Generation of report in landscape mode using PDF template

Hi,
I am creating a report using pdf template, I have used the repeating group i.e I have used the code <?rep_field="BODY_START"?> and <?rep_field="BODY_END"?> as the repeating area and with the field which needs to be repeated i have used the code <?rep_field="T1_G1"?> in order to display data in the loop.
But finally when the report is displayed, the report acts strange ...sometimes it fails to open says that an internal file read error occured , whereas if I remove the <?rep_field="T1_G1"?> code it works fine , other times if at all it displays the report, the values in the repeating field operlap each other and they are vertically oriented wheras for landscape mode it should be vertical, I tried setting the properties and locking the fileds but all in vain.
Kindly help ASAP!!
Thankz
-Gaurav

I have had the same problem for a year. I never got my TAR answered so I tried again. I am waiting...again. Portrait works fine for me. I am using it to generate po's with custom headers. The only part that does not work for me is the total appears on every page, not just the last one. If I get an answer, I will let you know...

Similar Messages

How to print a report in landscape mode?

Hello everybody,
I have a task where in i need to print a report in LANSCAPE format.
I have tried to print the report output but i could not found an option to set LANDSCAPE mode and also how to change the font size.
Can anybody suggest me the approach?
Helpful answers will surely be rewarded.
Thanks in advance.
Sanghamitra.

Hi
If you are using the command MEW-PAGE PRINT ON
then we can give this layout options
like
NEW-PAGE PRINT ON
DESTINATION <printer name>
immediately 'X'
KEEP IN SPOOL 'X'
LAYOUT 'X_65_132' (OR X_65_255)
RECEIVER SY-UNAME
NO-DISPLAY.
OTHERWISE WHEN YOU SELECT THE PRINTER
IN THE PRINTER PROPERTIES/SETTINGS BASICS-> PAPER
you will have this facility to select LANGSCAPE/PORTRAIT
use that and print
Reward points for useful Answers
Regards
Anji

How to print report in Character mode using Oracle Developer 10g

Dear,
I migrate my forms and reports from Oracle Developer 6 to Oracle Developer reports 10g,
We are using some character mode report for bill printing. But when i run these report through menu on Web i got error message like
"REP-1920: Character mode runtime incompatible with DESFORMAT of PDF, HTML, HTMLCSS, SPREADSHEET or RTF"
i don't want to change the character mode to any other mode because it effects the printing.
so how can it possible to set the mode to character and view report on Web.
pls. suggest me solution.

You have to pass the PRT file name as value for the DESFORMAT and use mode= MODE=CHARACTER.
E.g.
http://<host name>:<port>/reports/rwservlet?desformat=dflt&mode=character&.....

How to print Report in Landscape mode

Hi,
I set the Header,Body,Footer section to Landscape Orientation. still its printing report in Portrait mode.
Your suggestions are welcome
Vikas
null

Thanks, but its not working on web, i tried it on client server it works fine.
anyway Thanks for your time, on your end is it working on WEB,
Thanks
Vikas
null

Adobe Acrobat as a server to create PDF using PDF templates and field values

I'm writing a web page to create a PDF using fields that we ask for them in the screen.
My idea is:
1. Ask for field values (text values and a photo) in my web
2. Run Adobe Acrobat to load a PDF template (PDF form) and mix with the field values
3. Create a final PDF mixing values and template
4. Show to document to the user in his client web browser. I guess the only way to do that is to create the PDF on a server with Adobe Acrobat Pro and send to the user browser a JPEG that will represent the PDF: If I do this operation in the PDF visor at the client browser, the problem is that it will will be mandatory to install Adobe Acrobat in each cliente because only this visor can manage javascript.
Can you tell me if this idea is correct? It is possible to use Adobe Acrobat on a Server to create PDF when some proccess needs?

and what other Adobe product o procedure can we use to do that?
I only need to create a PDF mixing PDF Templete, field values and javascript.
Thanks for your help.

Using pdf templates

My book publisher provides pdf templates to use to create book covers. These pdf templates have exact sizes that need to be followed exactly. I realize that Adobe Acrobat XI is not an editing program so my question is how do I fill out the fields in Word so that parts fit the template exactly without extruding beyond the set fields? If I export to Word, will the field sizes be exact?
(No sure how I can attach an example)

I put the file up at http://www.orthohelp.com/example/testtemplate.pdf
Adobe Acrobat says that it can find no forms on it. Maybe I am doing something wrong.
There's a message attached to this post that says "currently being moderated". Why?

