GeForce GTX 780M and After Effects

I just got a brand new iMac with the GeForce GTX 780M 4GB of VRAM, and I was hoping I could use the Ray-tracing 3D effects. I'm not sure if I am doing something wrong, but the option to switch to GPU is greyed out. I have not installed anything except After Effects since I got the machine, so maybe I need to install CUDA? Where would I go about finding the drivers for that so I could try it.
Thanks,
David Faircloth

> Kinda irrates me that Adobe doesn't keep the list up to date.
It's not as if Apple sends us hardware to test with. We wish. Nvidia, Dell, HP, and others do, which is why you see so many of the Quadro K series on our tested-and-supported list before the cards are even released.
We test GPUs based on customer requests and depending on when the hardware becomes available to us.
Note, however, that this is all moot since as I said in my first post, we have made it easy for you to use GPUs before we can get around to testing them and issuing an update.

Similar Messages

NVIDIA GTX 775M and After Effects

Hi!
I am using at the company I work for an Imac 27" 3.4 ghz with a NVIDIA GTX 775M GPU. My boss is considering purchasing After Effects. As this GPU is not in the Adobe AE list, does it mean that is just not the recommended or means that After Effects will not work at all?
Thanks for your help!

As Dave hints at, AE uses the GPU for very little - see here: GPU (CUDA, OpenGL) features in After Effects
Some third-party plugins (like Element 3d or Red Giant's Universe) do use the GPU, but they have completely different requirements from AE's old "approved for ray-traced acceleration" list.
Also as Dave mentions, the After Effects team at Adobe have stopped development of the ray-traced renderer in favor of ever-increasing integration with Cinema 4D. And Cinema 4D (Lite) now comes included with After Effects! Check out the details of CINEMA 4D integration with After Effects here

Problem with Matrox Mini, NVIDIA GeForce GTX 570, Premiere 5.5.2 and After Effects CS5.5

Hello,
We have a couple video workstation PC's in our office.
Premiere and After Effects have been crashing lately with increasing frequency - about every two minutes now.
Here is the setup:
Hardware
Matrox Mini - Matrox Utility release 5.5.1
Nvidia GeForce GTX 570 - Driver release 275.33
Intel Xeon X5660 2.8 GHz processors
24 GB Ram
Software
Adobe CS5.5, specifically...
After Effects 10.5.0.253
Premiere 5.5.2
Windows 7 64-bit
We have two 21" LCD monitors in dual display running from the computer, and the Matrox Mini outputs a preview signal to a 15" CRT.
The crashes occur when I have After Effects and Premiere open at the same time. I am editing in a Matrox 720p29.97 timeline in Premiere. I imported several compositions from AE into Premiere through Dynamic Link and am matching audio with the animations in comps. When I switch back to AE to make an edit in the comp, After Effects generates a crash warning and then gives me the opportunity to save the project under a new name. After saving, it closes down completely. The Matrox WYSIWYG Control Panel in the system tray crashes during AE's crash, disabling the preview to the CRT from Premiere and AE. Since the Premiere sequence is a Matrox preset - in order to have output to the CRT - this freezes the timeline; the video and audio no longer play. When I save and then try to close Premiere, Premiere freezes and will not close without a force quit via the Task Manager.
In order to deal with this temporarily, I am editing in an AVCHD 720p30 sequence preset in Premiere, which doesn't send a preview feed to the CRT, obviously, since it's not a Matrox preset and the CRT is connected via the Matrox Mini. It's more than a minor inconvenience, since I use the CRT for color accuracy.
It is frustrating, since we did not have this problem until the recent CS5.5.2 update. We have tried changing drivers for the GTX 570 and changing the Matrox utility software to other versions, but no luck.
Is there a combination of GTX 570 drivers, Matrox software releases, and AE/Premiere settings that will make this work? I know there are "Known Issue" posts with Nvidia cards on Matrox's website, which include the GTX 570, but, again, this problem started with the Adobe CS5.5.2 update.
Any help here would be great, and I am willing to provide more information about the system and our crashes if it helps find a solution for the community, as I know this is not an isolated problem after reading Nvidia's, Matrox's, and Adobe's forums. I just can't find a hollistic solution on any of the individual manufacturer's forums.
Thank You.
Jordan

