General Query for CO related to PS

Hi CO's
WBS has reciever PSG in settlement rule, after settlement where the effect will shown for PSG.
If using Resourse related billing if we do settlement first cost will be picked up in billing?
Regards,

If the PSG is the settlement rule, It will be updated in COPA.
As far as resource related billing, it depends on scenario we are doing.. Some times we can capture revenue alone or costs alone..
Please expalin your scenario in detailed.. i can answer you..

Similar Messages

Querying for no related object on n-m relationship

Hi,
I have a n-m relationship between two objects A and B. I want to query all A objects that do not have a B (a.getB().isEmpty()). Is there a way to build an expression for that ?
I cannot use getField("B_FK").isNull as the foreign key is in a relationship table and I'd like to avoid using direct SQL, so I'm kind of stuck.
Thank you for any help you could provide me.
Bye.

The trick is to use a nested query, and think of the relationship in the other direction (i.e., not that A has many B's, but that B belongs to an A).
There is an example of something similar to this on page 1-32 of the 903 "Using TopLink Foundation Library Guide". The example shows a query to find all the Employees who manage more than 5 employees.
Here is a similar example I wrote recently to find all the HockeyTeams without any Players on them (sorry, it's NHL playoff time and I am Canadian.
=====================
ExpressionBuilder team = new ExpressionBuilder();
ExpressionBuilder player = new ExpressionBuilder();
ReportQuery subQuery =new ReportQuery(Player.class, player);
subQuery.addCount();
subQuery.setSelectionCriteria(player.get("team").equal(team));
Expression exp = team.subQuery(subQuery).equal(0);
ReadAllQuery q = new ReadAllQuery(HockeyTeam.class, exp);
Vector v = (Vector)serverSession.acquireClientSession().executeQuery(q);

Query for spatial data with a GeometryCollection fails

There are exact 538 CurvePolygons (only exterior rings at this
sample). All of them are valid geometries and equal in dimension
and so on. Now I connect them to a GeometryCollection and query
for other relating spatial data in some tables. It seems that
the use of around (not exact!) 200 CurvePolygon in one
GeometryCollection works fine but the adding of more
CurvePolygon result in an error with the Spatial Index (I could
add the ORA- error numbers if I have some data in my test tables
again next days).
Is there anybody else having trouble with these mysterious
problem? Maybe there is a border by the number of points in
GeometryCollection?
(More details, programming code could be delivered)
(working with Java 1.3.1, oracle.sdoapi.*, Oracle 8.1.7.)

Hi Lutz,
Could you provide more info or samples of what is going wrong?
Also, could you try making sure the geometry you are passing in
as the query window is valid (i.e. instead of passing it in as a
query window, pass it into sdo_geom.validate_geometry).
Thanks,
Dan

How to run a search query for a particular folder in KM related to portal

Hi,
Can any one tell me the steps for : how to run a search query for a particular folder in knowledge management related to portal.
Answers will be rewarded.
Thanks in advance.
KN
Edited by: KN on Mar 18, 2008 6:33 AM

Ok u may not require a coding
But u req configuration
U should first make a search option set
Link: [Search Option set|http://help.sap.com/saphelp_nw04/helpdata/en/cc/f4e77ddef1244380b06fee5f8b892a/frameset.htm]
Then u need 2 duplicate a KM Command by the name Search From here
and customize it to include the Search Option that u have created
Link: [Search from here|http://help.sap.com/saphelp_nw04/helpdata/en/2a/4ff640365d8566e10000000a1550b0/frameset.htm]
Then in the layout add this command.
Regards
BP

Approval Query for AP Invoices Containing Budget Related GL Account

Hi Experts,
I would like to create a approval template for all AP invoices that include a GL account that is related to the budget. Can you please help me with the approval query?
Thank you!
Jane

Hello Gordon Du,
"B1 approval will only apply to document level. If you want to check line level, only the first line can be subjected to."
I was thinking to trigger the approval process based on a document (AP invoice) containing relevant cost centres on a line by line basis as entered via one of the enabled dim fields.
Writing a trigger query for each cost centre effected? This does not appear to be a good solution, what is a better direction. Is there another way? (PO are not yet used via SAPB1)
Currently my invoices add, but do not trigger the approval process based on my attempts thus far.
Can the originator manually choose an approval pathway?
If this is against posting etiquette delete and advise.
I am a relative newbie to SAP B1, so am happy to be pointed to relevant help files. I arrived via google searching and arrived here.
Thankyou.

