I'm having trouble getting a custom JPanel to display correctly...
HI, I'm having trouble getting a custom JPanel to display correctly. I'm using the JPanel inside a JFrame to display some really custom graphs. The graphing side of this whole thing works flawlessly. The problem I'm having is that when I close the JFrame by using setVisible(false); and then openning it again using setVisible(true); all the information on it is garbage. There are buttons from the JFrame which orgininally opened it and it has trouble openning a second graph if I choose too. I also have the same problem if i move the frame off the screen and move it back. I'd really appreciate any help.
Thanks!
With option #1 -- I modified and rebuilt the 3rd-party JARs and referenced them in NetBeans. When I choose clean and build, the Ant processes results in an error: "jarsigner returns 1". So it doesn't seem to run at all.As long as you rebuilt the jars correctly without the original signature, I think it should work.
An example of unsigning a jar using ant is here:
http://frank.zinepal.com/unsign-a-jar-with-ant
Do you think the multiple-JNLP idea would work if NetBeans didn't apply "my" signature to the 3rd-party JARs? Aside from manually copying the original JARs into the \dist directory, is there a better way to tell NetBeans to leave the 3rd-party JAR alone (ie, don't sign it again)?I think it's supposed to work (it's the mixed code signing situation I referred to in my prior post).
For example, from your description it sounds like the default NetBeans build doesn't really support this style of deployment, so you would have to create a custom build which does what you need and is not triggered by NetBeans - which is doable, but annoying - it's sounds like you tried this, but were unable to get it to work as expected. For NetBeans specific help, you are better posting to a NetBeans forum (though you might be just the second person who has tried to do this with a JavaFX app).
Also need to check the end user experience is acceptable too, because I think the dialog and warning handling for the mixed code situation is different.
Look at the deployment guide section "Using <fx:resources> for Extension Descriptors" - I think it documents how to do what you want if you use a custom build file rather than letting NetBeans do the work:
http://docs.oracle.com/javafx/2/deployment/javafx_ant_task_reference002.htm#CIABGCEE
Hmm, a lot of running around to deploy an app which can open a file . . .
Similar Messages
-
Having trouble getting a second panel to display
My current project in java involves creating 2 JFrames. One frame to accept information from the user, and another frame to display the answer. I can't get the 2nd from to work properly without a ton of errors. After trimming out some of the code for the 2nd jframe, I've managed to get everything to compile, but the 2nd frame is only displaying the last panel out of 4. I've tried fooling around with the code I cut out, but everything I add creates an error. Any help would be greatly appreciated.
import javax.swing.JFrame;
public class BMI
public static void main (String[] args)
JFrame frame = new JFrame ("Enter Data");
frame.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
BMIPanel panel = new BMIPanel();
frame.getContentPane().add(panel);
frame.pack();
frame.setVisible(true);
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.lang.Float;
public class BMIPanel extends JPanel
private JButton computebutton;
private JTextField nametext, feettext, inchestext, weighttext;
public BMIPanel()
computebutton = new JButton ("Compute");
computebutton.addActionListener (new BMIListiner());
nametext = new JTextField (20);
feettext = new JTextField ("Feet", 6);
inchestext = new JTextField ("Inches", 6);
weighttext = new JTextField ("Pounds", 6);
JPanel namepanel = new JPanel();
JPanel heightpanel = new JPanel();
JPanel weightpanel = new JPanel();
JPanel buttonPanel = new JPanel();
namepanel.add (new JLabel ("Your Name: "));
namepanel.add (nametext);
heightpanel.add (new JLabel ("Your Height: "));
heightpanel.add (feettext);
heightpanel.add (inchestext);
weightpanel.add (new JLabel ("Your Weight: "));
weightpanel.add (weighttext);
buttonPanel.add (computebutton);
setLayout (new BoxLayout (this , BoxLayout.Y_AXIS));
add(namepanel);
add(heightpanel);
add(weightpanel);
add(buttonPanel);
private class BMIListiner implements ActionListener
public void actionPerformed (ActionEvent event)
JFrame BMIframe = new JFrame ("Results");
BMIframe.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
float tempinches;
float BMIndex;
String namestring = nametext.getText();
String feetstring = feettext.getText();
String inchesstring = inchestext.getText();
String weightstring = weighttext.getText();
float feetfloat = Float.parseFloat (feetstring);
float inchesfloat = Float.parseFloat (inchesstring);
float weightfloat = Float.parseFloat (weightstring);
tempinches = feetfloat * 12 + inchesfloat;
BMIndex = (weightfloat/(tempinches * tempinches)) * 703;
String BMIstring = "" + BMIndex;
JPanel namepan = new JPanel();
JPanel heightpan = new JPanel();
JPanel weightpan = new JPanel();
JPanel BMIpan = new JPanel();
namepan.add (new JLabel ("Your Name: "));
namepan.add (new JLabel (namestring));
heightpan.add (new JLabel ("Your Height: "));
heightpan.add (new JLabel (feetstring));
heightpan.add (new JLabel (inchesstring));
weightpan.add (new JLabel ("Your Weight: "));
weightpan.add (new JLabel (weightstring));
BMIpan.add (new JLabel ("Your BMI: "));
BMIpan.add (new JLabel (BMIstring));
BMIframe.add(namepan);
BMIframe.add(heightpan);
BMIframe.add(weightpan);
BMIframe.add(BMIpan);
BMIframe.setVisible(true);
}I'm fairly sure this has something to do with the
frame.getContentPane().add(panel);
rame.pack();stuff, but after playing around with it for an hour I can't seem to get the thing to compile. I've tried putting the code in the main program and inside the action listener with no success.Yes, but you need to use a suitable LayoutManager for the JFrame too (for the JFrame's contentpane, to be more precise). Your code worked fine when I modified your actionPerformed method like so:
// Set the frame's LayoutManager:
BMIframe.setLayout( new GridLayout(4, 1) );
BMIframe.add(namepan);
BMIframe.add(heightpan);
BMIframe.add(weightpan);
BMIframe.add(BMIpan);
// Call pack on the frame to make it its preferred size
BMIframe.pack();
BMIframe.setVisible(true); -
I am having trouble getting sound on video clips I have imported into Premiere Elements 10.
