Get attached file outof incoming mail

Hi,
I've created an interface (Mail2Rfc), in which file is attached to incoming mail message. my basic reference was /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step which demonstrate how to implement getting attached file content via adaptor module.
my issue:
the file name can be changed, therefore the file_name parameter (required by adaptor module) can not be hard coded.
how can i bypass the issue?
Please advise,
Uri

Hi,
10x for your replay.
plz clarify:
what is the module configuration i have to use? which Parameters & Parameters Values?
currently i'm useing:
swap.keyName=Content-Disposition
swap.keyName=Content-Description
swap.keyValue=attachment;filename="MailAttachment-1.xml";
swap.keyValue=MailAttachment-1
I tried to use keyName = payload-name instead of other keyName values, and interface was failing.
Regards,
Uri

Similar Messages

I used to have a indicator of time when attaching file in Yahoo Mail...I no longer have that in Safari 5.1.5...How can I get that indicator back???

I used to have a indicator of time when attaching file in Yahoo Mail...I no longer have that in Safari 5.1.5...How can I get that indicator back???

I tried to find help with the support by web chat for 2 days already, but every time it says that chat is un available (even if it's suppose to be 24/7)... I dont know what else to do.... please help!

Attaching File While Sending Mail

Dear All,
            I want to send mail through sap for that i have used function module 'SO_NEW_DOCUMENT_SEND_API1'. Can anybode tell me how can i attach file in this mail.
Regards,
Mayank

hi check this..
REPORT ZMAIL.
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver .(give email here)
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
data: ld_store(50) type c. "Leading zeros
CONSTANTS: con_cret(5) TYPE c VALUE '0D', "OK for non Unicode
             con_tab(5) TYPE c VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR' INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
*Modification to retain leading zeros
inserts code for excell REPLACE command into ld_store
=REPLACE("00100",1,5,"00100")
    concatenate '=REPLACE("' wa_charekpo-ebelp '",1,5,"'
                             wa_charekpo-ebelp '")' into ld_store .
concatenate ld_store into .xls file instead of actual value(ebelp)
    CONCATENATE wa_charekpo-ebeln ld_store wa_charekpo-aedat wa_charekpo-matnr INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.                    " POPULATE_EMAIL_MESSAGE_BODY
regards,
venkat

Safari 5.0 freezes after attaching files in Yahoo Mail

Since upgrading to Safari 5, I cannot use Yahoo mail after attaching a file to a message. The program acts like there is a dialog box open and it is waiting for a choice to be made, but there is no dialog box.

HI,
BrowserPlus is causing problems when attaching files to Yahoo mail. It's not compatible with Safari 5.
Read here for help to uninstall BrowserPlus:
http://help.yahoo.com/l/us/yahoo/browserplus/uninstall.html
Carolyn