Operations manager failed to run a wmi query for wmi events (0x800706ba)

Hi everyone,
I've been working on this issue for a while and I am still no closer to finding out what the problem is. If anybody can offer any other advice or things to check, I'm all ears.
I'm running SCOM 2012 R2 with UR2, and the Cluster Management Pack v6.0.7063.0
My problem is on one particular batch of cluster servers where I am getting the following error.
Name: Operations Manager failed to run a WMI query for WMI events
Alert Description:
Module was unable to enumerate the WMI data
Error: 0x800706ba
Details: The RPC server is unavailable
Workflow name: Microsoft.Windows.Cluster.Node.StateMonitoring
Instance Name: servername.domain.local
Instance ID: {instance_id}
Management group: SCOM_Management_Grp_Name
I am getting this alert regardless of whether I run the Windows Cluster Action Account as Local System, or as a domain user with full local admin privileges on all the cluster nodes.
When looking at the management pack and the workflow in particular (Microsoft.Windows.Cluster.Node.StateMonitoring), I can see that it's trying to access
MSCluster_Node in the root\MSCLUSTER WMI namespace.
This is the workflow for your information...
<UnitMonitor> ID="Microsoft.Windows.Cluster.Node.StateMonitoring" Accessibility="Public" Enabled="onEssentialMonitoring" Target="ClusLibrary!Microsoft.Windows.Cluster.Node" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="ClusLibrary!Microsoft.Windows.Cluster.CheckState" ConfirmDelivery="false">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="Microsoft.Windows.Cluster.Node.StateMonitoring.AlertMessage">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</AlertParameter1>
<AlertParameter2>$Target/Property[Type="ClusLibrary!Microsoft.Windows.Cluster.Node"]/ClusterName$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="Success" MonitorTypeStateID="Online" HealthState="Success" />
<OperationalState ID="Warning" MonitorTypeStateID="Partial" HealthState="Warning" />
<OperationalState ID="Error" MonitorTypeStateID="NotOnline" HealthState="Error" />
</OperationalStates>
<Configuration>
<ClusterObjectName>$Target/Property[Type='ClusLibrary!Microsoft.Windows.Cluster.Node']/NodeName$</ClusterObjectName>
<PollInterval>60</PollInterval>
<ClusterObjectClass>MSCLUSTER_Node</ClusterObjectClass>
<OnlineExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</OnlineExpression>
<OnlineExpressionOnDemand>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</OnlineExpressionOnDemand>
<PartialExpression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</PartialExpression>
<PartialExpressionOnDemand>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</PartialExpressionOnDemand>
<NotOnlineExpression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</NotOnlineExpression>
<NotOnlineExpressionOnDemand>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</NotOnlineExpressionOnDemand>
<WMIFields>Name, State</WMIFields>
</Configuration>
</UnitMonitor>
I can confirm that I am able to browse the MSCluster_Node class locally, as well as remotely using WMIEXPLORER and WBEMTEST,
however it only works when I set the Authentication Level to
Packet Privacy. If I do not select Packet Privacy, a WMI event log error 5605 is logged on the remote servers application log that says...
The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level. Change the authentication level to Pkt_Privacy
and run the script or application again.
I can confirm that all firewalls are turned off, and there are no firewalls between the management servers and the agents in question. AV exclusions have been done and appear to be in place. The nodes are all Windows 2008 R2 with SP1. As
far as I can tell there is plenty of memory available on each of the nodes in question (50%+) of RAM is available.
If I manually run the "Discover the Windows Server 2008 R2 Cluster Components" task in the Cluster Service State section of the management pack in the Monitoring Pane in the console, on the nodes in question - the discovery runs successfully.
Does anybody have any other ideas or suggestions I could try?
Many thanks in advance,
Noel.
http://www.dreamension.net

