General Trip Data Paid by Company

Hi Experts,
I have entered Expences (Paid by Company& Reimburse Employee) In PR05 and saved it. but in the report Trip General data S_AHR_61016269 its dispalying 0 (Zero ) for the amount for Paid by Company Expence.
and i have used Optmizier option in the selection but no use. please suggest me the right solution.
Thanks ,
Sri

Hi,
I have tested with Optimizer ON as well as OFF mode but in bothe the modes its dispalying Paid by Company amount as 0 (Zero)
Thanks,
Sri.

Similar Messages

GENERAL TRIP DATA /TRIP TOTALS (S_AHR_61016401)

Hi all,
I need your assistance on this.
There is a user that is not able to execute report GENERAL TRIP DATA /TRIP TOTALS (S_AHR_61016401) to look for others personal numbers.
She needs to use this report because she is responsible for car fleet to monitor mileage.
Her employee number 29500569 come by default and it cannot be deleted . do you know how can unblock this field?
Thanks in advance

Hello Lupa,
Please clarify your requirement. As I understand, this staff member's personnel number automatically populates in the said report criteria.
1. Need to know SAP version ?
2. Whether or not this designated staff member running the report or someone else running ?
3. What is the profile given to this designated staff member.
4. Whether or not you require this designated staff member to run the report for few/all company codes ?
Please provide more info to be able to suggest.
CONMJI

Layout and output S_AHR_61016403 - trip receipts without general trip data

Hello all,
in the report S_AHR_61016403 - trip receipts without general trip data you can't select field name 'location' and 'business partner'. You can select it through a dynamic selection: shift + F4.
Nonetheless, when you run the report (F8) you still have to change the layout to have a display of 'location' and 'business partner'.
My question is why after altering all those settings, the fields are blank in the report.
I have checked with PR05 and table V_PTRV_SREC to see if those field were actually filled in. They were filled in and had values. So, i would like to know why this report doesn't take into account 'location' and 'business partner'? Are there more settings I have to alter?
Thanks for looking into this.
Regards,
Pamela

Hello Pamela,
If the values are there, it should also be there in the report.
Here is what you need to do:
Start the report -> select the fields in the layout -> save the layout list -> run the report again and this time under the "layout field" enter the layout name you have save on which the new fields are define.
Regards,
Raynard

Paid by Company CC receipts posted to FI

Iu2019m trying to resolve the following issue. Thank you for any advice or guidance you can provide.
My company has been using Travel Management to process out of pocket receipts, reimbursed to the employee for quite a few years; we are now looking at bringing in our P-Card transactions (Paid by Company) and have them attached to the trip reports, and posted in FI
The piece of the configuration that is giving me a problem is getting the u201CPaid by Companyu201D CC receipts posted to FI. SAPu2019s documentation u201CPERSONAL CORPORATE CREDIT CARD WITH SETTLEMENT VIA CENTRAL COMPANY ACCOUNTu201D walks through what Iu2019ve need, but it unclear on how to handle the posting that is described in the doc. The doc show that we should be able to configure the u201CPaid by Companyu201D CC receipts to DEBIT expense (cost object+GL) and CREDIT a clearing GL for paid receipts.
I have the wage types configured for the expense side, but it appears that the offsetting entry is configured in the HRP transaction in the IMG u201CConversion of Symbolic Account to Expense Accountu201D Again; weu2019ve been using employee vendor acct. for some years, so I already have present HRP config with 1RR - *KP, the IMG documentation for this activity says to use a clearing account to add the config. 1RR u2013 (GL clearing acct.), however SAP will only take one entry with 1RR here and, the posting keys have already been defined for vendors, so it doesnu2019t like a GL account here itu2019s looking for a vendor account.
The ideal FI posting for us would be from an employee trip would be to have the out of pocket receipts post a DEBIT on the cost object, CREDIT employee vendor (already using), then for the u201CPaid by Companyu201D CC receipts post a DEBIT on the cost object, CREDIT a clearing GL account for paid receipts.
Again any advise or guidance would be greatly appreciated.

