Get headline as data

Hello,
I have a problem with a script to set a variabel to info-object headline. I filled in the info-object headline with text and saved it.
The script gets an error "can't get headline of current document". I would appreciatie any help on this.
Many Thanks
David

David… Headline is a property of the documents info object and you need to address it as such… I don't know why you are coercing to 'real' that is for numeric values… use as 'text' or as 'string' instead… Particularly when passing to display dialog as it always want string/text… Anyhow' this works for me…
tell application "Adobe Photoshop CS2"
activate
tell current document
display dialog (headline of info as text)
end tell
end tell

Similar Messages

"get all new data request by request" after compressing source Cube

Hi
I need to transfer data from one Infocube to another and use the Delta request by request.
I have tried this when data on Source Infocube was not compressed and it worked.
Afterwards some requests were compressed and after that the delta request by request is transfering all the information to target Infocube in only one request.
Do you know if this a normal behavior?
Thanks in advance

Hi
The objective of compression is it will delete all the request in your F table and moves data to E table.after compression you don't have request by request by data.
This is the reason you are getting all the data in single request.
Get data request by request works, if you don't compress the data in your Cube.
If you want to know about compression, check the below one
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c035d300-b477-2d10-0c92-f858f7f1b575?QuickLink=index&overridelayout=true
Regards,
Venkatesh.

'Get All New Data Request by Request' option not working Between DSO n Cube

Hi BI's..
Could anyone please tell me why the option ' Get one Request only' and 'Get All New Data Request by Request' is not working in DTP between Standard DSO and InfoCube.
Scenario:
I have done the data load by Yearwise say FY 2000 to FY 2009 in Infopackage and load it to Write-optimised DSO (10 requests) and again load Request by request to Standard DSO and activate each request. I have selected the option in DTP's to 'Get All New Data Request by Request' and its working fine between WDSO and SDSO. But not working between Cube and SDSO. While Execute DTP its taking as a single request from SDSO to Cube.( 10 request to single request).
Regards,
Sari.

Hi,
How does your DTP setting looks like from below options ? It should be change log, assuming you are not deleting change log data.
Delta Init. Extraction from...
- Active Table (with archive)
- Active Table (without archive)
- Archive ( full extraction only)
- Change Log
Also if you want to enable deltas, please do not delete change log. That could create issue while further update from DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

Getting at POST data from a pl/sql procedure through Path Aliasing

Hi.
I have mod_plsql configured with "path alias" and "path alias procedure" so that the request ends up in my
procedure and i have the remaining path in p_path. This is what I want.
http://<domain>/<dad>/<myalias>/<p_path>
My question is; is there a way at this point to get at POST data in the request? I haven't been able to find
any way of doing this looking through the documentation. Is the body of the request lost at the gateway
(mod_plsql) using path alias?
If so, is there some other way to achieve something like !myproc(name_array [somearr], value_arr [somearr])
where the first entry in the arrays is an eqvivalent to p_path?

Billy Verreynne wrote:
Øyle wrote:
I have mod_plsql configured with "path alias" and "path alias procedure" so that the request ends up in my
procedure and i have the remaining path in p_path. This is what I want.
http://<domain>/<dad>/<myalias>/<p_path>
My question is; is there a way at this point to get at POST data in the request? Do not understand the question as a POST and GET are simply two different methods that a web browser submits a URL and data. There is no "+path+" involved here.Thank you for answering. I think the confusion is because you disregard what I said about "path alias" and "path alias procedure".
Those are configuration of the mod_plsql gateway so that any URI containing <myalias> above is directed to the procedure stated
by "path alias procedure". The gateway also sends any remaining parts of the URI to this procedure as an varchar2 argument (p_path).
My problem is that I see no way to get at any POST data as the signature of this procedure has to be this one varchar2, and I don't
know any other way to get at the body of the request.
>
If so, is there some other way to achieve something like !myproc(name_array [somearr], value_arr [somearr])
where the first entry in the arrays is an eqvivalent to p_path?If you want to know what the URL is, the full path used, then you need to look at the CGI (Command Gateway Interface) environment. The web server builds a list of CGI variables. These include the type of web server, the URL, the type of HTTP command (GET or POST), and so on.
Within your PL/SQL web procedure, you can query these CGI variables. Have a look at the function OWA_UTIL.GET_CGI_ENV in the [Oracle® Database PL/SQL Packages and Types Reference|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/w_util.htm#i997269] guide.
Take a look at CGI variables such as PATH_INFO, PATH_TRANSLATED, SCRIPT_NAME and so on.Yes, thank you, but my problem is a bit upside down. I do use the cgi environment to get the method and I have path as input, what I can't
find is the body of the request. I might be approaching this entirely the wrong way. It might be a bit easyer to understand if I state that I'm
trying to find a way to implement a RESTfull service in pl/sql.

