Get a json result to display in a list

I a new to Flash builder 4.5.1 and Flex and I try to make a mobile application for Android and iOS that will display a list from a webservice.
The webservice returns the answer in a json.
I use the data/service to create the connection and when I run the test it shows the four fields of the first record, when I select show Raw I see three records.
I bind it to a list and it shows me the first record, I have search all over the internet, but been unable to find an example how to get all records to display in the list. Most examples out there are for are for older Flash builder and mostly shows how to deserilize the json string, but it looks like that is already done in the new Flash builder.
Here is the code that was created.
<s:CallResponder id="Operation1Result" result="Operation1Result.lastResult as NoName1"/>
The NoName1 has the four fields configured as strings.
I have been stock in this for a month, thanks for any help or examples.
Kim

Here is the raw json with 2 records:
I went to a json validator website and I got this result.
The JSON input is valid according to RFC 4627 (JSON specfication).
The JSON input is NOT valid in JavaScript, missing ; before statement (At line #1), (At position #121)
I wrote the webservice my self in Visual Studio using Visual Studios JsonSerializer
{"Amount":"29.7","Finish":"2\/11\/2011 12:00:00 AM","Invoice":"A187.1 ","date":"2\/7\/2011 12:00:00 AM"}{"Amount":"25.76","Finish":"","Invoice":"A188.1 ","date":"2\/7\/2011 12:00:00 AM"}

Similar Messages

How to get nested JSON structure from OData service result

Hi all,
This is what I have done :
I have developed OData service where I am following below steps :
1. Created Stored procedure for the logic
2. Created scripted calculation view and call stored procedure from the view.
3. Created OData Service where I am calling calculation view with multiple parameters.
Every thing is working fine and I am getting proper JSON Result which all the attributes that I am returning from the view in flatten structure.
Additional requirement:
On top of this I have additional requirement where I want to get various aggregation or counts.
For example : from view I am getting all the customers result as result set and I also want some summary level information along with that such as :
1. Total Number of Records
2. Total VIP Customers
3. Total Individual Customers
4. Total Business Customers
Above counts can not be each records level information so I need this details in my OData Service result as separate summary section like nested JSON structure.
For example :
d: {
results: [
__metadata: {
uri: "http://servername:8000/testmulti.xsodata/calmultiview1('123456')",
type: "Cust.Multiview1.calmultiview1Type"
aggregation: {
totalrecords: "",
totalVIPCustomers: "",
totalIndividualCustomers:"",
totalbusinesscutomers:""
ID: "123456",
ENT_ID: 1234,
FIRST_NM: "ABC",
LAST_NM: "XYZ",
CITY: "DELHI",
In above example like _metadata , I am asking how to get aggregation section also in the JSON result?
aggregation: {
totalrecords: "",
totalVIPCustomers: "",
totalIndividualCustomers:"",
totalbusinesscutomers:""
Please suggest best possible way to implement this kind of requirements.
Thanks
- Dharmesh

Don't expect that OData can help you for this. Still you can try the following.
Create a XSJS service where you can execute your procedure manually and get the aggregation as well. From the XSJS , you can loop over the result sets and build your corresponding JSON format. But, you can not implement the features of OData, as the return would be "just" a JSON.
in any way you can establish an association with your main entity and aggregation entity(I am Sure, the worst case), you can get both in the same payload.
Sreehari

DbGetQuery = How to get the results to display?

I am using the following
sqldata <- dbGetQuery(con," select sysdate from dual")
How do I get the result to display?
summary(sqldata) displays the values
if I do dbSendQuery then fetch show the results
help(dbSendQuery) and help(dbGetQuery) go to the same page! dbSendQuery
The documentation says dbGetQuery will connect, get the records and clear; maybe the clear happens before the display?!

Hello Amin,
Here is the way to display the result from the query you provided:
Assign the result of the query to object 'sqldata':
R> sqldata <- dbGetQuery(con," select sysdate from dual")
Type the object name at the R prompt:
R> sqldata
SYSDATE
1 2014-04-28 14:45:14
Sherry

Cannot get BI JDBC query to display results..

