Get-MailboxFolderStatistics for mailbox with items larger than 25MB

Hi all,
try to get mailboxfolderstatistic for all mailboxes that contains items larger than 25 MB With the following command:
Get-mailbox -Resultsize Unlimited | get-mailboxfolderstatistics -includeanalysis -FolderScope All
 {Size -gt '25MB'}| Select-Object name,itemsinfolder,TopSubject,TopSubjectSize,topsubjectCount,topsubjectPath | export-csv c:\25mb.csv
But i get Error :
The input Object cannot be bound to any parameters for the command either because the command does not take pipeline input or the input and its Properties do not match any of rhte parameters that take pipline input.
Any ideas?Im not so good at pws.
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi all,
have tried all above command but when i did a check it didnt work that well.What i ended up with is following script:
$MBX = Get-Mailbox –resultsize unlimited
$MBX | foreach {New-MailboxExportRequest -Mailbox $_.Identity -ContentFilter {Size -gt '25MB'} -FilePath ('\\server01\pst\ ‘ + $_.Alias + '(' + $_.DisplayName + ').PST')}
Downside with this script is that it export all mailboxes to a pst file.Inside its structure of users folder.
Upside is that it only export mail items that are larger than 25 MB,but you will need to create a search folder to find  items larger than 25mb.
Most of pst files that are exported are less than 2mb in size.So we sorted them by size and delete everything that is less than 25MB.
We then ended up with all mailboxes that have items larger than 25MB.
So if you have over 5000 mailboxes then this wont be recomended.We had over 1200 and the export went fine over night.
Amits recomendation also probably works,but havent tested that one.
THanks all for your help!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Similar Messages

  • Exchange 2013 - powershell - create search folder for items larger than 24mb

    Hi all,
    is it possible to use PowerShell and create search folder in spesific mailbox that contains items larger than 25mb?
    Thanks!
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

    Ok this should be possible.
    I just tested a basic idea of what you want to do on Exchange 2010 SP3. IF you need me to test on 2013 let me know.
    Add the account you want to run the powershell search as to the "Discovery Management" role in AS or ECP.
    This gives you access to the "search-mailbox" command. Using this you should be able to build a search that moves mail to a different folder.
    http://technet.microsoft.com/en-gb/library/dd298173(v=exchg.150).aspx
    Thanks,
    Edit: something like this would help but the target mailbox would be there own I guess
    Search-Mailbox -SearchQuery “Size:>25MB” -TargetMailbox SomeMailbox -TargetFolder Export -LogOnly -LogLevel Full
    Ok so I have found a issue where the command does not allow the source mailbox to be the same as a target mailbox. I dont know if this will help you then unless you go through a long process of moving the mail out then back but thats very long.
    You could create a rule for this but it would have to be run manually with specific settings so I guess that might not work as user training can be difficult. 
    You could write a VBA macro for this and then apply it to all you machines.
    Or there is a 3rd party tool that could help you called
    Auto-Mate
    Sorry I could not be more helpful.
    Good luck

  • HT1311 How can I get updates for apps with new Apple ID

    How can I get updates for apps with new Apple ID. I have apps that I got for free, and some that I have purchased. I had to create a new Apple ID because I don't have a credit card now.

    Apps will always be tied to the ID in which they were purchased or downloaded under. You can not change this unless you buy or download the free  app using the new ID.

  • Incoming Email for a site collection larger than 25GB

    Hello,
    Incoming emails on a site collection not getting to document library. It stays in drop folder. Uls logs shows below message:
    The Incoming E-Mail service has completed a batch. The elapsed time was 00:00:00. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message ID: 0511e09c-fe1b-d07e-a534-adcbf7e5cfbe.
    I have researched but haven't found anything. Incoming email works for other site collections in the farm with smaller size compare to that is not working. Site collection that is not receiving incoming email is size larger than 25G. There is no size
    quota restriction.
    Is there any restriction for incoming email for site collection larger than 25G?
    Thanks,
    Hp

    try these links it may be useful:
    https://social.technet.microsoft.com/Forums/office/en-US/510a203e-6ed9-436e-a8d4-f7daaf0e6adb/problem-with-incoming-emails?forum=sharepointadminlegacy
    https://social.technet.microsoft.com/Forums/office/en-US/1e6cf316-ca56-4d9e-a778-938deca5b283/incoming-email-problem-mail-in-drop-and-mailbox-folder-but-not-in-list?forum=sharepointadminlegacy
    http://blogs.technet.com/b/praveenh/archive/2012/06/28/unable-to-send-emails-to-lists-and-document-libraries-in-sharepoint-2010.aspx
    http://serverfault.com/questions/37018/unknown-alias-error-with-sharepoint-incoming-e-mail
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • JRockit for applications with very large heaps

