)) {
showStatusMsg = true;
if (showDateHelp || showPatternHint || showStatusMsg) {
pc.write("<table cellspacing="0" cellpadding="0" border="0" id="");
pc.write(""><tr><td>");
String uniqueName = pc.getParamIdForComponent(inf);
if (inf.isVisible()) {
pc.write("<span id="");
pc.write(uniqueName);
pc.write("-r" class="urEdfHelpWhl">");
if (inf.isPassword())
pc.write("<input type="password" class="sapEdf");
else
pc.write("<input type="text" class="sapEdf");
if (inf.isInvalid())
pc.write("i");
if (inf.isRequired())
pc.write("Req");
else
pc.write("Txt");
if (inf.isDisabled())
pc.write("Dsbl");
else
pc.write("Enbl");
if (inf.getDesign() == InputFieldDesign.SMALL)
pc.write("Sml");
pc.write("" autocomplete="off");
int mySize = inf.getSize();
if (mySize > 0) {
pc.write("" size="");
pc.write(mySize);
int maxlength = inf.getMaxlength();
if (maxlength > 0) {
pc.write("" maxlength ="");
pc.write(maxlength);
java.lang.String value = inf.getWidth();
if (value != null && !"".equals(value)) {
pc.write("" style="width:");
pc.write(value);
pc.write(";");
java.lang.String tooltip = inf.getTooltip();
if (tooltip != null) {
pc.write("" title="");
pc.writeEncoded(tooltip);
pc.write(" onchange="return htmlbDoEvent(this,'TV','onchange','0','");
pc.write(uniqueName);
pc.write("',1,1,'',0);" ");
pc.write(" onblur="return htmlbDoEvent(this,'TV','onblur','0','");
pc.write(uniqueName);
pc.write("',1,1,'',0);" ");
if(inf.isDisabled())
pc.write("" readonly="");
else {
pc.write("<input type="hidden");
pc.write("" name="");
pc.write(uniqueName);
if (inf.isLabeled()) {
pc.write("" id="");
pc.write(uniqueName);
Object value = inf.getValue();
pc.write("" value="");
if (value != null) {
String valueString = null;
if (value instanceof AbstractDataType) {
m_logger.info("-- Abstract Data Type");
AbstractDataType dataValue = (AbstractDataType)value;
if (dataValue != null) {
m_logger.info("-- dataValue != null");
if (dataValue.isValid()) {
m_logger.info("-- dataValue.isValid()");
if (dataValue instanceof DataDate) {
m_logger.info("-- dataValue instanceof DataDate");
Date date = ((DataDate)dataValue).getValue();
valueString = HxLocaleUtil.formatDate(date, pc.getLocale());
else {
m_logger.info("-- NOT dataValue instanceof DataDate");
valueString = dataValue.toString(pc);
else if (dataValue instanceof DataString) {
m_logger.info("-- dataValue instanceof DataString");
valueString = dataValue.toString(pc);
else {
m_logger.info("-- dataValue.getValueAsString()");
valueString = dataValue.getValueAsString();
else {
// Not Abstract Data Type
m_logger.info("-- Not Abstract Data Type");
valueString = value.toString();
pc.writeEncoded(valueString);
pc.write(""/>");
if (showDateHelp) {
String dateFormat = HxLocaleUtil.getSapDatePatternNumber(pc.getLocale());
pc.write("</td><td align='left'><button id='");
pc.write(uniqueName);
pc.write("-btn' type="button" tabindex="-1" ti="-1" class="urEdfHlpDate" onclick="htmlb_showDateHelp(event,'");
pc.write(uniqueName);
pc.write("','");
pc.write(dateFormat);
pc.write("','1')"></button>");
pc.write("<script>htmlb_addTexts('pt_BR',{SAPUR_OCTOBER:"Outubro",SAPUR_MSG_LOADING:"Processo de carga em andamento"," +
"SAPUR_SUNDAY_ABBREV:"Do",SAPUR_F4FIELD_TUTOR:"Pressionar F4 para exibir as entradas possíveis"," +
"SAPUR_INVALID:"Não válido",SAPUR_FEBRUARY:"Fevereiro",SAPUR_F4FIELD:"F4- campo de entrada"," +
"SAPUR_FRIDAY_ABBREV:"6ª",SAPUR_WEDNESDAY_ABBREV:"4ª",SAPUR_MAY:"Maio",SAPUR_MSG_WARNING:"Advertência"," +
"SAPUR_DECEMBER:"Dezembro",SAPUR_SEPARATOR:"-",SAPUR_MSG_SUCCESS:"Com êxito",SAPUR_SATURDAY_ABBREV:"Sa"," +
"SAPUR_THURSDAY_ABBREV:"5ª",SAPUR_MSG:"{0} {1} {2}",SAPUR_BUTTON_WHL:"{0} - {1} - {2} - {3}",SAPUR_JULY:"Julho"," +
"SAPUR_APRIL:"Abril",SAPUR_FIELD_TIME:"Hora",SAPUR_MSG_ERROR:"Erro",SAPUR_REQUIRED:"Necessário"," +
"SAPUR_BUTTON_WHL3:"{0} - {1} - {2}",SAPUR_SEPTEMBER:"Setembro",SAPUR_NOVEMBER:"Novembro",SAPUR_AUGUST:"Agosto"," +
"SAPUR_JANUARY:"Janeiro",SAPUR_BUTTON:"Botão",SAPUR_FIELD_PW:"Senha",SAPUR_FIELD:"Texto editável"," +
"SAPUR_DISABLED:"Não disponível",SAPUR_FIELD_DATE:"Data",SAPUR_MARCH:"Março",SAPUR_FIELD_NUMBER:"N°"," +
"SAPUR_MSG_STOP:"Stop",SAPUR_BUTTON_WHL4:"{0} - {1} - {2} - {3}"," +
"SAPUR_BUTTON_ENABLED:"Para ativar, utilizar a barra de espaço",SAPUR_TUESDAY_ABBREV:"3ª",SAPUR_READOLNY:""," +
