Generate .bin files

I'm using LVE for ARM 2009 with the EK-LM3s8962. I would like to flash my compiled app as a .bin file. If I run any of the Keil examples, then a .bin file is created, and gets flashed. Is there a way to make LabVIEW create a similar .bin file?
Regards,
Jeff

Hi Jeff,
LabVIEW is not creating the files, but
Keil/RealView is. You can still burn .axfs like .bins. If you show
uVision:
and
then modify the Options (Flash»Configure Flash Tools) and then click on
the Output tab you can tell Keil to create a .hex too. Alternatively, if you modify the instructions found on this Keil page and insert the fromelf command into the "Run User Programs After Build/Rebuild" section of the User tab of the Target Options you can get the .bin file you are needing.
Joshua B.
National Instruments
NI Services
NI Support Resources
NI Training Resources

Similar Messages

What's the detailed GPS protol used to generated GPS bin file?

I encountered a problem recently.
) When we used actual GPS signals instead of simulated signals generated from the PXI-5671, the receiver functioned normally.
2) When we streamed bin file to generate signals repeatedly using the PXI-5671, the receiver could receive correctly for the first time, while at the rest of it the receiver couldn't receive the signals nor display how many satellites there were and what the signal strengths were.
The R&D engineers of the receiver in German want to know the detailed GPS protocol used to generated GPS bin file. They want to find the differences between the receiver and NI GPS generator.
Could you give me the detailed GPS protocol? thanks!

Hello,
In the ni GPS bin file ther header is is stored as following.
Of the first 8 bytes the first two bytes are version of GPS toolkit it was use to save the data, the next 4 bytes will be IQ rate, the next 4 bytes will be peak power in dBm and then rest 488 bytes will be just buffer data or 0 padding. Here is the screenshot of that. The actual data is stored as I16 format as I and Q data block. Hence the actual offset from the starting of the file is 512 bytes.
Hope this helps. For reference you can look at the niGPS Streaming From File.vi located in C:\Program Files\National Instruments\LabVIEW 2009\examples\RF Toolkits\GPS\Programming
Thanks
NI-khil
Message Edited by NIyer on 05-14-2010 12:40 PM

Adogjf Unable to generate jar files under JAVA_TOP error while patching

Hi,
I'm upgrading my version of Java from 1.3.1_19 to 1.5.0_17. I downloaded the jdk-1_5_0_17-linux-i586.bin file and unpackaged it to /u0/<SID>/<SID>db/10.2.0. It unpackaged it to a new directory jdk1.5.0_17 (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17), whereas the old version is in a directory jdk (/u0/<SID>/<SID>db/10.2.0/jdk).
Having done that I had to run an interoperability patch (4372996). Upon running this patch I received an error at the end:
adogjf() Unable to generate jar files under JAVA_TOP
There were no other errors.
I think the problem has to do with where my new java version is located but I'm not sure. I'm thinking that it's still looking under the old JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk) when I want it to look under the new JAVA_TOP (/u0/<SID>/<SID>db/10.2.0/jdk1.5.0_17). So, should I move the contents from the new directory (jdk1.5.0_17) to the old directory (jdk) or is there a way to 'point' it to the new JAVA_TOP.
Please let me know if I'm totally off base and there's another solution. We're currently on EBS 11.5.10.2, DB 10.2.0.4 and RHEL 4 Update 5.
Thanks,
Lia.