Cannot attach files to Mac Mail

Hello,
I have a new Mac mini running 10.8.4. I am transitioning from a Windows PC. I have setup Mac Mail v 6.5 (1508) against Gmail for both my wife and I on separate Mac user accounts. Both of us see the same behavior from both of our accounts. If I try to attach an image through the attachment button, then nothing happens. Nothing gets attached. If I drag and drop the image, then double click on it I get the following error: "The file xyz.jpg could not be opened because it is empty." Location does not seem to matter. I have also tried word & excel docs and when opened they are just empty. PDFs behave like images. All my files where originally on my Windows PC and migrated to the mac. Here are some entries in syslog:
Image:
Jun 23 22:31:19 falcon sandboxd[951] ([280]): Mail(280) deny file-read-xattr /Users/Mark/Documents/yogi.gif
Jun 23 22:31:19 falcon kernel[0]: Sandbox: sandboxd(951) deny mach-lookup com.apple.coresymbolicationd
Jun 23 22:31:20 falcon sandboxd[951] ([280]): Mail(280) deny file-read-xattr /Users/Mark/Documents/yogi.gif
Jun 23 22:31:21 --- last message repeated 19 times ---
Jun 23 22:31:21 falcon Preview[932]: PVImageContainer initWithURL:file://localhost/private/var/folders/1w/0k_gs_xn53bcjh3x_nhz3650000 0gn/T/com.apple.mail/com.apple.mail/compose/attach-T0x7fd8db4290c0.tmp.7Xfs3Z/yo gi.gif failed, error = Error Domain=NSCocoaErrorDomain Code=256 "The file “yogi.gif” could not be opened because it is empty." UserInfo=0x7f9dc9c4a0f0 {NSURL=file://localhost/private/var/folders/1w/0k_gs_xn53bcjh3x_nhz36500000gn/T /com.apple.mail/com.apple.mail/compose/attach-T0x7fd8db4290c0.tmp.7Xfs3Z/yogi.gi f, NSLocalizedDescription=The file “yogi.gif” could not be opened because it is empty., NSLocalizedRecoverySuggestion= }
Word:
Jun 23 22:31:33 falcon sandboxd[951] ([280]): Mail(280) deny file-read-xattr /Users/Mark/Documents/SCU Parking.doc
Jun 23 22:31:37 --- last message repeated 20 times ---
Jun 23 22:31:37 falcon lsboxd[329]: @AE relay 61657674:6f646f63
PDF:
Jun 23 22:33:15 falcon sandboxd[1010] ([280]): Mail(280) deny file-read-xattr /Users/Mark/Documents/jamaica_visa_app.pdf
Jun 23 22:33:16 --- last message repeated 14 times ---
Jun 23 22:33:16 falcon Preview[932]: PVPDFPageContainer initWithURL:file://localhost/private/var/folders/1w/0k_gs_xn53bcjh3x_nhz3650000 0gn/T/com.apple.mail/com.apple.mail/compose/attach-T0x7fd8db4290c0.tmp.DHafCa/ja maica_visa_app.pdf failed, error = Error Domain=NSCocoaErrorDomain Code=256 "The file “jamaica_visa_app.pdf” could not be opened because it is empty." UserInfo=0x7f9dccd02570 {NSURL=file://localhost/private/var/folders/1w/0k_gs_xn53bcjh3x_nhz36500000gn/T /com.apple.mail/com.apple.mail/compose/attach-T0x7fd8db4290c0.tmp.DHafCa/
Curious, I see the following message repeating constantly in syslog. Probably unrelated, but here it is anyway:
Jun 23 22:39:02 falcon com.apple.launchd[1] (com.crashplan.engine[1114]): Job specified non-existent working directory: /Applications/CrashPlan.app/Contents/Resources/Java
Jun 23 22:39:03 falcon com.apple.launchd[1] (com.crashplan.engine[1114]): Exited with code: 1
Jun 23 22:39:03 falcon com.apple.launchd[1] (com.crashplan.engine): Throttling respawn: Will start in 10 seconds
Jun 23 22:39:13 falcon com.apple.launchd[1] (com.crashplan.engine[1118]): Job specified non-existent working directory: /Applications/CrashPlan.app/Contents/Resources/Java
Jun 23 22:39:13 falcon com.apple.launchd[1] (com.crashplan.engine[1118]): Exited with code: 1
Jun 23 22:39:13 falcon com.apple.launchd[1] (com.crashplan.engine): Throttling respawn: Will start in 10 seconds
Jun 23 22:39:23 falcon com.apple.launchd[1] (com.crashplan.engine[1119]): Job specified non-existent working directory: /Applications/CrashPlan.app/Contents/Resources/Java
Jun 23 22:39:23 falcon com.apple.launchd[1] (com.crashplan.engine[1119]): Exited with code: 1
Jun 23 22:39:23 falcon com.apple.launchd[1] (com.crashplan.engine): Throttling respawn: Will start in 10 seconds
Jun 23 22:39:33 falcon com.apple.launchd[1] (com.crashplan.engine[1120]): Job specified non-existent working directory: /Applications/CrashPlan.app/Contents/Resources/Java
Jun 23 22:39:33 falcon com.apple.launchd[1] (com.crashplan.engine[1120]): Exited with code: 1
Jun 23 22:39:33 falcon com.apple.launchd[1] (com.crashplan.engine): Throttling respawn: Will start in 10 seconds
Jun 23 22:39:43 falcon com.apple.launchd[1] (com.crashplan.engine[1121]): Job specified non-existent working directory: /Applications/CrashPlan.app/Contents/Resources/Java
Jun 23 22:39:44 falcon com.apple.launchd[1] (com.crashplan.engine[1121]): Exited with code: 1
Jun 23 22:39:44 falcon com.apple.launchd[1] (com.crashplan.engine): Throttling respawn: Will start in 10 seconds
Jun 23 22:39:54 falcon com.apple.launchd[1] (com.crashplan.engine[1122]): Job specified non-existent working directory: /Applications/CrashPlan.app/Contents/Resources/Java
Jun 23 22:39:54 falcon com.apple.launchd[1] (com.crashplan.engine[1122]): Exited with code: 1
Jun 23 22:39:54 falcon com.apple.launchd[1] (com.crashplan.engine): Throttling respawn: Will start in 10 seconds
Jun 23 22:40:04 falcon com.apple.launchd[1] (com.crashplan.engine[1123]): Job specified non-existent working directory: /Applications/CrashPlan.app/Contents/Resources/Java
Jun 23 22:40:04 falcon com.apple.launchd[1] (com.crashplan.engine[1123]): Exited with code: 1
Jun 23 22:40:04 falcon com.apple.launchd[1] (com.crashplan.engine): Throttling respawn: Will start in 10 seconds
Thanks for your help,
Mark