How to print report in Charactor mode using Oracle Developer 10g

Dear,
I have converted my few reports from Oracle Developer forms 5 to Oracle Developer forms 10g,
i am running these reports on Web, for that i have configour "rwserver" server.
But when i run these report through menu on Web i got error message like
"REP-1920: Character mode runtime incompatible with DESFORMAT of PDF, HTML, HTMLCSS, SPREADSHEET or RTF"
i don't want to change the character mode to any other mode because it effects the printing.
so how can it possible to set the mode to character and view report on Web.
pls. suggest me solution.
Thanks

You have to pass the PRT file name as value for the DESFORMAT and use mode= MODE=CHARACTER.
E.g.
http://<host name>:<port>/reports/rwservlet?desformat=dflt&mode=character&.....

How Can I print my report through character mode using DOS, very very urgent

Hi all
I would like to print my reports instead of from windows based, I want to print through DOS mode. While giving dos mode printouts report builder is hanging and comming out. Any help will be appreciated.
Thanks
Reddy

Hi Reddy,
Here is the solution.
At Dos\> ORACLE_HOME\BIN\RWRUN60 <followed by the report name and desired arguments >
srini

Output shown blank when we run report in xml publisher using excel template

Hi,
1) We have a requirement where we need to run report to shown 100 columns. Since Microsoft word supports only 63 columns. So we are building the report template in Excel.
2) When I run the report in Excel locally I get the output. But when I uplaod in BIP server and then run the report It gives a blank output.
BI Publisher version 10.1.3.4.1
BI Publisher Desktop version 11.1.1.5
Please look into the issue.
Please help
Thanks,
Nita

Pl post details of OS, database and EBS versions, along with the database characterset.
Are you creating PDF output ? Can you print Chinese characters when using US/UK operating units ? Are you using Pasta ?
How to Generate PDF Output With UTF8 in R12? [ID 778970.1]
HTH
Srini

CRVS2010 Beta 2 - report does not print in Landscape mode correctly

I am using Crystal Reports Beta 2 for Visual Studio 2010 on Windows XP. I am trying to print a report in landscape mode. The WPF Crystal Report Viewer displays the report correctly in landscape view. When I print it, it moves all the data to the center of the page, prints it in smaller font and to the left and cuts off a lot of the data on the right hand side.
I have tried various different suggested solutions from reading other forums and nothing seems to work. Is this a known Crystal Report Viewer issue?
Solutions I have already tried:
1. Page setup under Crystal Reports - selected no printer (optimize for screen display)
2. Page setup under Crystal Reports - checked dissociate formatting page size and printer paper size
3. Setting paper orientation and page orientation at run-time to landscape.
4. Printing to different printers
Something to note, I can export this report as a .pdf file and it prints perfectly from adobe. This only seems to be an issue when printing directly from the WPF Crystal Report Viewer to the printer.
Any help would be greatly appreciated! I have been stuck on this issue for a while...
Thanks!

Hi Sharon,
There have been issues with printing and printers in CR 2008 and the same routines are in CR 2010. The patches we have done to help with standard paper sizes in CR 2008 are not in the Beta releases.
Not sure if they will make it into the GA release next month. As a work around I suggest you continue exporting to PDF and then printing the PDF file until they have been resolved and patches are available.
Thank you
Don

Print SSRS Server Report in landscape or portrait mode directly(without report viewer control)

Hello,
.Net 4.0\VS2010\C#\ssrs 2008 on Sql Server 2008R2
Having a problem printing a Server report while controlling the orientation and the size of the emf rendered to the physical page.
I have the report cutting off in both landscape and portrait modes. I'm passing the following deviceinfo to the render function:
string DeviceInfo =
@"<DeviceInfo>
<OutputFormat>EMF</OutputFormat>
<PageWidth>8.5in</PageWidth>
<PageHeight>11in</PageHeight>
<MarginTop>0.25in</MarginTop>
<MarginLeft>0.25in</MarginLeft>
<MarginRight>0.25in</MarginRight>
<MarginBottom>0.25in</MarginBottom>
</DeviceInfo>";
return DeviceInfo;
string mimeType; string fileExtension; Stream pageStream = serverReport.Render("IMAGE", deviceInfo, firstPageParameters, out mimeType, out fileExtension);
No other settings seem to have an affect on controlling the output to printer or pdf. i.e. The deviceinfo params fed to server report's render function are all you get. I think my original code comes from an MSDN or CodeProject example. I'm not
inventing anything new here.
Links below indicate similar problems but they are looking at the issue from just landscape mode. Seems like I ought to be able to squash or expand the image to whatever size I specify, separate from the 'page' size. Please let me know what i need
to know to make these reports print without bleeding onto 2 pages or slicing off the right side of the document image.
http://stackoverflow.com/questions/25652415/cant-print-ssrs-rdlc-report-in-landscape-mode-directly-to-printer-using-suggest
https://social.technet.microsoft.com/Forums/sqlserver/en-US/06a9b432-c8a5-4952-a07c-867742a26c47/print-rdlc-without-report-viewer-either-in-portrait-or-landscape?forum=sqlreportingservices
print ssrs rdlc report in landscape mode directly
Thanks!