Here you go. Hope this helps you to help me :-). Thanks.
+
** Generating the product JAR files...
STRT_TASK: [Generate JAR files] [] [Fri Mar 27 2009 09:20:32]
STRT_TASK: [Generate JAR files under JAVA_TOP] [] [Fri Mar 27 2009 09:20:32]
Signing product JAR files in JAVA_TOP -
/u0/mary/marycomn/java
using entity Customer and certificate 1.
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
Successfully created javaVersionFile.
Generating product JAR files in JAVA_TOP -
/u0/mary/marycomn/java with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u0/mary/maryappl/admin/mary/out/genjars.cmd
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u0/mary/maryappl/ad/11.5.0/java/adjri.zip:/u0/mary/marycomn/util/jre/1.1.8/lib/rt.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/i18n.jar:/u0/mary/marycomn/util/jre/1.1.8/lib/tools.jar:/u0/mary/marycomn/java/appsborg.zip:/u0/mary/marycomn/java/apps.zip:/u0/mary/maryora/8.0.6/forms60/java:/u0/mary/marycomn/java"
Calling /u0/mary/marycomn/util/jre/1.1.8/bin/jre ...
The JDK version is 1.1.8
Validating the files/directories specified for -areas option
Validating the files/directories specified for -outputSpec option
Validating the directory specified for -lstDir option
About to Analyze the input areas : Fri Mar 27 2009 09:20:36
WARNING: Will not load stale resource unit META-INF/services/javax.xml.parsers
WARNING: Will not load stale resource unit META-INF/services/javax.xml.transform
Done Analyzing the input areas : Fri Mar 27 2009 09:20:43
About to Analyze/Generate jar files : Fri Mar 27 2009 09:20:43
About to Analyze fndnetcharts.jar : Fri Mar 27 2009 09:20:43
Up-to-date : fndnetcharts.jar
Done Analyzing fndnetcharts.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndtdg.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndtdg.jar
Done Analyzing fndtdg.jar : Fri Mar 27 2009 09:20:44
About to Analyze fndjgl.jar : Fri Mar 27 2009 09:20:44
Up-to-date : fndjgl.jar
Done Analyzing fndjgl.jar : Fri Mar 27 2009 09:20:45
About to Analyze fndjle.jar : Fri Mar 27 2009 09:20:45
Up-to-date : fndjle.jar
Done Analyzing fndjle.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndlrucache.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndlrucache.jar
Done Analyzing fndlrucache.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndgantt.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndgantt.jar
Done Analyzing fndgantt.jar : Fri Mar 27 2009 09:20:47
About to Analyze fndpromise.jar : Fri Mar 27 2009 09:20:47
Up-to-date : fndpromise.jar
Done Analyzing fndpromise.jar : Fri Mar 27 2009 09:20:48
About to Analyze fndforms.jar : Fri Mar 27 2009 09:20:48
About to Generate fndforms.jar : Fri Mar 27 2009 09:20:49
Done Generating fndforms.jar : Fri Mar 27 2009 09:20:50
About to Sign fndforms.jar : Fri Mar 27 2009 09:20:50
ERROR: Javakey subcommand exited with status 1
Javakey standard output:
Adding entry: META-INF/MANIFEST.MF
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java Key Generation
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Javakey error output:
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Successfully created javaVersionFile.
Customer not found in database.
java key error:
adjava -ms128m -mx256m sun.security.provider.Main -gs /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.tmp /u0/mary/marycomn/java/oracle/apps/fnd/jar/fndforms.jar.uns
The above Java program failed with error code 1.
Done Analyzing/Generating jar files : Fri Mar 27 2009 09:20:51
AD Run Java Command is complete.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Failed to generate product JAR files in JAVA_TOP -
/u0/mary/marycomn/java.
adogjf() Unable to generate jar files under JAVA_TOP
AutoPatch error:
Failed to generate the product JAR files
You should check the file
/u0/mary/maryappl/admin/mary/log/4372996.log
for errors.
+