My connection to the Oracle DB works fine. The system check in Portal returns OK. The system alias is visible in VC. I can browse tables and views. I can use the BI integration wizard to set up a query, and I am also able to review the output (see the actual table rows) within the query configuration tool.
BUT - I can't get the data to be displayed in an output table. I have dragged a table from the output port of the BI query, the column names are what they should be. When deploying the model I get a warning: 'Element "BI query : "All Data : VC_test" is not in use'.
What am I doing wrong here?
Help MUCH appreciated!!
Henning

Hello
It's necessary to add a "Start point" on the input of the SQL table. Something like:
Start point => SQL table => output table
Guido

How to get DML error message to display

Hi -- I have a report/form combination. When the user creates a record in the form, or cancels, the app branches back to the report results, properly displaying the success or error message from the form page.
When the user updates or deletes a record in the form, a second form is branched to. This form (a dynamic form), allows the user to enter a comment for deleted or updated records, which are archived to a separate table. The success and error messages are set in this form to an app item called DML_RETURN_MSG. The page process that saves the archive comment sets the value of DML_RETURN_MSG properly: it is visible in the session state.
This form then branches back to the report results, but the DML_RETURN_MSG is not displayed. I've compared the definition of both forms very closely, and see nothing obvious that would be causing this.
Is the problem that the first form is a DML form, while the second is dynamic? How can I get the DML_RETURN_MSG to display?
Thanks,
Carol

Carol,
How are you referencing the DML_RETURN_MSG item in the (success? or error?) message? This is done by enclosing the item name in ampersand and period:
This is a success message: &DML_RETURN_MSG.
However, I assume you already know that.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Query to get the hierarchical results

Hi,
Please help me in writing a Query to get the hierarchical results. I want a result like follows...
course-----groupname---TotalMembers---NotStarted---INProgress---Completed
Course1---country1--------12---------------6----------3-------------3
Course1-----state11-------12---------------6----------3-------------3
Course1------District111--10---------------5----------0-------------0
Course1--------City1111----0---------------0----------0-------------0
Course1--------City1112----1---------------0----------0-------------1
Course1--------City1113----6---------------3----------2-------------1
Course1---country2--------12---------------6----------3-------------3
Course1----state21--------12---------------6----------3-------------3
Course1------District211--10---------------5----------0-------------0
Course1--------City2111----0---------------0----------0-------------0
Course1--------City2112----1---------------0----------0-------------1
Course1--------City2113----6---------------3----------2-------------1
Course2---country1--------12---------------6----------2-------------3
Course2----state11--------12---------------6----------2-------------3
Course2------District111--10---------------5----------0-------------0
Course2--------City1111----0---------------0----------0-------------0
Course2--------City1112----1---------------0----------0-------------1
Course2--------City1113----6---------------3----------1-------------2
Course2---country2--------12---------------6----------3-------------3
Course2-----state21-------12---------------6----------3-------------3
Course2------District211--10---------------5----------0-------------0
Course2--------City2111----0---------------0----------0-------------0
Course2--------City2112----1---------------0----------0-------------1
Course2--------City2113----6---------------3----------2-------------1
These are the Tables available to me.
(I have just given some examle data in tables, to get the idea)
"Groups" Table (This table gives the information of the group)
GROUPID-----NAME-------PARENTID
1---------Universe--------1
2---------country1--------1
3---------state11---------2
4---------District111-----3
5---------City1111--------4
6---------City1112--------4
7---------City1113--------4
8---------country2--------1
9---------state21---------8
10--------District211-----9
11--------City2111--------10
12--------City2112--------10
13--------City2113--------10
"Users" Table (This table provides the user information)
userID----FIRSTNAME---LASTNAME
user1-----------Jim-------Carry
user2-----------Tom-------lee
user3-----------sunny-----boo
user4-----------mary------mall
"User-Group" Tables (This table provides the relation between the groups
and the members)
GROUPID---userID
3-------------user1
3-------------user2
3-------------user4
4-------------user5
5-------------user6
5-------------user7
user_score (This table provides the user scores of different courses)
USERID----course-----STATUS
user1------course1-----complete
user1------course2-----NotStarted
user2------course1-----NotStarted
user2------course2-----complete
user3------course1-----complete
user3------course2-----InProgress
user4------course2-----complete
user4------course1-----NotStarted
I will explain the first four lines of the above result.
Course1---country1--------12---------------6----------4-------------2
Course1-----state11-------12---------------6----------4-------------2
Course1------District111--10---------------5----------3-------------2
Course1--------City1111----0---------------0----------0-------------0
Course1--------City1112----1---------------0----------0-------------1
Course1--------City1113----6---------------3----------2-------------1
# "city1111" group has 0 members
# "city1112" group has 1 member (1 member completed the course1)
# "city1113" group has 6 members(3 members notStarted,2 members
InProgress,1 member completed the course1)
# "District111" is the parent group of above three groups, and has 3
members.(2 members NotStarted,1 member InProgress the course1). But this
group has child groups, so the scores of this group has to rollup the
child groups scores also. Thats why it has 2+3+0+0=6 members Not
Started,1+2+0+0=3 members InProgress,0+0+1+1=2 members completed.
# "state11" group also same as the above group.
I am able to get the group hierarchy by using "Connect By" like follows
"select name,groupid,parentid from groups_info start with groupid=1 connect by parentid = prior groupid;"
But i want to get the result as i have mentioned in the begining of this discussion.
I am using oracle 8i (oracle8.1.7).
Thank you for any help
Srinivas M