Hello Don,
Posting this on the assumption that you are still experiencing the issue.
What you currently have is the expense type linked to wage type and wage type to symbolic account. This symbolic account is again linked to General Ledger account.
If you want to start using 'Paid by Company' expense types, you need to define clearing account to this symbolic account so that when the posting is completed from TM module to FI, it does NOT hit vendor account(AP) but it hit a balance sheet account which can be a suspese/clearing account maintained in COA.
The potential entries would be:
1. when the trip is posted for 'Paid By Co':
Dr. P& L Expense Head(cost object)
Cr. Clearing or suspense account
2. When the CC/vendor invoice is entered as FI:
Dr.Clearing/Suspense A/c
Cr. Vendor A/c(AP Ledger)
3. When the actual payment is made to vendor:
Dr.Vendor a/c
Cr. Cash/Bank Clearing a/c etc.
We have a scenario where in a given trip, if 'Paid By Co' and 'Out of Pocket Exp' are selected, the respective portion would be dealt with as per configuration.
Let me know if you require further.
Rgds
CONMJI

Expense types for paid by company and reimburse to employee

I have a question regarding expense types. Should we create separate Expense types for "paid by company" and "reimburse to employee" or is there a way to use the same expense type to both "paid by company" and "reimburse to employee"? Ex: "Hotel - Company paid" and "Hotel-Reimburse to employee" should be separate expense types or can we achieve this with say one expense type "Hotel"?

Hi,
It can be done with single expense type (i.e Hotel Expenses paid)..
Then you need to Define Service Provider ( 01 Self Paid, 02 Company Paid) (V_T702K)
Assignment of trip expense type to wage type depending on service provider
Assignment of symbolic accounts to wage types
Conversion of symbolic account to expense account..
In will automatically credits Employee vendor or Company account based on selection in PR05 ( 01 Self Paid, 02 Company Paid)
Hopes it would serve your purpose.
Regards,
Muhammad Umer

How to Maintain the MM Master Data from one company code to other co code

Hi Experts,
Can any one pls tell me how to Maintain the MM Master Data from one company code to other co code.
Presently we created New plants,New Purchase Orgs under different company code.
1) Material Master data
2) Vendor MAster data
3) PIR
4) Source List
Is there any standard Transactions...??
Please reply.
Brgds,
KK

Hi
Check out the link -
http://wiki.sdn.sap.com/wiki/display/ABAP/StepstocreateasimpleLSMWusingbatchinput+recording
lsmw for data migration for xk01 transaction
http://www.sap-img.com/general/lsmw-steps-for-data-migration.htm
Regards
Anand

General Master data issue

Hello Good People!
How can I address this issue..................... The general master data of the G/L account is not maintained in the chart of accounts INT. ...... Please highlight steps to address this issue
Thanks
Note : Please post question clearly along with error message to enable quick responses,
also search forum before posting.
Edited by: Jeyakanthan A on Aug 19, 2011 10:04 AM

Hi,
What I understood here G/L account is not created for chart of account INT.
So create G/L account through T-code FS00 for your company code and make necessary assignment in OBYC for the G/L account.
Regards

Extract data of a company within the same client.

Hi gurus. If I have more than one company configured in the same client in the ERP, Is there any way to extract data of only one of those companys in order to transfer or copy this information in other ERP?.
I've listened about TDMS but I'm looking for any procedure or tool that ensure that only the data of one company of multiples is extracted.
Thanks a lot!. Greetings from Colombia.

