Get latepernr and get pernr
Hi all,
can u explain the get event functionality ?
Can u tell me the difference between
get pernr and get late pernr.
when should i use these type of statements ?
Regards
charan
Hi Ravi,
GET PERNR event initiates the data extraction for a pernr.
GTE PERNR LATE event is triggered after all the other events are triggered and right before the end-of-selection.
PL take a look at the following <a href="http://help.sap.com/saphelp_47x200/helpdata/en/ac/764da4496f11d3967200a0c9306433/frameset.htm">SAP Help</a> where it is explained very clearly.
Regards,
Suresh Datti
Similar Messages
-
I am new to ABAP-HR.......
what is the difference between GET OBJEC and GET PERNR.
Iam asked to write a program using logical databases .. which one should I use ...
thanks,
shekhar....Hi Nevali.
I would like to suggest,
OBJEC - Work Area for Database PCH
PERNR - HR Master Data Reporting - PNP
Differences,
GET OBJEC - Reporting on Personnel Planning data
GET PERNR - Reporting on HR master data.
I would like to suggest a Reference,
[SAP HELP - Standard Reference for HR Logical Databases|http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/content.htm]
Hope that's usefull.
Good Luck & Regards.
Harsh Dave -
Hi all,
I wish some information about use of get response and get status commands or where I can find answer to my questions.Hi, GET STATUS command description can be found in GlobalPlatform 2.1.1 specification and ISO/IEC 7816-4 standard.
GET RESPONSE is described in ISO/IEC 7816-4 and 7816-3 standards.
Best regards,
Eve -
Get-ADReplicationFailure and Get-ADReplicationUpToDatenessVectorTable
Hi,
Where does the Get-ADReplicationFailure and Get-ADReplicationUpToDatenessVectorTable cmdlets retrieve it`s data from?
Lets start with Get-ADReplicationFailure: It shows 2 replication failures which is not current. Running the following in the same environment shows no errors:
$dclist= get-addomaincontroller-filter *
foreach($dc in$dclist) {
repadmin /showrepl /csv | ConvertFrom-Csv
Get-ADReplicationUpToDatenessVectorTable: This cmdlet returns a lot of Microsoft.ActiveDirectory.Management.ADReplicationUpToDatenessVectorTable objects. Many of them have old timestamps and
no value for the Partner property:
LastReplicationSuccess : 26.04.2010 21:01:02
Partition : DC=domain,DC=local
PartitionGuid : 7ddec540-31db-44d3-9ab5-d5adb479627e
Partner :
PartnerInvocationId : 0e2fbc85-8d50-4c30-ae65-27648a0888b9
Server : dc01.domain.local
UsnFilter : 19853
These are probably old domain controllers which is decomissioned years ago. Why does these show up? And where is the cmdlet getting this data from?
The replication topology seems healthy using the legacy tools, but the new cmdlets isn`t giving the same impression.
Some clarifications would be appreciated.Hi scripter42,
The Get-ADReplicationFailure cmdlet returns all failures currently associated with a given domain controller or Active Directory Lightweight Directory Services (AD LDS) instance. The return object is of type ADReplicationFailure. This cmdlet returns the
list of failures in the ADReplicationSummary object for a specific server.
The ADReplicationUpToDatenessVectorTable displays the highest Update Sequence Number (USN) for the specified domain controller(s). This information shows how up-to-date a replica is with its replication partners.
Regards,
Lany Zhang -
Demantra 7.3 ,Analytical Engine Is not getting up and getting terminated
Hi,
When i am trying to make my Demantra 7.3 - analytical engine up on linux server, is not getting up and getting terminated. Can any body help me in the same.
For your information
Mine Weblogic server is 32 bit and linux operating system is 64 Bit.
Thanks in advance.
Thanks,
Ankur Dawra
Edited by: Ankur Dawra on Aug 16, 2010 2:52 PMIf that specific patch is causing a conflict with CU7 or Rules Engine Update Service, the best option would be to LOG a case with Microsoft and let them either fix it or provide a justification of why that specific Windows Patch is not a good idea (file
an exemption in case of later with the customer/security team).
Regards. -
MAC MINI (Mid 2011)
OSX Yosemite 10.10.2 / OSX Mavericks 10.9.5
While I were using mac mini for a while, the external display (LG_22MP55) has been getting dark and getting back to normal.
Did it enter into idle mode?
Anywhere I can find, can't find the related options to turn it off or adjust it.