"SAPUR_MSG_JUMPKEY:"Pressionar a barra de espaço para navegar para o campo correspondente",SAPUR_JUNE:"Junho"," +
"SAPUR_MONDAY_ABBREV:"2ª"});</script>");
if (showPatternHint) {
String pattern = "";
String patternTooltip = "";
if (DataType.DATE.equals(type)) {
pattern = HxLocaleUtil.getDatePatternInLocaleLanguage(pc.getLocale());
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.DatePatternTooltip", pattern);
else if (DataType.TIME.equals(type)) {
pattern = HxLocaleUtil.getTimePatternInLocaleLanguage(pc.getLocale());
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.TimePatternTooltip", pattern);
pattern = " " + pattern;
else if ((inf.getPatternHint() != null) && (inf.getPatternHint().length() > 0)) {
pattern = " " + inf.getPatternHint();
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.PatternTooltip", pattern);
pc.write("</td><td align='left'>");
pc.write("<span class='sapTxtLeg' title='" + patternTooltip + "'><nobr>");
pc.write("<font color='666666' face='Microsoft Sans Serif' style='vertical-align:super' size='1'><b>" + pattern + "</b></font>");
pc.write("</nobr></span>");
if (showStatusMsg) {
if (inf.getStatusMsgPosition().equalsIgnoreCase("RIGHT")) {
pc.write("</td><td align='left'>");
pc.write("<font color='990000' face='Microsoft Sans Serif' size='1'>");
else if (inf.getStatusMsgPosition().equalsIgnoreCase("BELOW")) {
pc.write("</td></tr><tr>");
if (showDateHelp && showPatternHint) {
pc.write("<td align='left' colspan='3'>");
else if (showDateHelp ^ showPatternHint) { // '^' is Exclusive OR (XOR)
pc.write("<td align='left' colspan='2'>");
else {
pc.write("<td align='left'>");
pc.write("<font color='990000' face='Microsoft Sans Serif' style='verticle-align:super' size='1'>");
pc.write("<nobr>" + inf.getStatusMsg() + "</nobr>");
pc.write("</font>");
if (showDateHelp || showPatternHint || showStatusMsg) {
pc.write("</td></tr></table>");
// Generate code to store the current Locale in the HTML form,
// and make the month and day names available in javascript arrays.
// The form's Language attribute is used as a flag so that this is only
// done once for each form.
Form form = pc.getCurrentForm();
if ((form.getLanguage() == null)
|| (!form.getLanguage().equals(pc.getLocale().toString()))) {
// Save the locale in the html form as hidden fields so that the
// same locale can be used to parse returned data.
pc.write("<input type="hidden" name="_HTMLX_LANGUAGE_" value="" + pc.getLocale().getLanguage() + "">");
pc.write("<input type="hidden" name="_HTMLX_COUNTRY_" value="" + pc.getLocale().getCountry() + "">");
pc.write("<input type="hidden" name="_HTMLX_VARIANT_" value="" + pc.getLocale().getVariant() + "">");
// Write javascript arrays of month and day names in the locale language
StringBuffer sb = new StringBuffer(250);
String javaScriptPath = pc.getJavascriptPath();
sb.append("var javaScriptPath='");
sb.append(javaScriptPath);
sb.append("';");
java.lang.String dayNames[] = RenderUtil.getDayAbbreviations(pc.getLocale());
if (dayNames.length != 7) {
throw new IllegalStateException("Only locales with 7 days are supported!");
sb.append("var htmlbDayNames = new Array('");
for (int i = 0; i < 6; i++) {
sb.append(dayNames<i>);
sb.append("','");
sb.append(dayNames[6]);
sb.append("');n");
sb.append("var htmlbMonthNames = new Array('");
java.lang.String monthNames[] = RenderUtil.getMonthNames(pc.getLocale());
for (int i = 0; i < 11; i++) {
sb.append(monthNames<i>);
sb.append("','");
sb.append(monthNames[11]);
sb.append("');n");
java.lang.String jscript = sb.toString();
pc.getDocument().getIncludes().addBodyEndResource(ResourceType.DIRECTJSCRIPT, "HTMLB_INPUTFIELD_DATEHELP", jscript);
// Set the language in the form so we don't do this again
form.setLanguage(pc.getLocale().toString());
if (writingDebugToConsole) {
System.out.println("Finished rendering HxInputField (id='" + inf.getId() + "')");
m_logger.info("Exit: HxInputFieldRenderer.render()");
// Methods to allow the Standard HTMLB InputField to Mimic HxInputField
// The key idea here is to use the standard InputField ONLY as a String
// field (never Date) so that we have total control over the display format
// and then HTMLX looks after ofrmating the string, abd displaying the
// help icons, status messages etc.
