Get data from PNPCE LDB

Hi all,
I am workng on ABAP Hr.In it I am using PNPCE LDB, when I
use GET PERNR statement it don't give any syntax problem but the selection screen does not generate due to GET PERNR statement.
Is there any Other statement to find the PERNR.
Points will be sured for valuable answers.
Thanks
Sanket sethi

In addition, the PERNR structure must be declared in the report using the 'TABLES PERNR' statement. You can only use the PERNR structure again in certain circumstances. The use of the 'GET PERNR' event is therefore forbidden. Instead, use the 'GET PERAS' event. Except for the PERNR-PERNR component, all other components of the PERNR structure are no longer filled and have initial values.
In addition to the 'GET PERAS' event, you can also use the 'GET PERSON' and 'GET GROUP' events. To be able to use these events, you must declare them using the NODES statement ('NODES PERSON', 'NODES GROUP', or 'NODES PERAS').

Similar Messages

Get data from PNPCE LDB in ABAP hr

Hi all,
I am workng on ABAP Hr.In it I am using PNPCE LDB, when I
use GET PERNR statement it don't give any syntax problem but the selection screen does not generate due to GET PERNR statement.
Is there any Other statement to find the PERNR.
Points will be sured for valuable answers.
Thanks
Sanket sethi

A report that wants to use the PNPCE must enter this in its report attributes under Logical database.
In addition, the PERNR structure must be declared in the report using the 'TABLES PERNR' statement. You can only use the PERNR structure again in certain circumstances. The use of the 'GET PERNR' event is therefore forbidden. Instead, use the 'GET PERAS' event. Except for the PERNR-PERNR component, all other components of the PERNR structure are no longer filled and have initial values. This kind of programming (with the exception of PERNR-PERNR) therefore not permitted.
In addition to the 'GET PERAS' event, you can also use the GET PERSON' and 'GET GROUP' events. To be able to use these events, you must declare them using the NODES statement (NODES PERSON', 'NODES GROUP', or. NODES PERAS'.LdB's for HR are as follows:
PA----
PNP
Payroll----
PNPCE
Recruitment -
PAP
Orgmanagement -
PCH
PA report Example in attrubutes u have to add LDB is PNPCE
REPORT ZHR_TEST.
Type-Pools *
TYPE-POOLS : slis.
Nodes *
NODES: person,group,peras.
Tables *
TABLES: pernr,t512w,tfkbt,pa0022,pa0016,bkpf.
Infotypes *
INFOTYPES : 0000, "Actions
                     0001, "Org Details
                     0022, "Education Details
                     0041, "Date Specification
                     0002, "Personal Details
                     0016.
Internal Tables *
DATA :BEGIN OF t_output OCCURS 0,
           pernr TYPE pernr_d, " Personnel No.
           ename TYPE emnam, " Employee Name
           btrtl TYPE btrtl, "Personnel Subarea
           btext TYPE btext, "Personnel Subarea Text
           persk TYPE persk, "Grade
           ptext TYPE pktxt, "gradeText
END OF t_output.
DATA: t_fcat TYPE slis_t_fieldcat_alv.
ALV Variable
DATA : w_fieldcat TYPE slis_t_fieldcat_alv,
            wa_fieldcat TYPE slis_fieldcat_alv.
Event : GET Pernr *
GET peras.
PERFORM read_data. "Data Selection
Event : End-Of-Selection *
END-OF-SELECTION.
PERFORM f_addcat. "Field Cat
PERFORM f_display. "Display
*& Form read_data
FORM read_data.
*Organizational Assignment
rp_provide_from_last p0001 space pn-begda pn-endda.
IF pnp-sw-found EQ 1.
t_output-pernr = p0001-pernr.
t_output-ename = p0001-ename.
t_output-btrtl = p0001-btrtl.
t_output-persk = p0001-persk.
*Personal sub area text
SELECT SINGLE btext FROM t001p
INTO t_output-btext
WHERE btrtl = t_output-btrtl.
*Grade text
SELECT SINGLE ptext FROM t503t
INTO t_output-ptext
WHERE persk = t_output-persk AND
sprsl = 'EN'.
ENDIF.
APPEND t_output.
CLEAR t_output.
ENDFORM. "
*& Form f_addcat
FORM f_addcat .
*************Filling field catelog here.**************
*& Form f_display
FORM f_display.
*Local Variable
DATA : lv_repid LIKE sy-repid,
ls_layout TYPE slis_layout_alv.
lv_repid = sy-repid.
ls_layout-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = lv_repid
is_layout = ls_layout
it_fieldcat = t_fcat
i_save = 'A'
TABLES
t_outtab = t_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f_display

Can we get data from business views in CR 2008/XI?

