Get employee photo and display the photo in external system.

Hi,
We start to work with the portal....We want an application that display the employee photo..
The photo is the same one that appear in pa20/30...
We create the photos in OAAD and have a table repository.
How from here i can use this to build a RFC that return "data"..that from the external system we can show the photo,
Thanks.

write a RFC which uses
'HR_IMAGE_EXISTS' to get the image document id and then use 'ALINK_RFC_TABLE_GET' to image in JPG format convert the returned RAW table to xstring format using SCMS_BINARY_TO_XSTRING pass the resulting xstring as the export parameter of this RFC .
portal application can now use this xsring to render the image.
Regards
Raja

Similar Messages

Having issues receiving MMS and/or media content. I have visited several forums and did successfully receive at least one photo and sent one photo sucessfully. However, I am now unable to receive media via MMS. Phone displays message: "Get Media Content N

Having issues receiving MMS and/or media content. I have visited several forums and did successfully receive at least one photo and sent one photo sucessfully. However, I am now unable to receive media via MMS. Phone displays message: "Get Media Content Now 30KB", but it only emits a tone after pressing. I have add a MMS VPN already. Any suggestions??? Thanks!

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Since I synced my ipad to my iMac I have duplicate photos appearing in the Photo section on my iPad and one can be trashed but the other one can't. How can I get rid of the ones without the trashcan?

Since I synced my ipad to my iMac I have duplicate photos appearing in the Photo section on my iPad and one can be trashed but the other one can't. How can I get rid of the ones without the trashcan?

Thanks so much. I was afraid to mess with that. But when I unsynced them, it worked.

How can I get rid of a green box with a white check mark in it this box is covering some of my photos and on the windows icon for firefox.

How can I get rid of a green box with a white check mark in it this box is covering some of my photos and on the windows icon for firefox. edit

When I search for solutions, I find several references to the backup feature of Norton 360. There also were references to MozyHome and McAfee.
http://community.norton.com/t5/Norton-360/Green-check-marks-on-icons-N360/m-p/40982
http://answers.microsoft.com/en-us/windows/forum/windows_xp-pictures/white-check-mark-in-a-green-box/71b70580-b5f1-4336-8d72-71faf1f55cd6

Difficulty sending photos through iPhoto 11 often get a connection error. When I go to my email and copy the photos in email the emails go out always with never a problem

I have difficulty sending photos through iPhoto 11 often get a connection error. When I go to my email and copy the photos in email the emails go out right away and never seem to have a connection problem? Why did they cahnge the process for sending photos form iphoto?

It is an addition option some people like and other do not (I do not) -- to use it as always is trivial - in the iPhoto preferences set Apple Mail as the e-mail client
LN

IPhoto 9.6.1 is not displaying the photos in my iPhoto library.

My computer: I'm running Yosemite 10.10.2 (14C1514) on an iMac (21.5 inch, Late 2009) with a 3.06 GHz Intel Core 2 Duo processor. Memory is indicated as: 4 GB 1067 MHz DDR3
The problem: Yesterday, I installed an update of iPhoto from the App Stere. My new version is 9.6.1. I opened iPhoto today, and it said that my iPhoto library needed to be updated and that permissions needed to be repaired. Then iPhoto opened to a start screen with a graphic that says "To get started with iPhoto, do any of the following: Connect a camera or memory card, drag photos into iPhoto, and choose File>Import to iPhoto library.
My photos are not showing up.
I went to File>Switch to Library... which brings up a dialogue: Which photo library do you want iPhoto to use? The default indicated is the location of my existing iPhoto library. Nevertheless, iPhoto isn't displaying any of my photos.
I should note that the hard drive on which I keep my iPhoto library is working really hard. So maybe the updating and permissions repair is still happening? A look at the hard drive's finder window indicates that it was last updated at 1:36 PM today. It's now 2:02. Can repairs and updating be still going on?
I'll wait it out, but in the meantime, if anyone can advise another course of action, I'd appreciate it.
Beedubya

Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I have recently updated to iPhoto 9.2.1, more by accident I guess. In the older version off iPhoto when I imported photos and gave the event his own name, this name was also used in the "masterfile"

I have recently updated to iPhoto 9.2.1, more by accident I guess. In the older version of iPhoto when I imported photos and gave the event his own name (for exampample "110723 birthday son 2011"), this name was also used in the "masterfile", so I could find the file by his name ("110723 birthday son 2011") in the "masterfile" on my HD and copy and paste it from there to other computers.
In the new version the file gets stored under a seemingly random number, which does not give me any information about the content.
Is there a way to fix this? Would it be different in apperture?
Thanks
Harald

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

I am using both PSE 13 and Lightroom 5. When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different. Why doesn't it appear edited?

