General and first problem for every one...
i hv posted this question 2nd time.I never think that this question
would hv no reply.surprise for me this common question do not hv answer.
i hv tried j2me 2.0 beta.but its size is too large that i can pick it up to get * and # on its keypad.
plz suggest me if u know.
thanx
Ahh ... now I think I got it!
So the emulated mobile device is too large to display completely on your screen, so that important parts of the buttons etc. remain unseen!!??
Hmm - I really haven't used the beta 2.0 yet - but I will do so in the near future.
Seems like a trivial suggestion, but shouldn't turning up the resolution of your display be able to solve the problem?
If you already are at a maximum I can see your point.
Seems strange that Sun would supply oversized stuff... what is your maximum resolution by the way?
Other than that - maybe there are different devices to choose from? Like in the WTK104?
But this really is just guessing around - I think I'll just download it myself!
Similar Messages
-
while opening pdf files the menu bar, navigation bar cracks unobviously and also close and minimise buttons goes hidden..Facing the problem for last one month. Please help.
The latest Kaspersky software version is 15.0.1.415 or 15.0.1.415ab.
-
XML Error Message for Every one hour in SXMB_MONI
Hi All,
I am getting XML error Message for every one hour in PI when I check in SXMB_MONI I can see this.
Details Below
Sender Componant : PI
Sender Interface : SAPCCMS
Reciever Interface/Reciever Componant : Both are empty.
PI Version 7.1
Can anybody help in this.
DayakarHi!
I was just searching this about this problem and found a post that might interest you.
[urn:SAPCCMS;
cheers -
How can i schedule concurrent program for every one hour from back end
Hi ,
I want to schedule concurrent program for every one hour from back end .
Example
1) xyz is the concurrent program that should run for every one hour with a parameter 111 and the SAME concurrent program that
should run every 2 hours with a different parameter like 222.
I mean Conc prog should run for different parametrs with a different scheduling..
Please guide me to solve the issue.
Thanks in advance...
Regards
Narender BHi ,
I have used following code for scheduling the concurrent program from backend.
declare
l_request_id NUMBER;
l_return_code boolean := FALSE;
BEGIN
fnd_global.apps_initialize(62991,54477,20003);
l_return_code := FND_REQUEST.SET_OPTIONS ('YES');
l_return_code :=fnd_request.set_repeat_options('16:36:00','','DAYS','START','','Y');
l_request_id:=fnd_request.submit_request(application => 'xbol',
program => 'NAPP_START_GENERATE_CHART_DATA',
description => 'Processing chart ',
start_time => SYSDATE,
sub_request => FALSE,
argument1 =>4000130957231588,
argument2 => null
COMMIT;
dbms_output.put_line('Program has been submited and request id is '||l_request_id);
END;
Here the issue was concurrent program is completing with a warning like
Resubmission of request 75588551 has been cancelled.
FND_RESUB_PRIVATE.PROCESS_INCREMENT EXCEPTION: ORA-01403: no data found
Resubmission of request 75588551 has been cancelled.
FND_RESUB_PRIVATE.PROCESS_INCREMENT EXCEPTION: ORA-01403: no data found
so i could not find the solution for this issue,please anybody guide me to solve this issue.
Regards
Narender B -
I want to schedule a dbms_job to run for every one hour
Hi Guys,
I want to schedule a dbms_job(in oracle 10g) to run for every one hour. Can any one provide some idea on this.
KLRThanks for your reply, but I am getting the error below
'ORA-06550: line 1, column 112:
PLS-00103: Encountered the symbol "END" when expecting one of the following:
:= . ( @ % ;
The symbol ";" was substituted for "END" to continue.
ORA-06512: at "SYS.DBMS_JOB", line 82
ORA-06512: at "SYS.DBMS_JOB", line 139
ORA-06512: at line 7'
can you please check this error and let me know how can I execute one package for every one hour and how to see whether the job is running every one hour or not.
Thanks in advance.
KLR. -
There is problem for every client.
Dear Experts,
There is problem for every client .....
Their inventory is valuated by FIFO method and they use Serial numbers on each and every transaction for their business.
As per the system the valuation at Delivery is taking by the FIFO method.
The customer has a requirement to get the inventory value based on the serial no. Is there any way to get out of this situation.
The Item FG001 is bought at 100 unit price with Qty 2 by having serial numbers Q1,Q2.
In the second transaction
The Item FG001 is bought at 120 unit price with Qty 2 by having serial numbers Q3,Q4.
As per the system if we create delivery document for the same item with qty 2 by giving serial number selection with qwe3 and qwe4, the system is taking the value for the items as 200.
