Generate query list by Infoproviders

Hello,
Is there a way to generate an organised list of queries by Infoproviders which is easier to export to a MS Excel other than from tables and repository.
Thank you,
Justin Maller

Hello Justin,
Check this thread...
[Re: how can i see all queries on one cube...?(query list)|Re: how can i see all queries on one cube...?(query list)]
Alternatively you might be able to achieve this using an ABAP program.
Hope this helps.....
Regards,
CT

Similar Messages

How to generate a list of Devices based upon an eDir group

Is there a way for us to generate a report/query of devices (we need model, etc) where the calculated user for each device is a member of an eDirectory group?
Basically, we need to generate a list of machines in our "HR" department or "Finance" department, etc.
Any clever ideas?
-Brian

bpedrant,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Doubt in RSRT regarding generate query.

Hi All,
I have a doubt in transaction code RSRT (Query monitor). Under the tab environment, there are 2 options.
1) Generate queries.
2) Gen.Queries directly as shown below.
i.e in RSRT> Environment> Generate Query
and RSRT> Environment> Gen. Query directly.
I would like to know what the functions of these two options are and what they do?
And also would like to know how these 2 are different from generate report.
I know generate report means regeneration of query, but what does regeneration of query actually do?

1) generate queries = generate the query @ next call.
This means it does not gets generated unless the query is called by a workbook, web template,...
2) Directly: generates the selected queries directly.
Generation of a query: a query is in fact an ABAP program. This program is created by the BI system.
To generate a query is to 'create' the ABAP program for the query.
You can also delete the old ABAP's (old versions):
environment -> delete old ABAPs

BI server generating query in a different way between two instances

Hi All,
We have executed a report in dev,test instances,BI server generated query in a different way in two instances where as dev BI server is on AIX operating system(recently we migrated from windows),test instance is on still on Windows environment.
For a report below are the queries
DEV(AIX)
WITH
SAWITH0 AS (select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end )
select distinct SAWITH0.c2 as c1,
SAWITH0.c3 as c2,
SAWITH0.c4 as c3,
SAWITH0.c5 as c4,
SAWITH0.c5 as c5,
SAWITH0.c6 as c6,
SAWITH0.c7 as c7,
SAWITH0.c1 as c8
from
SAWITH0
order by c1, c6
Test(Windows)
select distinct D1.c2 as c1,
D1.c3 as c2,
D1.c4 as c3,
D1.c5 as c4,
D1.c5 as c5,
D1.c6 as c6,
D1.c7 as c7,
D1.c1 as c8
from
(select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end
) D1
order by c1, c6
If we observe test query is very simple and easy to back track but in Dev it is appending like sawwith0,sawwith1 etc..looking difficult.
Is there in any configuration to change to generate query like Test(with out SAWWITH0).
NOTE:Any how results are same in both instances.
Please help me to resolve this issue.
Thank You,
Anil Kumar.

Anil,
Are your database settings the same in both of the rpds dev and test?
Check wether you didn't change anything to the default. Open your RDP double click on the Database in the physical layer and go to Feature you can check all the settings there
Adil

Performance issue while generating Query

Hi BI Gurus.
I am facing performance issue while generating query on 0IC_C03.
It has a variable as (from & to) for generating the report for a particular time duration.
if the variable (from & to) fields is filled then after taking a long time it shows run time error.
& if the query is executed without mentioning the variable(which is optional) then the data is extracted from beginning to till date. the same takes less time in execution.
& after that the period has to be selected manually by option keep filter value. please suggest how can i solve the error
Regards
Ritika

HI RITIKA,
WEL COME TO SDN.
YOUHAVE TO CHECK THE FOLLOWING RUN TIME SEGMENTS USING ST03N TCODE:
High Database Runtime
High OLAP Runtime
High Frontend Runtime
if its high Database Runtime :
- check the aggregates or create aggregates on cube and this helps you.
if its High OLAP Runtime :
- check the user exits if any.
- check the hier. are used and fetching in deep level.
If its high frontend runtime:
- check if a very high number of cells and formattings are transferred to the Frontend ( use "All data" to get value "No. of Cells") which cause high network and frontend (processing) runtime.
For From and to date variables, create one more set and use it and try.
Regs,
VACHAN

How do I generate a list of all VIs that are in a TestStand (3.1) sequence?

Can TestStand (3.1) generate a list of all the VIs that are included in the sequence? I have a folder structure full of VIs and I know that not all are being used. I'd like to identify the unused VIs.