* Render the HTML placed before a HTMLB InputField, an InputField,
* and the code placed after the InputFIeld, so that it behaves like a
* HTMLX HxInputField
* @param field
* @param pc
public static InputField mimicRender(HxField hxField, IPageContext pc) {
HxInputField hxInputField = new HxInputField(hxField, pc.getLocale());
return mimicRender(hxInputField, pc);
* Render the HTML placed before a HTMLB InputField, an InputField,
* and the code placed after the InputFIeld, so that it behaves like a
* HTMLX HxInputField
* @param field
* @param pc
public static InputField mimicRender(HxInputField hxInputField, IPageContext pc) {
// Render stuff before InputField
renderBeforeInputTag(hxInputField, pc);
// Render InputField
InputField inputField = new InputField(hxInputField.getId());
setUpInputField(hxInputField, inputField, pc);
// This is a kludge to make a field read only. It is achieved by
// adding the flag to the 'width' attribute. HTMLB then unknowingly
// adds the flag when it renders the 'width' attribute.
if (hxInputField.isReadOnly()) {
inputField.setWidth( inputField.getWidth() + ";" readonly="");
inputField.render(pc);
String uniqueName = pc.getParamIdForComponent(inputField);
String popUpKeyUniqueName = "";
// If the field has a Pop Up add a hidden field for the Key populated by the Pop Up
if (hxInputField.isShowPopUp()) {
InputField keyInputField = new InputField(hxInputField.getId() + "PopUpKey");
keyInputField.setVisible(false);
keyInputField.setValue(hxInputField.getPopUpKeyValue());
keyInputField.render(pc);
popUpKeyUniqueName = pc.getParamIdForComponent(keyInputField);
// Render stuff after InputField
renderAfterInputTag(hxInputField, pc, uniqueName, popUpKeyUniqueName);
return inputField;
* Render the HTML to be placed before a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param field
* @param pc
public static void renderBeforeInputTag(HxField field, IPageContext pc) {
renderBeforeInputTag(new HxInputField(field), pc);
* Render the HTML to be placed before a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param inf
* @param pc
public static void renderBeforeInputTag(HxInputField inf, IPageContext pc)
if (writingDebugToConsole) {
System.out.println("Start rendering mimic HxInputField (id='" + inf.getId() + "') ...");
if (showDateHelp(inf) || showPopUp(inf) || showPatternHint(inf) || showStatusMsg(inf)) {
pc.write("<table cellspacing="0" cellpadding="0" border="0" id="");
pc.write(""><tr><td>");
* Set a HMTLB InputField with the values stored in the HxField.
* This makes for less code in the JSP, and some versions of the PDK/EP
* do not support some paramters in the TAG (e.g. Tooltip)
* @param hxField
* @param myContext
* @param pageContext
public static InputField setUpInputField(HxField hxField, IPageContext pc, PageContext pageContext) {
Component component = (Component)pageContext.getAttribute(hxField.getId());
if (!(component instanceof InputField)) {
String msg =
"HxInputFieldRenderer.setUpInputTag() component is not instanceof InputField " +
"(hxField.getId()='" + hxField.getId() + "' " +
" component.getClass().getName()='" + component.getClass().getName() + "')";
PortalRuntime.getLogger("htmlx").severe(msg);
throw new IllegalArgumentException(msg);
InputField inf = (InputField)pageContext.getAttribute(hxField.getId());
setUpInputField(hxField, inf, pc);
return inf;
* Set a HMTLB InputField with the values in the HxField.
* This makes for less code in the JSP, and some versions of the PDK/EP
* do not allow you to set some paramters in the TAG (e.g. Tooltip)
* @param hxField
* @param myContext
* @param pageContext
public static void setUpInputField(HxField hxField, InputField inf, IPageContext pc) {
inf.setDisabled(hxField.isDisabled());
inf.setInvalid(hxField.isInvalid());
inf.setMaxlength(hxField.getMaxLength());
inf.setRequired(hxField.isRequired());
inf.setShowHelp(false);
inf.setTooltip(hxField.getTooltip());
inf.setType(DataType.STRING);
inf.setValue(hxField.getValueAsString(pc.getLocale()));
inf.setVisible(hxField.isVisible());
inf.setSize(hxField.getMaxLength());
* Set a HMTLB InputField with the values stored in the HxField.