But, my customer wants it to be as 240.
Is there any way to solve this.
Thanks & Regards
Manvendra Singh Niranjan
Edited by: Manvendra Singh Niranjan on May 6, 2009 1:28 PMPlease check these threads:
Cost By Seria Number
Re: Inventory valuation by serial number.
Thanks,
Gordon -
RDA Runs daily from 11am - 11pm for every one hour
Dear All,
One Job runs daily from 11am - 11pm, for every one hour its a RDA, to know the data about the sales on every hour of that day, every morning and the night i m doing manually scheduling and stopping the process, is there any process which the process can automatically run between 11am - 11pm daily for every one hour with out any manual effort, kindly suggest me if there is any process type.
Thank you
Regards,
Krishnahi krishna,
in sm37 go to the ur job and select that and goto job in menu bar and say copy and give proper name and then select the copied job and agian goto job in menu and click then it takes to the next screen where you can select start condition and give timings and periodicity and save the job..
hope it helps
Bhaskar -
Is it possible to purchase creative cloud and try it for only one (1) month? My free trial expired without using it.
The price is higher, I think $70. But you can purchase without the annual commitment.
-
Having read what I could from the related questions, the answers still elude me. This issue apparently is specific to Windows 8.1.
First, a little background.
1: The server is not on a domain, The system runs Server 2008-R2 standard with all folders shared across a standard "Workgroup" type network. They would prefer to
leave this layout intact.
2: The shared folders are nothing but Data files. There are no active system folders or anything used in an "active" environment. They are mostly Word doc, excel
files, pdf, txt, etc. However, due to the requirements of the software that needs to access these files, they Must
reside on a mapped network drive letter. Nothing else works due to the way the SQL database program stores the reference points back to the data.
I have had some success using what amounts to a “simulated” mapping using WebDAV to access the server. But access speed is a lot slower ad file size is limited.
3: The system has been configured as-is for the past 3 years with Users all on Windows 7 x64 (mixed OS, some Home Premium, some Professional) and the only problems that come up are when
access is through an ISP that blocks port 445. This was the original reason for finding a WebDAV/Cloud method just for those Users since they were unable to Map drives to anything on the Office Servers from their Home Internet even when using a VPN.
When Windows 8.0 became the only version available, I added a few users whose new laptops came with 8.0 from the vendors. While there were a very few minor problems, for all practical
purposes, I was still able to provide access to the mapped folders.
As the Windows 8.1 roll-out progressed, some users were successfully upgraded while others are still stuck in Windows 8.0. The issues with this seem to be hardware related and vary
depending on the Make and model of the laptop. I have been assured that eventually all of these will be able to advance to 8.1. But this delay has given me an excellent mixed OS environment for testing.
On the users who have not yet purchased new equipment and who are still using Windows 7. There has been no change. Their drive mapping is stable and they can always connect as usual.
Those blocked from lack of port 445 or still blocked. Systems inside the Office and those with ISP's who allow port 445 can use all mapped drives as normal.
Users who had Windows 8.0 and who have not yet been able to upgrade to 8.1 also have been unaffected. Same results as Windows 7.
Users who got the Windows 8.1 upgrade as well as those that came factory loaded with Windows 8.1 seem to be a never-ending list of problems. The ones that came native with 8.1 are worst
of all. The list of error codes runs through everything that has to do with “communication with the server”. As far as I have seen, this appears to be the issue.
Whether they are in the office on a wired network connection or at home on a Wi-Fi connection, the issues have the same results but the actual error codes may vary slightly. All of
them refer back to an inability to communicate with the server.
Nothing on the server has changed in any way. Users with Windows 7 continue to have zero problems, Users with Windows 8.0 seem to be doing fine as well. Only those with Windows
8.1 are affected and their problems are dramatic with everything from a total loss of drive mapping to misdirected data when the maps are active.
I have tried to make the drives automatically remap on reboot. I have tried registry modifications. I have done everything I can think of to make a difference but the results are the same
for every system using 8.1. The mapped drive letters invariably disappear. Sometimes while the system is in use ( I think I have been able to trace this to times when the system enters Sleep or Hibernate) but always when the system reboots.
One detail that might point to somewhere is that the "time to connect" when mapping the drive is so long that I believe some of the original failures were due to not waiting for a
minimum of 3 or 4 minutes to give time for the Shares to show-up in order to map them. Once the mapping is successful, the file access speed seems normal. But invariably, the drive becomes "unmapped" repeatedly each day.