This may not be exactly what you want,
but it should be fairly close:
SET      LINESIZE 100
SET      PAGESIZE 24
COLUMN   groupname FORMAT A20
SELECT   INITCAP (user_score.course) "course",
         groupnames.name "groupname",
         COUNT (*) "TotalMembers",
         SUM (NVL (DECODE (UPPER (user_score.status), 'NOTSTARTED', 1), 0)) "NotStarted",
         SUM (NVL (DECODE (UPPER (user_score.status), 'INPROGRESS', 1), 0)) "InProgress",
         SUM (NVL (DECODE (UPPER (user_score.status), 'COMPLETE', 1), 0)) "Completed"
FROM     user_score,
         user_group,
         (SELECT ROWNUM rn,
                 name,
                 groupid
          FROM   (SELECT     LPAD (' ', 2 * LEVEL - 2) || name AS name,
                             groupid
                  FROM       groups
                  START WITH groupid = 1
                  CONNECT BY PRIOR groupid = parentid)) groupnames
WHERE    user_score.userid = user_group.userid
AND      user_group.groupid IN
         (SELECT     groupid
          FROM       groups
          START WITH groupid = groupnames.groupid
          CONNECT BY PRIOR groupid = parentid)
GROUP BY user_score.course, groupnames.name, groupnames.rn
ORDER BY user_score.course, groupnames.rn
I entered the minimal test data that you
provided and a bit more and got this result
(It was formatted as you requested,
but I don't know if it will display properly
on this post, or wrap around):
course groupname            TotalMembers NotStarted InProgress Completed
Course1 Universe                        6          2          0          4
Course1   country1                      5          2          0          3
Course1     state11                     5          2          0          3
Course1       District111               2          0          0          2
Course1         City1112                1          0          0          1
Course1         City1113                1          0          0          1
Course1   country2                      1          0          0          1
Course1     state21                     1          0          0          1
Course1       District211               1          0          0          1
Course1         City2113                1          0          0          1
Course2 Universe                        5          1          1          3
Course2   country1                      4          1          1          2
Course2     state11                     4          1          1          2
Course2       District111               1          0          1          0
Course2         City1113                1          0          1          0
Course2   country2                      1          0          0          1
Course2     state21                     1          0          0          1
Course2       District211               1          0          0          1
Course2         City2113                1          0          0          1
Here is the test data that I used, in case
anyone else wants to play with it:
create table groups
(groupid number,
   name     varchar2(15),
   parentid number)
insert into groups
values (1,'Universe',null)
insert into groups
values (2,'country1',1)
insert into groups
values (3,'state11',2)
insert into groups
values (4,'District111',3)
insert into groups
values (5,'City1111',4)
insert into groups
values (6,'City1112',4)
insert into groups
values (7,'City1113',4)
insert into groups
values (8,'country2',1)
insert into groups
values (9,'state21',8)
insert into groups
values (10,'District211',9)
insert into groups
values (11,'City2111',10)
insert into groups
values (12,'City2112',10)
insert into groups
values (13,'City2113',10)
create table user_group
(groupid number,
   userid varchar2(5))
insert into user_group
values (3,'user1')
insert into user_group
values (3,'user2')
insert into user_group
values (3,'user4')
insert into user_group
values (4,'user5')
insert into user_group
values (5,'user6')
insert into user_group
values (5,'user7')
insert into user_group
values (7,'user8')
insert into user_group
values (13,'user9')
insert into user_group
values (11,'use11')
insert into user_group
values (6,'use6')
create table user_score
(userid varchar2(5),
   course varchar2(7),
   status varchar2(10))
insert into user_score
values ('use6','course1','complete')
insert into user_score
values ('user9','course1','complete')
insert into user_score
values ('user9','course2','complete')
insert into user_score
values ('user8','course1','complete')
insert into user_score
values ('user8','course2','InProgress')
insert into user_score
values ('user1','course1','complete')
insert into user_score
values ('user1','course2','NotStarted')
insert into user_score
values ('user2','course1','NotStarted')
insert into user_score
values ('user2','course2','complete')
insert into user_score
values ('user3','course1','complete')
insert into user_score
values ('user3','course2','InProgress')
insert into user_score
values ('user4','course2','complete')
insert into user_score
values ('user4','course1','NotStarted')