Hi,
Could you please clarify what all data you want to extract. Is it master data ?
Incase you want to extract master data to any external system you can you SAP standard IDOCs using ALE.
Also you can put a filter in the distribution model to filter the extract data only to relvant company codes.
Thanks
Neel

Fax PO attachments along with general header data using smartforms

Hi all,
I have a requirement which is as follows in ECC 6 system.
When the purchase order is sent to the vendor through fax, it should also include the attchemnts that are in the Purchase order along with the general header data for the purchase order.
Thanks and Regards,
Sireesha

Hi Mick,
Your thread seems to be linked to this one which is in process.
In FAX & Print of PO attachment not coming
Kind regards,
Yann

Error F5507 on MIRO. "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000"

I was doing a MIRO w.r.t PO. I was getting the following error - "The general master data of the G/L account 161000 is not maintained in the chart of accounts 1000." I later went ahead and created the GL Account in the COA. now the error is recitified. But, I would like to know what happens in the background.
Could someone explain me this? How is the G/L account determined?

Hi,
At the time of MIRO system posts below Accounting Entry:
GR\IR Clearing Account Dr--> This will be picked from t-code OBYC- key WRX
Vendor Account Cr--this will be picked from vendor master data
If there are any tax or TDS involved then system post to those accounts as well.
I guess 161000 is your recon account? Because if it is GR\IR then you would have got error at the tim e of MIGO ( if you have already done that)
Hope this is clear to you.
Br,Vivek

Excise duty: error 9914 No material data maintained for company code

Dear all,
when executing transaction /BEV2/EDDS I get error 9914 No material data maintained for company code in some material documents.
However, I see material is correct.
Can you tell me which views of material master am I missing?
What do I need to check?
Thanks in advance,
F

Settings in material master "Basic view 1"

Want to block users from editing the trip data once it is transferred to FI

Hi All,
We have a situation where users can change their trip data even when trip is transferred to FI.
I assume some authorization needs to be taken back from the users.
But Want to know the Details of that Authorization Object so that I can ask our User Access Management team to take necessary action.
Plz provide your valuable suggestions on the same.
Regards
Nitin

Hi,
Authorization object P_TRAVL and authorization field AUTHF
Following Status should be given to user if editing is not allowed after posting to FI..
There is a parameter Operation and "Old Status" , its 3rd position shall NOT be 4
For more information, please find below help
http://help.sap.com/saphelp_470/helpdata/en/b6/cda0db49e911d189060000e8322f96/frameset.htm
I hope it would serve your purpose...
Best Regards,
Muhammad Umer

How to upload company code data related to Company Code BP01?

How to upload company code data related to Company Code BP01 FOR CIN?

Hi,
First check whether all the pre-requisites are completed.
I'm assuming you have installed the Best Practices Baseline package (for country IN). If you have succeeded in actvating the buildig blocks (as per your scope) using Solution Builder, you would have populated all the company code data related to Co. code BP01. Looks like some steps are missing.
Please refer to the OSS note 1408706 in this regard. From there, you also can refer to the "Quick Guide to Implementing the SAP Best Practices Baseline Package V1.604 (DE), which is self-explanatory.
Let me know if this helps.

Re : Organizational data for inter-company billing

Hi
While doing intercompany settings (img - enterprice structure - SD - assign sales org - disribution plant) i am getting the following error
" Organizational data for inter-company billing
missing in plant SUDA "
How to solve.
Thanks
Anto

Hi Anto,
IMG check wheather you assing Supplying company sales area to Supplying plant.
IMG->Saes&Dsitr -> Billing -> InterCompany Billing-> Assign Organizational unit by Plant
Select Plant (supplying company) and assign Sales org, Distbn Channel and Division of supplying company.
Regards,
M.Manickam

Organizational data for inter-company billing missing in plant 2200

Organizational data for inter-company billing missing in plant 2200

Dear Siva,
This may be related to incompleteness in the inter -company billing configuration settings so go through this IMG path then do the proper settings,
SPRO>Sales and distribution>Billing>Inter company billing>Assign organisational units by plant, here you need to assign the Sales organisation,Distributional channel and Division (sales area) to the 2200 plant.
Now you try
I hope it will help you
Regards,
Murali.

General Trip Data Paid by Company

Similar Messages

Maybe you are looking for