I know this was a long question but I have tried to provide every possible detail for anyone who has experienced events like this who may already have a solution. I would even be glad
to purchase a 3rd party application if that is what it takes to get this to work. My next planned effort is to try using Server 2013 but I am afraid that might open another can of worms for those who still use Windows 7.
I have also been told that this is in some way related to the push to "Cloud" support in Windows 8.1 OS but I do not see where this would come in. I can say that this was the
one place where things continued to work as before. People who had Windows 8.1 and who had to use the CLOUD copies of our data are still able to connect to it with no problems.
Any suggestions appreciated. Preferably those that would not need extensive changes to the basic network structure. This "workgroup" consists of less than 25 users and any
extreme measures would be hard to justifyHi,
I sugget you try to ping server so that we can verify the connectivity.
Can windows 8.1 access Windows Server 2008R2?
Also,please check the event viewer to see if some error log appeared when the issue occurred.
Regards,
Kelvin Xu
TechNet Community Support -
i JUST RENEWED MY CONTRACT ONCE MORE , AS i HAVE DONE PLENTY OF TIMES IN THE PAST , BUT THIS TIME THE PHONE i PICKED , WELL THE EXILUIM WORKED FINE FOR ABOUT ONE WEEK , BUT THEN I REALIZED IT WOULD NOT HOLD A CHARGE !, now by this time ( being with Verizon as long as I have and not having had any problems ) I had thrown the box away that the phnoe came in , well now they will not take it back because the box is gone, and they will not send me AT THE LEAST ANOTHER BATTERY FOR MY BOULDER . I cannot get anyone to help me ( a good paying customer with two active phones, ) but I will leave VERIZON AS SOON AS POSSIBLE, the way I see it they have but one chance to keep my business and that is to honor the " worry free " thing they so boast on.
mccahill wrote:
i JUST RENEWED MY CONTRACT ONCE MORE , AS i HAVE DONE PLENTY OF TIMES IN THE PAST , BUT THIS TIME THE PHONE i PICKED , WELL THE EXILUIM WORKED FINE FOR ABOUT ONE WEEK , BUT THEN I REALIZED IT WOULD NOT HOLD A CHARGE !, now by this time ( being with Verizon as long as I have and not having had any problems ) I had thrown the box away that the phnoe came in , Being with Verizon as long as you have, you would (SHOULD) also be aware of the policy that the phone needs to be returned IN THE ORIGINAL PACKAGING....I ALWAYS save everything until I am beyond the return point....I know I can return it, but I also know I need the packaging and the UPC to get any mail in rebates--so I don't even cut out the UPC until I know I'm going to keep the phone.
well now they will not take it back because the box is gone, Ummmm, yeah, that's what the rules are... and they will not send me AT THE LEAST ANOTHER BATTERY FOR MY BOULDER If it's your old phone, then it's on you--I replace batteries and don't expect Verizon to pay...there are lots of accessory vendors on line with awesome prices; just be sure to get an OEM battery. I've had good service, fast delivery, and excellent products buying online.
I cannot get anyone to help me ( a good paying customer with two active phones, ) but I will leave VERIZON AS SOON AS POSSIBLE, the way I see it they have but one chance to keep my business and that is to honor the " worry free " thing they so boast on. You have (had) a responsibility as well; there are conditions for returning and exchanging phones via the Worry Free Guarantee, and you don't have the original packaging. You can keep trying, and you may eventually get a sympathetic rep. Good luck. -
Firefox 31.0 - slowness and script problems for using websites
Since Firefox 31.0 is released, some technical problems of slowness and script problems to use
websites have been noticed from mine. Sometimes it needs up to some minutes to load a website
and sometimes there are error messages for an unanswered script.
pemigabo123Hello FredMcD,
thank you for your message.
But your answer to my question at support.mozilla.org is not helpful,
although it is a professional technical answer from a Top 10 Contributor
from mozilla.
It seems that there is a permanent unfixed problem always if a new
version of mozilla is released. After all fixed problems of the earlier
version of firefox, there is no problem at all.
But if I am already working with the non-problem earlier version of
firefox, then suddenly the problems of error messages, slowness and
script errors are appearing, and if I have looked for the actual version
of firefox, there was signed a new version and now I have known,
aha a new vesion of firefox was released and it needs up some time
for every new version until the error problems were fixed.
Maybe it is combined with the plugins like flashplayer or shockwave.
But a professional version of firefox should not sign up error messages,
because of plugins, while working with these plugins.
Another answer from another support.mozilla.member was for an
overload problem, because of opening some windows of firefox.
But to open many windows of firefox was already no problem with the
earlier version firefox 30.0 or earlier, until the error messages are fixed.
