Generation of xml with the XSD

Hi,
I want to generate an XML file by reading the CSV and XSD files.
Please help me in this regard.
Thanx
kris

You could use Stylus Studio for the same

Similar Messages

[svn:bz-trunk] 8823: Updated the sample messaging-config. xml with the new disallow-wildcard-subtopics configuration element.

Revision: 8823
Author:   [email protected]
Date:     2009-07-27 09:12:08 -0700 (Mon, 27 Jul 2009)
Log Message:
Updated the sample messaging-config.xml with the new disallow-wildcard-subtopics configuration element.
Modified Paths:
    blazeds/trunk/resources/config/messaging-config.xml

Hi,
could you let us know what version of OEPE you were running prior to the upgrade along with the Eclipse version ? Also was the previous installation a full OEPE install or was it installed via the update site ?
thanks
Raj

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

Uniqueness for xml element is not validated with the xsd:unique

Hi
I am using <xsd:unique> to specify uniqueness for certain elements in the schema. But when i create the xml for the schema,it allows me to create elements with duplicate values for which the uniqueness is defined and also it is allowed to parse the xml correctly.I am using jaxb2.0 and jaxp2.0 to bind the xml and parse it. The schema is described below :
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <xsd:include schemaLocation="ArtifactDetails.xsd" />
     <xsd:element name="EKMArtifacts">
          <xsd:complexType>
               <xsd:sequence>
                    <xsd:element name="Artifact" minOccurs="0" maxOccurs="unbounded">
                         <xsd:complexType>
                              <xsd:sequence>
                                   <xsd:element name="ArtifactType" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="ArtifactName" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Status" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="VersionString" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Artifactdesc" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Functionaldesc" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Department" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Location" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Rated" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Category" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Createdby" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="OSPlatform" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="APPPlatform" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Country" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="State" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element name="Vendor" type="xsd:string" nillable="false" minOccurs="1" maxOccurs="1" />
                                   <xsd:element ref="ArtifactDetails" minOccurs="0" maxOccurs="1" />
                              </xsd:sequence>
                         </xsd:complexType>
                    </xsd:element>
               </xsd:sequence>
          </xsd:complexType>
          <xsd:unique name="ArtifactNameUnique">
               <xsd:selector xpath="Artifact" />
               <xsd:field xpath="ArtifactName" />
          </xsd:unique>
     </xsd:element>
</xsd:schema>
Can anyone help me out
Thanks in advance

Well there's nothing wrong with your schema (I copyied it into XMLSpy and wasn't able to create two artifacts with the same name). My guess is that JAXB still does not support xsd:unqiue
http://www.onjava.com/pub/a/onjava/2004/12/15/jaxb.html

Adapter Module: Validate an XML with an XSD

Hello all,
I'm developing a PI adapter module (Exchange Infrastructure 3.0) for the Mail Adapter. In this module I need to get each XML attachment and then validate with an XSD schema, for this I'm using the SAX parser.
I successfully retrieved all XML attachments but when I'm trying to use the method setProperty of the SAXParser instance I'm getting an exception, bellow the code snippet.
     private static final String SCHEMA_LANGUAGE = "http://java.sun.com/xml/jaxp/properties/schemaLanguage";
     private static final String SCHEMA_SOURCE   = "http://java.sun.com/xml/jaxp/properties/schemaSource";
     private static final String XML_SCHEMA      = "http://www.w3.org/2001/XMLSchema";
     public boolean isValid(byte[] src, AuditMessageKey amk1){
          SAXParserFactory spf = SAXParserFactory.newInstance();
          SAXParser sp = null;
          spf.setNamespaceAware(true);
          spf.setValidating(true);
          String[] schemas = new String[MAX_SCHEMAS];
          schemas[0] = getClass().getResource(SCHEMA1).getFile();
          schemas[1] = getClass().getResource(SCHEMA2).getFile();
          schemas[2] = getClass().getResource(SCHEMA3).getFile();
          try {
               sp = spf.newSAXParser();
          catch (Exception e){
               Audit.addAuditLogEntry(amk1, AuditLogStatus.ERROR, "MultipleAttachments: Error creating parser.");
               return false;
// HERE IS THE STEP THROWING THE EXCEPTION
          try {
               sp.setProperty(SCHEMA_LANGUAGE, XML_SCHEMA);
          catch (Exception e){
               Audit.addAuditLogEntry(amk1, AuditLogStatus.ERROR, "MultipleAttachments: Error setting schema.");
               return false;
Did Anyone have faced this issue? How can I solve this?
Best regards,
David

Hi David,
we developed a xsd validation with java mapping.
SAP has it's own parser. At the time we developed there was a bad bug in this parser. The parser throwed a fatal error although the xml was valid!
SAP corrected the error. But this is over 1,5 years ago. I recommend a OSS .
Regards Mario

In Delayed Pulse Generation vi,Problem With THE PULSE WIDTH??