I am having trouble getting sound when importing video clips into Premiere Elements 10. Is someone able to offer me a solution as I have no idea what I have done to cause this to happen.
The clip has sound when opened with windows media player.
Thank youHi Steve,
After reading everybody’s responses I am feeling a little out of my depth. Being new to this I am having difficulty in understanding a lot of the information given to me and also in the information you require from me. It appears that one thing I should never do is mix film from two different cameras. I would really like to fix this one particular clip though as it holds an interview that was taken when leaving Coober Pedy and something that I don’t want to lose.
I have today done some research on the camera that took the offending video clip. It was a Samsung S85 and according to the Samsung website it uses MJPEG video format.
Here are the specifications as per the Samsung website.
Camera Type
Ultra-Compact Point-and-shoot Digital Camera
Image Quality
Image Sensor
1/2.5" 8.3 Megapixel CCD
Effective Resolution
8.2 million pixels
Color Depth
24-Bit RGB
Color Modes
Normal, B/W, Sepia, Negative, Red, Green, Blue, Custom Color
Image File Formats
JPEG (Super Fine, Fine, Normal)
Recorded Resolution
8M (3264 x 2448)
7M (3264 x 2176) - 3:2
6M (3264 x 1824) - Wide
5M (2592 x 1944)
3M (2048 x 1536)
1M (1024 x 768)
Video Recording
AVI Motion JPEG with Audio
640 x 480 @ 30 or 15 fps
320 x 240 @ 30 or 15 fps
Clip length limited only by available memory
5x optical zoom available during video record
Audio Recording
WAV format (monaural)
I downloaded and installed Media Info and Morgan Multimedia MJPEG Codec V3.99.108 today. Do I have to register it to get it to operate? I read the documentation file that came with it hoping to find a clue as what I should do but I could not comprehend the information it contained.
Thank you and other members who have responded to my plea for all the help you have given me.
Judy -
I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68
HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Hi, I am having trouble getting an album to download. I have tried it on both my iPhone and laptop through iTunes but neither works. I am wondering if it could be the size of the album stopping it downloading (212 Tracks) Any Ideas?
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Also review this support aticle as it might be causing due to internet connection: http://support.apple.com/kb/ts1368
Hope this helps. -
I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have an older IPOD classic that I'm having trouble getting new purchases from library to IPOD. I use to have a IPOD icon in the source list on the left side of the screen. Now that is all gone. My purchases are coming up as recently purchased but can't figure out how to get them transferred to IPOD. I also can't find how to confirm setting is for manual not auto sync as the first computer I had blew up and am now using a different one. I haven't had any of these problems prior to the updates.
G'day Mate,
As an avid flight simmer I bought a new soundcard my previous was
an audigy 2 platinum ex with an external module I really liked but somehow all of a sudden I was getting a screech when using FS9 sor I opted to change to the present. Well stone the crows my soundcard was auto updated with new drivers and well you guessed it the soundcard did not show in the sound video controllers window No I have just joined this forum and it looks like3 you may have the answer for me . I am now going to do as you suggest and see what happens.
I shall return with the outcome of my dilemma.
Many thanks for your sound advice ( pardon the pun)
Pat
Ret'd Viet Vet -
Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??
Some clarification may help.
You say you cannot boot normally. It shows a gray screen with the Apple logo.
Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
How did you boot the machine to run Disk Utility? (Which keyboard combinations)? -
I have been having trouble getting my email on my iPad2.
It started when I brought it to the US on vacation (I live in London and my email provider is Virgin Media). It worked once since I returned, but that is it.