Unable to generate PDF files

D:\dzbat\bin>genpdf
D:\dzbat\bin>javadoc -doclet com.sun.tools.doclets.mif.MIFDoclet -docletpath d:\
mifdoclet1.2\lib\mifdoclet.jar -J-Xmx20M -batch dzbatcher -print pdf -d d:\lsmap
isericsson\docs -sourcepath d:\lsmapisericsson com.mahindrabt.lsm
Loading source files for package com.mahindrabt.lsm...
Constructing Javadoc information...
MIF Doclet version 1.2 beta 2 (build date: 09 Aug 2002)
I installed mifdoclet1.2 and DZbatcher and tried to generate PDF file with the following batch file
javadoc -doclet com.sun.tools.doclets.mif.MIFDoclet -docletpath d:\mifdoclet1.2\lib\mifdoclet.jar -J-Xmx20M -batch dzbatcher -print pdf -d d:\lsmapisericsson\docs -sourcepath d:\lsmapisericsson com.mahindrabt.lsm
It gives the following output and does not genrate the PDF file and does not give any error. Is there any problem with my batch file? Please help me out from this.
Generating d:\lsmapisericsson\docs\mif\overview.mif...
Using default stylemap file...
Template Used: d:\lsmapisericsson\docs\mif\template.mif
Using default batchmap file...
Building tree for all the packages and classes...
Generating d:\lsmapisericsson\docs\fm\package-list...
Generating d:\lsmapisericsson\docs\mif\com.mahindrabt.lsm.mif...
Generating default overview page...
Generating d:\lsmapisericsson\docs\mif\almanac.mif...
Generating d:\lsmapisericsson\docs\mif\api.book.mif...
Generating d:\lsmapisericsson\docs\mif\mif-to-fm.batch...
Executing: dzbatcher -makername framemaker d:\lsmapisericsson\docs\mif\mif-to-fm
.batch...
Regards
Tushar

I see no problem with your batch file, and the messages
proceed properly. To troubleshoot this further, I suggest
you read the email (currently adjacent) titled:
"Error using MIF doclet to create PDFs".
It describes several different approaches, including
generating PS and using Distiller to generate PDF,
or trying dzbatcher with -v option to echo each
command to see where it stops.
Please let us know your results, as this seems to be
a common problem.
-Doug Kramer
Javadoc team

Error while generating JAR files during upgrade from 11.5.9 to 11.5.10

Hi,
We are getting the following issue after applying 11.5.9 CU2 patch set during the process of upgrade from 11.5.9 to 11.5.10.
- 3171663: 11.5.9 Oracle E-Business Suite Consolidated Update 2
Executing: /u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/bin/java -Djava.security.egd=file:/dev/urandom sun.security.tools.JarSigner -keystore ******** -storepass ******** -keypass ******** -sigfile CUST -signedjar /u01/app/tinst/tinstcomn/java/oracle/apps/fnd/jar/fnddssgraphgui.jar.sig /u01/app/tinst/tinstcomn/java/oracle/apps/fnd/jar/fnddssgraphgui.jar.uns CUSTOMER
ERROR: JarSigner subcommand exited with status 1
No standard output from jarsigner
JarSigner error output:
Exception in thread "main" java.lang.NoClassDefFoundError: sun/security/tools/JarSigner
Caused by: java.lang.ClassNotFoundException: sun.security.tools.JarSigner
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: sun.security.tools.JarSigner. Program will exit.
Can you please advice regarding this issue....????
Regards,
Sreenivasulu.

Please see these docs.
Generate Jar File causes NoClassDefFoundError sun/security/tools/JarSigner [ID 393306.1]
Generating Jar Files Fails with a NoClassDefFoundError: sun/security/tools/JarSigner Error [ID 801014.1]
Thanks,
Hussein

Swf2html.exe and infinite generated html files

Dear,
I use the tool swf2html.exe from Adobe for extracting textual content on .swf files.
Is there a way to avoid infinite iteration on such swf files : i.e. http://www.cartoondollemporium.com/superdollz/dollz/1012/doll.swf ?
The problem is that when I try to generate html file with that file in PHP, swf2html.exe made an infinite iterate and there is no way (except manualy cut the process) to stop for example on a max output file size generated.
Thanks of you have some tips to avoid or solve that extracting problem,
For test :
http://www.se-flash.com/cgi-bin/flash.pl?etape2=1
with http://www.jeuxclic.com/jeux/bubble_shooter.swf work.
http://www.se-flash.com/cgi-bin/flash.pl?etape2=1
with http://www.cartoondollemporium.com/superdollz/dollz/1012/doll.swf made infinite loop....
Stephane.