Hi,
Common causes of RPC errors include:
Errors resolving a DNS or NetBIOS name.
The RPC service or related services may not be running.
Problems with network connectivity.
File and printer sharing is not enabled.
For more information, please review the link below:
Windows Server Troubleshooting: "The RPC server is unavailable"
http://social.technet.microsoft.com/wiki/contents/articles/4494.windows-server-troubleshooting-the-rpc-server-is-unavailable.aspx#Identify
Troubleshooting RPC Errors
http://technet.microsoft.com/en-us/magazine/2007.07.howitworks.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Extracting the Logical sql query for the specified report in OBIEE 11g

Hi ,
I want to extract the logical SQL Query for the Particular report in OBIEE 11.1.1.5.
Any pointers related to this will be very helpful.
Thanks,
Sonali

for a try please add Logical sql view to ur report it will dispaly the Logical sql for that Report..
Hope it will helps you.

Query for all hours in a month?

Hello,
I was hoping someone might be able to assist. I need to query for all the hours in a user specified date range (generally a month). For example,
a query such as:
select all hr_end from dual where start_date between '01-feb-2010' and '28-feb-2010'
that returns:
feb 01 2010 01:00
feb 01 2010 02:00
feb 01 2010 03:00
feb 28 2010 23:00
feb 28 2010 24:00
Ideally, I want to be able to run this query within a WITH clause such that I can reference the temporary table/ list of hours in a subsequent select statement quickly. Something like:
With
all_hrs_in_month AS
select .....
where start_date between '01-mar-2010' and '31-mar-2010'
I've looked around for similar questions, but have only found ones for all the 'days' in a month using level, connect by, row_num, for which I'm honestly not too familiar with and wasn't clear as to how I could modify to my needs.
Greatly appreciate your help with this request.
- j
Edited by: user12942939 on Apr 5, 2010 12:04 PM

Hi,
Welcome to the forum!
WITH     got_parameters AS
     SELECT     TO_DATE ('01-mar-2010 00:00', 'dd-mon-yyyy hh24:mi')     AS start_date
     ,     TO_DATE ('31-mar-2010 23:00', 'dd-mon-yyyy hh24:mi')     AS end_date
     FROM     dual
,     all_hrs          AS
     SELECT     start_date + ( (LEVEL - 1)
                    / 24
                    )     AS hr
     FROM    got_parameters
     CONNECT BY     LEVEL <= 1 + ( 24
                               * (end_date - start_date)
SELECT       TO_CHAR (hr, 'DD-Mon-YYYY HH24:MI')     AS h
FROM       all_hrs
ORDER BY hr
;Output:
H
01-Mar-2010 00:00
01-Mar-2010 01:00
01-Mar-2010 02:00
01-Mar-2010 03:00
31-Mar-2010 22:00
31-Mar-2010 23:00Notice that start_date and end_date don't have to span then entire month; they don't even have to be in the same month.
If you'd rather specify just one parameter (such as a single string containing the month and year):
WITH     got_parameters AS
     SELECT     TRUNC ( TO_DATE (:p_month, 'mon-yyyy')
                , 'MONTH'
                )          AS start_date
     ,     TRUNC ( ADD_MONTHS ( TO_DATE (:p_month, 'mon-yyyy')
                             , 1
                , 'MONTH'
                )          AS end_date
     FROM     dual
,     all_hrs          AS
     SELECT     start_date + ( (LEVEL - 1)
                    / 24
                    )     AS hr
     FROM    got_parameters
     CONNECT BY     LEVEL <= ( 24          -- NOTE: Not adding 1 here
                           * (end_date - start_date)
SELECT       TO_CHAR (hr, 'DD-Mon-YYYY HH24:MI')     AS h
FROM       all_hrs
ORDER BY hr
How It Works
SELECT LEVEL AS n
FROM    dual
CONNECT BY LEVEL <= x
;Produces a result set consiting of the integers 1, 2, 3, ..., x.
There's nothing magical about the dual table; you can use any table AS LONG AS THE TABLE HAS ONLY ONE ROW .
The other examples you saw probably just added this to a starting date, to get successive days, since, in Oracle date arithmetic, dt+n is a DATE n days after dt.
Your case is slightly more complicated, because you want to add hours, not days. Since an hour is 1/24 of a day, we multiply by 24 to find how many integers to genereate, and divide by 24 when adding that number to the base date.
Edited by: Frank Kulash on Apr 5, 2010 3:07 PM

