Generating sound signal and record the timing using labview

Hi,
can somebody help me in generating audio o/p from daq 6036 and record the same signal for reference.

Kanth,
I think you will find there are lots of topics already on the forums talking about trying to do this.
Here are a couple of examples:
Forum: Continuous audio output with varying volume or frequency
Forum: How do I get audio output from a labview program
Probably the easiest way is to search the forums for what you are looking for:
Search Results on forums.ni.com for 'audio' and 'output'
Finally, here is an example program that may also help you:
NI-DAQmx: Acquiring Audio and Transferring It to a PC Sound Card
Otis
Training and Certification
Product Support Engineer
National Instruments

Similar Messages

  • Generate a series of waveforms and record the data in a file

    System:
    Win7
    Labview 8.5 or 10 (can choose)
    PXI-1033 rack with:
    PXI-5421 AWG
    PXI-4071 DMM
    PXI-6542 Digital IO
    PXI-4110 DCPower
    PXI-5124 Digitizer
    I am working on a summer project to create a functional test system for four different types of PCBs. I will use a test rig as an interface to these PCBs, where each type will be identified by its position. Please see attached UML as to how I want the program to run.
    I want a user settings box pop up when the application is started, where the operator must enter his name and choose which type of board. Further, after entering these details, I want the application to start testing according to which type of board is in the system and which type the operator indicates (the user prompt for card details is just a precaution).
    I am trying to figure out what sort of architecture I should use for the LV part of it. So far I've managed to run the AWG and digitizer as two seperate VIs, but I've read a little bit about using the Producer/Consumer architecture, and want to know if this is a good idea? And which parts should be where? The AWG will input data to the PCB, which will be recorded by the digitizer and then testet using a mathscript and recorded to file.
    So I figure I have to use some sort of event and sequence structure. For example, I want to output two sinusoidal signals with different frequencies after each other and check the voltage amplitude of the scoped output signal and record this.
    If someone could point me in a direction of how to start, I would be very happy. After looking through some of the topics here, I have seen that it is often suggested to use the producer/consumer architecture, so before I do a lot of work which I might have to re-do I want to ask for help will post my solutions as I go.
    Attachments:
    uml.png ‏63 KB

    The LabVIEW large applications community should be able to give you all the info you need.  Check it out here.  Let us know if you need more info.
    This account is no longer active. Contact ShadesOfGray for current posts and information.

  • When you download iTunes material, does iTunes record the IP used where it is being downloaded to?  I am trying to track a lost/missing IPOD Touch and want to know if they have that data.

    When you download iTunes material, does iTunes record the IP used where it is being downloaded to?  I am trying to track a lost/missing IPOD Touch and want to know if they have that data.   It was left on a small street and someone has found it and has been hacking into my account by resetting my password.  They took about 41+ dollars from my account.   I am hoping the IP it was connecting with to download to it was tracked and that I can get that information to figure out where it is located.

    No. From the second link below.
    "Apple does not have a process to track or flag lost or stolen product
    - If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
    - Report to police and change the passwords for all accounts used on the iPod.
    - Apple will not help
    Reporting a lost or stolen Apple product

  • Select an area of sound track and delete it without using the razor?

    Is there a way to select an area of sound track and delete it without using the razor please?
    Like drag and then cmd-delete or clear or something would seem intuitive?
    Thanks Steve z denver

    Set In and Out Points to define the region, then use the Lift command (Sequence>Lift). Note that the Lift command functions based on track targetting, so if the Video track is also targetted, the content will be removed there, too.

  • Video Pixelation occurs while recording the video using flash player

    Hello,
    I am recording the video using flash player 9 ( using the
    flash media server 2.0 on the back end). Everything used to work
    fine in the past. The quality of the flv video was good. Now
    suddently, I have started seeing the pixelation in the recorded
    video (very poor video quality). Nothing has been changed in the
    code. However on the server side, I am not very sure if there is
    any windows update has taken place and have caused the problem with
    the codec on server.
    However my understanding is that when we record the video
    then flash player use its own codec not the flash media server.
    Can any one help me on how I can get rid of pixelation
    issues?
    Thanks for your help.
    Best Regards
    Pradeep

    Hello Melissa,
    I might not be understanding the question right, but if you
    are using Flash
    Player 6, and the Flash Player 6 video player component, you
    can resize the
    video by resizing the component on the stage (just drag and
    make it larger).
    Let me know if that works for you.
    Jesse H.
    Adobe Community Expert
    My site:
    http://www.jharding.com
    Free Blog Radio:
    http://www.tornadostream.com
    > I'm streaming video using Flash Player 6. The problem I
    am having is
    > that the
    > video will only play at a super small size, something
    like 180 x 60
    > (that's a
    > guess). Is there a way to play the video at the 320
    width that I
    > redered it as?
    > I'm using Flash Player 6 because some code that came
    with my
    > purchased Flash
    > Template does not work unless it's published to Flash
    Plaey 6.
    > Thanks in advance!