Even adjusting "Never" for both "computer sleep" and "display sleep" can happen this annoying situation.
Beside, I have tried to connect iphone5S to external display (LG_22MP55) and double check LD will not enter into idle mode itself.
So, I guess this situation was happened by MAC mini.When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
GET PAYROLL And GET PERNR Events .. Query
Hi All
I have used Get Payroll Event to fetch data from Database for Payroll Reporting.
It work fine for me till now..
But i am not sure that ,it can be used indiviusally without GET PERNR Event.
And wht are the other conditions to be usedd in Get Payroll Event...
Regards
LakhanPernr Is the personnel numbers
for a particular Country
Country you can use MOLGA
GET PERNR
GETPAYROLL
You can loop and get the resuults for the Employee for that particulat Country
Ok
Take Care -
How to pipe Get-MailboxStatistics and Get-Mailbox
HI,
I have two commands but i need following information in one report.
Ex:
Name
ForwardingAddress
DeliverToMailboxAndForward
Get-Mailbox -Filter {ForwardingAddress -ne $null} | ft Name,ForwardingAddress,DeliverToMailboxAndForward -Autosize
How do i get that lastlogontime to above by conbine following command
get-mailboxstatistics
select-object
Lastlogontime,
AsHi ,
Try this :
Get-Mailbox -resultsize unlimited |where{$_.forwardingAddress -ne $null} |ft name,forwardingAddress,DeliverToMailboxAndForward
for get-mailboxStatistics ,first check the all object member and properties of by using below
Get-mailboxstatistics <anymailboxName>|get-member
if you see the ,ForwardingAddress,DeliverToMailboxAndForward properties , then you can pipe these two with Get-mailboxstatistics .
If so ,
Get-Mailbox -resultsize unlimited |where{$_.forwardingAddress -ne $null} |get-MailboxStatistics |ft name,forwardingAddress,DeliverToMailboxAndForward,lastlogontime
if not ,
You can't pipe these two with Get-mailboxstatistics along with lastlogontime.
Then ,
you have to use get-mailboxStatistics -resultsize unlimited|ft name,lastlogontime
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
PO is getting created and getting an error in the Message tab ME23N
HI everybody,
I am uploading the data and creating the PO through BAPI, and the PO is getting created. when i logged into ME23N and checking the PO it is everything fine without any error.
But when i click on the message button and checking the display PO output is giving an error message over as Incorrectly processed and when i check the processing log i am seeing the msg text as error in the address output.
and i checked the NACE transaction the output type is configured with program name, form routine name, form name and smartform name.
here in the form name and the smartform name which is present is having the different name and both are the smartforms only.
Can any one help me out in this issue how to resolve the error.
Thanks in advanceHi,
Check the TNAPR Table by putting the Form Name / Program Name to find out the output type it is attached to.
Debug
The other method of checking is by setting up a break-point at smartform and manually entering a PO using the same upload data and try to save it. But this would not help you much. Because the root cause is the Determination of output type.
Thanks & Regards
Suresh Nair -
Get-ADUser and Get-ADPrincipalGroupMembership combined
I'm trying to get a list of template user account and what their membership are exported to a csv file. I'm trying to combine the tables on them but having a hard time figuring it out. I spent the day racking my brain on this and figured I would reach out
for help. This gets all my template users.
Import-Module ActiveDirectory
$User = "*Template*"
$usernames = (Get-ADUser -Filter "DisplayName -like '*$User*'" -Properties * | format-table Displayname, SamAccountName)
$usernames
I can use this to get all the members of the groups, but since the groups repeat it doesnt break down where one user stops and the others begin.
$groups = Get-ADUser -Filter "SamAccountName -like '*$Usr*'" -Properties DisplayName | foreach-object{Get-ADPrincipalGroupMembership -Identity $_.SamAccountName} | format-table name
I was thinking of joining the tables but that wasnt much help to me since I cant figure out what to join on. I also thought about looping through the first table with a foreach loop but it was assigning the whole table in the first pass and displaying nothing.
If anyone could help or suggest something, I would greatly appreciate.
MattHi Matt,
Give this a shot:
Get-ADUser -Filter "DisplayName -like '*Template*'" -Properties MemberOf | ForEach {
$username = $_.SamAccountName
$_.MemberOf | ForEach {
$props = @{
Username = $username
GroupName = (Get-ADGroup $_).Name
New-Object PsObject -Property $props
} | Sort Username,GroupName |
Select Username,GroupName |
Export-Csv .\GroupMemberships.csv -NoTypeInformation
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing) -
Get a report joining data from Get-MailBox and Get-MailBoxStatistics
Hi
I have 2 cmdlets, and every has different information of the same users, the point is that I have to get the information of every cmdlet and in excel I have to join the information
Is there a way to get both information joined in one shot?