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

In Firefox, can't attach files to Yahoo Mail outgoing messages. Yahoo Mail works fine in Internet Explorer though.

Since yesterday, when I switched from Comcast to AT&T as my broadband internet connection, I have not been able to attach files to my Yahoo mail messages using Mozilla Firefox. I don't have this problem when using Internet Explorer, but my default browser is Firefox by choice. Is this a Yahoo issue or a Firefox issue? Can you help me resolve it?

Not helpful. 'clearing Firefox's cache' is not helpful, since 'cache' doesn't show up in any of the Firefox pulldown menu choices (wasted time looking for that), and the plethora of things 'recent' and 'history' to choose to act on in these menus is also a possible waste of time, not to mention removing useful info for no reason.
I, too, have had this problem 'intermittently' for many months, always involving the 'first' file to attach in a Yahoo! email, and I've always used this workaround OK: click on the filename showing as 'being attached' (while Yahoo's doohickey round spinner denoting 'in progress' whirls and whirls to no effect) and use "Remove File"; THEN, REPEAT 'attach file' task & it then works, if slowly. After that for the same email, attaching add'l files NEVER HAS A PROBLEM.
SO, now today, without any software update yet (I've downloaded Firefox v.11 & will install shortly), at numerous attempts during the day, I CANNOT get the FIRST file to attach in a Yahoo! email. Simply, utterly, frustrating without any rhyme or reason. "Everything else, on plethora of sites, working fine."
thanks.

Unable to get source file content as mail body in file to mail scenario

Hi Friends,
I am facing one problem with one of my file to mail scenario in PI(SP9). I have done bypass scenario(without IR only with ID objects). Scenario is working fine, i am getting mail also. But my requirement is i want complete source file content as a mail body (not xml format, text format). I have checked all options, but configured scenario bydefault taking source content as a attachment and mail body is empty. I have tested below options
1. If i choose message protocol as FCC mechanism at source side content at target side i am getting xml format as a attachment( In mail adapter i have selected message protocol as xi payload, and without packate option on mail adapter). If i choose message protocol as xi all, i am getting 2 files as a attachment (one file as a payload content and second file as a source file content in xml format).
2. If i choose message protocol as file at souce side that time i am getting source complete content as a attachment at target side in xml format, but mail attached file content is flat file(.xml extension) format. When i tried to open attachment file that time i am getting error in explorer, but i can see only one row in explorer remaining rows unable to see.
Please share your ideas on this.

Hi,
Follow below steps
1. First basis level need to configure setup(SMTP) for mail. After that only mail will go from SAP.
2. Source side depending on requirement take communication channel(idoc, file etc)
3. Receiver side communication channel take mail adapter and configure below setup
   3.1 select message protocol XI ALL/ XI PAYLOAD(WITH PACKAGE or WITHOUT PACKAGE)
   3.2 if message protocol is XI ALL, the complete content will be sent as a attachment along with payload file
   3.3 if message protocol is XI PAYLOAD, the source message, the source message will be sent as attachment. Playload file filter automatically.
   3.4 If you use PACKAGE option on mail adaper, this time source strucute need to import from SAP (some standard structure only will be support, without strucutre we can't work). If you choose package option no need to give mail id on communication channel, we need to pass mail id's from source structure.
I hope now clear.