Sharepoint 2013 custom search results grouping display template

Hi,
I am trying to implement custom grouping for search result items. I would like to group them by a managed property, but without using result blocks (query rules). The idea is to sort the results by the property and then compare the current item (ctx.CurrentItem)
with the previous item using ctx.CurrentItem.ParentTableReference. If a new property value is detected we insert a new 'group header' (just some simple html). The problem is the ParentTableReference is undefined. Shouldn't there be such a property in current
item object?
I'm implementing this in a custom search result item display template...
Thanks in advance.

Hi,
According to your post, my understanding is that you want to customize search result items display template.
I suggest you get enumerate all properties of JavaScript context object and debug you code to watch the
ctx.CurrentItem object.
The following articles for your reference:
Debugging Display Templates in SharePoint 2013 Search
http://powersearching.wordpress.com/2013/01/25/debugging-display-temlates-in-sharepoint-2013-search/
Enumerate all properties of JavaScript context object in display templates in SharePoint 2013
http://sadomovalex.blogspot.co.uk/2013/06/enumerate-all-properties-of-javascript.html
How to Define a Custom Group Display Template (GroupTemplateId) for the Search Results WebPart via JavaScript
http://www.eliostruyf.com/how-to-define-a-custom-group-display-template-for-the-search-results-webpart-via-javascript/
Creating customized search results in SharePoint 2013
http://www.abelsolutions.com/totm/creating-customized-search-results-in-sharepoint-2013/
Best Regards
Dennis Guo
TechNet Community Support

Why do I get two different results from the same coefficients?

I am getting two different results from the Polynomial Evaluation function.
For the first one, I am getting the coefficients from a Polynomial Fit function. I feed the coefficients from the Fit function into the Poly Eval function and get the correct result of 12.8582 when I evaluate 49940.
For the second one, I create constant array of the SAME values that were returned from the Polynomial Fit function (i typed them in). However, I am getting an incorrect result of -120.7913 when I feed the constant array into the Poly Eval function when I evauate 49940.
How can this happen when I am using the same array values?
Attached is an image of what I am explaining.
Solved!
Go to Solution.
Attachments:
polynomial_evaluation.jpg ‏213 KB

Hi Altran,
are you sure about using the "same" coefficients?
Did you compare them? Did you (atleast) set the display properties to 17 significant digits?
Please attach a VI instead of a picture...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to get sequence overall result in LabView ?

Hello,
Would anyone can help with this tiny problem ?
We have a batch (.bat) that launches a given list of TestStand sequences, which works as expected.
However, we would like to monitor the result of each sequence and display it to the operator.
Our idea is to get the sequence result in a VI, run at sequence end, and add it to a queue, that will be retrieved and displayed on a VI monitor, run separetly.
The only problem we have left is to be able to retrieve the sequence global result. Any idea or suggestion ?
Thanks
Raphael
Solved!
Go to Solution.