This is one cmdlet:
Get-Mailbox -Server MB05 | Select-Object DisplayName,SamAccountName,UserPrincipalName,UseDatabaseRetentionDefaults,OrganizationalUnit,PrimarySmtpAddress,WhenCreated,WhenChanged,HiddenFromAddressListsEnabled,@{N="AddressListMembership";E={
$_.AddressListMembership -JOIN ';'}},UseDatabaseQuotaDefaults,ForwardingAddress,DeliverToMailboxAndForward,RecipientLimits,ManagedFolderMailboxPolicy,@{N="GrantSendOnBehalfTo";E={ $_.GrantSendOnBehalfTo -JOIN ';'}},MaxSendSize,MaxReceiveSize,Database
| Export-CSV -Path d:\ms\mb05.txt -Delimiter "`t" -Encoding Unicode -NoTypeInformation
This is the other cmdlet:
Get-MailboxStatistics Server MB05| Select-Object DisplayName,Database,StorageLimitStatus,@{label="Total Size (MB)";expression={$_.TotalItemSize.Value.ToMB()}},@{label="Total Delete (MB)";expression={$_.TotalDeletedItemSize.Value.ToMB()}},
ItemCount,DeletedItemCount,LastLogoffTime,@{label="ProhibitSendQ (MB)";expression={$PSQ}}| Export-CSV -Path d:\ms\ms05a.txt -Delimiter "`t" -Encoding Unicode -NoTypeInformation
Thank you in advanced.
Doc MXI think something like this would work:
$stuff = @()
Get-Mailbox -ResultSize unlimited -Database MB05| foreach{
$x = "" | select `
DisplayName, `
SamAccountName, `
UserPrincipalName, `
UseDatabaseRetentionDefaults, `
OrganizationalUnit, `
PrimarySmtpAddress, `
WhenCreated, `
WhenChanged, `
HiddenFromAddressListsEnabled, `
AddressListMembership, `
UseDatabaseQuotaDefaults,
ForwardingAddress, `
DeliverToMailboxAndForward, `
RecipientLimits, `
ManagedFolderMailboxPolicy, `
GrantSendOnBehalfTo, `
MaxSendSize, `
MaxReceiveSize, `
Database, `
StorageLimitStatus, `
'Total Size (MB)', `
'Total Delete (MB)', `
ItemCount, `
DeletedItemCount, `
LastLogoffTime, `
'ProhibitSendQ (MB)'
$m = Get-Mailbox $_
$x.DisplayName = $m.Displayname,
$x.SamAccountName = $m.SamAccountName,
etc.,
etc.,
etc.
$m = Get-MailboxStatistics $_
$x.StorageLimitStatus = $m.StorageLimitStatus,
$x.'Total Size (MB)' = $m.TotalItemSize.Value.ToMB(),
etc.,
etc.,
etc.
$stuff += $x
$stuff | export-csv -Path d:\ms\mb05.txt -Delimiter "`t" -Encoding Unicode -NoTypeInformation
--- Rich Matheisen MCSE&I, Exchange MVP -
Pipeline get-mailbox and get-mailboxstatistics
Dears,
I am finding great difficulty in having output what seems to be a quite simple...
I just need to output all user's mailbox prohibitsendquota and the totalitemsize and I am running the below command but it is giving me null values in totalitemsize,
Get-Mailbox -ResultSize Unlimited | Select-Object DisplayName, ProhibitSendQuota, @{label="TotalItemSize";expression={(Get-MailboxStatistics $_name).TotalItemSize}}
However, when I make get-mailbox -identity
[email protected] it gives me the correct output...I need to run it for everyone.