1) All you do is specify a directory with the -d option and Javadoc creates the directory structure below that. We often use either "-d docs" or "-d html" to create a directory named "docs" or "html" in the current directory.
2) Preferably they should be stored on a server that has a web server running so people can access them. We build the docs nightly on the development server where people can access the latest version using a file: URL (not with a web server). Then before each release we stage them on our intranet before we push them out to the intranet. We also run the DocCheck doclet and a link checker nightly so developers and writers can find errors in their documentation.
3) If you want a top-level page that links to separate javadoc documents, you need to do this manually. However, keep in mind that you can also inter-link all those separate documents by using the -link or -linkoffline option.
Let us know if you have more questions or comments.
-Doug Kramer
Javadoc team

Generating excel files using XSLT mapping

Hi All,
I am working on a proxy to file scenario and we have a requirement of generating .xls file in a spreadsheet format at FTP server.I have done xslt mappping for creating the excel file in spreadsheet.But getting following error in channel monitoring.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error occurred while connecting to the FTP server "phmysa-s3006.ap.novartis.net:21": java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'Workbook' found in document', probably configuration error in file adapter (XML parser error)'
XSLT Code Used:
<?xml version='1.0' ?>
<?mso-application progid="Excel.Sheet"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns="urn:schemas-microsoft-com:office:spreadsheet"
xmlns:o="urn:schemas-microsoft-com:office:office"
xmlns:x="urn:schemas-microsoft-com:office:excel"
xmlns:ss="urn:schemas-microsoft-com:office:spreadsheet"
xmlns:html="http://www.w3.org/TR/REC-html40">
<xsl:template match="DT_StockReports/*">
<Row>
<Cell>
<Data ss:Type="String">
<xsl:apply-templates/>
</Data>
</Cell>
</Row>
</xsl:template>
<xsl:template match="/">
<Workbook>
<DocumentProperties xmlns="urn:schemas-microsoft-com:office:office">
</DocumentProperties>
<ExcelWorkbook xmlns="urn:schemas-microsoft-com:office:excel">
<WindowHeight>10365</WindowHeight>
<WindowWidth>13260</WindowWidth>
<WindowTopX>120</WindowTopX>
<WindowTopY>60</WindowTopY>
<ProtectStructure>False</ProtectStructure>
<ProtectWindows>False</ProtectWindows>
</ExcelWorkbook>
<Styles>
<Style ss:ID="Default" ss:Name="Normal">
   <Alignment ss:Vertical="Bottom"/>
   <Borders/>
   <Font x:CharSet="512"/>
   <Interior/>
   <NumberFormat/>
   <Protection/>
</Style>
</Styles>
<Worksheet ss:Name="">
<Table ss:ExpandedColumnCount="40" ss:ExpandedRowCount="15000" x:FullColumns="40"
   x:FullRows="15000">
<xsl:apply-templates/>
</Table>
<WorksheetOptions xmlns="urn:schemas-microsoft-com:office:excel">
   <PageSetup>
    <PageMargins x:Bottom="0.984251969" x:Left="0.78740157499999996"
     x:Right="0.78740157499999996" x:Top="0.984251969"/>
   </PageSetup>
   <Selected/>
   <Panes>
    <Pane>
     <Number>40</Number>
     <ActiveRow>40</ActiveRow>
     <ActiveCol>15000</ActiveCol>
    </Pane>
   </Panes>
   <ProtectObjects>False</ProtectObjects>
   <ProtectScenarios>False</ProtectScenarios>
</WorksheetOptions>
</Worksheet>
</Workbook>
</xsl:template>
</xsl:stylesheet>
Thanks
Ayura

