Gather the "System status component information" via database table

Hello!
Which SAP/maxdb-table contains the "System status component information" data ?
(i.e all components installed in the Abap-part).
What does a sql statement (via dbmcli) look like to extract this information from that table?
Version of the ABAP AS is NW2004s, maxdb is on 7.6.01.12
Regards,
Fredrik
Message was edited by:
Fredrik Rosengren
Message was edited by:
Fredrik Rosengren

Hello Frederik,
I think you mean table CVERS.
dbmcli -d xxx -u xxx,xxx sql_execute select * from cvers
Something like that.
Regards, Michael

Similar Messages

Maintaining the systems status as release at the time of upload

Dear all,
While uploading the master data for Business Entity and Buildings I want to make the system status as release. How do we achieve this?
Also at the time uploading the contracts I want to make the system status of the contract as active. How can we do this at the time of upload.
Expertu2019s pointers are highly appreciated.
Regards.
Vara Prasad

Hi Vara,
I guess you are using the API_RE_* function modules for uploading the data. You can use these
APIs also to set the system status. You have to set the parameter ID_TRANS and provide the activity that sets the status (example: for system status "released" the activity BFRE, for activation of contracts the activity is MCAK).
I hope this information is helpful for you.
Regards, Franz

Need to change the system status in CRMD_ORDER

Hi,
The status of the deffect is set to "Relase Items" in crmd_order. Now if i try to do any changes it is not allowing me to change. Is there any way to reset the system Status .
Your help is appriated.
Regards,
Srilu.
Edited by: Srilu.M on Oct 15, 2010 8:32 AM

hi
refer this thread, the same scenario
[Re: CRMD_ORDER - Status|Re: CRMD_ORDER - Status]
jansi

PS-Relationship between the system status in wbs elements and activities.

Relationship between the system status in wbs elements and activities.
We have the following requeriment with the system status in PS. We have a project with complete technically status and we want to undo the complete technically status in one activity without changing the complete technically status in the WBS element or the project.
The reason is that after putting the complete technically status, users have to change the values in the P.O. We don´t want "open" all the project and we only need to "open" the activity where the P.O. are in.
Is that possible? How is connected the system status between activities, wbs elements and the project son I can change the status in the below step without changing the higher steps?
Thanks in advance.

Hi Bala
Yes, you have put it rather correctly.
We use WBS elements for booking and posting time (client requirement). So what I am looking for is WBS Elements with the system status TERL (Time and Expense Released).
I talked of the deletion flag also, because a WBS element flagged for deletion can't be used. It's one of the criteria to screen the WBS elements.
I hope it's clearer now.
Vinitha.

FM for getting the SYSTEM STATUS in pp order.

hi,
i wnat to know what is the FM used to get the SYSTEM STATUS in pp order.
and the parametes needed t be passed.

HI,
1. go to tcode BS22 (Maintain: System Status)
2. look for the system status TECO.
3. Double click the field "TECO".
4. in the transaction control tab look for the business transaction "RMWA" or goods movement (you can type it in the lower left corner buttom box).
5. select the radio button from "Allowed" to Disallowed".
6. save your changes.
Here are the function moduels:
SYSTEM_STATUS
UPGI22_GET_SYSTEM_STATUS
UPG_GET_SYSTEM_STATUS
TMS_CFG_GET_SYSTEM_STATE
Regards
Sudheer

Check the system status

Hi,
I have a simple question for you..
How can I check the system status when i save my order...
The purpose is not save orders whith errors.
Thanks,
Hugo.

Hi Hugo,
You need not do anything with the status.
Just create a BADI Implementation for the BADI definition ORDER_SAVE in SE19.
In the method PREPARE, call the function module CRM_MESSAGES_CHECK_FOR_ERRORS to check for errors in the order. If there are errors in the order then call the function module CRM_MESSAGE_COLLECT to show the additional error message 'Order can't be saved as it contains error' and exit.
You can also do any additional validation that you want. Save and activate the BADI implementation.
Now create an order and see if the code written works or not.
<b>Reward points if it helps.</b>

How to suppress the system status of an Equipment from display ?

Hi,
I am working with transaction IE02 and IE03 and would like to surpress the display of the system status on the transaction.
I have checked config for screen groups and screen fields and have not been able to find a solution.
any ideas are greatly appreciated.

Hi Chaitanya,
You should be able to hide those fields by creating a standard variant(If you want to hide those fields for everyone executing those transaction) for the same transaction.
Please have a look at transaction SHD0 to accomplish the same.
Thanks
Narasimhan

Changing the System status for previous transactions

Hello,
Could some body help me with this ?
I have a User status profile with user status ABC which triggers system status Inprocess. This is applicable for all the new transactions for which we set the status ABC which works fine. But we have some previous transactions ( Prior to this config ) with status ABC , but system status is not Inprocess.
How can we change the system statuses for all these transactions? do we have a report for this?
Best Regards,

Hi,
You can use 'STATUS_CHANGE_INTERN' FM to change the system status. Pass Object number and status ID as inputs to the Function Module.
Regards,
Lakshmi.Y

Linking the system status to user status.