* This makes for less code in the JSP, and some versions of the PDK/EP
* do not support some paramters in the TAG (e.g. Tooltip)
* @param hxField
* @param myContext
* @param pageContext
public static void setUpInputField(HxInputField hxInputField, InputField inf, IPageContext pc) {
inf.setDisabled(hxInputField.isDisabled());
inf.setInvalid(hxInputField.isInvalid());
inf.setMaxlength(hxInputField.getMaxlength());
inf.setRequired(hxInputField.isRequired());
inf.setShowHelp(false);
inf.setTooltip(hxInputField.getTooltip());
inf.setType(DataType.STRING);
inf.setValue(hxInputField.getPreformattedValueAsString());
inf.setVisible(hxInputField.isVisible());
inf.setSize(hxInputField.getSize());
* Render the HTML to be placed after a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param field
* @param myContext
* @param pageContext
public static void renderAfterInputTag(HxField field, IPageContext pc, PageContext pageContext) {
renderAfterInputTag(new HxInputField(field), pc, pageContext);
* Render the HTML to be placed after a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param inf
* @param myContext
* @param pageContext
public static void renderAfterInputTag(HxInputField inf, IPageContext pc, PageContext pageContext) {
Component component = (Component)pageContext.getAttribute(inf.getId());
String uniqueName = pc.getParamIdForComponent(component);
String popUpKeyUniqueName = "";
if (inf.isShowPopUp()) {
component = (Component)pageContext.getAttribute(inf.getId() + "PopUpKey");
popUpKeyUniqueName = pc.getParamIdForComponent(component);
renderAfterInputTag(inf, pc, uniqueName, popUpKeyUniqueName);
* Render the HTML to be placed after a HTMLB InputField so that it
* behaves like a HTMLX HxInputField
* @param inf
* @param pc
* @param uniqueName
* @param popUpKeyUniqueName
public static void renderAfterInputTag(
HxInputField inf,
IPageContext pc,
String uniqueName,
String popUpKeyUniqueName)
if (showDateHelp(inf)) {
String dateFormat = HxLocaleUtil.getSapDatePatternNumber(pc.getLocale());
pc.write("</td><td align='left'><button id='");
pc.write(uniqueName);
pc.write("-btn' type="button" tabindex="-1" ti="-1" class="urEdfHlpDate" onclick="htmlb_showDateHelp(event,'");
pc.write(uniqueName);
pc.write("','");
pc.write(dateFormat);
pc.write("','1')"></button>");
pc.write("<script>htmlb_addTexts('pt_BR',{SAPUR_OCTOBER:"Outubro",SAPUR_MSG_LOADING:"Processo de carga em andamento"," +
"SAPUR_SUNDAY_ABBREV:"Do",SAPUR_F4FIELD_TUTOR:"Pressionar F4 para exibir as entradas possíveis"," +
"SAPUR_INVALID:"Não válido",SAPUR_FEBRUARY:"Fevereiro",SAPUR_F4FIELD:"F4- campo de entrada"," +
"SAPUR_FRIDAY_ABBREV:"6ª",SAPUR_WEDNESDAY_ABBREV:"4ª",SAPUR_MAY:"Maio",SAPUR_MSG_WARNING:"Advertência"," +
"SAPUR_DECEMBER:"Dezembro",SAPUR_SEPARATOR:"-",SAPUR_MSG_SUCCESS:"Com êxito",SAPUR_SATURDAY_ABBREV:"Sa"," +
"SAPUR_THURSDAY_ABBREV:"5ª",SAPUR_MSG:"{0} {1} {2}",SAPUR_BUTTON_WHL:"{0} - {1} - {2} - {3}",SAPUR_JULY:"Julho"," +
"SAPUR_APRIL:"Abril",SAPUR_FIELD_TIME:"Hora",SAPUR_MSG_ERROR:"Erro",SAPUR_REQUIRED:"Necessário"," +
"SAPUR_BUTTON_WHL3:"{0} - {1} - {2}",SAPUR_SEPTEMBER:"Setembro",SAPUR_NOVEMBER:"Novembro",SAPUR_AUGUST:"Agosto"," +
"SAPUR_JANUARY:"Janeiro",SAPUR_BUTTON:"Botão",SAPUR_FIELD_PW:"Senha",SAPUR_FIELD:"Texto editável"," +