People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
So IMO we can divide image processing into:
operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
RP

HT1229 How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what.

How do you transfer photos to external backup and keep the photos in events with event name or with description name. Each time I have tried to transfer them they only transfer with a jpg number so you don't know what photos are what. When you have several thousand photos it is difficult to determined what is what.
Why does iPhoto have the ability to put photos in events and to give them descriptions if it doesn't transfer this info with the photo. I want to back my photos up to an external drive.

The simplest way to achieve what you want is to back up the iPhoto Library. That will get everything.
You sem to be exporting from iPhoto to the Finder. The Finder does not have the same organisation capabilities as iPhoto. If you're going to do that you need to understand some of the differences between the two.
Event Name will become Folder Name.
'Description Name' I guess is the Title you give the Photo
Jpeg Number is the File Name assigned by your camera.
So: File -> Export
Set your Kind to Jpeg
Select your preferred Quality
Check the Boxes at 'Titles and Descriptions' and Location Information
Under FIlename select 'Use Title'
Click on Export. In the Next Window choose a New Folder as your export destination and then Name that as you prefer
Regards
TD

After updating iPhoto to 9.2 Photoshop CS2 doesn't display the photo I have opened. The photo shows in the Navigator on the side panel, but not on the screen. MFF

After updating iPhoto to 9.2, Photoshop CS2 doesn't display the photo on the desktop screen, even though the image is shown in the Navigator pallet well to the right.

No, that is the problem. I don't see how it should be, but that is what happened after I did the upgrade, which was for iPhoto 9.2. The upgrade then required that the Library be upgraded. Then CS2 stopped showing the photo when I opened CS2. Maybe there was a system upgrade for the whole system, that went along with 9.2. Before the upgrade CS2 worked. I even tried photos that I had on backup disks, and they wouldn't show in CS2 even though I had draged them to the PS icon in the dock. These photos were not on my computer when the Library was upgraded. I even tried photos fresh from the camera. Elements 9 does work to open the photos.

Insert photos in a database and associate the photo to a person

I am creating a database that maintains a person's personal information,so i would like to know how to insert photos related to each person and associate the photo to the person and whenever i want to know about a particular person, it should display all his information along with the photo .and also I should be able to search a person by his photo .Please let me know ASAP.
Thank you

It is possible to store photo/image as blob field in the same table or a seperate table.
table EMP
empid (PK)
empname
dept
table EMP_PHOTO
empid (PK)
photo BLOB
and also I should be able to search a person by his photo Use Intermedia
http://www.psoug.org/reference/intermedia_a.html
http://www.psoug.org/reference/intermedia_v.html

How to get thumbnails to show as the photo instead of a folder with date shot?

How do I get thumbnails to show as the photo instead of as a little folder with the date shot on it?

You gave NO details whatsoever. No wonder your post has rewmained unanswered this long.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Regarding displaying the photo in wd abap from mime repository

Hi All,
I have to display the photos which are availaible in the mime repository.If any one knows about it then please tell me in detail i.e. step by step.
Thank you all in advance.

Create an Image element on you view and then go to the source property click on that and the n select the image from MIME.now the Image will be available on the view.
Thanks
Suman

IPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens. I want to at least access my photos and copy them to an external drive.

iPhoto opens but then the spinning rainbow wheel appears and I can't do anything. I have opend iPhoto with the Option key pressed and rebuilt the library and it still happens. I want to at least access my photos and copy them to an external drive. Anyone have ideas on how to get to them?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck.

When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck. I think I may have hit Upgrade the first time. I really need this to be fixed ASAP. Thanks for your help.

Assuming iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Get employee photo and display the photo in external system.

Similar Messages

Maybe you are looking for