I hope there is no direct method to get the list of VI's, I will always try the following method
This is the fairly easy way to get the list of VI's used in the Sequence
Invoke ' Edit -> Sequence File Properties ' and in the Load Option set ' Preload When Opening Sequence File ' , after setting this property close and open the corresponding Sequence file
When the Sequence File is opened, all the VI's will be loaded in the Memory, so the below code in LabVIEW will list all the VI's in memory
There is always other complicated Method, you have use the Teststand ActiveX to read all the Steps in the Sequence FIle and Get the Step names which has the LabVIEW Adapter.
I am using TS 4.2.1, hope above mentioned options are in the TS 3.1
AshwiN,

How do I generate a list of keyboard shortcuts for any given application

I want to generate a list of keyboard shortcuts for all of the applications I have on my Mac. I want the list to be a simple text (or rtf) file that I can edit and organize. (By edit, I don't mean change the shortcuts, only the report of them.)
I was using Key Cue, but it does not let me save the list to a text file.
I want this for several purposes. One is to have a easy to reference list of shortcuts to learn. Another is to find unused key combinations that I can use for my own keyboard shortcuts that I create with DefaultKeyBinding.dict.
Note: The program doesn't have to an OS X app. A program that runs from a shell without a GUI is plenty adequate.
If there is a way to read the keyboard commands from a plist list or other such file, and any of you know the format for these or where I can find them, I can write a Perl script myself to do it.

Well, the info is stored in...
/Users/YourUserName/Library/Preferences/com.apple.universalaccess.plist
PlistPro has a way to convert it to ASCII, but you'll srtill have work to do, as...
{enabled = 1; key = 20; modifier = 1179648; sybmolichotkey = 28; },
{enabled = 1; key = 20; modifier = 1441792; sybmolichotkey = 29; },
{enabled = 1; key = 21; modifier = 1179648; sybmolichotkey = 30; },
{enabled = 1; key = 21; modifier = 1441792; sybmolichotkey = 31; },
{enabled = 0; key = 28; modifier = 1572864; sybmolichotkey = 15; },
{enabled = 0; key = 27; modifier = 1572864; sybmolichotkey = 19; },
{enabled = 0; key = 24; modifier = 1572864; sybmolichotkey = 17; },
{enabled = 0; key = 47; modifier = 1835008; sybmolichotkey = 25; },
{enabled = 0; key = 43; modifier = 1835008; sybmolichotkey = 26; },
{enabled = 0; key = 28; modifier = 1835008; sybmolichotkey = 21; },
{enabled = 0; key = 96; modifier = 1048576; sybmolichotkey = 59; },
{enabled = 1; key = 122; modifier = 262144; sybmolichotkey = 12; },
{enabled = 0; key = 120; modifier = 262144; sybmolichotkey = 7; },
{enabled = 0; key = 99; modifier = 262144; sybmolichotkey = 8; },
{enabled = 0; key = 118; modifier = 262144; sybmolichotkey = 9; },
{enabled = 0; key = 96; modifier = 262144; sybmolichotkey = 10; },
{enabled = 0; key = 97; modifier = 262144; sybmolichotkey = 11; },
{enabled = 1; key = 50; modifier = 1048576; sybmolichotkey = 27; },
{enabled = 1; key = 98; modifier = 262144; sybmolichotkey = 13; },
{enabled = 1; key = 50; modifier = 1572864; sybmolichotkey = 51; },
{enabled = 1; key = 100; modifier = 262144; sybmolichotkey = 57; },
{enabled = 1; key = 17; modifier = 1572864; sybmolichotkey = 50; },
{enabled = 1; key = 2; modifier = 1572864; sybmolichotkey = 52; },
{enabled = 0; key = 105; modifier = 0; sybmolichotkey = 32; },
{enabled = 0; key = 109; modifier = 0; sybmolichotkey = 33; },
{enabled = 0; key = 103; modifier = 0; sybmolichotkey = 36; },
{enabled = 0; key = 109; modifier = 0; sybmolichotkey = 62; },
{enabled = 0; key = 49; modifier = 1048576; sybmolichotkey = 60; },
{enabled = 0; key = 49; modifier = 1572864; sybmolichotkey = 61; },
{enabled = 1; key = 2; modifier = 1310720; sybmolichotkey = 70; },
{enabled = 1; key = 49; modifier = 1048576; sybmolichotkey = 64; },
{enabled = 1; key = 49; modifier = 1572864; sybmolichotkey = 65; },
{enabled = 0; key = 53; modifier = 1048576; sybmolichotkey = 73; },
{enabled = 1; key = 107; modifier = 0; sybmolichotkey = 53; },
{enabled = 1; key = 113; modifier = 0; sybmolichotkey = 54; }