Input xml:
<?xml version="1.0" encoding="utf-8"?><n0:MT_StockReports xmlns:n0="urn:novartis.com:pi:ph:sp:LM_DD_501_LSP_L0X:StockReports" xmlns:prx="urn:sap.com:proxy:Q75:/1SAI/TASEF7C5F005BC07ECC0997:700:2008/06/25"><Header><Material></Material><MaterialDescription></MaterialDescription><MType></MType><Bin></Bin><Unit></Unit><MS></MS><LS></LS><Type></Type><PGr></PGr><ABC></ABC><Crcy></Crcy><Prc></Prc><Vendor></Vendor><VendorName></VendorName><VendMat></VendMat><ManufacturingPartN></ManufacturingPartN><Batch></Batch><BatchExpiryDate></BatchExpiryDate><Unrestr></Unrestr><SafetyStk></SafetyStk><MinSafStck></MinSafStck><MinLotSize></MinLotSize><MaxLotSize></MaxLotSize><MaxLevel></MaxLevel><ReorderPt></ReorderPt><TotalStock></TotalStock><TotalVal></TotalVal></Header><Records><Material>20001</Material><MaterialDescription>SIEVED NATEGLINIDE / DS.01 / DR</MaterialDescription><MType>ZPI</MType><Bin></Bin><Unit>KG</Unit><MS>40</MS><LS>HB</LS><Type>M0</Type><PGr>S01</PGr><ABC></ABC><Crcy>SGD</Crcy><Prc>S</Prc><Vendor>          </Vendor><VendorName></VendorName><VendMat></VendMat><ManufacturingPartN></ManufacturingPartN><Batch>SD0026</Batch><BatchExpiryDate>01.12.2011</BatchExpiryDate><Unrestr>49.803 </Unrestr><SafetyStk>0.000 </SafetyStk><MinSafStck>0.000 </MinSafStck><MinLotSize>110.000 </MinLotSize><MaxLotSize>550.000 </MaxLotSize><MaxLevel>1.000 </MaxLevel><ReorderPt>0.000 </ReorderPt><TotalStock>49.803 </TotalStock><TotalVal>1723.18 </TotalVal></Records></n0:MT_StockReports>
Edited by: Ayura Kanungo on Dec 28, 2011 7:11 AM

Dac not generating paramter files for unspecified mapping in one workflow

Hi,
We are facing a problem with DAC while generating parameter files.I have a task in DAC which is calling a workflow(It contains two sessions,1.SILOS mapping,2.SILOS_UNSPECIFIED mapping).
Both are using the same parameter file.
During Development DAC used to generate parameters for both sessions in the same file.Both now in diff environment,it is generating parameters for the first session
and for unspecified mapping it is not generating any parameters.So unspecified mappings are failing.
Any one help?

Please check whether the file parameterfileDW.txt has the section for that unspecified workflow. If not please copy and paste from DEV env and restart the load.
If it exists in parameterfileDW.txt and still not not generating section for unspecified session in parameter file then try running the below command at <infa_home>\server\bin
pmrep listobjectdependencies -n <WORKFLOW_NAME> -o workflow -f <FOLDER_NAME> -d session -p children
and see whether the output as your unspecified session and post your observations.
Mark If Helps

Generating Peak File for...

Wow, this has been going on for 3-4 hours already.
Unacceptable, and I can't find any reference to this process in the Adobe Docs for PP. I have no idea where it is in the process. Is it almost done? Does it have another 12 hours to go? What is the deal with this? I have not touched my computer in hours.
I have a PP Project with about 10 bins with about 1 hour of video in each.
Should I break my project down so I have 10 PP files with 1 hour of video per project?
I was hoping to keep everything in one PP file, but that is looking like a really bad idea right now. I don't remember having to suffer through anything like with when working with Final Cut Pro.
Will these stupid Peak Files be saved? Is there a chance they will get corrupt and have to regenerate? This took a whole half day, and more, since it's still ongoing. This is on my MBP 2.4GHz. If I want to move the files back and forth between my laptop and my Windows Core i7 920 desktop (I have Production Premium on both platforms), will I have to suffer the Peak File Generation everytime?
All video was captured in OnLocation, straight from the camera. That part of the process seemed really cool. This part with the Peak File is really lame.
Any tips on getting to a workable workflow with PP, or should I just bag it, and buy another editor (Final Cut Express would even probably do the simple cut edits I want to do) ? I do most everything in After Effects.