Hi All,
Can we get data from business views in CR 2008/XI?
If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
Thank you,
Krishna Pingali

Hi Krishna,
Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
Contact our Sales department for pricing and availability.
Thank you
Don

How to get data from hard drive in dead iMac?

I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

Funds management cube getting data from 4 ods, data not seen in cube

Hello all,
I am working on funds management cubes (0PU_C02 and 0PU_C03). These two cubes get data from like 7 or 8 ODS. Can someone tell me which are the ODS which feed to respective cubes. I have the mappings done but i am getting very confused.
In the ods 0PU_O44 there is RLDNR for Ledger and I can see that data in ODS but when i run load to cube I dont see the ledger data (its direct mapping there are no routines or rules).
Is there any sequence with wihic we have to load the data?
Thanks
Message was edited by: Raj M

Hi Raj,
I was going thru the forums who has knowledge in Public sector when i came accross ur forum.Can i get your email id..i have some questions to ask regarding student administration.
thanks.

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

Get date from Oracle when local time zone is different from Oracle time zon

Hi!
Local machine time zone= +2
Oracle time zone= +1
I set date to Oracle using java.sql.Date.
From application I save date at 00:30 clock and send e.g. 28.06.2002, but in Oracle date is save as 27.06.2002 01:00 (hour=01 , I suppose that is because java.sql.Date hasn't time the Oracle set it time = time zone=+1) And when I get date from Oracle I get incorrect date. In SQL I don't use date masks. Maybe solution is to use java.sql.Timestamp object (when save date to Oracle) instead of java.sql.Date?
But if I save date at e.g. 01:00 clock and send e.g. 28:06.2002 in Oracle, date is save as 28.06.2002 01:00 and when I read from Oracle I get correct date.
Thank you.

Hi!
Local machine time zone= +2
Oracle time zone= +1
I set date to Oracle using java.sql.Date.
From application I save date at 00:30 clock and send
e.g. 28.06.2002, but in Oracle date is save as
27.06.2002 01:00 (hour=01 , I suppose that is because
java.sql.Date hasn't time the Oracle set it time =
time zone=+1) Presumably you are using setTimestamp() to store the value. If you are explicitly using a varchar (string) then you will have to correct the timezone your self.
And when I get date from Oracle I get
incorrect date. In SQL I don't use date masks. Maybe
solution is to use java.sql.Timestamp object (when
save date to Oracle) instead of java.sql.Date?The method setDate/getDate store a 'date' which is not the same as a 'date and time' for which setTimestamp/getTimestamp are used.
But if I save date at e.g. 01:00 clock and send e.g.
28:06.2002 in Oracle, date is save as 28.06.2002
01:00 and when I read from Oracle I get correct date.
Thank you.

Get date from Calendar Promt

Hi Experts,
Is it possible to get date from Calendar Prompt when operator is "greater then or equal to". In this setting I can not set presentation variable for prompt, why? There is other way to get selected date?
Thanks in advance for any suggestion
Regards,
Esk

Eskarina wrote:
Hi Experts,
Is it possible to get date from Calendar Prompt when operator is "greater then or equal to". In this setting I can not set presentation variable for prompt, why? There is other way to get selected date?
Thanks in advance for any suggestion
Regards,
EskThe reason the Set Variable piece disappears is because a presentation variable cannot contain multiple values. If you want to perform a calculation on a date to filter your report, do this:
1) Keep the Operator as "is equal to/is in."
2) Now set your PV to what you want.
3) In your report, build a CASE statement or use the TIMESTAMPADD function to make whatever calculation you want.
Example: Let's suppose you wanted to filter your report for all Sales Dates "greater than or equal to" the prompt selection. You would set the date prompt to "equal" a date a user selects and then save it to your Presentation Variable, say pv_SalesDate.
Now in your report on your Sales Date column, put a filter like this:
tablename."Sales Date" >= '@{pv_SalesDate}'
This will achieve what you are looking for.

