Get error when connecting SQL 2012 Management studio to SQL Server 2012 database

I got this error message when I tried to connect to SQL Server 2012 using Management studio 2012.
Service 'Microsoft.SqlServer.Management.IRegistrationService' not found (Microsoft.SqlServer.Management.SDK.SqlStudio)

Did this get this resolved?
My SSMS 2012 was running without issue for several months until I installed VS2012. After the VS2012 I started getting "Service 'Microsoft.SqlServer.Management.IRegistrationService' not found" when connecting to database in SSMS 2012. I uninstalled VS2012
and SSMS 2012 started working again. Installed VS2012 and SSMS 2012 is broken again.
I tried the above suggestions without success. Here are the error details. Any help is greatly appreciated.
===================================
Service 'Microsoft.SqlServer.Management.IRegistrationService' not found (Microsoft.SqlServer.Management.SDK.SqlStudio)
Program Location:
   at Microsoft.SqlServer.Management.ServiceProvider.GetService[T](IServiceProvider serviceProvider, Boolean throwIfNotFound)
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.NavigationService.Initialize()
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.NavigationService.GetView(String urnPath)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.<GetColumnsFromNavigationService>d__11.MoveNext()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.AddFields(List`1 list, IEnumerable`1 fields, IDictionary`2 allValidFields, AddFieldsFlags flags)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.GetParentFields(INodeInformation source, Dictionary`2& allValidColumns)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItemWithQuery(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, String urnQuery, Boolean registerBuilder, Boolean registerBuiltItems)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItem(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequestChildren(IGetChildrenRequest request)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren(WaitHandle quitEvent)

Similar Messages

2032 error when connecting SQL server with Xcelsius

Hi,
Here are the short note about it
1)The dashboard is directly linked to database using aspx page
2)the data in the database refreshed using the aspx script.
3) we have a accordion menu and a 5 levels of filter and 10 charts
Problem Description
receiving 2032 error when the dashboard is kept idle for 5-10 min and if i select/change any option in the accordion menu or the filter i am receiving this error
Can anyone please help me out of this hell.

Itu2019s a security error message. Open your swf file and click with mouse right Button. Follow:
Settings/ Privacy/ Advanced/ Global Security Settings Panel/ Add Location.
Add your server address.
After select location, click u201CCloseu201D button and restart swf file.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

Not all car systems are compatible with the iPod touch. Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

An error when registering SQL server driver

Hi
I have got the following error when register SQL server drive
"RemoteMsDataBase.java": Error #: 302 : cannot access class com.microsoft.jdbc.sqlserver.SQLServerDriver; neither class nor source found for com.microsoft.jdbc.sqlserver.SQLServerDriver at line 19, column 63
the code that cause error
// register the SQL driver
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
// connect to the DB by using the driver.
String connString = "my_dbserver:1433;databasename=my_database";
String strDBConnect = "jdbc:microsoft:sqlserver://" + connString;
conn = DriverManager.getConnection(strDBConnect, userName, passwd);
To include jars to my classpath do this:
javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.java

javac -deprecation -classpath msbase.jar;msutil.jar;mssqlserver.jar *.javaSpecify the full path for jar(s), example,
javac -deprecation -classpath .;c:\myjars\msbase.jar;c:\myjars\msutil.jar;c:\myjars\mssqlserver.jar *.java
Hope it works.
Sudha

Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Using DI API, getting error when connecting to database:

The server is 2003. The sqlserver is 2005.
We have a button that calles the DIapi function Connect(). He gets the following error: [Microsoft][ODBC SQL Server Driver][SQL Server]Conversion failed when converting the nvarchar value 'N' to data type int.
We then tried to connect into another database in SAP we got the following error:
1).[Microsoft][ODBC SQL Server Driver][SQL Server]Conversion failed when converting the nvarchar value 'UDOXX_Contract to data type int.
There is a user-defined object called 'UDOXX_Contract', but our Add-On does not use any user-defined data object, so that must be from another add-on. I really dont know anything about these user-defined objects. Anyone have any idea what can be causing this problem, or what i can look at concerning this?
thanks
Bill

Hi Bill,
I am not sure why it is giving you the error messages and I have never seen these errors before. What you can possibly try is to see what SQL statements it is trying to execute. You can accomplish this with the SQL Profiler.
Are you sure you're connecting correctly? Please post your code for the connection here.
Hope it helps,
Adele

Problem when connecting sql server 2005 using SQL developer

Hi,
I installed Sql developer and I am trying to connect sql server 2005 using windows authentication. I had previously the SSO folder problem saying the path is missing in java.library.path. I copied the SSO folder into Sqldeveloper directory. I changed the settings under computer management->services and applications->sql server configuration manager->sql server 2005 network configuration ->protocols for sqlexpress->I enabled TCP/IP.
Now I am getting an error saying "Failure-can not open user default database.Login Failed. Login failed for user ...".
I am able to connect thru ODBC driver using windows authentication.
Any help on this is highly appreciated.
Thanks in advance,
Lakshmi

