Get Information about the 'Suchauftrag' in the Cluster Table PCL_RCF

With a trace (st01) I found out, that the information of my 'Suchauftrag' is saved in the cluster Table 'PCL_RCF'. How can I read out this information in cleartext?
Thx for answers

Hello,
Check methods of class CL_HRRCF_INFOTYPE_LOG and see if they can meet the requirements you might have.
Best Regards,

Similar Messages

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
we have developed an application using oracle forms 10g with
oracle database 10g and Application server 10g
Application uses a single Oracle User name to connect to database
where as at Application level there are different users (these are not database users)
Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
USERENV('TERMINAL')
we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
thanks
Chaand Kackria

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

How to get information about the modules used in the RT system from host pc.

hi all,
i am trying to read the modules of the RT tragets from my host pc without deploying the program.
i have 2 or more than 2 rt systems from which i am trying to get the information about the modules used in that particular system.
Regards,
Santhosh M

hi, you can use the sys_context function, like this:
select sys_context('userenv','current_user'),
     sys_context('userenv','os_user'),
     sys_context('userenv','host'),
     sys_context('userenv','ip_address'),
     sys_context('userenv','instance'),
     sys_context('userenv','sessionid'),
     sys_context('userenv','terminal')
from dual;
Is this what you 're looking for?

Getting information about the last opened document?

Hi there!
I've got a question about the reader and it's opened documents: Is there any possibility to get any information about a document, that was already opened by the Adobe reader?
Example: I open xyz.pdf, and after closing the reader, i want to check what the last page was, the user looked at. Or the time, when this document was closed.
thanks
Daniel

Try something like this:
Font font = UIManager.getFont("Button.font");hope this helps!

Get information about the state of a row on a document

Hi all,
On our documents we have a button that does some calculation on quantity and price according to business logic.
When you run this code when a line is closed, the code of course crashes since the value cannot be set in that row.
Now I would like to build a check to see if the row is editable or if it's closed already. When I do
bool rowIsEditable = oMatrix.CommonSetting.GetCellEditable(rowNumber,3); //3 = itemcode column
{/code}
I always get true, even if the row is closed and thus the cell is not editable. What am I doing wrong or how can I check to see if I'm able to change the content of the cell?
Thanks!

Hello
Yes, because You checking the editable flag in the specific column, which is true (you can edit).
You may check the row status instead of column settings.
Regards
János

Can someone tell me where to get information about the search function in Swift

I need to put a search function into an app I am building and I have no idea where to look for information as to code, where to put the code and the text that it is going to search ( a book's worth) where do I put that file. Any help would be great. Thank you in advance.

Dipak,
Two things to try:
1. Check the Oracle8i EJB and CORBA Developer's Guide. It is available online from OTN in the documentation area.
2. Posting your note to the Oracle8i JVM technical discussion forum.

Is there any chance to get information about the next safari releases in year 2014?

hey there,
can you help me with this? Thanks guys

As per the Apple Support Communities Terms of Use
Submissions
Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products.
Discussions of Apple policies or procedures or speculation on Apple decisions.
No one here can speak for what Apple may be planning to do.

Gettting information about the processInstance from BPMObject

To have our businesslogic manageable, we decided to make use of BPMObjects to more clearly define separation of concerns. However, we still need to be able to access information about the processInstance from the BPMObject. I am able to get information about the activity that invoked the bpmObject, and i am also able to get hold of the process id and name. But I havent been successful in getting the actual instanceId.
I tried Fuego.Lib.ProcessInstance.id.id, but that will only work from an activity, not a BPMObject.
BR
Peter Elfström

To have our businesslogic manageable, we decided to make use of BPMObjects to more clearly define separation of concerns. However, we still need to be able to access information about the processInstance from the BPMObject. I am able to get information about the activity that invoked the bpmObject, and i am also able to get hold of the process id and name. But I havent been successful in getting the actual instanceId.
I tried Fuego.Lib.ProcessInstance.id.id, but that will only work from an activity, not a BPMObject.
BR
Peter Elfström

How can I obtain information about the recently finished commands?

How can I get information about the recently finished jobs / bash commands? (eg. date / time of termination)

$ e echo foo
foo
$ type e
e is a function
e ()
$@ && echo $@ - $(date) >> test.txt
$ cat test.txt
echo foo - Wed Jan 1 12:10:54 CET 2014
$ e echo bar
bar
$ cat test.txt
echo foo - Wed Jan 1 12:10:54 CET 2014
echo bar - Wed Jan 1 12:11:09 CET 2014
$ e htop
<here I do something with htop for a little while>
$ cat test.txt
echo foo - Wed Jan 1 12:10:54 CET 2014
echo bar - Wed Jan 1 12:11:09 CET 2014
htop - Wed Jan 1 12:15:14 CET 2014
Last edited by karol (2014-01-01 11:20:36)

Can I get information about client DNS from GSS?

Can I get information about the client's DNS request and which Data Center was choosed for this request? How long these informations are stored in GSS? Can I change this settings?
Thank you.

Following link will give you good start
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns378/c649/cdccont_0900aecd80122a78.pdf
Its a two year old document but gives a good overview.
For details visit
http://www.cisco.com/en/US/products/hw/contnetw/ps4162/tsd_products_support_configure.html
Syed

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?

Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help :)

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help

You can reduce the size to normal, which is about 1GB, by restoring the phone.
Backing Up, updating, and restoring your iPhone and iPod touch software
The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes.

N96 Error Cannot get enough information about the ...

I am getting error
"Error Cannot get enough information about the phone[3]
"Unspecified error [1]"
i downloaded the http://static.s2g.gate5.de/nokiamaps-client/nokia_ maps_3.01_09wk44_b01_s60_3.1_lm_rom.sis , but i am getting no signal and i cant sync my favorites...
anyone?

problem solve..check this link!!!
/t5/Maps-Navigation-and-GPS/E75-Maps-Updater-Error-Cannot-get-enough-information-about/m-p/673980

Where can i get any information about the application of labview on remote control??

Where can i get any information about the application of labview on remote control??for example using labview to build a virtual laboratory.

This is a big question. Contact me directly and we can discuss in detail what you are trying to accomplish.
Mike...
[email protected]
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Get Information about the 'Suchauftrag' in the Cluster Table PCL_RCF

Similar Messages

Maybe you are looking for