count_schemula wrote:
The solution? I'm going to edit on my windows desktop.
OMG, what have I gotten myself into?
Same problem on my PC. Premiere Pro 4.2 on Windows 7 64 bit. Freshly installed. All legit software.
I made a new project, import all the video, and let it generate all peak files.
It finishes. Close Premeire. Open Premiere... Generating Peak File for...
My heart sinks so low.
I delete the .pek files and the database files and in the preferences, I set it to save cache and database files to a folder within my project folder.
It dutifully generates all new .pek file and database files. I watch it write them one by one. It does not write anything in the original Adobe shared cache folders. It completes. I quickly edit up one segment, just so I have some work to show for my 4 days of messing around with this.
Close Premiere. Open Premiere.
Generating Peak File for...
I'm speechless.
Footage was captured to disc using OnLocation on a Mac from a Panasonic AG-HVX200a via fireware.
If you want to call me an idiot, point out where I'm not doing something right.
If you want to blame my rig(s) just know that I push these systems hard daily with ZERO issues in other apps.
I'm blaming Premiere at this point. Something about how this program works is just not right. In both cases it writes over already existing .pek files. I have 4 channels per clip, so 4 .pek files for every clip I have. It's towards 1000. pek files.

BIN file preparation for Zynq Linux FPGA load to /dev/xdevcfg

hello,
I want to automatically generate a .bin file so that I can use "cat top.bit.bin > /dev/xdevcfg" in linux running on the Zynq.
I see that promgen is not part of Vivado. Is there a way to use write_cfgmem in Vivado to generate a correct .bin file from the .bit file?
I would just like to add that command to the end of my compile script so that I get the .bin file automatically. I tried this but I don't think it makes the correct file.
write_cfgmem -force -format BIN -size 256 -interface SMAPx32 -loadbit "up 0x0 ./results/top.bit" -verbose ./results/top.bit.bin

This command worked for me.
write_cfgmem -disablebitswap -force -format BIN -size 256 -interface SMAPx32 -loadbit "up 0x0 ./results/top.bit" -verbose ./results/top.bit.bin

B1if generate Zip file

Hello Experts,
Is there a way to generate an .ZIP file within a Step in B1if?
Basically I need to generata an ZIP file with documents created in B1if Step.
Thanks in advance.
Pierre

Thanks to Maria Trinidad from SAP I had what I want and I'm ready to share.
Here's how I made it work:
Generate your file/s
Read your file/s with a GetFile atom (in my case PDFs, so I use bin as Payload Type)
xsl:copy the GetFile payload into the predecessor of the StoreFile atom
Here is my Processing Flow:
GetFile atom details:
the xform (atom2.xsl) transformation:
<xsl:template name="transform">
     <bfa:io pltype="zip">
          <bfa:zipentry
               entryname="test.pdf" dataset="" group="" docname="" alias="" pltype="bin" properties="">
               <xsl:copy-of select="/vpf:Msg/vpf:Body/vpf:Payload[./@id='atom3']/bfa:io" />
          </bfa:zipentry>
     </bfa:io>
</xsl:template>
StoreFile atom details:
et Voilà I've got a freshly new test0000.zip file containing test.pdf in my c:/tmp directory.
This scenario step is not performing like a flash because of bin to char conversion so use your precautions, anyway it did the work fine for me.
Thanks again Maria for helpful info, hope this can help.
Regards
Pierre

Reports 6.0 and Parameter Lists and Generate to File

I am using the run_product built in from Forms 6.0 and opening
up a report passing it several parameters via a parameter list.
Everything works great when previewing the report.
There is the option in the report preview under File -> Generate
to File. When I generate a report to file using any type of
format it appears that the report does not use the parameters
that I passed in originally from the form. It appears that it
looses all the parameters I passed in. This is most concerning
to me. Am I doing something wrong or is this a "feature" I
didn't know about? I really would like users to have this
ability.
null

Yes I guess this will work, but the option to generate to file
is extremely misleading if you ask me. This option should
generate the current report with the current parameters. This
is unacceptable as far as I am concerned and should be
considered a bug. Oracle needs to give us more control over
FORMS and REPORTS into all too many situations I have been
frustrated because I am not able to do something that I want to
do.
I feel in general REPORTS object is very limited compared to
crystal reports....
Dan Paulsen (guest) wrote:
: Give the user the option on the calling form whether to save
the
: report to file or just view it. If they want to save to file,
: pass the parameter to save to file when you call the report
and
: suppress the parameter form, this will eliminate the problem.
: Spencer Tabbert (guest) wrote:
: : I am using the run_product built in from Forms 6.0 and
opening
: : up a report passing it several parameters via a parameter
: list.
: : Everything works great when previewing the report.
: : There is the option in the report preview under File ->
: Generate
: : to File. When I generate a report to file using any type of
: : format it appears that the report does not use the
parameters
: : that I passed in originally from the form. It appears that
it
: : looses all the parameters I passed in. This is most
: concerning
: : to me. Am I doing something wrong or is this a "feature" I
: : didn't know about? I really would like users to have this
: : ability.
null

Am getting message from MacPro that my start up disc is full - but I can't find it and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files. help?