"SAPUR_DISABLED:"Não disponível",SAPUR_FIELD_DATE:"Data",SAPUR_MARCH:"Março",SAPUR_FIELD_NUMBER:"N°"," +
"SAPUR_MSG_STOP:"Stop",SAPUR_BUTTON_WHL4:"{0} - {1} - {2} - {3}"," +
"SAPUR_BUTTON_ENABLED:"Para ativar, utilizar a barra de espaço",SAPUR_TUESDAY_ABBREV:"3ª",SAPUR_READOLNY:""," +
"SAPUR_MSG_JUMPKEY:"Pressionar a barra de espaço para navegar para o campo correspondente",SAPUR_JUNE:"Junho"," +
"SAPUR_MONDAY_ABBREV:"2ª"});</script>");
if (showPopUp(inf)) {
String dateFormat = HxLocaleUtil.getSapDatePatternNumber(pc.getLocale());
pc.write("</td><td align='left'><div class="urEdfHlpSml" onClick="");
pc.write("htmlxPopUp('");
pc.write(getPopUpUrl(pc, inf.getPopUpPage()));
pc.write("', '");
pc.write(uniqueName);
pc.write("', '");
pc.write(popUpKeyUniqueName);
pc.write("', ");
pc.write(inf.getPopUpWidth());
pc.write(", ");
pc.write(inf.getPopUpHeight());
pc.write(", '");
pc.write(inf.getPopUpAttributes());
pc.write("')">");
pc.write(" </div>");
if (showPatternHint(inf)) {
String pattern = "";
String patternTooltip = "";
if (DataType.DATE.equals(inf.getType())) {
pattern = HxLocaleUtil.getDatePatternInLocaleLanguage(pc.getLocale());
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.DatePatternTooltip", pattern);
else if (DataType.TIME.equals(inf.getType())) {
pattern = HxLocaleUtil.getTimePatternInLocaleLanguage(pc.getLocale());
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.TimePatternTooltip", pattern);
pattern = " " + pattern;
else if ((inf.getPatternHint() != null) && (inf.getPatternHint().length() > 0)) {
pattern = " " + inf.getPatternHint();
patternTooltip = HxLocaleUtil.formatHxMsg(pc.getLocale(), "HxInputField.PatternTooltip", pattern);
pc.write("</td><td align='left'>");
pc.write("<span class='sapTxtLeg' title='" + patternTooltip + "'><nobr>");
pc.write("<font color='666666' face='Microsoft Sans Serif' style='vertical-align:super' size='1'><b>" + pattern + "</b></font>");
pc.write("</nobr></span>");
if (showStatusMsg(inf)) {
if (inf.getStatusMsgPosition().equalsIgnoreCase("RIGHT")) {
pc.write("</td><td align='left'>");
pc.write("<font color='990000' face='Microsoft Sans Serif' size='1'>");
else if (inf.getStatusMsgPosition().equalsIgnoreCase("BELOW")) {
pc.write("</td></tr><tr>");
if (showDateHelp(inf) && showPatternHint(inf)) {
pc.write("<td align='left' colspan='3'>");
else if (showDateHelp(inf) ^ showPatternHint(inf)) { // '^' is Exclusive OR (XOR)
pc.write("<td align='left' colspan='2'>");
else {
pc.write("<td align='left'>");
pc.write("<font color='990000' face='Microsoft Sans Serif' style='verticle-align:super' size='1'>");
pc.write("<nobr>" + inf.getStatusMsg() + "</nobr>");
pc.write("</font>");
if (showDateHelp(inf) || showPopUp(inf) || showPatternHint(inf) || showStatusMsg(inf)) {
pc.write("</span></td></tr></table>");
// Generate code to store the current Locale in the HTML form,
// and make the month and day names available in javascript arrays.
// The form's Language attribute is used as a flag so that this is only
// done once for each form.
Form form = pc.getCurrentForm();
if ((form.getLanguage() == null)
|| (!form.getLanguage().equals(pc.getLocale().toString()))) {
// Save the locale in the html form as hidden fields so that the
// same locale can be used to parse returned data.
