Generic Delta without date field and without document number

Hi Experts,
I have created Funtion Module Extractor program, but my strcture not having any date field and document number fields.
Please let me know how to maintain the delta for extractor program.
Thanks in Advance.
Chandra

hi,
it is not mandatory to have doc number or date fields for delta,
u must have other fields which could change and try to find those fields and try, chk with the business for their delta requirement else go with full load.
Ramesh

Similar Messages

Generic Delta: Init, Full Upload and Deltas...

Dear All,
Last week on 10.04.2014 I've created "Generic DataSource with Generic Delta" and used CalDay as Delta-Specific Field and lower limit kept to blank and upper limit to 1. On 11.04.2014 I've initialized the Delta with Data Transfer using Process Chain: Time 1:15 p.m (Note: Posting was on)
see below screen shot:
Result: Process Chain was scheduled to immediate and it executed and initialized the delta and brought records as well. See below screen shot of RSA7:
Q: 1: Why generic delta current status is 10.04.2014, as I'v scheduled delta through process chain on 11.04.2014 @ 20:50: and why Total column is showing 0 records? Even I've checked Display Data Entries with Delta Repetition, but could not find any records?
Following is the InfoPackages which I created for Delta Loads and used in another Process Chain for Delta scheduled (daily @ 20: 50).
Following is the DTP used into Delta Process Chain:
On 12/04/2014 when I checked my InfoCube, and found that same number of records being loaded again despite InfoPackage and DTP were created as Delta, see screen shot:
On 12/04/2014 See below PSA table:
On 14/04/2014 when I checked InfoCube and I saw deltas being loaded successfully: see below screen shot:
On 14/04/2014 see below PSA table:
On 14/04/2014 see below RSA7 BW Delta Queue Maintenance screen shot:
Q: 2: Why am I unable to load the Delta records on the day(11/04/2014) when I initialized it with Data and why same number of records being loaded again on 11/04/2014?
Q: 3: On 11/04/2014, around 1:15 p.m I've initialized Delta with Data successfully and the same day (11/04/2014) was my first load of delta records (Time: 20: 50), could this be a problem? as the posting period was on when I initialized and I tried to load the delta on the same day?
Q: 4: Why the pointer is showing me Current Status: 12/04/2014 today and this time around I can find last delta records from "Display Data" option with Delta Repetition?
Q: 5: Have I missed something in the design or data flow?
Q: 6: How can I verify deltas records accuracy on daily basis; is it from RSA3?
or How can I verify daily deltas with ECC delta records?
Q: 7: What is the best practice when you load full data and initialized delta and schedule deltas for Generic DataSources with CalDay as delta specific field?
I will appreciate your replies.
Many Thanks!!!
Tariq Ashraf

I clearly got ur point.....But
If i have situation like ....." I loaded the LO data from R/3 with Init delta......then i loaded 5 loads of delta too.......due to some error in data now i am trying to load all th data......In this case if i do Full upload it is going to bring all the data till 5 th delta load .......If i do Init delta again it is going to bring the same data as full upload..........In LO while loading both Full load or delta init load we need to lock R/3 users....I believe we can load delta even after full upload by using "Init delta without data transfer"............So that wont be the barrier....then what is the difference or how should i figure out which load should i do.............If i am wrong please correct me.......
Thanks

F4 help for Date field and Validation

Hi Friends,
I am new to BSP programming .I knew getting F4 help in normal ABAP.But i don't know in BSP .
I want simple steps to get F4 for a field on Page as well as date field .
and How to valid those entered dates.
Presently i am using length 10 character variable for DATE without F4 help and No validation.
I think you guys will help me out.
Thanks,
Venkat.O

Welcome to SDN.
for F4 help with validation for dates you can use the following code.
<htmlb:inputField id         = "wf_ad_date"
                                type       = "date"
                                showHelp   = "TRUE"
                                value = "<%= sy-datum %>"
                                visible    = "true"
                                disabled   = "false"
                                required   = "true"
                                maxlength = "10"
                                size       = "10"
                                doValidate = "true"
                                design     = "standard" />
For other type of fields check out this weblog by Thomas Jung
<a href="/people/thomas.jung3/blog/2005/08/22/bsp-value-input-help-popups-version-30 Value Input Help Popups Version 3.0</a>
Regards
Raja

Why does Lion KEEP reversing changes you make in address book and other applications without your consent and without wanting it to??? Plus address book will NOT import old address book contacts from Snow Lepoard 10.6 and keep them. This Lion OXS 7 is ..

Why does Lion KEEP reversing changes you make in address book and other applications without your consent and without wanting it to??? Plus address book will NOT import old address book contacts from Snow Lepoard 10.6 and keep them. This Lion OXS 7 is .. becoming very frustrating ... it will NOT keep changes made in the Address Book and it has destroyed my contacts which I only have electronically since 10.4 in my address book. I am NOT happy with this OS7 it has a lot of issues and faults. How can one stop automatic reversing of data when inputting???
Please help!
Wished I NEVER upgraded to this Lion!!!
Carmelo

Relax. Your address book database is corrupted.
If you are syncing your Contacts with MobileMe or something else, disable it for now.
Backup your address book by going to File>Export>Address Book Archive.
Quit Address Book.
Open your Library by holding down the Option (alt) key while selecting the Go menu in Finder. Select Library. Navigate into your Application Support/AddressBook folder and delete the addressbook-v22.abcddb file.
Open Address Book. It will recreate the database from the raw data.
See how that works. If it is ok, then reenable syncing and see how that works.