I've been running with Matrox for years, starting with the Axio LE. I do 75% broadcast work and find that the Matrox works very well with my kind of workflow. Monitoring is critical and since we have to deal with 3rd. party solutions, Matrox was my pick dating way back to 2006. Sure I've had frustrations with it, but I've made far more money off Matrox than frustration.
   Here's my nearly crash-free setup:
Gigabyte GZ-X58A-OC moboard
Intel 990X (only overclocking to 4.0)
24Gb of Kingston HyperX Ram
GTX580 Graphics Card
Matrox MXO2-LE w/Max
Crucial 240Gb Sata III drive (the one that has a nearly perfect score on Newegg's site)
2 x 2Tb WD Blacks Raid 0
2 x 1Tb WD Blacks Raid 0
Win 7 Ultimatte (it's a high-end version of Windows that's great for keying!)
CS5.5 Suite
Boris Red 5
Boris Continuum Complete 8
Trapcode Shine, Form, 3d Stroke, Starglow, and Particular
Optical Flares by Video CoPilot
   The reason I list all of that software, is that it all seems to get along together, including with Matrox! So, I can't say I highly endorse Matrox because I've never tried Black Magic or running an external monitor off of my video card.
    I use After Effects with all sorts of plug ins and rarely have crashes. If I put in a long day I'll have the usual crashes here and there (mainly with PremierePro), but nothing that has required evan a soft reboot of the computer.
   My frustration with Matrox is mainly the delay that often comes with Adobe coming out with a new release and Matrox taking 2 or 3 months to catch up, though when Adobe went from 5 to 5.5, there was no delay at all.
   I think that a lot of the people who trash Matrox probably haven't used a Matrox product in years. But before you listen to me, I must confess that I was an early adopter (and advocate) of SSDs and even today, many people on this forum think they're still a waste of money!
   I'll close by simply saying that I've not left Matrox after 5+ years, but keep in mind I haven't had the bad experiences that so many others seem to have had, but again, perhaps they had those bad experiences long ago.

I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB CUDA grayed out Can somone help?

I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB I downloaded the CUDA Driver Version: 6.5.46 but I still dont have the option in after efects to use the CUDA for beter permance ? Can somone help?

Hi Nick,
Nick Politis wrote:
I have a imac with a NVIDIA GeForce GTX 780M 4096 MB 32 GB I downloaded the CUDA Driver Version: 6.5.46 but I still dont have the option in after efects to use the CUDA for beter permance ? Can somone help?
After Effects uses your CPU and RAM Primarily, not the GPU.
You only need NVIDIA CUDA for one function: the acceleration of ray-traced 3D compositions. Your newer Maxwell NVIDIA GPU does not contain the OptiX Library necessary for this function so it will not ever work for accelerating ray-traced 3D compositions. Sorry.
The After Effects team is no longer working on this feature and suggests that you use Cinema 4D Lite (bundled) for your 3D work instead. There are also some great third party options for adding 3D elements to After Effects compositions like Invigorator Pro and Video Copilot Element 3D.
Hope that clears things up.
Thanks,
Kevin

CUDA for Nvidia GeForce GTX 780M

Hi, I encountered an prompt message from AE CC when I start the software saying this:
Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray-tracing will use the CPU.
After installing CUDA 5.0 or later, restart your computer.
Therefore, I need some answers on whether I can download CUDA driver on Nvidia Geforce GTX 780M.
I am running on Mac OS X Mavericks 10.9.1, specs are as follow:
3.5 GHz Intel Core i7
16GB 1600 MHz DDR3
Nvidia GeForece GTX 780M 4096MB
1TB Fusion Drive

brianchaffee wrote:
How do you set your comp's to use the standard renderer only?
In the advanced tab of your composition settings. More info here.
If you really need 3d in After Effects and don't have time to learn C4D (although, you should make time because it's a powerful program and it's free with AE), you could get a third-party plugin like Element 3d (which is amazing) or these tried and true methods.

New Imac 27" i7, NVIDIA GeForce GTX 780M 4096 MB startup lil prob.