pc.write("<input type="hidden" name="_HTMLX_LANGUAGE_" value="" + pc.getLocale().getLanguage() + "">");
pc.write("<input type="hidden" name="_HTMLX_COUNTRY_" value="" + pc.getLocale().getCountry() + "">");
pc.write("<input type="hidden" name="_HTMLX_VARIANT_" value="" + pc.getLocale().getVariant() + "">");
// Write javascript arrays of month and day names in the locale language
StringBuffer sb = new StringBuffer(250);
String javaScriptPath = pc.getJavascriptPath();
sb.append("var javaScriptPath='");
sb.append(javaScriptPath);
sb.append("';");
java.lang.String dayNames[] = RenderUtil.getDayAbbreviations(pc.getLocale());
if (dayNames.length != 7) {
throw new IllegalStateException("Only locales with 7 days are supported!");
sb.append("var htmlbDayNames = new Array('");
for (int i = 0; i < 6; i++) {
sb.append(dayNames<i>);
sb.append("','");
sb.append(dayNames[6]);
sb.append("');n");
sb.append("var htmlbMonthNames = new Array('");
java.lang.String monthNames[] = RenderUtil.getMonthNames(pc.getLocale());
for (int i = 0; i < 11; i++) {
sb.append(monthNames<i>);
sb.append("','");
sb.append(monthNames[11]);
sb.append("');n");
String jscript = sb.toString();
pc.getDocument().getIncludes().addBodyEndResource(ResourceType.DIRECTJSCRIPT, "HTMLB_INPUTFIELD_DATEHELP", jscript);
pc.getDocument().getIncludes().addBodyEndResource(ResourceType.DIRECTJSCRIPT, "HTMLX", getHtmlxJavascript());
// Set the language in the form so we don't do this again
form.setLanguage(pc.getLocale().toString());
if (writingDebugToConsole) {
System.out.println("Finished rendering mimic HxInputField (id='" + inf.getId() + "')");
private static boolean showDateHelp(HxInputField inf) {
if (DataType.DATE.equals(inf.getType())
&& inf.isShowHelp()
&& !inf.isDisabled()) {
return true;
return false;
private static boolean showPopUp(HxInputField inf) {
if (!showDateHelp(inf)
&& !inf.isDisabled()
&& inf.isShowPopUp()) {
return true;
return false;
private static boolean showPatternHint(HxInputField inf) {
boolean isDateOrTime = DataType.DATE.equals(inf.getType()) || DataType.TIME.equals(inf.getType());
boolean patternHintSet = (inf.getPatternHint() != null) && (inf.getPatternHint().length() > 0);
if (inf.isShowPatternHint()
&& (isDateOrTime || patternHintSet)) {
return true;
return false;
private static boolean showStatusMsg(HxInputField inf) {
if (inf.isShowStatusMsg()
&& (inf.getStatusMsg() != null)
&& (inf.getStatusMsg().length() > 0)) {
return true;
return false;
private static String getPopUpUrl(IPageContext pc, String pageName) {
IPortalComponentRequest request = (IPortalComponentRequest)pc.getRequest();
IPortalComponentResponse response = (IPortalComponentResponse)pc.getResponse();
IPortalUrlGenerator portalGen = null;
IUrlGeneratorService urlGen = (IUrlGeneratorService)request.getService(IUrlGeneratorService.KEY);
ISpecializedUrlGenerator specUrlGen2 = urlGen.getSpecializedUrlGenerator(IPortalUrlGenerator.KEY);
if (specUrlGen2 instanceof IPortalUrlGenerator) {
portalGen = (IPortalUrlGenerator) specUrlGen2;
// Create the url to the iView
String url = "";
if (portalGen != null) {
// Create the parameters passed to SAP transaction for mesima
url = portalGen.generatePortalComponentUrl(request, pageName); // "htmlxJarMimicExample.default");
return url;
protected static String getHtmlxJavascript() {
return "n" +
" if(window.document.domain == window.location.hostname) { n" +
" document.domain = document.domain.substring(document.domain.indexOf('.')+1); n" +
" } n" +
" var popUpTextId; n" +
" var popUpKeyId; n" +
" var myPopUp; n" +
" function setTextField(text) { n" +
" field = document.getElementById(popUpTextId); n" +
" if (field) { n" +
" field.value = text; n" +
" } n" +
" else { n" +
" alert('Text target field for pop up not found (' + popUpTextId + ')'); n" +
" } n" +
" } n" +
" function setKeyField(key) { n" +
" field = document.getElementById(popUpKeyId); n" +
" if (field) { n" +
" field.value = key; n" +
" } n" +
" } n" +
" function setFields(text, key, close) { n" +
" setTextField(text); n" +
" setKeyField(key); n" +
" if (close) { n" +
" myPopUp.close(); n" +
" } n" +
" return false; n" +
" } n" +
" function htmlxPopUp(url, textId, keyId, width, height, attributes) { n" +
" popUpTextId = textId; n" +
" popUpKeyId = keyId; n" +
" if (myPopUp) { n" +
" myPopUp.close(); n" +
" } n" +
" if (event!=null){ n" +
" xPos = event.screenX-event.offsetX; n" +
" yPos = event.screenY-event.offsetY; n" +
" } n" +
" if ((xPos+width) > screen.availWidth) { n" +
" xPos=screen.availWidth - width - 10; n" +
" } n" +
" if ((yPos+height) > screen.availHeight) { n" +
" yPos=screen.availHeight - height - 10; n" +
" } n" +
" sizeAndPos = 'width=' + width + ', height=' + height + ', top=' + yPos + ', left=' + xPos; n" +
" myPopUp = window.open(url, 'PopUp', sizeAndPos + ', ' + attributes); n" +
" if (!myPopUp) { n" +
" alert('You may have unrequested popup blocking on.'); n" +
" } n" +
" }n";
// Methods to assist dubugging JSP pages
* @return True if debug messages are being written to the console
public static boolean isWritingDebugToConsole() {
return writingDebugToConsole;
* When an error occurs in a JSP page the line number given in the stack
* trace is rarely the line that caused the error. This can make traking
* down errors in a JSP page can be very difficult. By writing debug messages
* to the console every time a field is rendered, it can be much easier to
* identify the area of code causing a problem.<p>
* <b>Do NOT set this in the production release of your application.</b>
* @param b
public static void setWritingDebugToConsole(boolean b) {
writingDebugToConsole = b;
* Initialise to NOT write debug to the console
static {
writingDebugToConsole = false;Try these
[http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/65ad4ee0531aa8e10000000a114a6b/content.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/content.htm]
[http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01381.0120/doc/html/koh1278435126915.html]
Reagards,
Mouli -
Need help with Hard Disk usage selection.