In Delayed Pulse Generation vi, I want to input a very low number for the Pulse Width while using an external timebase source. But the minimum pulse width has to be 2. Does anyone know how can I solve this problem??

Hey 45,
Unfortunately, there is no way to generate a pulse width smaller than 2x your external timebase.
There is an option to create a pulse of arbitrary width of your external source if you can afford some software processing in between. What you can do is use 1 counter to measure how many source edges of your card's internal timebase (80 MHz for TIO only, 20MHz or 100kHz for TIO and STC) your external signal is. This uses pulse width measurement as the counter application. Once you know how many source edges it takes to represent your pulse, then you can use triggered pulse generation and use the internal timebase with the pulse specs set to create the exact pulse width you want (and delay) and you can use your external pulse as the trigger. Th
is works well if your pulse is always the same width and you can measure it before hand. As an example, let's say your pulse is 20 internal timebase pulses when measured. This means you can use the pulse specs to specify a pulse width of 0.75 your pulse width by using only 15 internal timebase edges for your pulse width.
I don't know if I was clear above or not but if you give me your exact application you are looking to achieve, I might be able to help you out. Hope that helps.
Ron

How to validate an XML with its XSD in jdk1.4.2_09?

Hi all,
Kindly Tell me how to validate an Xml against an XSD in JDK1.4.2_09....
I was able to do it in jdk1.5 using the Validation class available in java.xml.validation package...
But the Task for me is to do in jdk1.4.2 since my application server runs on jdk1.4.2... changin to jdk1.5 will result in failure of main application...
sample code will be useful...
thanks in advance.
Regards,
Sundararamaprasad.

HI,
Thanks for the suggestion.... The Thing is when i compiled and executre my code it really got execute well when i ran it in the Command Prompt after settiongup appropriate classpath and path... but when i executed the same thing in the server it did not get executed though the application server also run on top of the same JDk.....I've check it out..anyhow the link gave me a very good learning...Thanks for the valuable suggestion..... :)
Regards,
Sundararamaprasad.

I have a generation 1 Appletv with the hard drive. I have just bought a new mac, but cant seem, to sync photos back to appletv hard drive anymore, i know the Imac is syncing with it because i purchased a movie from Apple TV and it loaded it reg on iMac

Can anyone help me with a generation1 appletv compatability with new Imac question?

Hi louchad,
The article below should help you sync the photos from your iMac to your Apple TV:
Apple TV (1st generation): Syncing photos via iTunes
The article explains this in more detail with screen shots, but the key points are summarized below for you:
To sync photos from a Mac or Windows PC to Apple TV (1st generation) using photo applications
Make sure you have iTunes 9.0.2 or later.
In iTunes, select the Apple TV icon in the Devices list.
Click the Photos tab.
Select "Sync photos from: ..."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
If you want to sync all your photos, select "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, faces, or collections, choose "Selected albums, events, and faces…" and select the albums or collections you want.
To sync photos from a folder on your hard disk to Apple TV (1st generation)
Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on Apple TV (1st generation), create folders inside the main image folder, and drag images into the new folders.
In iTunes, select the Apple TV icon in the Devices list.
Choose "Sync photos from: ..."
Select "Choose Folder" from the pop-up menu and select your image folder.
I hope this information helps ...
- Judy