Script needed to generate a list of paragraph and character styles from the Book Level

Hello,
I am using FrameMaker 11 in the Adobe Technical Communication Suite 4 and I need to find a script that will generate a list
of paragraph and character styles from the book level.
I am working with unstructured FrameMaker books, but will soon be looking at getting a conversion table developed
that will allow me to migrate all my data over to Dita (1.1 for now).
Any thoughts, ideas on this is very much appreciated.
Regards,
Jim

Hi Jim,
I think the problem you are having with getting a response is that you are asking someone to write a script for you. Normally, you would have to pay someone for this, as it is something that folks do for a living.
Nonetheless, I had a few minutes to spare, so I worked up the following script that I believe does the job. It is very slow, clunky, and totally non-elegant, but I think it works. It leverages the book error log mechanism which is built in and accessible by scripts, but is spendidly unattractive. I hope this gives you a starting point. It could be made much more beautiful, of course, but such would take lots more time.
Russ
ListAllFormatsInBook()
function ListAllFormatsInBook()
    var doc, path, fmt;
    var book = app.ActiveBook;
    if(!book.ObjectValid()) book = app.FirstOpenBook;
    if(!book.ObjectValid())
        alert("No book window is active. Cannot continue.");
        return;
    CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
    CallErrorLog(book, 0, 0, "** Book format report for:");
    CallErrorLog(book, 0, 0, book.Name);
    var comp = book.FirstComponentInBook;
    while(comp.ObjectValid())
        path = comp.Name;
        doc = SimpleOpen (path, false);
        if(doc.ObjectValid())
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, doc, 0, "");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "Paragraph formats:");
            fmt = doc.FirstPgfFmtInDoc;
            while(fmt.ObjectValid())
                CallErrorLog(book, 0, 0, " - " + fmt.Name);
                fmt = fmt.NextPgfFmtInDoc;
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "Character formats:");
            fmt = doc.FirstCharFmtInDoc;
            while(fmt.ObjectValid())
                CallErrorLog(book, 0, 0, " - " + fmt.Name);
                fmt = fmt.NextCharFmtInDoc;
        else
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            CallErrorLog(book, 0, 0, "!!! Could not open: " + comp.Name + " !!!");
            CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
        comp = comp.NextComponentInBook;
function CallErrorLog(book, doc, object, text)
    var arg;
    arg = "log ";
    if(book == null || book == 0 || !book.ObjectValid())
        arg += "-b=0 ";
    else arg += "-b=" + book.id + " ";
    if(doc == null || doc == 0 || !doc.ObjectValid())
        arg += "-d=0 ";
    else arg += "-d=" + doc.id + " ";
    if(object == null || object == 0 || !object.ObjectValid())
        arg += "-O=0 ";
    else arg += "-O=" + object.id + " ";
    arg += "--" + text;
    CallClient("BookErrorLog", arg);

How to generate a list

I have two columns in a spread sheet. The A column has names. The B column tracks progress on tests--simple pass or fail. I use a 1 for pass and leave the cell blank for fail. I can change the method of recording grades if that helps.
On a separate page, I want to generate a list of names of people who have failed the test. I want the list to update as grades change in the B column over time. I don't want the names of people who have passed to be on the list.
Can anyone help?
Thanks in advance.

Hi shadow,
Applying Barry's and Jerry's ingenuous approach discussed here gives this:
The formula in A2 of the 'List' table, shown in the formula bar, is filled down.
The formula in C2 of the 'Results' table is =B&COUNTIF($B$2:B2,B) , also filled down.
Changing 'F' to 'P' in A1 of the 'List' table will list those who passed.
SG

Build.vi does not output Generated files list for installer

In LV 2011, Build.vi does not output a "Generated files" list when used on an installer. Example attached. When run on my system, "Generated files" is an empty array and "error out" shows no errors or warnings. The built installer can be found on disk, so I know the build succeeded.
I critically need to know the target folder for my built installer so I can use it in an automated build tool. Assuming this is a real bug, can someone help me with a workaround that doesn't require an operator to point the VI to the target path?
Attachments:
build_vi_bug.zip ‏10 KB

Hi David,
You may find the solution in the following two links
Creating Builds Programmatically
Build executable and installer programmatically
In the second link, there is an example code posted by Suse to find the destination path programmatically, hope it helps answer your question.
Yupeng J.