How do I use Display Dialog to get back a date?

Can anyone tell me how to use Display Dialog to get back a date?
I am using the following code that does not work. It does not accept anything. And I have searched high and low for an answer to my question and found nothing.
repeat
       display dialog "When should I remind you (date)?" default answer ""
       try
             if the text returned of the result is not "" then
                    set the requested_text to the date returned of the result as date
                    exit repeat
            end if
       on error
           beep
end try
endrepeat
display dialog requested_text
The code is based on what I found in AppleScript 1-2-3 (page 300). It shows examples for getting text and numbers but not one for dates.
For what it is worth, my goal is to create a script that will convert an email from Evernote into an iCal Reminder. To do so, I want to ask the user (myself) for the reminder's date and time. I am assuming I need to ask for each separately. I also assume that once I get the date and time for the reminder, it should be relatively straightforward to 'make' a 'todo' with an alarm.
Thanks in advance.
-David

Hi David,
Try this:
repeat
    set theCurrentDate to current date
    display dialog "When should I remind you (date)?" default answer (date string of theCurrentDate & space & time string of theCurrentDate)
    set theText to text returned of result
    try
        if theText is not "" then
            set theDate to date theText -- a date object
            exit repeat
        end if
    on error
        beep
    end try
end repeat
display dialog (date string of theDate & space & time string of theDate)
You might also have a look at this page of the AppleScript Language Guide.
Message was edited by: Pierre L.

Not able to get the Qualification data from BAPI

Hi all,
I am using a BAPI (BAPI_JOBREQUIRE_GETLIST) to get the qualifiaction data for requirement profile. It's working fine earlier but I did not get the qualification data from this BAPI, although the data is there in DB against this requirement profile.
Can someone suggest me why I am getting this issue. I have looked into SDN and in BAPI documentation and found as below:
"You require authorization (structural authorization) to read the Requirements subprofile."
I am having the same User ID as I had before (when I getting back the correct data), so I don't think it should be authorization issue.
Can someone help me out in this issue please.
Thanks,
Sanket Sethi

Hi Shiva,
It does not going to these includes at all. Message comes out with successfully done. The BApi is calling RHPP_COMMON_QUALI_READ inside, but this will not return any data. But if will call any qualification object ID, this BAPI will come up with data.
So the QP type LO profile will not come up with any kind of data, but if we pass the OTYPE as Q and pass any Qualification object ID then the data will be returned.
Is there any relationship or some other thing is missing? Any idea.
Thanks,
Sanket Sethi

How can i get the meta data from database?

Hi, all java and db experts,
I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
Please help, thanks a lot.
Hanna

if i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
Is it feasible?
DatabaseMetaData dbmd = conn.getMetaData();
ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
while (rs.next()) {
String colName = rs.getString(4);
int colType = rs.getInt(5);
int colDataType = rs.getInt(6);
int colPrecision = rs.getInt(8);
int colLen = rs.getInt(9);
int colScale = rs.getInt(10);
long defaultValue = rs.getLong(11);
But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor?

How can I get the image data from Clipboard with LV

Anybody knows How can get the image data after pressd "print screen button" with LV?
I want to program a software which can save a image as a bmp or jpeg etc, and the image data is from pressed print screen button.
How to get it out from clipboard. I am trapping about. thanks in advance.
Try to make everything Automatic

You can have a look at Rolf Kalbermatter's post here (give him stars) or, if you're using scripting, you can use the Application class Get Clipboard Image method.
Try to take over the world!