Query for formatted search

Hi All,
I have a line UDF called U_PO in the sales order documents that denotes our purchase order number that particular item is ordered on.
I have another line UDF called U_XMill which I want to populate with the corresponding PO document due date.
What would be my query for that?
Basically, it should be something like:
SELECT T0.DocDueDate FROM OPOR T0 WHERE T0.DocNum=$[$38.44.0] FOR BROWSE
However, I am sure that "38.44" is wrong.
It should denote my current document's UDF *.U_PO.
And I am not sure what would be the correct notation for it.
I was wondering if there was a help document I could refer to to figure out the corresponding field numbers for the cases like this.
Thank you for your help.

Hello
use FMS on matrix (tables) as
[ItemUID.ColumnUID.Type] or [TableName.FieldName]
where itemUID is 38
ColumnUID is U_XMill
Type is 0 (general).
There is a now-to guide on service.sap.com/smb/sbo where you can find how to us FMS.
Regards
J

SAP Query-for Reporting   how to create and use it

Hi SAP Gurus,
i need your help. in my project, client is asking to create queries to generate reports, i am not familiar with queries, so would appreciate it if any one can guide me and tell me the procedure for writing and creating queries soon.
also if you have any study material on steps on How to write and create queries for PP module
thank you very much

Hi
Please refer below document
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Also refer below
How to Create Infoset Query (SAP Query)
Steps on how to proceed to create a Query:
ADHOC QUERY
A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
Proceedure :
Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
Menu : HR PM Admn - Information System - Adhoc Query
Select area standard and select the user group already created
Creation of new query :
TC SQ03 - Select Environment Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
TC SQ02 - Enter name of the Infoset Create enter name of Infoset - Data source -- > Table join by basis table give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button   - go out
TC SQ03 - Select user group -   eg. Payroll
Infoset - Enter name of newly created Infoset
Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
Save the query by giving the same name as infoset for easyness..
For executing a query which is already created
1. Go to SQ01 transaction
2. Go to Environment menu->query areas->std areas
3. Then choose the user group where the query is created
4. It will display all the queries created for the group.choose the query you want to executeand click execute.
5. will take to the initial screen
6. Enter the required parameters and execute
Regards
Ranga
Message was edited by:
        Ranganathan Srinivasamurthy

How to use dynamic query for Result table

Hello Experts,
I want to use dynamic query and then display the result in the assignment block.
Using dynamic query BTQAct and BTQRAct and base on some search criteria i want tofilter and then append the result in the result table of that custom context node, and then it should display the result in the view in UI.
SO can you please provide me the samplle code on how to use the dynamic query and append in the result table.
Regards.

Hi,
Please find below sample code:
data: query         TYPE REF TO cl_crm_bol_dquery_service,
           result        TYPE REF TO if_bol_bo_col.
DATA: lt_params       TYPE crmt_name_value_pair_tab,
           lwa_params      TYPE crmt_name_value_pair.
query = cl_crm_bol_dquery_service=>get_instance( 'BTQAct' ). " Get instance of dynamic query
Set general query parameter for maximum number of hits
      lwa_params-name = 'MAX_HITS' .
      lwa_params-value = '50'.
      APPEND lwa_params TO lt_params.
      query->set_query_parameters( it_parameters = lt_params ).
      query->add_selection_param( iv_attr_name = 'OBJECT_ID'
                                                iv_sign      = 'I'
                                                iv_option    = 'EQ'
                                                iv_low       = <lv_objectid>
                                                iv_high      = '' ). " Set your search criteria. Repeat this code if you have multiple parameters
"You can find possible search options for a query object in GENIL_BOL_BROWSER
result ?= query->get_query_result( ).   " Get result from your search query
me->typed_context-> <your result context node>->set_collection( result ).
Here you will have to create a context node in your view which would refer to query result object like for BTQAct its BTQRAct
Hope this helps.
e Regards,
Bhushan

Question/issue regarding querying for uncommited objects in Toplink...