Using perl with the HTTP POST method to exchange XML with the Auth service

Has anyone written a perl script to do this yet?
I've been trying all day and keep getting "Content is not allowed in prolog.
I've used the example xml from the docs
<?xml version="1.0" encoding="UTF-8"?>
<AuthContext version="1.0">
<Request authIdentifier="0">
<NewAuthContext orgName="dc=exampleorg,dc=com">
</NewAuthContext>
</Request>
</AuthContext>
Then I read the python post at http://swforum.sun.com/jive/thread.jspa?forumID=79&threadID=22370
and the error changed to Premature end of file.
this is the portion of perl that is getting the error:
use strict;
use LWP::UserAgent;
use HTTP::Request::Common;
my $browser = LWP::UserAgent->new(agent => 'xml client');
my $greeting = <<GREETING;
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<RequestSet vers="1.0" svcid="auth" reqid="1">
     <Request>
     <![CDATA[<?xml version="1.0" encoding="UTF-8"?>
     <AuthContext version="1.0">
          <Request authIdentifier="0">
               <NewAuthContext orgName="dc=belo,dc=com">
               </NewAuthContext>
          </Request>
     </AuthContext>]]></Request>
</RequestSet>
GREETING
my $response = $browser->request(POST 'http://idpoc1.test.belo.com/amserver/authservice',
                    Content_Type => 'text/xml',
                    Content     => [xmlRequest => $greeting]
print $response->error_as_HTML unless $response->is_success;

Your problem seems to lie in the build of the request. Here you use the "sample=$data" which will invalidate the XML itself. I've tested your code changing only the build of the Request and this works fine! Given an XML like this :
<?xml version="1.0" encoding="ISO-8859-1"?>
<data>
     <txnInfo sourcePartnerCode="6" txnDate="2005.09.08"/>
     <unitOfWorkInfo sourceTicketID="SourceTicket_1" diaryEntry="Diray_1" Status="Status_OK"/>
</data>
The Server Stub should look like this :
#!/usr/bin/perl
use XML::Simple;
use Data::Dumper;
print qq{Content-type: text/xml\n\n};
if($ENV{'REQUEST_METHOD'} eq "GET"){
     $my_data = $ENV{'QUERY_STRING'};
     print "jfghdsfjghsdg$my_data";
} else {
     $data_length = $ENV{'CONTENT_LENGTH'};
     $bytes_read = read(STDIN, $my_data, $data_length);
     print "$bytes_read, $my_data";
     $xml = new XML::Simple (KeyAttr=>[]);
     print "have passed XML::Simple creation\n";
     $data = $xml->XMLin("$my_data");
     print "i want to be here \n";
     $transcode=$data->{txnInfo}->{sourcePartnerCode};
     #print "$data->{txnInfo}->{sourcePartnerCode}";
     print $transcode;
     CASE: {
          ($transcode==6) && do {
               print "i am here";
               $lstmoddat=$data->{txnInfo}->{txnDate};
               $srctktid=$data->{unitOfWorkInfo}->{sourceTicketID};
               $actvtylogdesc=$data->{unitOfWorkInfo}->{diaryEntry};
               $status=$data->{unitOfWorkInfo}->{Status};
               $command='bop_cmd -f update1.frg "upd_stats("""Administrator""","""'.$srctktid.'""","""FIP""","""what is this???""")"';
               print "$lstmoddat $srctktid $status \n";
               print "$command";
               system("$command");
               print "i am done";
               last CASE;
And the client stub should look like this :
use LWP::UserAgent;
use HTTP::Request;
use IO;
#use XML::Writer;
my $ua = LWP::UserAgent->new(env_proxy => 1, keep_alive => 1, timeout => 30, );
open INPUT, "<AcceptIncident.xml";
my @greeting = <INPUT>; #-- Read file containing XML struct to send
print "Hello World\n";
my $data_to_send; #-- And build a string of it
foreach my $newItem (@greeting) {
     $data_to_send = "$data_to_send$newItem";
print "Sending \n";
my $head = HTTP::Headers->new(Content_Type => "text/xml", "ID" => "sample");
my $req = HTTP::Request->new('POST', 'http://matrix/cgi-bin/test1.pl', $head, "$data_to_send");
my $response = $ua->request($req);
print $response->as_string; Also you should make sure you have both HTTP::Request amd XML::Simple installed, orelse this will not work.
Hope this is of some help to you.

I want to replace my 1st generation time capsule with the new ac time capsule. What might I use the old 1st generation time capsule for

What use would there be for the 1st generation time capsule if I bought a new ac time capsule?