Attaching Files to Yahoo Mail

Hello,
I am trying to attach files that I have just recently imported from my digital camera to Yahoo Mail. When I go to attach files, then to Pictures on the menu, I then click on Iphoto library, thats as far as it will go unless I want to attach the entire library (which I don't). Does anyone know how I attach the specific files I want? Thanks for all the help!!

DeAnza
Welcome to the Apple Discussions.
There are three ways (at least) to get files from the iPhoto Window.
1. Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. Show File: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To upload to MySpace or any site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
Regards
TD

Cant attach files using yahoo mail

When I attempt to attach a file in yahoo mail i get an error message. I can attach the files if I use Firefox

The problem is Safari 6...it's buggy and wouldn't allow me to attach any file types to a yahoo email note. I downloaded Chrome and everything works fine. This is my first Apple machine and I have to say I'm disappointed in their Safari browser. The sales guy said I was "purchasing an elegent system that would work right out of the box", I didn't anticipate having to do work-around solutions on day one. What a joke.

Problems attaching files to e-mails

After installing Lyon, from my wife's user she can't attach files to an e-mail. The window opens but only shows folders and the folders can not be opened. I can do it from my user. What could be happening?

This could be a hardware problem, or it could be software problem.
First... Get a full backup of your disks by booting from the DVD and using Disk Utility to copy the data to an external storage device, on the off change the disk or memory or server is failing; don't lose ground here, and try to avoid losing data. Always, always, always have a good backup before you start hardware or software repairs.
As Christoph recommends, do check the logs. Rather than looking at the directories directly, I'd suggest doing this using the Console.app tool (as that's easier than rummaging in /var/log, if you're not already comfortable in the command shell) and see if there are any relevant errors being reported.
It appears this box is critical, and doesn't have a backup, or spare parts, or local available support. I'd expect there are folks in the Denver area that can visit the site and sort out the hardware or software trigger, if your coworkers aren't in a position to assist here.
If the box is under AppleCare, I'd plan for a trip to get the box looked at and potentially repaired.
If the box is not under AppleCare, I'd look for a spare disk. Or better (but more expensive), acquire (or bring along?) a spare Mac Mini (Server?) and probably either used or off eBay or such, as you'll want to have a spare for any potential hardware failure. (It's better to have two of the same, and newer Mac Mini (Server?) boxes will arrive with (and require) Lion (Server?) and not 10.6.8.
Usual path for a recovery here is an external backup (via booting the DVD and using Disk Utility to get that copy, and preferably a couple of external, full, current, copies of the data) and using the "migrate" option after a wipe and reinstallation, to bring a copy of the disk data back in.

Can not attach files to certain mail accounts in mail

I have three e-mail accounts (pop3) which I use Mail to get and send mail. But it seems I can only attach files to one account and not the other two accounts. the only workaround I found is to start attaching the files to the account which can take attachments and before I sent switch to the other account. Surprisingly the Attachment stays.
any idea

Hi Caroline,
Are you trying to attach a file to the message without typing anything in the message body? You need to have typed something, even a space, in the message body before attachments will attach.
Not sure exactly when, but this has been a 'feature' of Mail for a while now, and one that I personally dislike.

Can not attach file to g-mail

Latley I am not able to attach files in my G-mail. There are small Word files. Everytime I try it, finder freezes. My 8 year old Thinkpad is faster than my Macbook Air!

You are mostly misinterpreting the problem (and 'view as icon' will only mask the 'solution').
You see, what you are experiencing is a facet of your email application.
What other users see will be a facet of their email application.
To explain, if you're using Mail.app you should be aware that Mail.app can interpret and display a wide variety of file formats - images, PDF, video, etc., etc.
When you 'attach' such a file to a message Mail.app, by default, displays the content since this is what most people want. You have the option to just display an icon, but that's only really relevant for you.
When the recipient gets the message what they see depends upon their client. If their client can interpret and render file attachments then they'll see the image. If it can't, they'll see an attachment link.
Moreover, you have no control over this. It is entirely dependent on the mail client you are using, and the mail client the recipient is using. Even if you attach a file and 'view as icon', that has no bearing on whether it will appear as an icon or an inline document when it gets to the recipient - that's up to their browser abilities/settings (just like attaching as an image won't display as an image on the recipient's system if they can't display the file format, or their preferences are set to not do so).
So knock yourself out viewing your attachments as icons, but don't expect that it will make any difference to the recipient.
The only way you can overcome this is to send attachments in a file format that can't normally be displayed, such as a .zip archive.