Hi
FraterJoanni,
Thanks for posting in MSDN forum.
I am not expert in SSRS. You should get better response in SQL Server > SQL
Server Reporting Services, Power View forum.
After take a look at the similar threads links as you posted above.
The conclusion is we needn’t tell the program o this report is landscape not portrait. If the width is larger than the height, the report will be printed in landscape; otherwise, it will be printed in portrait.
>>Links below indicate similar problems but they are looking at the issue from just landscape mode.
But in C# forum, we only from the point of code, code looks OK to me.
A similar blog talking about this
Controlling Page Size in a Reporting Services Report
And I have got the default page size in the US is Letter, 8.5in x 11in. In other parts of the world A4 (8.3in x 11.7in) is the standard.
65: //build the device settings (A4 8.3 × 11.7)
66: string deviceInfo = string.Format("<DeviceInfo><PageHeight>{0}</PageHeight><PageWidth>{1}</PageWidth></DeviceInfo>", "11.7in", "8.3in");
67:
68: //get report bytes
69: result = rs.Render(format, deviceInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
70:
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can someone make iBooks have the Option to view 2 pages in landscape mode so it can use up all the pixel real estate?

Can someone make iBooks have the Option to view 2 pages in landscape mode so it can use up all the pixel real estate?
Apple usually does this for OSX and its great when compared to windows where it doesnt use up all the real estate for viewing applications like websites and pdf files but when it comes to iBooks, it feels like there is no apple touch to it and is limited.
If steve jobs were still alive, i bet there wouldnt be this problem >.>
Please consider this as a real problem for people out there who would like to see 2 pages in landscape mode with pdf files and not just epub files.
Thanks!

Penguin, do you always insult people on here or was I just a special case?
If you read the statement carefully, which you obviously did not! I was speculating, and I did not say anything for certain about knowing or not knowing ...
I'm happy for the reply to the post and helpful link you posted to where I can leave some feedback for my post on an Apple monitored site but i rather you not reply if your gonna leave a snyde remark with every helpful comment.
Don't do it again. and Thanks for the help.

Printing out report using pdf

I am using report 6i.. i have set the layout parameter to landscape for all three sections, header,main,trailer
when I put the report on the web,using pdf, i have to use page setup to have the report print our in a landscape..
I thought that the report would pass along the parameter of landscape to Acrobat??
Any suggestions would be grealty appreciated.
Thanks
Ellery

This issue is known and a bug has been logged. Please contact Oracle support for information on this.
Thanks,
Siva

How to create editable PDF template for XML Publisher reports

Hi,
I have got a requirement to have some editable fields in one report whose output is in PDF format.
I tried looking and saw this can be done using the XML Publisher report and using PDF template.
But I got only Adobe Acrobat Reader and it does not have the facility to create Form fields.. Can you let me know what software I need in order to create the editable PDF Template.
In the user guide, it didnot mention anything regarding this.
Can I create editable PDF report using RTF template or do i have to got for PDF template only?
Any help is appreciated!
Thanks

Hi,
To edit PDF template , u need Acrobat writer, which is not free .
I am still wondering what is this ?
"" Can I create editable PDF report using RTF template ?? "".
What is editable PDF report. ?
i think what you tried to mention is ,
can the PDF output from xml publisher is editable ?
If that is the question , so here is some points,
If you have Acrobat Writer or prof.edition, you can edit all the PDF documents irrespective of being from where it is generated.
To make you understand more of XMLP.
You create RTF template in word, so that , after merging with xml you can have multiple output formats like PDF, XLS, EFT,.....

Declaring namespace and Parameter in PDF template

Hi,
I am using PDF template for generating reports. is there any limitation on declaring these objects in PDF template? when I try doing that the report gives form proccesor error.
Thank in advance

Hi,
If you are working in XML Publisher reports.
Before calling the report, you have to set the propery class of parameter.
<parameters>
<parameter name="p_cpu_make" type="character" defaultValue="AMD"/>
</parameters>
Properties prop = new Properties();
prop.put("xslt.p_cpu_make", "INTEL");
Thanks.

Generation of report in landscape mode using PDF template

Similar Messages

Maybe you are looking for