How long does it really take to get my unlimited data plan back?

So Wednesday morning I go into a local Verizon owned-and-operated store to buy a Galaxy S5 on installment plan, like I did for my GS4 a year ago. Get talked into an Edge phone plan and the More plan, and they get that unlimited data plan off my line as fast as possible and then find that I can't get Edge for another 3 weeks. So we revert the changes (in theory), less than half an hour after the original change.
So I'm just standing there reading twitter and waiting for them to fix the situation and get me back to where I was when I walked in. I was actually willing to go ahead and buy a GS5 on installment plan (as I'd wanted to when I came in), but they *really* did not want me to do that. They got the voice plan back, and put me on a 2GB plan (which is 1/3 of my average usage), telling me I'd be back on my unlimited plan with hotspot service "by the end of the business week."
Today as I'm checking at the end of the business week, no sign of my data plan or hotspot service. The folks on the social media team tell me that my service might be crippled for another 10 days while an offline team tries to fix what the folks in the store broke.
Am I really out of luck for two weeks? I got a GS5 on T-Mobile with 5GB of data, which will get me by... TMO didn't seem offended that I wanted a GS5. But if I have to "be careful" with my data (as the store manager put it) on Verizon for two weeks, I may as well forward the phone and power it off.
At least I know never to set foot in this particular Verizon store again... last year they wouldn't sell me a GS4 "in case someone came in and wanted to upgrade" so I went to another nearby location. If my plans get unbroken, I'll either go to that other location or check eBay for my GS5.

Think of this and be amazed. If Verizon is trying its best to get customers off unlimited data by any means possible, and quite frankly tell you once you purchase any device on subsidy or the Edge program you lose unlimited. Now the Worry Free Guarantee states within 14 days if you change your mind you can pay a $35 restocking fee, and go back to your old plan.
However they no longer offer unlimited data so they give you this line of it has to be set back manually (inactive price request) and then it gets denied. Then they say it has to be submitted again for approval and then it gets denied. So why have a worry free guarantee?
And think to yourself, a plan they can remove in minutes takes them weeks to give back? They don't give it back. Search the forum.
Good Luck

How to Get the Current data into Planning Layout from the Planning cube

Hi,
I have a problem in BPS.   I am selecting the data from cube based on Month org details but I want to see the latest data.   How can i get this data into planning cube.
Like
data
Tran           cal month            org               amt
1                 jan                        a                  100
1                 feb                        a                   200
if i want to read based on Tran org as input values I shoud get the below data but I am getting the previous data.
Tran           cal month            org               amt
1                 feb                        a                   200
Kindly help me in this regard
Thanks
Naveen

Naveen,
    Are yo having issue when you save something in the layout, the data doesn't appear in the listcube ? Or do you have issue that the latest data you see in the cube doesn't appear in the layout ?
For the former issue, please look at your selections of listcube and for the second issue, please check your planning level definition, make sure all the restrictions you have applied are valid for this latest data to be presented in the layout.
Hope this helps.
Cheers
Srini

How to get the actual data in ALV report

I am doing some upgradation work in that i am using Submit & And return and also i am using some function modules like LIST FROM MEMORY , LIST TO TXT wnd WRITE LIST , it gives output in normal list format , But i need to print in ALV report .
With the use of set table for 1st display i got the ALV report but not with actual data, (some junk value is showing) , So can any 1 suggest me how to get the actual data in ALV report, With the use of Any Function Module or with Coding,
with regards,

Hi Saravana
I am sure you must be getting the values in tables of table parameters from every FM.
consolidate the values from tables of all FMs in one table and built ALV for that table only.
I hope this way you can show the actual data in ALV.
thanks
Lalit

I'm getting a "No Data From Device" error for older video import

I'm trying to create digital video archives of some older (Hi-8) tapes before they turn to dust. I've got a Sony deck with iLink and have been using iMovie, which is time consuming but error free. I want to use the "Create Camera Archives" feature in FCP X, but am not able to import any video. FCP recognizes the deck, lets me control it and displays video in the capture window. But it does not capture anything - camera archives are empty and when I try to import the video I get a "No Data from Device" message over the import window, as the video is playing in the background. I thought it might be an issue of import settings... but I can't find any to change.
Any advice appreciated. Thanks.