Thanks. The problem is not the monitor and how to pass the information to it.
We already have a test monitor (using queues) that is working as expected.
The test sequence is queuing information, mainly at steps end with step result, and the monitor is displaying information from that queue. The queue is resseted at each sequence start.
We would like to derivate that monitor to display only sequences (launched by a batch file) overall-global-final result of all the sequences ran. Using UImessage is maybe a better way, but we do not want to spend time re-writing another monitor.
The problem is how do we retrieve this overall-global-final sequence result in LabVIEW ?

I'm having trouble getting a custom JPanel to display correctly...

HI, I'm having trouble getting a custom JPanel to display correctly. I'm using the JPanel inside a JFrame to display some really custom graphs. The graphing side of this whole thing works flawlessly. The problem I'm having is that when I close the JFrame by using setVisible(false); and then openning it again using setVisible(true); all the information on it is garbage. There are buttons from the JFrame which orgininally opened it and it has trouble openning a second graph if I choose too. I also have the same problem if i move the frame off the screen and move it back. I'd really appreciate any help.
Thanks!

With option #1 -- I modified and rebuilt the 3rd-party JARs and referenced them in NetBeans. When I choose clean and build, the Ant processes results in an error: "jarsigner returns 1". So it doesn't seem to run at all.As long as you rebuilt the jars correctly without the original signature, I think it should work.
An example of unsigning a jar using ant is here:
http://frank.zinepal.com/unsign-a-jar-with-ant
Do you think the multiple-JNLP idea would work if NetBeans didn't apply "my" signature to the 3rd-party JARs? Aside from manually copying the original JARs into the \dist directory, is there a better way to tell NetBeans to leave the 3rd-party JAR alone (ie, don't sign it again)?I think it's supposed to work (it's the mixed code signing situation I referred to in my prior post).
For example, from your description it sounds like the default NetBeans build doesn't really support this style of deployment, so you would have to create a custom build which does what you need and is not triggered by NetBeans - which is doable, but annoying - it's sounds like you tried this, but were unable to get it to work as expected. For NetBeans specific help, you are better posting to a NetBeans forum (though you might be just the second person who has tried to do this with a JavaFX app).
Also need to check the end user experience is acceptable too, because I think the dialog and warning handling for the mixed code situation is different.
Look at the deployment guide section "Using <fx:resources> for Extension Descriptors" - I think it documents how to do what you want if you use a custom build file rather than letting NetBeans do the work:
http://docs.oracle.com/javafx/2/deployment/javafx_ant_task_reference002.htm#CIABGCEE
Hmm, a lot of running around to deploy an app which can open a file . . .

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

How to I get an FLV Skin to display on external sites?

This is thee most frustrating thing! I've been trying to get
my FLV skin to display on other sites when embedded, but the video
is the only thing that shows up. There are no play back controls;
nothing! I can view things just fine on my site (so that is NOT the
problem) – it's just not displaying on other sites.
I am using an FLV component and I do have all the necessary
files loaded in the same folder. It's just when I try embedding the
SWF file on an external site, the only thing that shows up is the
video w/ no controls or skin.
Is there embedding code to include the second SWF file?
OR
Is there a better way in creating a SWF file that includes
the FLV component? ActionScripting or something that needs to be
added???
If so, please explain! I got ALL DAY AND NIGHT! This is
driving me up the wall. There is NOTHING on the web that talks
about this.
Thanks!!!!!

I found a link which informs that not all servers allow the MIME type for "f4v" files. . .
http://forums.devshed.com/flash-help-38/how-do-i-make-f4v-files-play-in-a-web-610155.html
Also, when I tried inserting a FLV object using Media>FLV the menu option only allowed me to insert FLV files, not F4V files. So that comes back to the issue of what type of container you would be using since the Dreamweaver FLV container does not support F4V.

Adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?

adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

How do I get my Macbook Air to display on TV. I have the Apple TV

How do I get my Macbook Air to display on TV ( i have Appple TV divice)?

Hi Delt82,
Thank you for using Apple Support Communities.
To learn more about using AirPlay with your Apple TV please take a look at the information in the article linked to below.
About AirPlay Mirroring in OS X - Apple Support
Take care,
Alex H.

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted!

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!

I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps.

Get a json result to display in a list

Similar Messages

Maybe you are looking for