I am going to get a Mac Pro and I am goint to probably use Final Cut Studio and Photoshop. This is the Hard Disk setup I was thinking of:
Bay 1:WD Raptor X 150GB - OS X and some big applications.
Bay 2:Stock 250GB - Downloads and some programs
Bay 3:750GB Seagate - Music, photos, and videos (Multimedia)
Bay 4:120GB - Scratch Disk for Final Cut Studio and Photoshop
I need recommendations especially about the scratch disk. I need to know if the scratch disk is recommended to have a specific size or speed. Also, instead of the 750GB drive, I would probably wait becaus Seagate might releases a 1TB drive.Would be nice if we could unleash those other two SATA ports sitting unused untiil there are PCI Express controllers. And are there any drive 'kits' or something in the wings to mount two extra drives? do-able?
If you need 400GB for music, photos and video, then yes, 750GB makes sense. And you think you might want/need 1TB? Given the problems RAIDing those "super size" Seagate's and the unacceptable I/O on some drives reported by Barefeats...
Backup concerns: SATA drives in a universal case with hot-swap drive bays so you can use same SATA as you have internally, and where 750GB Seagate would be nice - and expandable. And where a FW800 interface would be acceptable and offer decent performance (maybe even Oxford 912 "RAID" FW).
For now, it might make sense temporarily to use external for one drive, and reserve the internal drive bays for things like scratch and RAID.
With SoftRAID 3.5.x and 3 x 500GB drives, you could create a stripped RAID using the outer tracks and still have non-RAID or even 2nd RAID using the remaining space.
I would not use 120GB drive for anything. 320 (or 300GB because they are affordable and fast) as the smallest density capacity (except for Raptor of course).
Two 500GB drives, or two 750's if the bugs or problems get fixed, and using those in RAID? Heck, remove the 250GB and get 3rd. -
Hi,
I am working on a project for a system that will not have a mouse. Ideally I would like the screen to function almost like a video game would -- even though it is not a game. By this I mean that all keystrokes are handled at the window level and dispatched to the correct component depending on the keystroke.
Currently I have inhibited the ability of components on the form to gain focus. When I press a key, the listener associated with the JFrame responds... I then attmpt to use dispatchEvent inside of a case statement to route events to the proper components (In this case a JTextField) The problem is, is that allthough the dispatchEvent call is made, the JTextField doesn't do anything with it. I am just typing characters so I would expect all these keystrokes to show up in the JTextField, but it does not work.
Does anybody know why this might not work?
-BenjaminHere is a code snippet that actually seems to work. The problem was that I was dispatching a keyPressed event rather than a keyTyped.
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
class NoFocus extends JFrame implements KeyListener {
private class JTextFieldNF extends JTextField {
public JTextFieldNF(int size) {
super(size);
public boolean isFocusTraversable() {
return false;
JTextFieldNF tfnf;
public NoFocus() {
tfnf = new JTextFieldNF(20);
getContentPane().setLayout(new FlowLayout());
getContentPane().add(tfnf);
addKeyListener(this);
public void keyPressed(KeyEvent evt) {
public void keyTyped(java.awt.event.KeyEvent evt) {
switch (evt.getKeyCode()) {
// Route up and down key somewhere else
case KeyEvent.VK_UP:
case KeyEvent.VK_DOWN:
break;
// All keystrokes not expicitly used are piped to tfnf
default:
tfnf.dispatchEvent(evt);
public void keyReleased(java.awt.event.KeyEvent A) {
public static void main(String args[])
JFrame frame = new NoFocus();
frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
frame.setSize(200,200);
frame.setVisible(true); -
Drawing green halo border with RectBorder
Hello,
I'm trying to create few custom AS2 components which would
look similar to the standard components.
The
component
development checklist by Adobe suggests:
quote:
Use the RectBorder class (mx.skins.halo.RectBorder) rather
than graphical elements to draw borders around objects.
Unfortunately there aren't any docs or examples for that
except the classes in the mx\controls\*.as files.
I have tried the following in my custom AS2 component:
quote:
public function createChildren():Void {
createClassObject(RectBorder, 'border_mc',
this.getNextHighestDepth(),
{ styleName: this, borderStyleName: 'default'});
private function size():Void {
super.size();
border_mc.setSize(width, height);
invalidate();
and I do see a thin grey rectangle border around it now.