I just bought hte new ac time capsule (TC), and was using the 1st generation one at home.
=> I use now the old TC as an wifi extender and as a shared hard disk for family
=> the new TC is used with Time Machine for encrypted backup and first high speed network

I need a Random generation of password with the following conditions

***Random Password Generation Program***
Also the password should be stored in the LDAP with SHA format.
The status should be changed to unlock, the password expired column should be updated,
so that the user should change the password when he login to the ecommerce portal
• Minimum length 8 character
• Password must be constructed using characters from at least three of the following categories:
o Upper case
o Lower Case
o Numerals
o Special Characters
• Customer passwords will never expire
• Lock account after 6 consecutive failed attempts

I have the same problem. It ask for all elements that proxt detects ("NetworkError: 407 Proxy Authentication Required").
Solution "No proxy" not works because i aslo require internet.
I have version 10.0.2 on windwos XP, and this happens to me since I update it. On chrome and ie works without prompt.
I upload and example, this page calls facebooks elements (i can't acces facebook) and others, for each element prompt proxy is shown.

HT1222 Does the ipod 4th generation have siri with the ios 6.1 update?

In the iOS 6.1 update details it says,
"Purchase movie tickets through Fandango with Siri (USA only)".
Does this mean the update comes with siri?

Nope, Siri is not available on the 4th generation

Sorting xml with the dom parser

Hello,
Does the DOM parser have any inbuilt soring methods?

I'm not sure what you are looking for. XSL has sort keys on xsl:apply-templates or xsl:for-each
Paul
www.codetelligence.com

File Adapte picking up XML if XSD valid without verifing the XSD in adapter

hi',
I am facing one issue
I have a sample XML file which I want to read through BPEL process
for this I have configured the file adapter with the schema and reading the file adapter with the receive activity
next I have created one XSD file (which file adapter referes to) and one XML file,
File adapter reads it after the XML file gets validated with the XSD which is kept in a location *'/test/xsd/emp.xsd'*,
now the issue is that the file adapter is picking up and initiating the process without verifying the XSD mentioned in the adapter
it is only checking the XML file with the XSD mentioned in the XML,
for example if I have a xml file which is refering to some other schema it also gets read by file adapter without worring about what schema is mentioned in file adapter
please advice me is this the way File adapter works in Oracle BPEL or I am doing some thing wrong
I am using SOA suite 10.1.3.3.0 which is deployed in UNIX enviornment.
thanks
Yatan

thanks Ketan ,
as you suggested, after adding validateXML to true, the XML is getting validated to the XSD in the adapter,
the process is getting invoked and the receive activity is throwing error of 'Invalid XML', this is perfect as I expected
however now the issue is, the file which is invalid in terms of XSD present in the file adapter is still being archived to 'success dir' i.e. 'LogicalArchiveDirectory', ideally it should have moved to fail directory,
but if the XML file is not complete or having some error in terms of the XSD it is refering to 'target namespace' and 'target location'
then it will move to the fail directory and the receive activity is also showing the error,
see this is how I have configured my bpel.xml file for the file adapter.
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="Read_Tph_ProdTrans_File">
<property name=*"prod_trans_success_file" type="LogicalArchiveDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/success</property>
<property name=*"prod_trans_incoming_file" type="LogicalDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/new</property>
<property name="portType">Read_ptt</property>
<property name="rejectedMessageHandlers">file:///aaa/bb/ccc/wis/tph/bpl_inbound/adjust/fail</property>
</activationAgent>
please advice how to bring this adapter to proper behaviour.
thanks
Yatan