The same unfixed problems are since firefox 25.0 up to 30.0, but I was
wondering for how long version 30.0 was actual in practical working.
And since version of firefox 31.0 was released the same problems
of error messages, slowness and script errors were appearing.
At the moment it seems firefox 31.0 works alright.
But only the following time shows if it works without error messages,
slowness and sript problems or not.
In hope to give a helpful answer to yours
kind regards
pemigabo123 -
IE sents 2 emails for every one email
Hello,
Iam struck with this problems since days....I have to find a solution for it...I have a email program that sends HTML content mails. When i send mails from Firefox mentioning the TO,CC,BCC there are no multiple mails. But when i open the same email program in IE and send mails ,it sends 2 mails for every mail i send. I do not see anything wrong in my code. It works fine in FireFox but not in IE. Whyyyy?????
Can anybody tell why this problem occurs. Has anyone faced a similar problem.
Pls reply
praveenaDownload jnetkits from
http://www.wisesoft.biz/jnet/index.html.
There has no such problem -
Santur Instrument template and pitch setup for every note
1) Does anyone know if there is a "Santur" instrument (http://en.wikipedia.org/wiki/Santur)
template supplied by Apple or anyone for MainStage?
2) Assuming there was one, does MainStage support setting up custom "pitch" control for "every note"?
I have a need to tune every note individually.Caramby wrote:
I think he means Custom Tuning.
Yep. I think he does too
I realise this is MainStage, but Tunings (Temperaments) are dealt with in the Logic Pro manual (p.948):
User
+Each semitone can be detuned (moved away) from equal temperament in semitone steps. To do so, just click-drag—vertically—on each semitone box until the desired value is reached.+
The reason alternative tunings are mentioned in the Logic Pro manual (in the "Project Settings" section), and not in the Mainstage manual, is that they only apply to Logic projects. Mainstage does not directly support altered tunings.
The 'Persian Santoor' setting referred to by the previous poster is a Garageband 'Strings' instrument setting. This can be opened in the EXS24, both in Mainstage and Logic.
It may have been possible to alter the tuning of the individual samples within the EXS editor, but in this particular case, the samples are mapped across several semitones. I suspect that your need to alter the tunings may not be possible with this patch (without a lot of work).
Note that, although there is a button on the EXS interface, the EXS Instrument Editor cannot be opened within Mainstage; only in Logic.
HTH
CCT -
Thank you for every one can help me please
Dear whom read my question
I have windows server 2012standard edition with windows 7 ultimate clients
I want to show some items of control panal through group policy so I went to user configration - adminisstrative tempelets -control panal-shom the specified item
and then I add wha t I want (region and language, devices and printer)
and make gpupdate for booth server and client but they did not show in control panal so plese what the cause ?
please any one can find me the real answerHi,
Based on your description, we can run cmd command
gpresult/v on client machines to check the group policy result and keep us posted.
For double check, regarding how to show Control Panel items in Windows 7 using Group Policy, the follow article can be referred to as reference.
How to show or hide Control Panel items in Windows 7 using Group Policy
http://www.grouppolicy.biz/2010/11/how-to-show-or-hide-control-panel-items-in-windows-7-using-group-policy/
Best regards,
Frank Shen -
POP3 and IMAP problem for one user
Hi All,
One of my users has recently connected her iPhone4 to our GW7. We set her up just like numerous other of our users, and she is having some issues. When set up as IMAP using the default application on her iPhone, she can see all her folders and all her mail up to December 21, 2011, but nothing after that. If she asks to download more messages, it successfully shows earlier messages, but still nothing more recent than December. When set up as POP, she is able to download recent messages, but there are wide gaps in what she can see. Whole days are missing. I can send her a new message, and she can POP it right away, but messages that came in just hours before will not come over. None of our other users have any such issues--including at least one with the same iPhone.
The user swears that she has no other e-mail program POPing mail--and even if she did, I don't think it would explain the IMAP issue--but I may be wrong about that. This user does have an incredibly large online mail account--over 20,000 messages in her Mailbox folder alone. I have examined her POA indexes, and they show nothing un-indexed.
I have used my own phone (Droid Bionic) to connect to her GWise account and I see the same behavior from her account.
We are using GWIA 7.0.2, and I can see her phone making connections successfully. I see no errors, but I have not yet studied a Verbose display when she connects.
Any suggestions about how to proceed to troubleshoot this?
What could I do if I wanted to reset whatever information her account stores as to what messages have been POP'ed off or to reset whatever info about IMAP is maintained?