Get date from portal in a web dynpro?

hi all,
how get date from portal in a web dynpro???
thanks.

new Date(System.getTimeInMillis());
Good luck, Roelof

Help needed with variable - trying to get data from Oracle using linked svr

Sorry if I posted this in the wrong forum - I just didn't know where to post it.
I'm trying to write a simple stored procedure to get data from an oracle database via a linked server in SQL Enterprise manager. I have no idea how to pass a variable to oracle.
Here's how I would get the variable in SQL:
declare @maxkey INTEGER
select @maxkey= MAX(keyfield) from [server].Data_Warehouse.dbo.mytable
select * from [server].Data_Warehouse.dbo.mydetailtable where keyfield=@maxkey
the select statement I need to do in oracle would use that variable like this:
select * from OPENQUERY(OracleLinkedServer,'select
* from ORACLEDB.TABLE where keyfield > @maxkey')
and I get this message: OLE DB provider "OraOLEDB.Oracle" for linked server "OracleLinkedServer" returned message "ORA-00936: missing expression".
I realize that I can't pass the @maxkey variable to oracle - so how do I accomplish this?

Please refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804]

How to get data from subsites list of SharePoint 2010 in ssrs

Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
Kishore

Hi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT

How can I get Data from the Sound cart in Labview? Does a VI exist?

How can I get Data from the Sound cart in Labview? Does a VI exist?

Yes, there are VIs for acquiring data from Sound cards. And examples too. If you don't have LabVIEW yet, do a search on NI's site for example VIs.
Khalid

How can i get data from another database SQL Server use database link from

I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

hi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar

Cant get data from text file to print into Jtable

Instead of doing JDBC i am using text file as database. I cant get data from text file to print into JTable when i click find button. Goal is to find a record and print that record only, but for now i am trying to print all the records. Once i get that i will change my code to search desired record and print it. when i click the find button nothing happens. Can you please take a look at my code, dbTest() method. thanks.
void dbTest() {
DataInputStream dis = null;
String dbRecord = null;
String hold;
try {
File f = new File("customer.txt");
FileInputStream fis = new FileInputStream(f);
BufferedInputStream bis = new BufferedInputStream(fis);
dis = new DataInputStream(bis);
Vector dataVector = new Vector();
Vector headVector = new Vector(2);
Vector row = new Vector();
// read the record of the text database
while ( (dbRecord = dis.readLine()) != null) {
StringTokenizer st = new StringTokenizer(dbRecord, ",");
while (st.hasMoreTokens()) {
row.addElement(st.nextToken());
System.out.println("Inside nested loop: " + row);
System.out.println("inside loop: " + row);
dataVector.addElement(row);
System.out.println("outside loop: " + row);
headVector.addElement("Title");
headVector.addElement("Type");
dataTable = new JTable(dataVector, headVector);
dataTableScrollPane.setViewportView(dataTable);
} catch (IOException e) {
// catch io errors from FileInputStream or readLine()
System.out.println("Uh oh, got an IOException error!" + e.getMessage());
} finally {
// if the file opened okay, make sure we close it
if (dis != null) {
try {
dis.close();
} catch (IOException ioe) {
} // end if
} // end finally
} // end dbTest

Here's a thread that loads a text file into a JTable:
http://forum.java.sun.com/thread.jsp?forum=57&thread=315172
And my reply in this thread shows how you can use a text file as a simple database:
http://forum.java.sun.com/thread.jsp?forum=31&thread=342380

How to get data from Oracle using Native SQL in SAP.. Problem with date

Hi Masters.
I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
I wrote this code and it works fine without the statement of where date > '01-09-2010'
But i need that statement on the select. I read a lot about this issue, but no answer.
My code is (this code is in SAP ECC 6.0)
DATA: BEGIN OF datos OCCURS 0,
      id_numeric(10),
      component_name(40),
      comuna(10),
      record_id(10),
      status,
      sampled_date(10),
      END OF datos.
DATA: c TYPE cursor.
EXEC SQL.
connect to 'LIM' as 'MYDB'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'MYDB'
ENDEXEC.
EXEC SQL PERFORMING loop_output.
SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
into :datos from lims.SAMP_TEST_RESULT
where     date > '01-09-2010'
ENDEXEC.
EXEC SQL.
disconnect 'MYDB'
ENDEXEC.
How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
Any help
Regards

Please refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804]

Get data from PNPCE LDB

Similar Messages

Maybe you are looking for