Error validating xml with xsd schema on JSDK 1.4

Hi All,
Asked to me do it a Web Service client in Java and validate its xml answer with an xsd file using 1.4 plataform.
I googled and I saw many samples to 1.5 plataform, and few samples to 1.4, but anyway I tried to do what they asked to me.
I got connect with service, got the response and so I went to validate that xml with an xsd file.
But I got an error on that task. The error occurs in the following line
"Schema schema = factory.getSchema();"
Bellow my code
final String JAXP_SCHEMA_LANGUAGE = "http://java.sun.com/xml/jaxp/properties/schemaLanguage";
          final String W3C_XML_SCHEMA = "http://www.w3.org/2001/XMLSchema";
          final String schemaSource = "C:\\GetAuthorizationServiceOutput.xsd";
          final String JAXP_SCHEMA_SOURCE = "http://java.sun.com/xml/jaxp/properties/schemaSource";
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
          factory.setNamespaceAware(true);
          factory.setValidating(true);
          try {
          factory.setAttribute(JAXP_SCHEMA_LANGUAGE, W3C_XML_SCHEMA);
          factory.setAttribute(JAXP_SCHEMA_SOURCE,new File(source));
          catch (IllegalArgumentException x) {
               System.out.println(x.getMessage());
DocumentBuilder builder = null;
          Document document = null;
          try {
               builder = factory.newDocumentBuilder();
               document = builder.parse(new InputSource(new StringReader(ret.toString())));
          } catch (ParserConfigurationException e) {
               e.printStackTrace();
          } catch (SAXException e) {
               e.printStackTrace();
          } catch (IOException e) {
               e.printStackTrace();
          **Schema schema = factory.getSchema();**
          Validator validator = schema.newValidator();
          try {
               validator.validate(new DOMSource(document));
          } catch (SAXException e) {
               e.printStackTrace();
          } catch (IOException e) {
               e.printStackTrace();
and here is the exception :
Caused by: java.lang.NoSuchMethodError: javax.xml.parsers.DocumentBuilderFactory.getSchema()Ljavax/xml/validation/Schema;
Method onLinkClicked of interface wicket.markup.html.link.ILinkListener targeted at component [MarkupContainer [Component id = btBack, page = br.com.weev.finan.mkb_er.extranet.view.relations.RelationsDetails, path = 30:form:btBack.RelationsDetails$4, isVisible = true, isVersioned = true]] threw an exception
wicket.WicketRuntimeException: Method onLinkClicked of interface wicket.markup.html.link.ILinkListener targeted at component [MarkupContainer [Component id = btBack, page = br.com.weev.finan.mkb_er.extranet.view.relations.RelationsDetails, path = 30:form:btBack.RelationsDetails$4, isVisible = true, isVersioned = true]] threw an exception
     at wicket.RequestListenerInterface.invoke(RequestListenerInterface.java:198)
     at wicket.request.target.component.listener.ListenerInterfaceRequestTarget.processEvents(ListenerInterfaceRequestTarget.java:74)
     at wicket.request.compound.DefaultEventProcessorStrategy.processEvents(DefaultEventProcessorStrategy.java:65)
     at wicket.request.compound.AbstractCompoundRequestCycleProcessor.processEvents(AbstractCompoundRequestCycleProcessor.java:57)
     at wicket.RequestCycle.doProcessEventsAndRespond(RequestCycle.java:896)
     at wicket.RequestCycle.processEventsAndRespond(RequestCycle.java:929)
     at wicket.RequestCycle.step(RequestCycle.java:1010)
     at wicket.RequestCycle.steps(RequestCycle.java:1084)
     at wicket.RequestCycle.request(RequestCycle.java:454)
     at wicket.protocol.http.WicketServlet.doGet(WicketServlet.java:219)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:198)
     at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:186)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
     at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor342.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at wicket.RequestListenerInterface.invoke(RequestListenerInterface.java:187)
     ... 39 more
Caused by: java.lang.NoSuchMethodError: javax.xml.parsers.DocumentBuilderFactory.getSchema()Ljavax/xml/validation/Schema;
     at br.com.weev.finan.mkb_er.business.manager.impl.RelationManagerImpl.getAuthorizationService(RelationManagerImpl.java:152)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
     at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:107)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy22.getAuthorizationService(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at wicket.proxy.LazyInitProxyFactory$JdkHandler.invoke(LazyInitProxyFactory.java:377)
     at wicket.proxy.$Proxy39.getAuthorizationService(Unknown Source)
     at br.com.weev.finan.mkb_er.extranet.view.relations.RelationsDetails$4.onClick(RelationsDetails.java:125)
     at wicket.markup.html.link.Link.onLinkClicked(Link.java:254)
     ... 43 more
It's my first time doing that, so I'm confuse to do it.
Thank you
Juliano.

This is how.
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.dom.DOMResult;
import javax.xml.transform.dom.DOMSource;
import javax.xml.validation.Schema;
import javax.xml.validation.SchemaFactory;
import javax.xml.validation.Validator;
DocumentBuilderFactory dbfac = DocumentBuilderFactory.newInstance();
dbfac.setNamespaceAware(true);
SchemaFactory factory1 = SchemaFactory
                    .newInstance("http://www.w3.org/2001/XMLSchema");
Schema schema = factory1.newSchema(new File("person.xsd"));
dbfac.setSchema(schema);
DocumentBuilder dbparser1 = dbfac.newDocumentBuilder();
Document doc1 = dbparser1.parse(new File("person.xml"));
Validator validator1 = schema.newValidator();
DOMSource dm1 = new DOMSource(doc1);
DOMResult domresult1 = new DOMResult();
validator1.validate(dm1, domresult1);

Generation of xml with the XSD

Similar Messages

Maybe you are looking for