I can send emails, but can't get them.
Any ideas, people?Hi Kharels
Just posted this reply to 2 others with same sort of question:
I have the same issue as i have my own email address and only want to use.
There are two ways around this annoying problem. The first is to set up your own domain email account alongside your iCloud one, and when you go to send each email tap on From and you get a choice of emails addresses to reply from... ie your own domain or the iCloud one. This is tedious though.
The other is to set up your iCloud email as normal, then create a new one altogether. Choose 'Other' when creating this new account. Then put for the incoming server mail.me.com, along with your user name and password. For the outgoing server put the server you want to use - ie your own domain one. This is therefore a hybrid account and does work.
Now switch off the email for iCloud (leaving on Calendar, Address Book etc). Switch on the email for your hybrid account (which of course is iCloud incoming as well).
Providing you have directed your own domain email address to your me.com one, you will find the iPhone should behave itself and you can use the folders etc and these will synch with your Mac ok.
Hope this work for you - let us know.
Simon -
Hi,
One of my user was unable to receive email from her desktop outlook, browser and her phone. On her outlook, the status of her exchange is disconnected. Then when she tried to access her OWA, this error prompted below "
"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."
Her emails started coming in again after about 45minutes later. It happened twice today.
Anyone have the same symptoms as mind?Hi,
When user is disconnected to Exchange, please test outlook anywhere connectivity for this user.
Test Outlook Anywhere connectivity
https://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx
Please also check if there are any other events in application log.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support -
I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below. Any suggestions would help.
Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul -
I am having trouble getting my Lightroom 5.0 upgrade to accept my Lightroom 4.4 serial number. I recently installed Windows 8, 64 bit on a second solid state HD on my computer (had a virus problem for which I had to format C and reinstall everything). The new ss HD is drive C and my operating system and my programs are all installed there. All my documents and files are now stored on my original, reformatted drive, which is now drive D. I was using Windows 7, 64 bit. Could all this be the reason my serial number is not being recognized? PHH
Hi 48phh,
Yes Lightroom 5 takes the Serial Number of each previous version and you can do the Upgrade from any 1, 2 3, or 4 version of Lightroom,but somethig different for the Upgrade from the Mac App Store ... see how here: http://helpx.adobe.com/lightroom/kb/upgrade-mac-app-version-lightroom.html
you installed Windows 8 and installing only the operating system, but keeping all the app certainly and during the operation something can be lost, especially if you run Clean after installing the system by deleting the folder containing the old system, it's better to wait to do so.
However, no problem, because to do the 'Upgrade all you need is the old serial number and don't need Lightroom4 to be installed on your machine ...
more details here: http://blogs.adobe.com/lightroomjournal/2013/06/lightroom-5-hot-issues.html -
I'm having trouble getting music from itunes on computer to my iphone?
I'm having trouble getting music from itunes on my computer library to my iphone can someone please tell me what i'm doing wrong?
Hi ckwools,
Welcome to the Support Communities!
What is the specific issue? Are you getting an error message? The article below will provide some general information on syncing with iTunes:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
Cheers,
- Judy -
TS1424 I am having trouble getting Itunes to open
I am having trouble getting ITUNES to work I have deleted itunes and everything associated with it and reinstalled and I still get the same errors,
The application has failed to start because of MSVCR80.DLL
INTUNES WAS NOT INSTALLED CORRECTLY ERROR 7
THIS APPLICATION FAILED TO START BECAUSE ICUDT49.DLL WAS NOT FOUNDGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Having trouble getting ipad 2 email to work
Having trouble getting ipad 2 email to work
Dave, you're not bothering us. I was just messing with you. No harm intended. I apologize. However, you do need to provide more information with regards to how you're having issues setting up your email. You may also want to check out the iPad manual: http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
Maybe you are looking for
-
How to block the Payment for the Rejected Items in MIRO
Dear Sir, Our Scenario : 1. Material Received through 101 Movement type with Inspection Stock 2. Quality will be done and move the stock to either unrestricted or rejection will be done. 3. Payment through MIRO will be done. But we need to keep check
-
Firefox closes when I select one of the sites in my favourites menu.
This seems to happen randomly, when I re-start Firefox and select the same site it loads fine. Firefox and all plug ins are up to date.
-
Hi all: We have developed an application that uses fdf to generate our pdf. We use this function to automatically print our page. this.print({bUI: false, bSilent: true, bShrinkToFit: true});When we open our pdf in Acrobat Professional, we didn´t get
-
Premeire Elements 10: Unknown Error 2131042560: Burn to folder didn't work
I'm using Premeire Elements 10. I kept getting Unknown Error 2131042560 at the 99% point in the burn process. I tried burning my project to a folder and was successful. I then copied the folder onto a DVD, which was also successful. However, the resu
-
13" MacBook Air bracket broken
Maybe some one know can I have part or need all housing?