Hi, was hoping to get some insight into this problem we are encoutering
We have this scenario were we are creating a folder hierarchy (using Toplink)
1. a parent folder is created
2. child elements are created (in the same transaction as step 1),
3. we need to lookup the parent folder and assign it as the parent
of these child elements
4. end the transaction and commit all data
In our system we control access to objects by appending a filter to the selection criteria, so we end up with SQL like this example
(The t2 stuff is the authorization lookup part of the query.) ;
SELECT t0.ID, t0.CLASS_NAME, t0.DESCRIPTION, t0.EDITABLE,
t0.DATE_MODIFIED, t0.DATE_CREATED,
t0.MODIFIED_BY, t0.ACL_ID, t0.NAME, t0.CREATED_BY,
t0.TYPE_ID, t0.WKSP_ID, t1.ID, t1.LINK_SRC_PATH,
t1.ABSOLUTE_PATH, t1.MIME_TYPE, t1.FSIZE,
t1.CONTENT_PATH, t1.PARENT_ID
FROM XDOOBJECT t0, ALL_OBJECT_PRIVILEGES t2,
ARCHIVEOBJECT t1
WHERE ((((t1.ABSOLUTE_PATH = '/favorites/twatson2')
AND ((t1.ID = t2.xdoobject_id)
AND ((t2.user_id = 'twatson2')
AND (bitand(t2.privilege, 2) = 2))))
AND (t1.ID = t0.ID))
AND (t0.CLASS_NAME = 'oracle.xdo.server.repository.model.Archivable'))
When creating new objects we also create the authorization lookup record (which is inserted into a different table.) I can see all the objects are registered in the UOW identity map.
Basically, the issue is that this scenario all occurs in a single transaction and when querying for the newly created parent folder, if the authorization filter is appended to the query, the parent is not found. If I remove the authorization filter then the parent is found correctly. Or if I break this up into separate transactions and commit after each insert, then the parent is found correctly.
I use the conformResultsInUnitOfWork attribute on the queries.
This is related to an earlier thread I have in this discussion forum;
Nested UnitOfWork and reading newly created objects...
Thanks for any help you can provide,
-Tim