Hi Martin,
Your solution has solved my problem too. Thanks for posting these workaround fixes :-)
However, there seem to be a problem with datetime fields. The query:
select getdate()
returns something like: oracle.datetimestamp.@1aed4
Is there a way to get around with this? Otherwise, using SQL Developer as a client for SQL Server doesn't serve the right purpose when we cannot access simple date fields :-)

Error in connecting SQL Server ODBC connection to Oracle 8i

I am tried connecting Oracle 8i on Windows2000 to SQL Server on Windowns2000 using ODBC. Sitting on Oracle server, in datasource(ODBC) when i give SQL servername and userid and password and click next, it gives error:
connection failed
SQL Server Error:1326
ODBC SQL Server driver(Namespipe)
client unable to establish connection
can anyone help urgently?

<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by sanjayp patel ([email protected]):
I tried connecting Oracle 8i on Windows2000 to SQL Server on Windowns2000 using ODBC. Sitting on Oracle server, in datasource(ODBC) when i give SQL servername and userid and password and click next, it gives error:
connection failed
SQL Server Error:1326
ODBC SQL Server driver(Namespipe)
client unable to establish connection
can anyone help urgently?<HR></BLOCKQUOTE>
null

Getting error while expanding SQL Server 2012 agent.

Hi All,
Server Version Details: Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64)
   Oct 19 2012 13:38:57
   Copyright (c) Microsoft Corporation
   Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
We are using SQL Server 2012 in Active/Passive Cluster and the problem is getting below error while expanding SQL Agent. Please share you views on this. Thank You.
TITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
A severe error occurred on the current command. The results, if any, should be discarded. (Microsoft SQL Server, Error: 0)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=0&LinkId=20476
BUTTONS:
OK
Regards,
Kalyan
----Learners Curiosity Never Ends----

Hi OHM SAI RAM,
I’m writing to follow up with you on this post. Was the problem resolved after checking the error message and performing the action plan steps? I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings or
concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Getting Error when running sql from concurrent program in R12

Hi All,
I created concurrent program and attached EXECUTABLE which executable method as SQL plus .
Using this program I am running one SQL file in R12 when I am running I am getting below error .
Same king of program I have define in 11i and running it is running can anyone please help me if I need to do any set ups or security thing to resave this problem.
ERROR:
ORA-01017: invalid username/password; logon denied
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_identifier>] | /
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 3162719.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Regrds,
Sridhar.

user12000862 wrote:
Hi all,
Thanks a lot giving replay below simple code I have put in my SQL file for testing Eventhough it is giving error .
Table which i am using in Apps schema only.
declare
BEGIN
insert into BRCD_HZ_DNB_XTBL_TEST values (666,'Y','547','Y','12254','TESTING','N','Y');
commit;
END;
/Try this instead
WHENEVER SQLERROR EXIT FAILURE ROLLBACK;
WHENEVER OSERROR EXIT FAILURE ROLLBACK;
insert into BRCD_HZ_DNB_XTBL_TEST values (666,'Y','547','Y','12254','TESTING','N','Y');
commit;
exit;HTH
Srini

Get error when CONNECT BY PRIOR used by where

Hi
I get "No more data to read from socket" error when the result of CONNECT BY PRIOR used after where, is there anybody encounter this error?
example SQL:
select
from table_A
where exists
(select 1 from table_b
START WITH table_b.col1 = 'value'
CONNECT BY PRIOR table_b.col1 = table_b.col2)
The sql select 1 from table_b START WITH table_b.col1 = 'value' CONNECT BY PRIOR table_b.col1 = table_b.col2 can return 2 row correct, but the whole sql does not work.

Hi! Rahul,
Thank you for your reply first. Your method doesn't work in my case. Can you tell me the steps of creating a new layout for added records and draft documents. I have created a quotation layout which work with added records only, the steps has been show below and please comments, thanks.
1. In Crystal Report > new blank report > create new connection > Choose "SAP Business One" > Select OQUT under "B1 Tables".
2. Insert "CardName" field to report > Create DocKey@ parameter and set it equal to DocEntry in select expert record function
3. Click Add-ins > SAP Business One > Save > Choose company database and input manager password.
Regards,
Ivan

Getting error when connecting a third pary application to a server in my LAN

Hi
I am getting error
javax.microedition.io.ConnectionNotFoundException: Protocol not found: net.rim.device.cldc.io.http.Protocol
when trying to connect a third pary application from Blackberry to a server in my LAN

Hi Mudessir,
With the help of ABAP'er try the following.
1. open the program 'LCLSCF2G' from SE38.
2. Keep a break point at line no: 131.
There is 'END SELECT' statement which is getting failed at line no 131 in the program.
Try to analyse the SY-SUBRC at that point.
If your technical consultant can't solve this, write to SAP OSS (service.sap.com).
I have searched SAP OSS, there are other situations, but your case is not there. So write to SAP if technical consultant can't solve it by debugging the program.
Regards,
Madhu.