Thanks in advance,
Peter.On 1/12/2012 3:16 PM, pgsmick wrote:
>
> Many, or shall I say /imapreadlimit -10, thanks to you Michael.
> Preumably there is a reason for this limit, and I don't feel like caving
> in to pressure from users who refuse to clean out their mailboxes, but
> what are the specific downsides to raising the limit? And does this
> shed any light on the other issue with using the POP3 method?
>
> Again, you're a gem.
>
> Peter.
>
>
My understanding is as you raise it, the memory usage of the POA and the
CPU hit on the POA will increase. It's been explained to me that the
IMAP standard requires certain correlations and bufferings to made
between the different items, so the memory usage increases. (IMAP is
fairly complex, so I doubt I can explain it all since I doubt I
understand it all). For example IMAP requires synthetic UIDS to be
correct for all the items in the mailbox during the session. There is
room for improvement here, but it hasn't been a super-high priority is
what I was told just this past BrainShare. It will never be a completely
low memory "streaming" kind of solution though - a lot of state has to
be built and maintained during the IMAP session.
POP, I'm not sure about. I do know GW can get confused. Have her specify
her pop UserID differently. For example if her normal gwmailbox is
jsmith, have her try jsmith:v=2 .
Also see other whacky POP switches
you can set affect the date range, and #. The "v","l",and "t" are the
most important.
User ID Login Options
With POP3 clients, users can add the options listed in the table below
to the login name (GroupWise user ID) to control management of their
mailbox messages. If used, these options override the POP3 settings
assigned through the user’s class of service (see Section 47.1.2,
Creating a Class of Service).
Login options are appended to the user ID name with a colon character
(:) between the user ID name and the switches:
Syntax: user_ID:switch
Example: User1:v=1
You can combine options by stringing them together after the user ID and
the colon without any spaces between the options:
Syntax: user_ID:switch1switch2
Example: User1:v=1sdl=10
The syntax for the user ID options is not case sensitive. Login options
are not required. If you do not want to include any login options, just
enter the user ID name in the text box, or following the USER command if
you are using a Telnet application as your POP3 client.
Table 46-1 User ID Login Options
Option
Explanation
Example
v=number between 1-31
The v option defines the POP3 client’s view number. If multiple POP3
clients access the same GroupWise mailbox, each client must use a
different view number in order to see a fresh mailbox.
For example, if two POP3 clients access a mailbox and the first client
downloads the unread messages, the second client cannot download the
messages unless it is using a different view number than the first client.
If this option is not used, the default value is 1.
User_ID:v=1
d
The d option deletes the messages from the GroupWise mailbox after they
have been downloaded to the POP3 client.
User_ID:d
p
The p option purges the messages from the GroupWise mailbox after they
have been downloaded to the POP3 client.
User_ID:p
t=1-1000
The t option defines the download period, starting with the current day.
For example, if you specify 14, then only messages that are 14 days old
or newer are downloaded. If this option is not used, the default value
is 30 days.
User_ID:t=14
n
The n option downloads messages in RFC-822 format rather than the
default MIME format.
User_ID:N
m
The m option downloads messages in MIME format. This is the default.
User_ID:M
s
The s option presets the file size when the STAT command is executed. If
the user mailbox contains a lot of messages or large messages, it can
take a long time to calculate the file size. With this option, the STAT
command always reports an artificial file size of 1, which can save time.
User_ID:S
l=1-1000
The l option limits the number of messages to download for each POP3
session. For example, if you want to limit the number of messages to 10,
you enter l=10. If this option is not used, the default value is 100
messages.
Maybe you are looking for
-
HI, The payment block R can be removed with MR8M (release blocked item), but sometimes it happens thet someone just delete the block manually.I would like to ask if somebody knows if SAP shows anywhere which way the R payment block was removed? Thank
-
Universal Music Group audible watermarking on digital downloads?
Hello, I wanted to take a moment to praise Apple for being so patient and persistent around a sound quality issue I've been noticing for months with certain of my digital purchases from the iTunes Music Store. Start of story: I noticed that certain o
-
How to transfer Sony Handycam videos to ipad?
Is there a way to transfer sony Handycam videos from the camera HDD to my ipad?
-
Question concerning document icons changing
after I loaded 10.5.6 the majority of my document icons on my desktop do not show what type of document they are. If I create a folder on my desktop and place the document into the new folder the icons show the kind of file that it is i.e. adobe icon
-
Using DMR for multiple GR line item
Hi, I would like to ask for some clarification in using DMR. For example is I have multiple line item for a GR with separate Inspection Lot Number. How will it be handled during DMR? A scenario is for a example, I have 10 lot. First 9 lot skipped the