Dear all,
In the customising we have the provision of creating user profile. My requirement is if the system status is having a certain value like ESTO - in the equipment master then this should automatically set the defined user staus and prevent user from modifing the record (equipment master) and when the system staus is changed as AVLB, then the user status should also change and permit user to modify the record.
Experts help is expected.
Can anyone suggest any method of adopting the same - is there any settings for this.
Regards,
M.M

I was able to get the statuses in a table , and as theer are more than one entry fo each of teh WBS so I need to concatenate the systme statuses together and user statuses togerher and finally concatenate the user status and system staus togehter in one field .
SO like fo system status I ahve 3 entreis , I need to concatenate them into one . But somehow when I loop and try concatenating them only the last entry is registeredd and similary for the user status too . Is there a= way I can concatenate so all teh three entries show in like a string
Right now the system status are AVEC, CTRD, SYST in my internal table as three values , how do i concatenate them into one string?
Thanks

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

The system cannot download information from the SQLSERVER server.

Hi All,
After BPC 7.0 SP6 for MS install we get the following when trying to access the "Manage Application Sets" or any other admin console task, when we try to execute the connection wizard:
The system cannot download information from the SQLSERVER server.
There may be a network or security issue.
Error Message:Error code: 500
any ideas?
Br
Steven

Steven,
Could you also make sure that the problem is not on the client side.
Is this a fresh installtion on the client machine? Or was there already an previous version of BPC on this machine?
If this is not a fresh install, you can try to uninstall the software and then deleting all the files in the folder
"program files\BPC". I've seen that sometimes not all the files are automatically deleted.
Then installing the Bpc client agian...
Kind regards,
Sam

Tables fields where the system status is getting stored

I need to find out the Quotes which have open and completed system status.
Once I find these orders I need the check the validity dates of the Quotes.
Can experts please let me know the tables where the system status and the validity dates are stored?

Try TJ02
It contains the System status ISTAT.
Kindly execute the report CRM_ORDER_READ.
This is a report for executing the FM CRM_ORDER_READ.
provide the transaction ID or guid as teh input.
Check the ET_STATUS and ET_APPOINTMENT tables which contain the details required.
In the table ET_STATUS search with the header GUID.
The values with I are the system status and the value with E is the user status.
Explore the result of this report to get more detail.
Regards,
Taher

Is there any function module to Change the System Status

Dear ABAPers,
I am working in the Customer Service Module.I want to change the System status.
Is there any function module to change the System Status.
Thanks & Regards,
Ashok.

Hi Ashok
Service Order status update function module ?
How to set the system status
Check above threads,
Regards,
Syf

How to use of Business Trnasaction That set the system status in BS23

Run Tcode BS23, If i give I0117 in left bottom corner > Enter> Click on system Status I0117 Top Left corner > Press F6> system will go to system Status Cross reference screen
Here we can find the Business Transaction related information like Process That set the status, Process that deletes the status etc. ( business transaction like RMEP ,RMEZ ,RMUP )
Above scenario i have depicted for System Status DSPT. But
Now my Question is very generic not for only I0117 System Status ( DSPT)
But from name of business transaction how can we get idea that, this Business Transaction can be performed by which T Code,
this Bu transaction is belogs to which module etc....
How can I find help related to this business Trnasction from System / any report/ Programme from SE38 etc.....
I am functional, Please explain me accordingly..
Being Functional Consultant how can we get maximum help from this Business Transaction.
Any help pointing to above querries would be appreciated.
Regards
Nitin

Hi,
Try transaction BERP.
It will give you the following info.
1. See the business events available and the pupose they are meant fot
2. Documentation for that particular event (here you can know where exactly it is called)
3. Interface parmeters required in the custom FM
4. A sample function module with the export import parameters.
There are few more transaction which are usefull in Bte
FIBF --> Maintenance transaction BTE
BERE --> Business Event Repository
BERP --> Business Processes
BF31 --> Application modules per Event
BF32 --> Partner Modules per Event
BF34 --> Customer Modules per Event
BF41 --> Application Modules per Process
BF42 --> Partner Modules per Process
BF44 --> Customer Modules per Process
and Bte is attach to a process it works in similar way like workflow do, you can't exactly know the tcode by looking into the event but you can know it with the process for eg.
This event is called while invoice printing.
00705000 Invoice print: Exclude contracts
and we can get more info by checking its description.
Hope this will help,
With best regards,
Navneet Chaubey

UNTECO the system status which is TECO

Hi experts
How or where can i check the user not allowed to do unteco (IW32 Order->Function ->Cancel technical Completion) which is the status already TECO. means once the status in IW32 is TECO. user do not akl

Authority check is executed via authorization object I_VORG_ORD "PM: Business Operation for Orders"
the authorization fields are AUFART "Order type" and BETRVORG "Business transaction"
To find the correct "Business transaction" look via transactions BS23 "Display system status" - look for TECO (I0045) and perform a where used search you should find a list of processes that set and delete the status.
Regards,
Raymond

Gather the "System status component information" via database table

Similar Messages

Maybe you are looking for