I everlyone,
i have a doubt about my new IMAC 27"
When i turn on my mac after the normal gray with logo, i have for a nano sec. a green screen with yellow apple just for a nano sec, and then the system starts normally, no problem when i use or if i use for a long time.
i pre configured my i mac
NVIDIA GeForce GTX 780M 4096 MB
Fusion Drive 1
and I7 core
that's what i've change.
I do know if it's a real problem or it's normal...
Anybody can tell me something? or have the same issue?
thanks in advance

Thank you just one hour and Apple shold call me back
Fingers crossed

Adobe Premiere Pro and After Effects CS5.5 Lagging Horribly with Dynamic Link

I just bought a brand new computer. It is a beast
Windows 7 64-bit
Intel i7-980 6 cores with HT = 12 CPU cores
Nvidia GTX 570HD 1280mb 328 bit
120gb SSD sata 3
600 gb Velociraptor drive 10000rpm
8gb DDR3 1866MHZ ram
So you would think I would get no lag. But for some reason, when I edit in premier pro or after effects, especially when I use dynamic link with premiere and after effects. It lags realllllly badly. I am talking about 5fps and I have to pause and wait like 20 secs then hit play again to get 5 secs of smoothness and then the laggyness returns. I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264. I tried messing around with all the settings but I cannot get anywhere. Anyone know what the problem might be? I don't have any other programs running since I just installed these. This lag is really holding me back and I cannot edit properly because of it.

Your memory is ill configured, since you are using it in dual channel mode instead of triple channel mode and 8 MB is about bare minimum. You would be better off if you were to increase memory to 24 GB. Secondly, your disk configuration is the absolute minimum requirement, so adding a couple of disks will help performance as well.
I am not even using heavy footage. It is footage off of a Canon 5D Mark II h.264
Mistake. It is one of the most demanding codecs on the market. Look here: Adobe Forums: System requirements for CS5
You could try the PPBM5 Benchmark to see how well your setup performs.

Premiere and After effects no longer work after graphics card upgrade

So heres my problem. A week ago my gtx 295 died. So I got a new gtx 780 and new ram. After installing my new card and installing the latest drivers premier and after effects cs6 crash on the splash screen. Whats wierd is these are the only programs that crash. After effects cs4 works fine along with all my maya stuff. I reinstalled premier and it still crashes for some reason.
I'm running vista ultimate 64bit with the cs6 production suite. I do have some plugins on after effects including the trapcode suite amd optical flares.
Any tips?

graphik wizard wrote:
So heres my problem. A week ago my gtx 295 died. So I got a new gtx 780 and new ram. After installing my new card and installing the latest drivers premier and after effects cs6 crash on the splash screen. Whats wierd is these are the only programs that crash. After effects cs4 works fine along with all my maya stuff. I reinstalled premier and it still crashes for some reason.
I'm running vista ultimate 64bit with the cs6 production suite. I do have some plugins on after effects including the trapcode suite amd optical flares.
Any tips?
graphik wizard,
The only thing I can think of is that Windows Vista is not one of the supported operating systems for Premiere Pro CS6. Only Windows 7 is listed. Is it possible to upgrade your OS?
Thanks,
Kevin

Is (4770 3.5 i7 qouad core 8 mb cach) good enough for premier and after effect?

Hi guys,
am buying the new imac 27" with its maximum features: 32 GB, 1 TB ssd, NVidia gtx 780 with 4GB, but I am worried about the cpu (4770 3.5 i7 qouad core 8 mb cach) is it good enough for premier and after effect?

Thanks John, but I've already read that page. I have just a simple question about the performance of "4 core" and "6core" if anyone had already tried both of them.

Issue with Dynamic Link with Premiere CC and After Effects

I'm having a strange and annoying issue with Dynamic linked clips in Premiere CC:
When I render or export my timeline the progress will stall when it hits a dynamic linked clip. It will stay stalled until I click the After Effects application and make it the active window. Once that happens the render/export resumes at normal speed.
This is annoying as I can't start a render and walk away or work on different windows, I have to babysit all the renders to make sure they go through.
Has anybody experienced this and know of any solutions?
I'm running the latest version of Premiere (7.2.1) and After Effects 12.2.0.52 on Mavericks 10.9.1 with a GTX 770 Video Card.