But how do I get the standard haloGreen border, like the v2
Button has?
(And I want it to be themeable/skinnable as well)
Thank you for any hints
AlexFirstly, save yourself some typing:
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.io.*;
Secondly, use tags to format your code:
http://forum.java.sun.com/faq.jsp#messageformat
You need to sort out some other stuff. I'm getting a null pointer when I try to run your program. Seems to relate to the following:
private static ColorContainer[][] drawing;
You have declared an array but have you initialised it? -
How to set DataGrid one cell colour
I want to set one cell colour in DataGrid,for example,when a
set a CheckBox in DataGrid ,I want letset this Cell's colour
changeOne way to work around this, might be to create your own
cellrenderer with an extra backround movie clip. So as you pass the
value of the check box, either you set the fill color of the BG
movie clip or just hide/show the BG clip.
I hope the following brief script might be of help,
class myCell extends UIComponent
var bg:MovieClip;
var cBox:CheckBox;
function createChildren(Void) : Void
// Create a new CheckBox
// Create a new Background Clip
bg = this.createEmptyMovieClip("bg_mc" , 0);
bg.beginFill(color, fill);
bg.moveTo(0, 0);
bg.lineTo(4, 0);
bg.lineTo(4, 4);
bg.lineTo(0, 4);
bg.lineTo(0, 0);
bg.endFill();
size();
function size(Void) : Void
super.size();
this["bg_mc"]._width = width;
this["bg_mc"]._height = height;
invalidate();
function setValue(cellVal) : Void
if (cellVal == true)
bg._visible = true;
else
bg._visible = false;
Notes: BG: is the background movie clip.
You will need to use AS based cellrenderer -
I-phone unlock screen has very large letters and numbers.
I-phone has large letters and numbers on the unlock screen. can see only about 1/4 of the screen it's so large. can't see the slide to unlock bar, only part of the actual time. will not compress with fingers. phone recieves e-mail/phone calls but can't unlock it. tried restore twice and shutting phone off. pulled SIM card too. when it's restoring the screen is normal size as soon as it's finished it goes back to super -size.
I'm having exactly the same problem, but It doesn't do a thing when I tap it twice or even three times. It's just locked on my screen saver. I can unlock it with some difficulty, because the screen is so enlarged. But, then I just get a big screen with numbers. I've reset it multiple ways, but with no luck.
-
import java.awt.*;
public class Launcher extends Box
public static void main(String[] argv)
//Graphics thingy = null;
Point piss = new Point(200,200);
Dimension shit = new Dimension(200,200);
Box square = new Box(piss); // <- Launcher.java:10
System.out.println(square);
public class Box extends AComponent
public Box()
super();
public Box(Point pt)
super(pt); // <- Box.java:15
public Box(Dimension size)
super(size);
public Box(Point pt, Dimension size)
import java.awt.*;
public abstract class AComponent implements IComponent
protected AComponent()
m_pt = new Point();
m_size = new Dimension();
protected AComponent(Point pt)
m_pt.setLocation(pt); <- AComponent.java:19
m_size = new Dimension();
protected AComponent(Dimension size)
m_pt = new Point();
m_size.setSize(size);
protected AComponent(Point pt, Dimension size)
m_pt.setLocation(pt);
m_size.setSize(size);
public Object clone()
private Point m_pt;
private Dimension m_size;
private AComponent copy;
java.lang.NullPointerException
at AComponent.<init>(AComponent.java:19)
at Box.<init>(Box.java:15)
at Launcher.main(Launcher.java:10)
Exception in thread "main"
Would some kind person tell me why I'm getting the above runtime error message and end my night of java torture.
thks. in advance.my cut and paste just did not workout so pls disregard above.
Maybe you are looking for
-
How do i use 2 ipod touches with 1 itunes account?
how do i use 2 ipod touches with 1 itunes account? can they share apps and music etc. I'm not very good at any tech so advise would be much appreciated.
-
I am unable to update my album art on my iMac since I started using Match (and after upgrading to Yosemite 10.10.3). A message advises that it's not possible to removed old artwork if it's embedded. How can I 'unembed' old cover art and replace?
-
How many devices can I link to my I-cloud/I-match account?
I have an I-cloud and I-match account with all my music on, most of which consists of my own cd's copied onto it. I've just bought my mum an iPod nano 6th generation for her birthday and I want to put some music onto it for her so it's all ready to
-
Dear Experts, We are generating delivery schedules thru MRP .The Schedule agreement doc type is LP. No JIT or FRC schedules is applicable as the delivery schedules are generated through MRP. now how can i release these delivery
-
Protocol Helpers/File Mappings
I'm just wondering if Apple plans (or has already implemented a way) to allow users to change protocol helpers or file mappings through Safari. If not, is anyone aware of a program that will allow a user to change these settings in Safari 2.0? I used