Data fields and key fields

Hi,
Data fields and key fields are same as Characteristcs and key figures? Or they are diffrerent?
Thanks,
Radha

HI
Key Fields = Acts as Primary Key for The ODS like Primary of Tables in R3.
Data fields = Apart from Key fields We consider rest as data fields.
Ususally we use Characteristic info Objects and Dates in Key Fields and Key figures in Data fields.
It's decisive factor for overwriting property of ODS or DOS.
Hope this helps.
Regards,
Rangzz
Edited by: Ranganath Kodiugane on Feb 7, 2009 12:14 PM

Purchase Order released date field and table name

Hi,
Please tell me the Purchase Order released date field and table name.
Regards
Deepak

Hi,
Table : EKKO.
Fields : FRGKE,FRGZU.
You can get release date of PO from CDHDR table.
give object value as your po number and check.dont forget to give leading zeros.
The udate will be date field and transaction will be me29n for relaesed po.

Date fields and compare and get the later date of the fields

I am trying to compare these date fields and compare and get the later date of the fields
Tables are
TABCASER
TABCASER1
EVCASERS
Field
Are
TABCASER1.CASER_no
The dates are to be compared and then get the records with the highest or latest date value.
TABCASER1.CASERRECIEVEDDATE
EVCASERS.FINALEVDATES
EVCASERS.PUBLICATIONDATE
EVCASERS.PUBLICATIONDATE
TABCASER.COMPAREACCEPDATE
I have this code but I am trying to figure out what it all means.
I have several questions.
1.
1.     greatest it is used here to compare right? How do I then output this ? do I store it to a var (coldfusion) ultimately , I wish to send it to a page of records
2.     is it necessary to use todate? And to_date? What does this do?
3.     decode, is this necessary too. What does this do? NULL?
4.
5.
6.     when I do get the query results how do I send it to coldsuion and out put to a display.
Someone sent me this code.
is there abetter way of doing this? To compare the dates and store in a var to display. thanks
Here is my code below:
Greatest(
     CASE
          WHEN INSTR(TABCASER1.CASER_no,'-CE') > 0 THEN
     decode(TABCASER1.CASERRECIEVEDDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER1.CASERRECIEVEDDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-ERNIE') > 0 THEN
     decode(EVCASERS.FINALEVDATES,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.FINALEVDATES)
                         WHEN INSTR(TABCASER1.CASER_no,'-MONIE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         WHEN INSTR(TABCASER1.CASER_no,'-NADINE') > 0 THEN
     decode(EVCASERS.PUBLICATIONDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),EVCASERS.PUBLICATIONDATE)
                         ELSE
     decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE)
                    END
          ,decode(TABCASER.COMPAREACCEPDATE,NULL,TO_DATE('01/01/1900','mm/dd/yyyy'),TABCASER.COMPAREACCEPDATE))
          between TO_DATE('#dateformat(form.startDate,"mm/dd/yyyy")#','MM/DD/YYYY') and TO_DATE('#dateformat(form.endDate,"mm/dd/yyyy")#','MM/DD/YYYY')
is there abetter way of doing this? To compare the dates and store in a var to display. thanks

Hi
If you have date datatypes than:
select
greatest(TABCASER1.CASERRECIEVEDDATE, EVCASERS.FINALEVDATES, EVCASERS.PUBLICATIONDATE, EVCASERS.PUBLICATIONDATE, TABCASER.COMPAREACCEPDATE)
from TABCASER, TABCASER1, EVCASERS
where ...-- join and other conditions
1. greatest is good enough
2. to_date creates date dataype from string with the format of format string ('mm/dd/yyyy')
3. decode(a, b, c, d) is a function: if a = b than return c else d. NULL means that there is no data in the cell of the table.
6. to format the date for display use to_char function with format modell as in the to_date function.
Ott Karesz
http://www.trendo-kft.hu

Billing Document and Material Document number and Date (Goods Issue)

Dear Experts,
Is there a way I can find the relationship between a billing document and a material document number and Goods issue date?
Thanks

Hi Abid
Is there a way I can find the relationship between a billing document and a material document number and Goods issue date?
You have to follow the flow from the billing document to the material document. This will only work if the billing document comes from a delivery note.
Billing document => Delivery
LIPS-VBELN = VBRP-VGBEL
and LIPS-POSNR-VBRP-VGPOS
So you have LIPS + LIKP with the LIKP-WADAT_IST as the goods issue date.
Delivery => Material Document Number
You can use the table VBFA with the delivery item as the preceding document number (VBFA-VBELV) and item (VBFA-POSNV) ; you will also have to define the preceding document type as J (delivery) and the document category of subsequent document as R (material document).
Because in SAP nothing is simple, there might more than one material document, because the goods issue (601) movement might have been canceled and issue again. So you will have to decide what to do in that case.
Best Regards,
Franck

Auto Date field and Auto Number field

I am fairly new to this,
I have crated a form using the form wizard in Acrobat Pro 9.0 and I would like to make a field an Auto date field and another an Auto Numbering field. I have read a lot of the posts and there are a lot of recommendation to point the auto number to a database. This is fine but I do not know how to reference that field to an external database. PLEASE HELP!!!! Somebody GEEK me!!