Does it still pause if AE is closed completely? I often experience slower AME renders from Premiere over dynamic link material when AE is open. Closing AE speeds things up. Go figure.

Rendering Pc with k5000 Quadro for Premiere and after effects!!

Hello,
I am filmmaker and I use adobe after premiere and adobe after effects for visual effects, also I use cinema 4d and Maya for 3d work, I need to get the best GPU to give me real time in premiere cuda and also good 3d ray-traced in after effects, also I use 3d maxon cineware plugin in after effects cc 2014 for my 3d composition.
I need Good GPU handle 4k footage from Red epic camera in adobe premiere and after effects
Planing to buy K5000 from amazon for 1599$, check please and advise
http://www.amazon.com/NVIDIA-Quadro-K5000-Graphics-PNY/dp/B009L8E4UO/ref=sr_1_1?ie=UTF8&qi d=1407996945&sr=8-1&keywords=k5000#customerReviews
My Question:
1-      Is this item above from amazon for PC or mac? because is not mention in description
2-      Is this the best GPU for my usage for adobe permiere and after effects and 3d apps?
3-      If there is cheaper GPU and will give similler result for my adobe software? please advise
4-      Amazon k5000 price 1599$ there is cheaper place and trusted.
Best regards,
Hasan

yes i plan to buy 64 GB 1600mhz, Kingston HyperX Blu 8GB
and for HDD i select this WD Black 4 TB Desktop Hard Drive: 3.5 Inch, 7200 RPM, SATA III, 64 MB Cache, 5 Year Warranty - WD4001FAEX
http://www.amazon.com/gp/product/B00A2IM76K/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=AQ2KN WSHKTD2T
i don't know how to use raid configuration and what the benefit
and can you advise me what to buy K5000 or GTX titan black

Are these video card perfect voor premiere pro and after effect ?

I want to my a new laptop but i don't know what good gpu's are for premiere pro and after effect
are thise cpu perfect ?
3GB NVIDIA® GeForce® GT 555M Graphics Card
1GB NVIDIA® GeForce® GT 550M Graphics Card
1GB NVIDIA® GeForce™ 435M GT grafische kaart (Wireless N1000 Card Only)
1GB NVIDIA® GeForce™ 420M GT grafische kaart

None are perfect, for the simple reason that all laptops are handicapped.
The best looks to be the 3 GB 555M. None of these cards are on the supported list, so you must try to hack them. Hacking is not difficult but there are no guarantees it will work and we have not yet seen results from these cards.

I want to upgrade my Qosmios graphics card from GeForce GTX 670M to GeForce GTX 780M?

Hi!
I have a TOSHIBA Qosmio X875-Q7390.
Its graphics card which is NVIDIA GeForce GTX 670M 3GB GDDR5 dedicated has broken down.
Since I need to replace it, I'd like to upgrade it.
To GeForce GTX 780M. Or even maybe to GeForce GTX 970M.
What do you say? Can I?
Thanks.

Hymans123, welcome to the forum.
Is this the video card that you want to buy? If so, it should fit. The length is 8.58". You can make a template the size of the card to assure that it will fit with room for good airflow.
There is one caveat, however. Many of the GTX 750 series video cards require a UEFI BIOS to operate. You can get this information from the manufacturer.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

NVIDIA GeForce GTX 780M supported by CUDA?

I'm interested in purchasing an iMac to run Premiere CC
There are two card choices:
NVIDIA GeForce GTX 780M
NVIDIA GeForce GTX 775M
I'm having trouble verifying exactly which of these is supported and the best for editing.
Thanks for the help!

Program questions http://forums.adobe.com/community/premiere/content
Hardware questions https://forums.adobe.com/community/premiere/hardware_forum

I need to reinstall my computer, how do I deal with Premiere pro and After effects?

Hello,
As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
I have Creative suit production premium, I also have the free Creative cloud.
It is only Premiere pro and After effects that I am using and am worried about.
Thank you for any help.
-Lisa Kajupank
(and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
Message was edited by: umustbejoking

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(84620)

GeForce GTX 780M and After Effects

Similar Messages

Maybe you are looking for