I am getting message from MacPro that my start up disc is full - but I can't find this "start up disc" and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files and material that I should toss in the trash, but it is not clear to me what items I can toss and which items I can't toss. Can you help? Using the imovie "help" support the system showed me under the menu item "go" where the "start up disc" should be - but that wasn't actually available on my menu! Thanks for your help!

Disk Utility
Get Info on the icon on Desktop
Try to move this to the MacBook Pro forum
Your boot drive should be 30% free to really perform properly. 10% minimum
Backup, clone, use TimeMachine, use another drive for your projects and movies, replace and upgrade the internal drive even.

Writing a java program for generating .pdf file with the data of MS-Excel .

Hi all,
My object is write a java program so tht...it'll generate the .pdf file after retriving the data from MS-Excel file.
I used POI HSSF to read the data from MS-Excel and used iText to generate .pdf file:
My Program is:
* Created on Apr 13, 2005
* TODO To change the template for this generated file go to
* Window - Preferences - Java - Code Style - Code Templates
package forums;
import java.io.*;
import java.awt.Color;
import com.lowagie.text.*;
import com.lowagie.text.pdf.*;
import com.lowagie.text.Font.*;
import com.lowagie.text.pdf.MultiColumnText;
import com.lowagie.text.Phrase.*;
import net.sf.hibernate.mapping.Array;
import org.apache.poi.hssf.*;
import org.apache.poi.poifs.filesystem.*;
import org.apache.poi.hssf.usermodel.*;
import com.lowagie.text.Phrase.*;
import java.util.Iterator;
* Generates a simple 'Hello World' PDF file.
* @author blowagie
public class pdfgenerator {
     * Generates a PDF file with the text 'Hello World'
     * @param args no arguments needed here
     public static void main(String[] args) {
          System.out.println("Hello World");
          Rectangle pageSize = new Rectangle(916, 1592);
                    pageSize.setBackgroundColor(new java.awt.Color(0xFF, 0xFF, 0xDE));
          // step 1: creation of a document-object
          //Document document = new Document(pageSize);
          Document document = new Document(pageSize, 132, 164, 108, 108);
          try {
               // step 2:
               // we create a writer that listens to the document
               // and directs a PDF-stream to a file
               PdfWriter writer =PdfWriter.getInstance(document,new FileOutputStream("c:\\weeklystatus.pdf"));
               writer.setEncryption(PdfWriter.STRENGTH128BITS, "Hello", "World", PdfWriter.AllowCopy | PdfWriter.AllowPrinting);
//               step 3: we open the document
                         document.open();
               Paragraph paragraph = new Paragraph("",new Font(Font.TIMES_ROMAN, 13, Font.BOLDITALIC, new Color(0, 0, 255)));
               POIFSFileSystem pofilesystem=new POIFSFileSystem(new FileInputStream("D:\\ESM\\plans\\weekly report(31-01..04-02).xls"));
               HSSFWorkbook hbook=new HSSFWorkbook(pofilesystem);
               HSSFSheet hsheet=hbook.getSheetAt(0);//.createSheet();
               Iterator rows = hsheet.rowIterator();
                              while( rows.hasNext() ) {
                                   Phrase phrase=new Phrase();
                                   HSSFRow row = (HSSFRow) rows.next();
                                   //System.out.println( "Row #" + row.getRowNum());
                                   // Iterate over each cell in the row and print out the cell's content
                                   Iterator cells = row.cellIterator();
                                   while( cells.hasNext() ) {
                                        HSSFCell cell = (HSSFCell) cells.next();
                                        //System.out.println( "Cell #" + cell.getCellNum() );
                                        switch ( cell.getCellType() ) {
                                             case HSSFCell.CELL_TYPE_STRING:
                                             String stringcell=cell.getStringCellValue ()+" ";
                                             writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                             phrase.add(stringcell);
                                        // document.add(new Phrase(string));
                                                  System.out.print( cell.getStringCellValue () );
                                                  break;