I am fairly new to this,
I have crated a form using the form wizard in Acrobat Pro 9.0 and I would like to make a field an Auto date field and another an Auto Numbering field. I have read a lot of the posts and there are a lot of recommendation to point the auto number to a database. This is fine but I do not know how to reference that field to an external database. PLEASE HELP!!!! Somebody GEEK me!!

"Amount, currency, and date fields and service provider reset"

Hi all,
I am trying to save a trip request via TCode: TRIP but receive the following message:
"Amount, currency, and date fields and service provider reset" Messsage no. PTRA_WEB_INTERFACE150
The system is on ECC6.0 with IS-PS (i.e. Funds management activated).
Anyone encountered this previously - hope you can share your solution.
Thanks in advance.

Hi
I am also facing the same and checked the table mention below and dates are same but still facing the error "Amount, currency, and date fields and service provider reset" along with other error message i.e "Expense type not allowed (T70S_RECEIPT)" .
Please guide .
V_T706B1
V_T706B1_A
V_T706B1_B
V_T706B4
V_T706B4_A

Creating Process Orders Without a Material and Without a Master Recipe

Hi PP experts, anyone knows if it is possible and how to do create Process Orders Without a Material and Without a Master Recipe?
Thanks!!

Dear,
If you want to use a cleanout recipe
T code CORO
create a order w/o material for rework qty
Make the same entries as described under Creating a Process Order With a Material. Use OPJG config to have a default operation defined for the plant and order type combination.
Please find the required details and conditions for creating process orders without master recipe.
http://help.sap.com/saphelp_47x200/helpdata/en/89/a42cb3461e11d182b50000e829fbfe/frameset.htm
Regards,
R.Brahmankar
Edited by: R Brahmankar on Oct 13, 2008 5:12 PM

Extract Year (only) from Date Field and Display in Text Field

I need to extract the year from a user entered date field and display the year in a text field. Can someone help me with the correct script to do this?

Hi,
that's quite easy to realize with FormCalc.
In you date fields exit event add the following code:
textField1 = Num2Date( Date2Num($.formattedValue, "MM/DD/YYYY"), "YYYY")
Note: This sample assumes that your date field formats the date with "MM/DD/YYYY". You may have to change the pattern to make it work at your end.

Payment document cleared and invoice document number cleared

Dear experts,
    Could you please help me to locate (table and field name) what is the payment document number clear and invoice document number cleared ?
    In my point of view, the invoice document number is :
          BSAD-BELNR: Customer Invoice document number cleared
         BSAK-BELNR: Vendor Invoice document number cleared
Is it right ?
How about the payment document number cleared ?
How about the relation between these payment document number clear and invoice document number cleared?
Thank you in advance

Hi
You can see data on invoices   cleared using following tables.
For customer - BSAD
For Vendor - BSAK
For   all invoices ( open and cleared )   it is   BSID & BSIK.
Thanks
kamala

Cash Journal - Document Number and Internal Document number

Dear all,
In Cash Journal, do you know the different between these 2 fields: Document Number (ISCJ_E_POSTINGS-D_POSTING_NUMB) and Internal Document Number (ISCJ_E_POSTINGS-POSTING_NUMBER) ? How we can handle it ?
Thank you very much,
Best regards,
Sylvecat.

Hi,
ISCJ_E_POSTINGS-D_POSTING_NUMB. A cash journal document has a unique number per cash journal and company code ant it is internally assigned. This number is usually used as cash receipt/payment printout number. It is one numbering for both (payments and receipts) and it is retrieved as the current highest number per cash journal + 1.
ISCJ_E_POSTINGS-POSTING_NUMBER. An internal number, based on the number range (01) assigned to your CoCd.
Regards,
Svetlin

Last Purchase Order and FI-Document Number of an Vendor

Hi,
i need for an Vendor the last purchase Order and FI-Document Number.
For purchase Order i read EKKO sort this and get the last one.
For FI-Document Number i read BSIK and BSAK sort this and get last one.
Question: is there any faster way (CLASS, FM or TABLE) to get what i need??
Thanks.
Regards, Dieter

HI Dieter,
You can use transaction code ME2L , where you can list of PO issued a particular vendor. List list shows Po no. indecending order. You can double click select the latest PO and through PO history you can get the FI Document no.
I hope this ansers you query.
Regards
Harish

Generic Delta without date field and without document number

Similar Messages

Maybe you are looking for