The old attaching file to e-mails chestnut

Hi Folks.
Here's the deal. On my own independant Oracle 9i DB running on my machine I am able to generate and send an e-mail using UTL_SMTP. I am able to attach a file to it as well!! No problems at all.
However..
The 'Live' DB is running on the server and it is an 8i DB.
I have run the relevant initjvm code, set the UTL_FILE_DIR to * (Just for development) and I have setup the SMTP service.
The problem I have is that when I run my Forms module and attempt to send the e-mail in a Client-Server setup the e-mail is generated, the to, from, subject and message elements are all there but no matter what I seem to try the specified file on the 'client' machine is not getting attached. I have tried setting the UTL_FILE_DIR to the full Windows path of the file I want to attach and still no joy.
Does anyone have any suggestions?
Many thanks
Simon

don't think it is possible on 8i to send an email with attachment (using utl_smtp).
You could use the javamail api provided for free by sun.
you can find more information on http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:255615160805
greetings
Freek D
Hi Folks.
Here's the deal. On my own independant Oracle 9i DB running on my machine I am able to generate and send an e-mail using UTL_SMTP. I am able to attach a file to it as well!! No problems at all.
However..
The 'Live' DB is running on the server and it is an 8i DB.
I have run the relevant initjvm code, set the UTL_FILE_DIR to * (Just for development) and I have setup the SMTP service.
The problem I have is that when I run my Forms module and attempt to send the e-mail in a Client-Server setup the e-mail is generated, the to, from, subject and message elements are all there but no matter what I seem to try the specified file on the 'client' machine is not getting attached. I have tried setting the UTL_FILE_DIR to the full Windows path of the file I want to attach and still no joy.
Does anyone have any suggestions?
Many thanks
Simon

Attaching files crashes Mac Mail and Thunderbird

Just upgraded from Mountain Lion to Mavericks 10.9.3 on a 2012 Mac Mini 4 core. When attempting to add an attachment to an email, both Mac Mail and Thunderbird start with the spinning beachball and never recover. Force Quit is the only option. Even after that, the Finder has strange screen artifacts left over from Mail (attach file dialog box) and Finder must be relaunched as well.
Dragging and dropping files works okay with Mac Mail. This option does not exist when using Thunderbird, so no workaround available for that App. Also, Mac Mail only gets stuck when attempting to attach files on the desktop. Files from other locations attach OK.
Already tried Repair Permissions, Repair Disk, Reinstalled Mavericks with no change. For now, I have gone back to Mountain Lion since this is a deal breaker, even though everything else seems to work ok (except for the occasional brief spinning beach ball).

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I can no longer attach files in Yahoo mail since upgrading to FireFox 4.0.1. I click the "attach" button and nothing happens - no file list to select from appears; nothing.

Since upgrading to Firefox 4.0.1 the "attach files" function in my Yahoo Mail account no longer functions. When I click the "attach files" button nothing happens - nothing. No file selection box opens, no error message appears, no pinwheel of death, nothing.
The "attach files" button is no longer 'hot' in FF 4.0.1 either = the "little hand" icon does not appear when I scroll over it. Other action buttons are still 'hot' ("attachments", "emoticons", "format", "hide bcc"etc.) - just not the "attach files" button.
The Yahoo Mail "attach files" function still works when I use my Safari browser, however. So, it appears to be a FF4.0.1 issue.
(Intel MacBook, Snow Leopard, 2gb ram, 360gb hd)

You can try to delete the file mimeTypes.rdf
See "Reset Download Actions"
* http://kb.mozillazine.org/File_types_and_download_actions

Get attached file outof incoming mail

Similar Messages

Maybe you are looking for