MCP,MCTS(Vista),MCSA(Messaging).. i noticed that too, but chaning $_name to $_.name still doesnt work - it gives me totalitemsize only on the last subject
However, i have a script i use (not one-liner though) - giving me way more information
$mailboxes = get-mailbox -database $(read-host "enter database") |select -first 10 | select name,alias,database
$Mycol = @()
foreach ($mbx in $mailboxes)
$mbxstat = get-mailboxstatistics $mbx.name |select lastlogontime,lastloggedonuseraccount,totalitemsize,itemcount
$user = get-aduser $mbx.name -properties enabled,lastlogondate
$MyObject = New-Object PSObject -Property @{
mbxName = $mbx.name
mbxAlias = $mbx.alias
mbxDatabase = $mbx.database
ADuser = $user.enabled
ADuserLogon = $user.lastlogondate
mbxLastlogon = $mbxstat.lastlogontime
mbxLastAccount = $mbxstat.lastloggedonuseraccount
mbxItemSize = $mbxstat.totalitemsize
mbxCount = $mbxstat.itemcount
$Mycol += $MyObject
$Mycol |select mbxname,mbxalias,mbxdatabase,aduser,aduserlogon,mbxlastlogon,mbxlastaccount,mbxitemsize,mbxcount #|export-csv report.csv -Delimiter ";"
just delete rows u dont need -
I am the administrator on this desktop but forgot my password. I need accss. Hpow can I gain acceess and reset my password without rebooting and losing current info?
Hi,
Try the following.
Using another PC, download the application on the following link and save it to your Downloads folder.
PC Login Now
When the download has completed, open your Downloads folder and double-click the installer - this will result in another file appearing which is the disc image ( .ISO ) that you need to burn to a blank CD.
You will now need to use an application such as ImgBurn to burn this ISO correctly to a blank CD - a guide on using ImgBurn to write an ISO to a disc is Here.
When the disc has been created, shutdown the PC you can't log-in on, tap away at the esc key as soon as you press the power button to access the Start-up Menu, insert the CD, select Boot Options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter - you may also have to 'Press any key' to boot from the CD if asked.
Follow the instructions on the guide Here to remove the current password.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
PNPCE Questions Regarding GET PERSON and GET PERAS
Any information regarding the runtime performance of PNPCE? It seems it takes a lot more time than PNP? Any suggestions how to improve performance while using PNPCE?
Message was edited by:
Shuvo DattaShuvo,
I found this on SE36, documentation on PNPCE logical database:
"<u>Selection Fields of the 0000 and 0001 Infotypes</u>
<i>You can use all the standard fields of the 0000 and 0001 infotypes for selection. You can also use additional selection fields that are the concatenation of two or more of these infotype fields. If possible, do not use these concatenated fields because they do not play a significant role in the selection and can lead to long runtimes in certain circumstances. You can show and hide the required selection fields using the Selection Fields function in the application toolbar. The report
category defines a preselection of fields that should be available."</i>
Also, I suggest you read the full doco in SE36 to use this LDB in a more efficient way as far as the performance is concerned.
Hope this helps.
Reward points if useful.
Cheers,
Sougata. -
hello All,
I have an application that runs on Tomcat over HTTP or HTTPS, and it could be using any port for either protocol. I need to figure out in my servlets what protocol/port that request came from.. any insights? I am using JDK 1.3.1/J2SDKEE1.3 and upgrading for right now is not an option. Any help will be appreciate it.
Thanks,
P.. I guess I found what I need
request.isSecure() determines whether this request was made using a secure channel and
request.getServerPort() .. gives the port number.
Maybe you are looking for
-
Right way to use Web Apps on iPhone?
I'm not sure I'm doing right way using Web Apps on my iPhone. Mostly I find the necessary Web Apps. on my Mac. And type the url address on iPhone. Then, if there is "view Web Apps" icon under the description of the Web apps, click to go and add it to
-
Why are my mp3's and m4a files no longer recognized?
All of a sudden, 95% of the 10,000 music tracks in my iTunes Library has become unplayable. It concerns mp3 and m4a files with music that I purchased and ripped over the years. Wifi syncing to my iPhone 4s made it worse: now the Music app on my iPhon
-
HP 8500 Wireless printer will not install - HELP!
I am using a new i7 MacBook Pro with boot camp running Windows 7 Professional 64bit with 8mb RAM. When trying to install my new HP8500 Wireless printer I get this error message: "Problem with the driver for Intel 5 Series/3400 series chipset family U
-
Problem Navigating Tabs in Safari
When I use the Shift+Command+Arrow (L or R) shortcut I can navigate thru my tabs with ease. Sweet. But if one of those Web pages has a search box the cursor automatically appears in the box on that page and I can no longer navigate to the next tab. O
-
Apple System Prefs, Many utilities, Insallers won't launch!!!!
Hey all, I have reset the pram, ran cocktail, used disk utility, repaired permissions... apple system preferences hangs upon launch. installers do the same. utilities like address book, stuffit, won't even spark. anybody have a tip to help me out of