Hi Doug, we add the authorization filter directly in the application code as the query is getting set up.
Here are some code examples; 1) the first is the code to create new object in the system, followed by 2) the code to create a new authorization lookup record (which also uses the first code to do the actual Toplink insert), then 3) an example of a read query where the authorization filter is appended to the Expression and after that 4) several helper methods.
I hope this is of some use as it's difficult to show the complete flow in a simple example.
1)
// create new object example
public Object DataAccess.createObject(....
Object result = null;
boolean inTx = true;
UnitOfWork uow = null;
try
SessionContext sc = mScm.getCurrentSessionContext();
uow = TLTransactionManager.getActiveTransaction(sc.getUserId());
if (uow == null)
Session session = TLSessionFactory.getSession();
uow = session.acquireUnitOfWork();
inTx = false;
Object oclone = (Object) uow.registerObject(object);
uow.assignSequenceNumbers();
if (oclone instanceof BaseObject)
BaseObject boclone = (BaseObject)oclone;
Date now = new Date();
boclone.setCreated(now);
boclone.setModified(now);
boclone.setModifiedBy(sc.getUserId());
boclone.setCreatedBy(sc.getUserId());
uow.printRegisteredObjects();
uow.validateObjectSpace();
if (inTx == false) uow.commit();
//just temp, see above
if (true == authorizer.requiresCheck(oclone))
authorizer.grantPrivilege(oclone);
result = oclone;
2)
// Authorizer.grantPrivilege method
public void grantPrivilege(Object object) throws DataAccessException
if (requiresCheck(object) == false)
throw new DataAccessException(
"Object does not implement Securable interface.");
Securable so = (Securable)object;
ModulePrivilege[] privs = so.getDefinedPrivileges();
BigInteger pmask = new BigInteger("0");
for (int i = 0; i < privs.length; i++)
BigInteger pv = PrivilegeManagerFactory.getPrivilegeValue(privs);
pmask = pmask.add(pv);
SessionContext sc = mScm.getCurrentSessionContext();
// the authorization lookup record
ObjectUserPrivilege oup = new ObjectUserPrivilege();
oup.setAclId(so.getAclId());
oup.setPrivileges(pmask);
oup.setUserId(sc.getUserId());
oup.setXdoObjectId(so.getId());
try
// this recurses back to the code snippet from above
mDataAccess.createObject(oup, this);
catch (DataAccessException dae) {
Object[] args = {dae.getClass().toString(), dae.getMessage()};
logger.severe(MessageFormat.format(EXCEPTION_MESSAGE, args));
throw new DataAccessException("Failed to grant object privilege.", dae);
3)
// example Query code
Object object = null;
ExpressionBuilder eb = new ExpressionBuilder();
Expression exp = eb.get(queryKeys[0]).equal(keyValues[0]);
for (int i = 1; i < queryKeys.length; i++)
exp = exp.and(eb.get(queryKeys[i]).equal(keyValues[i]));
// check if need to add authorization filter
if (authorizer.requiresCheck(domainClass) == true)
// this is where the authorization filter is appended to query
exp = exp.and(appendReadFilter());
ReadObjectQuery query = new ReadObjectQuery(domainClass, exp);
SessionContext sc = mScm.getCurrentSessionContext();
if (TLTransactionManager.isInTransaction(sc.getUserId()))
// part of a larger transaction scenario
query.conformResultsInUnitOfWork();
else
// not part of a transaction
query.refreshIdentityMapResult();
query.cascadePrivateParts();
Session session = getSession();
object = session.executeQuery(query);
4)
// builds the authorzation filter
private Expression appendReadFilter()
ExpressionBuilder eb = new ExpressionBuilder();
Expression exp1 = eb.getTable("ALL_OBJECT_PRIVILEGES").getField("xdoobject_id");
Expression exp2 = eb.getTable("ALL_OBJECT_PRIVILEGES").getField("user_id");
Expression exp3 = eb.getTable("ALL_OBJECT_PRIVILEGES").getField("privilege");
Vector args = new Vector();
args.add(READ_PRIVILEGE_VALUE);
Expression exp4 =
exp3.getFunctionWithArguments("bitand",args).equal(READ_PRIVILEGE_VALUE);
SessionContext sc = mScm.getCurrentSessionContext();
return eb.get("ID").equal(exp1).and(exp2.equal(sc.getUserId()).and(exp4));
// helper to get Toplink Session
private Session getSession() throws DataAccessException
SessionContext sc = mScm.getCurrentSessionContext();
Session session = TLTransactionManager.getActiveTransaction(sc.getUserId());
if (session == null)
session = TLSessionFactory.getSession();
return session;
// method of TLTransactionManager, provides easy access to TLSession
// which handles Toplink Sessions and is a singleton
public static UnitOfWork getActiveTransaction(String userId)
throws DataAccessException
TLSession tls = TLSession.getInstance();
return tls.getTransaction(userId);
// the TLSession method, returns the active transaction (UOW)
// or null if none
public UnitOfWork getTransaction(String uid) {
UnitOfWork uow = null;
UowWrapper uw = (UowWrapper)mTransactions.get(uid);
if (uw != null) {
uow = uw.getUow();
return uow;
Thanks!
-Tim

Point-in-polygon query with SDO_GEOMETRY.RELATE

Hello All,
I'm trying to perform a simple point-in-polygon query using
SDO_GEOMETRY.RELATE. Only the "anyinteract" mask seems to return
the correct answer. Can someone point out what I'm doing wrong
and/or suggest a better way to do this. My objective is simply
to return a count of the number of features in the point table
that fall with the selected feature in the polygon table.
select count(*) count from pnttest pnt, polytest poly,
user_sdo_geom_metadata m where SDO_GEOM.RELATE(pnt.shape,
m.diminfo, 'anyinteract',poly.shape,m.diminfo) = 'TRUE'
and m.table_name = 'POLYTEST' and m.column_name = 'SHAPE' and
poly.ADMIN_NAME = 'California'
I would have thought the "inside" mask would be what I want but
it returns 0 instead of the correct answer of 6.
Thanks for any help or suggestions!
-- john