Wrong OS error when installing SQL Server 2012 Enterprise onto Lenovo Yoga ThinkPad Windows 8.1

This is the error message I receive; "SQL Server setup media does not support the language of the OS or does not
have the SQL Server-English language version installation files. Use the matching language-specific SQL Server
media, or install both the language specific MUI and change the format and system locales through the regional settings in the control
This is the error message I receive; "SQL Server setup media does not support the language of the OS or does not have the SQL Server-English
language version installation files. Use the matching language-specific SQL Server media, or install both the language specific MUI and change
the format and system <span style="color:#333333;font-family:'Segoe UI', Arial, sans-serif;font-siz

Hello,
Please go to Control Panel->Regional Setting and change the “Format” language to the same language of the setup media. After
that, re-run SQL Server setup program.
For more options/workarounds, please read the “Workaround” section on the following link:
https://connect.microsoft.com/SQLServer/feedback/details/556958/sql-server-setup-media-does-not-support-the-language-of-the-os
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Windows update quits working giving me access error when installing SQL Server 2014...

I am at my wits end. I've been developing on Windows for 20 years but have never run across something like this. On Windows 7 Pro I need to install the SQL Server 2014 demo (SQLServer2014-x64-ENU) with the SQL Server 2012 community data mgmt
package demo (SSDTBI_VS2012_x86_ENU) to develop my MSBI/SSIS skills. Somewhere along the line one of the prerequisite updates causes the Windows update process to quit working giving me and error code beginning with 8 (sorry didn't write it down, stupid)
that says I don't have permissions to update. Have not been able to isolate it farther than that. Have done all the fixes I've been able to find online and none of them have worked. For whatever reason, when I install the same thing under
VMware it's runs fine. I've had Microsoft log onto my machine and he told me I needed to buy a $99 piece of software to fix the problem. At this point I'm more than ready to do so.

I am at my wits end. I've been developing on Windows for 20 years but have never run across something like this. On Windows 7 Pro I need to install the SQL Server 2014 demo (SQLServer2014-x64-ENU) with the SQL Server 2012 community data
mgmt package demo (SSDTBI_VS2012_x86_ENU) to develop my MSBI/SSIS skills. Somewhere along the line one of the prerequisite updates causes the Windows update process to quit working giving me and error code beginning with 8 (sorry didn't write it down,
stupid) that says I don't have permissions to update. Have not been able to isolate it farther than that. Have done all the fixes I've been able to find online and none of them have worked. For whatever reason, when I install the same thing
under VMware it's runs fine. I've had Microsoft log onto my machine and he told me I needed to buy a $99 piece of software to fix the problem. At this point I'm more than ready to do so.
>> I've had Microsoft log onto my machine and he told me I needed to buy a $99 piece of software to fix the problem.
I do not understand and never seen a log that tell you what to buy or what it cost.
according to your explanation I would probably try to restore to point in time before the first installation which star the problem. If you do not have a backup then it is a great lesson for life :-)
In this case:
Please provide us more information from the log file during the installation that stopped + the errors that you get in current attempt to install.
C:\Program Files\Microsoft SQL Server\<folder name according your installation>\MSSQL\Log
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Winsock error when running SQL Server Stored Proc

I have a SQL Server stored procedure that is trying to read emails from an IMAP server (I am using mail.dll from www.limilabs.com).
The SP works fine on my local computer/db, and the code also runs fine when run from a console application on my remote server. When I try to run it from SQL Server however I get this error message:
Msg 6522, Level 16, State 1, Procedure GetEmails, Line 0A .NET Framework error occurred during execution of user-defined routine or aggregate "GetEmails": Limilabs.Client.ServerException: The requested name is valid, but no data of the requested type was found ---> System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was foundSystem.Net.Sockets.SocketException: at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.Dns.GetHostAddresses(String hostNameOrAddress) at System.Net.Sockets.Socket.Connect(String host, Int32 port) at Limilabs.Client.ClientBase.Connect(String host, Int32 port, Boolean useSSL)Limilabs.Client.ServerException: at Limilabs.Client.ClientBase.Connect(String host, Int32 port, Boolean useSSL) at StoredProcedures.GetEmails()
I suspect it is something to do with permissions (??) but it is beyond my knowledge of SQL Server. Anyone have some pointers? I am using the IP for the IMAP server, I have switched off the firewall.
Thanks

Reading emails in a stored procedure? Hm...
Unless you are impersonating the actual user in your CLR procedure, the access will be under the service account for SQL Server. If this is Local Servic or similar and may not have the permission or configuration to access whatever System.Net.Dns.InternalGetHostByName
is trying to access.
Try running SQL Server under a domain account to see what happens.
Erland Sommarskog, SQL Server MVP, [email protected]

Get error when connecting SQL 2012 Management studio to SQL Server 2012 database

Similar Messages

Maybe you are looking for