  • Can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

    can firefox support "file:///" format to access local files (note 3 fw slashes) this works for IE but not firefox and is the format used in the "afghan war diary" from wikileaks

    See http://kb.mozillazine.org/Links_to_local_pages_do_not_work

  • Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

    Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?

    Presuming you get the chime, most of your Mac hardware is working and has passed the first part of the power-on self-test.
    If the screen comes on, basic graphics is working.
    The dark gray Apple is not present inside the Mac -- it must be loaded from a boot device. If the dark gray Apple appears, at least one of your boot devices has some capabilities. The flower petal/gear moves while Darwin is initializing and loading. If it stops immediately, something is terribly wrong.
    When the screen turns blue, Mac OS X has loaded and your graphics card transitions to Interrupt-driven operation. LoginWindow task draws the login screen, and Mac OS X is ready for login.
    What could be the problem depends on where in the process it stops, and whether the power light is blinking.

  • Is there a way I can take a cassette played and into my iPhone and plug it and record the contents of the casstte onto my device?

    Is there a way I can take a cassette played and into my iPhone and plug it and record the contents of the casstte onto my device?

    no

  • Can I repeat and record the same music tracks in Itunes

    How can I repeat and record the same music tracks in Itunes

    I would advise against this.
    You can redownload some itunes purchases from itunes, but there is no guarantee that it will be there in the future.

  • Code for reading the and placing the file using java webservice

    Hi All,
    Can anybody can guide me on how to read a file and place the file using java.
    Let  me know if any code is available which has been completed using java.
    Regards,
    Rahul

    Hi,
    The "square" symbol that you are referring to is probably a CRLF (Carriage Return - Life Feed) Control Character.
    This is more commonly known as a "Enter" at the end of a line / sentence.
    To clean this character from strings in Java, please use:
    String patternStr = "(?m)$^|[\\r\\n]+\\z";
    String replaceStr = " ";
    Pattern pattern = Pattern.compile(patternStr);
    Matcher matcher = pattern.matcher(inputStr);
    return matcher.replaceAll(replaceStr);
    Hope that helps.
    Thanks.
    p256960.

  • HT4623 I am using iphone GS3 and jailbreak the iOS using 5.0.1 can I download and install iOS5.1.1

    I am using iphone GS3 and jailbreak the iOS using 5.0.1 can I download and install iOS5.1.1

    Per Terms of Use to which you agreed when you joined this
    forum, discussion of jailbroken iPhones is prohibited. You will
    get no help here.
    Be advised the jailbreak made unknown alterations to the iPhone
    which will prevent future upgrades, open up the OS to malware,
    and may result in it becoming useless - a brick, if you will.

  • I started to do a backup from my iphone 5s following a notice the device gave. but it was unsuccessful and in the first use I saw my iphone battery drains drastically. what should i do now?

    I started to do a backup on my iphone 5s following a notice the device gave. but it was unsuccessful and in the first use of my iphone I saw my iphone battery drains drastically. I had upgraded the software to ios 7.1. what should i do now? is this a problem with the battery?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Cannot sync and backup the iPhone using iTunes

    I developed the program and uploaded it on the iPhone. The problem is that with the my application installed, I cannot sync and backup the phone using iTunes. As soon as the app is removed, I was able to perform the expected sequence of backing up and syncing the phone. This issue affects both Windows and Mac users of the iPhone app. This happened on iOS 4.0 with both an iPhone 4 and 3GS. How can I solve this problem?

    Follow the directions here:
    http://support.apple.com/kb/TS1627

  • My iMac won't start up properly, it powers on the bong sound happens and then the little gear spins forever

    My iMac won't start up properly, it powers on the bong sound happens and then the little gear spins forever
    ive tried booting from my leapord disk
    smc reset
    pram reset
    and safe boot

    Please carefully read Apple's advice letter Gray screen appears during startup for troubleshooting steps.

  • How to create and read text file using LabVIEW 7.1 PDA module?

    How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
    I attach my code here.
    Attachments:
    File_IO.vi ‏82 KB

    Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Maybe you are looking for