Hi John,
If I wanted to do this as fast as possible, and didn't mind
returning points that touch the boundary of the polygon, I would
do something like this (assuming the point layer is indexed):
select /*+ ordered */count(*) count
from polytest poly, pnttest pnt
where SDO_RELATE(pnt.shape,poly.shape,
'mask=anyinteract querytype=window') = 'TRUE'
and poly.ADMIN_NAME = 'California';
If you are wondering what relationship Oracle Spatial thinks
there is between the 6 points and the state, try using the
determine mask with the 6 geometries that return from
anyinteract.
If you are using Oracle Spatial pre-9i, you might also want to
add layer_gtype=point in the quotes.
Hope this is useful.
dan

Issue While executing the Query for Pagination using ROWNUM with like

Issue While executing the Query for Pagination using ROWNUM with like.
Database is Oracle11G.
Oracle Database Table contains 8-9 lakh records
1) SQL equal (=)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920'
Execution Time:- 0.00869245 seconds
Returns 2 resultsets
2) SQL like (one %)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE = 'KMF22600920%'
Execution Time:- 0.01094301 seconds
Returns 2 resultsets
3) SQL like (two%)
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE A.REFERENCE like '%KMF22600920%'
Execution Time:- 6.43989658 seconds
Returns 2 resultsets
In Pagination, we are using Modified version of SQL Query 3) with ROWNUM as mentioned below :-
4) SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) WHERE RNUM > 0
Execution Time:- Infinite
ResultSets:- No as execution time is infinite
a) Instead of like if we use = in the above query it is returning the 2 resultsets (execution time 0.02699282 seconds)
b) Instead of two % in the above query, if use one example REFERENCE like 'KMF22600920%' it is returning the 2 resultsets (execution time 0.03313019 seconds)
Issue:- When using two % in like in the above query i.e. REFERENCE like '%KMF22600920%' AND ROWNUM <= 20 ) , it is going to infinite.
Could you please let us know what is the issue with two % used in like and rownum
5) Modified version of Option1 query (move out the RNUM condition AND RNUM <= 20)
SELECT * FROM (
SELECT /*+ FIRST_ROWS(n) */ ROWNUM RNUM, A.* FROM LINE A
WHERE REFERENCE like '%KMF22600920%' ) WHERE RNUM > 0 AND RNUM <= 20
Execution Time:- 7.41368914 seconds
Returns 2 resultsets
Is the above query is best optimized query which should be used for the Pagination or still can improve on this ?

This would be easier to diagnose if there was an explain plan posted for the 'good' and 'bad' queries. Generally speaking using '%' on both sides precludes the use of any indexes.

Af:query for master detail

Hi Experts,
Can we have an af:query to show master detail data ?
What we generally have is af:query showing records of 1 table. What i want is for the records that get populated from af:query in the master table, i want to show the records in the detail table of the row selected
any idea ?
thnks

Thank you NewBee. It worked and am able to get the detail information from the master table. I am struggling with another implementation. I have 3 radio buttons in the global template which I am referencing in all my pages.
The template has 3 radio buttons. Contacts, Plans and Users. The three queries are completely different from one another.
On click of Contacts, I should display the respective af:query for Contacts, Plans and Users without displaying the resultant table. This query panel will be global to all the pages.
I have tried setting it as follows:
<af:panelGroupLayout layout="vertical"
id="pt_pgl3"
rendered="#{baseBean.searchContactsSelected == 'true'}"
visible="#{baseBean.searchContactsSelected == 'true'}">
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.GloablSearchByContactsVOCriteriaQuery.queryDescriptor}"
model="#{bindings.GloablSearchByContactsVOCriteriaQuery.queryModel}"
queryListener="#{bindings.GloablSearchByContactsVOCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.GloablSearchByContactsVOCriteriaQuery.processQueryOperation}"
resultComponentId="::contactSearch:md1"/>
<f:subview id="contactSearch">
<jsp:include page="/contactsSearchResults.jspx"/>
</f:subview>
<af:panelGroupLayout>
I have tried various implementations to the best of my knowledge but its not rendering. Is it possible to navigate to a different jspx on click of Search button of af:query. This will give me an opportunity to display different pages based on the Search action and keeping the search on a global level.
Hope I was clear in explaining the issue
Thanks!

General Query for CO related to PS

Similar Messages

Maybe you are looking for