                                             case HSSFCell.CELL_TYPE_FORMULA:
                                                       String stringdate=cell.getCellFormula()+" ";
                                                       writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                       phrase.add(stringdate);
                                             System.out.print( cell.getCellFormula() );
                                                       break;
                                             case HSSFCell.CELL_TYPE_NUMERIC:
                                             String string=String.valueOf(cell.getNumericCellValue())+" ";
                                                  writer.setSpaceCharRatio(PdfWriter.NO_SPACE_CHAR_RATIO);
                                                  phrase.add(string);
                                                  System.out.print( cell.getNumericCellValue() );
                                                  break;
                                             default:
                                                  //System.out.println( "unsuported sell type" );
                                                  break;
                                   document.add(new Paragraph(phrase));
                                   document.add(new Paragraph("\n \n \n"));
               // step 4: we add a paragraph to the document
          } catch (DocumentException de) {
               System.err.println(de.getMessage());
          } catch (IOException ioe) {
               System.err.println(ioe.getMessage());
          // step 5: we close the document
          document.close();
My Input from MS-Excel file is:
     Planning and Tracking Template for Interns
     Name of the Intern     N.Kesavulu Reddy
     Project Name     Enterprise Sales and Marketing
     Description     Estimated Effort in Hrs     Planned/Replanned          Actual          Actual Effort in Hrs     Complexity     Priority     LOC written new & modified     % work completion     Status     Rework     Remarks
S.No               Start Date     End Date     Start Date     End Date
1     setup the configuration          31/01/2005     1/2/2005     31/01/2005     1/2/2005
2     Deploying an application through Tapestry, Spring, Hibernate          2/2/2005     2/2/2005     2/2/2005     2/2/2005
3     Gone through Componentization and Cxprice application          3/2/2005     3/2/2005     3/2/2005     3/2/2005
4     Attend the sessions(tapestry,spring, hibernate), QBA          4/2/2005     4/2/2005     4/2/2005     4/2/2005
     The o/p I'm gettint in .pdf file is:
Planning and Tracking Template for Interns
N.Kesavulu Reddy Name of the Intern
Enterprise Sales and Marketing Project Name
Remarks Rework Status % work completion LOC written new & modified Priority
Complexity Actual Effort in Hrs Actual Planned/Replanned Estimated Effort in Hrs Description
End Date Start Date End Date Start Date S.No
38354.0 31/01/2005 38354.0 31/01/2005 setup the configuration 1.0
38385.0 38385.0 38385.0 38385.0 Deploying an application through Tapestry, Spring, Hibernate
2.0
38413.0 38413.0 38413.0 38413.0 Gone through Componentization and Cxprice application
3.0
38444.0 38444.0 38444.0 38444.0 Attend the sessions(tapestry,spring, hibernate), QBA 4.0
                                   The issues i'm facing are:
When it is reading a row from MS-Excel it is writing to the .pdf file from last cell to first cell.( 2 cell in 1 place, 1 cell in 2 place like if the row has two cells with data as : Name of the Intern: Kesavulu Reddy then it is writing to the .pdf file as Kesavulu Reddy Name of Intern)
and the second issue is:
It is not recognizing the date format..it is recognizing the date in first row only......
Plz Tell me wht is the solution for this...
Regards
[email protected]

Don't double post your question:
http://forum.java.sun.com/thread.jspa?threadID=617605&messageID=3450899#3450899
/Kaj

Report: generate to file pdf format

Hi folks,
I have made a report which displays all data on preview and on printer. But when I use generate to file PDF option it misses data from columns at right hand side. The report has more than 15 columns and uses smaller font size.
Kindly somebody help me in this regards.
Tahir Abbas

Do the column headings display ok but the data does not?
If so it may be related to the font size. i.e. the whole report may not fit on the page when scaled for pdf output.

Generate .bin files

Similar Messages

Maybe you are looking for