Make sure all your settings are correct for capture and playback. Also make sure that the settings on the deck are the same as well. I know I had an issue when my Sony FX1 HDV camera was set to DV, FCP gave a similar error message.

How to get the Delivery date in PO line Item in SAPScript

Hi Gurus,
I am working on PO Script (MEDRUCK). I copied the Standard to a Z form. ZMM_MEDRUCK, Now I need to print the the Header text at the end of MAIN window. I put Iem number along with the other line Item informmation like stanadrd PO Script MEDRUCK. I also want to show the delivey date with line Item, so Itried to use EKET-EINDT but it is returning the delivery date of last line item, means while printing the first line and other information it is showing the delivery date of the last line item, I tried with the PEKPO-EINDT it is also not working.
Can any body suggest me how i can get the delivery date for the respective line Item ?
Regards
Sony

actually your are picking up the correct data from Table EKET (EKET-EINDT) but your are printing that in item data loop for EKET might have already executed in your script and the header of that internal table consist the last entry of the table so for that. Fetch the delivery date explicite from the Table EKET when your in item level processing and print that.
For Example u can use this code.
To print you have write the this code in Script item level printing window "MAIN" window
Following perform is called to get the line item delivery date in PO
{/: PERFORM GET_DEL_DATE IN PROGRAM ZPerform_prog
/: USING &EKPO-EBELN&
/: USING &EKPO-EBELP&
/: CHANGING &DEL_DATE&
/: ENDPERFORM}
{* Dellivery date &DEL_DATE& }
write the below code in the Z program "ZPerform_prog"
{ FORM get_del_date TABLES in_par STRUCTURE itcsy
                         out_par STRUCTURE itcsy.
READ TABLE in_par WITH KEY 'EKPO-EBELN'.
CHECK sy-subrc = 0.
$_po_no = in_par-value.
READ TABLE in_par WITH KEY 'EKPO-EBELP'.
CHECK sy-subrc = 0.
$_po_line = in_par-value.
SELECT *
FROM eket UP TO 1 ROWS WHERE ebeln EQ $_po_no AND ebelp EQ $_po_line.
    $_del_date = eket-eindt.
    CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
      EXPORTING
        date_internal            = eket-eindt
      IMPORTING
        date_external            = $_del_date
      EXCEPTIONS
        date_internal_is_invalid = 1
        OTHERS                   = 2.
    READ TABLE out_par WITH KEY 'DEL_DATE'.
    CHECK sy-subrc EQ 0.
    out_par-value = $_del_date.
    MODIFY out_par
                INDEX sy-tabix.
    CLEAR : $_po_no , $_po_line ,$_del_date.
ENDSELECT.
ENDFORM.                    "GET_DEL_DATE }

Got locked out of iPhone 4 my only option was to upgrade so I got iphone 5s but when I restore from backup that's recent from iCloud I don't get my game data and app data how do I get all my data back for games and apps?

I still have old phone is there a way to bypass 4 digit code my kid created it and locked me out but it's disabled says connect to iTunes but no access to computer just wifi. I have all my data still on it there's gotta be a way to over ride it or something far situations like this cause someone said iCloud don't save everything like app info just basic app info PLEASE IF ANYONE CAN HELP OUT???
I'd like my phone to have all data it had when I backed up to iCloud bought extra space and everything and still didn't get all my data from other phone and I made sure everything was checked on to be backed up

Thanks so much Meg. Unfortunately, iTunes is the program I use to perform syncing. I don't really have other outside options. It is also the location of the backup I would use to restore my phone, and my only way to reclaim important data. I am concerned that, since the last backup occurred when the "other" bar was only moderately huge (around 29G I think), that a backup would replicate the problem back onto my phone.
My contacts, etc. are all in address book and the calendar app on my Mac. As far as I know, iTunes is the way to get them back, but iTunes is where the problem is.
Any thoughts on this?

Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

Place the device in DFU mode (google it) and restore as new.

Get headline as data

Similar Messages

Maybe you are looking for