Execute generated query report in RSRT

Hello experts,
I tried to execute the generated report for a query in transaction RSRT and it failed ("query not found on server" was the error). Now my question is more general - what is this report for? Is it just a "background program" for a query and should not/cannot be executed in SE38? Can you execute your generated query programs in SE38?
Thanks in advance!
Greetings,
Daniel

Hi Daniel,
Basically the queries are Subroutine Pools and you can call this in ABAP.
Please see the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/41c97a30-0901-0010-61a5-d7abc01410ee
Re: Execute generated query report in RSRT
I hope this will help you to get more clarity as well to me to get more points!!!!
Regs
Gopi.

Generating a List of References in FM12 to include External Cross-References and Imported Graphics, but no Imported Graphic references show in the LOR. Is this a bug in FM12 or what am I doing wrong?

and has always generated the list of references just fine. Now in FM12, the LOR no longer will give any references for the Imported Graphics. I have even tried creating a new chapter from the FM12 templates, adding the chapter to the front of the book, and allowing FM12 to use that file as the template for the LOR. Still no success - it will not give any references to the Imported Graphics in my chapter files. Is this a bug in FM12? Is there something different about FM12 that would cause this not to work with existing FM11 files??? Please help, I need this resolved and working.
Thank you,
Beverly

Arnis and Jeff,
Thank you both very much for your assistance. I was able to figure out why the Adobe Application Manager kept failing on installing the patches. Idiot me didn't unzip them first. Once I unzipped the patch files, the installer worked fine. Both patches are now successfully installed; my FM version is now 12.0.2..
To answer some of your questions:
Yes, I have administrator privileges on my PC.
Yes, I had all of the files in the book opened when I generated and/or updated the LOR file. So that was not the issue.
With the patches installed, I opened a book and all of its files. I updated the LOR and all works fine – it gives me all of the Imported Graphic references. So there must have been an issue with that release of FM12 (12.0.0.329), which was fixed with the patches.
Again, thank you both for your help!
Best regards,
Beverly

Generate error list with object detail

Dear All,
I have two way (multimaster ) Replication but due to some reason it generated many errors during replicate data so to resolve errors, I want to generate error list (Report) with object details instead viewing them one by one. please guide
Thanks

What do you mean with generate error list (Report) with object details ?
You can get all the errors from DEFERROR view.
There are columns DEFERRED_TRAN_ID and CALLNO.
You can join this columns with DEFCALL (DEFERRED_TRAN_ID and CALLNO).
Joining this two views will provide information about the objects and transaction type involved in the call.
DEFCALL.PACKAGENAME contains the reference to the table_name.
DEFCALL.PROCNAME contains information about the transaction type.
Example:
select e.deferred_tran_id,
       e.callno,
       e.origin_tran_db,
       c.packagename,
       c.procname
from deferror e, defcall c
where e.deferred_tran_id=c.deferred_tran_id
and e.callno=c.callno(below are the links to the 10gR2 docs containing information about DEFERROR and DEFCALL views. If your database is different version, than search http://tahiti.oracle.com for version specific documentation)
DEFERROR
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rardeftranviews.htm#sthref2599
DEFCALL
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rardeftranviews.htm#sthref2595
Cheers!
Message was edited by:
tekicora

Can we override the viewlink generated query?

Hi,
my question is :
After creating the viewlink it generates query with bindvarible, can we override this, so that we can pass a some other value ?

Hi,
But right now i am using the jdev11.1.1.4?
can we oveeride it in viewlink generated query in the wizard? is their is any issues if we ovveride in wizard itself.
Actaully i overrided the viewlink genreated query in wizard lik :
EmpDeptFkLink viewLink
before:
:Bind_DepartmentId= Employees.DEPARTMENT_ID
After override :
DECODE(:Bind_DepartmentId,10,Employees.DEPARTMENT_ID,:Bind_DepartmentId) = Employees.DEPARTMENT_ID
it works. is their any performance issues related to this?

Generate query at a time & connect two database ?

Hi
Could u help me? it is necessary that
I have two database ( RSHPL,RSPL) and both data base have same table name and same fieldname (Table Name :-OITM, Fieldname :ONHAND ,pk- ITEMcode,)
At first I tell u what I want?
I want to generate query at a time & connect two database and same table name(OITM) to select the TOTAL VALUE of this field(ONHAND) and pk-key is Itemcode.
Is it Possible? If Possible plz write this query and send me.

Hi,
I don't think its possible to write a query from within SAP that allows you to get data from another SAP database.
I have used SQL Reporting Services to report on data from multiple databases, and this works very well for many of my clients. It depends on what you want to do with the data, do you need to display it on the screen in SAP and it to a field or will a report suffice?
Regards,
Adrian

Generate query list by Infoproviders

Similar Messages

Maybe you are looking for