    I am using JRockit for an application that acts an in memory database storing a large amount of memory in RAM (50GB). Out of the box we got about a 25% performance increase as compared to the hotspot JVM (great work guys). Once the server starts up almost all of the objects will be stored in the old generation and a smaller number will be stored in the nursery. The operation that we are trying to optimize on needs to visit basically every object in RAM and we want to optimize for throughput (total time to run this operation not worrying about GC pauses). Currently we are using hugePages, -XXaggressive and -XX:+UseCallProfiling. We are giving the application 50GB of ram for both the max and min. I tried adjusting the TLA size to be larger which seemed to degrade performance. I also tried a few other GC schemes including singlepar which also had negative effects (currently using the default which optimizes for throughput).
    I used the JRMC to profile the operation and here were the results that I thought were interesting:
    liveset 30%
    heap fragmentation 2.5%
    GC Pause time average 600ms
    GC Pause time max 2.5 sec
    It had to do 4 young generation collects which were very fast and then 2 old generation collects which were each about 2.5s (the entire operation takes 45s)
    For the long old generation collects about 50% of the time was spent in mark and 50% in sweep. When you get down to the sub-level 2 1.3 seconds were spent in objects and 1.1 seconds in external compaction
    Heap usage: Although 50GB is committed it is fluctuating between 32GB and 20GB of heap usage. To give you an idea of what is stored in the heap about 50% of the heap is char[] and another 20% are int[] and long[].
    My question is are there any other flags that I could try that might help improve performance or is there anything I should be looking at closer in JRMC to help tune this application. Are there any specific tips for applications with large heaps? We can also assume that memory could be doubled or even tripled if that would improve performance but we noticed that larger heaps did not always improve performance.
    Thanks in advance for any help you can provide.

    Any suggestions for using JRockit with very large heaps?

  • Peering with AS larger than 65535

    Hi,
    Have an oldish 7200-G2 in the lab that I need to setup with test peering with an AS larger than 65535 - It does not accept asdot notation (i.e. throws an error when I enter the converted AS - It doesnt like the ".").
    Is there any work-around to this? (Aside from IOS upgrade)
    Cheers.

    Hello John,
    if your objective is to test an eBGP peering with a 32 bit AS peer and the C7200-G2 has to play that role you need an IOS upgrade.
    Releases 12.0(32)S11, 12.0(33)S, 12.0(32)SY
    Cisco 7200 Series 
    to build an EBGP session between the C7200 and another 32bit AS capable device there is a special 16 bit AS number for backward compatibility.
     newly reserved AS TRANS# 23456 for interoperability between 4-byte ASN capable and non-capable BGP speakers
    see
    http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/border-gateway-protocol-bgp/data_sheet_C78-521821.html
    Hope to help
    Giuseppe

  • Dealing with KeyStore larger than available memory.

    Hi,
    I'm manipulating a JCEKS/SunJCE KeyStore that has grown larger than available memory on the machine. I need to be able to quickly lookup/create/and sometimes delete keys. Splitting into multiple KeyStores and loading/unloading based on which one the particular request needs isn't ideal.
    Can anyone recommend a file backed KeyStore that doesn't depend on loading the entire file into memory to work with the KeyStore? Or perhaps a different way of using the existing framework?
    Thanks,
    Niall

    You might check the diffferent providers (and ask their developers about it) to see if you can find one; they should be using BER encoding and not DER encoding of the ASN1 structures. In that case the provider is able to read entries and parse through to the target entry (PILE) on demand but you will have a "pile" version which will make your performace pay for it. If somebody offers that, there sure should be some caching and enhancements on the KeyStore implementation not to suck on random searches.
    Start your tests with Bouncycastle provider but I remember, in 2001, certificates generated by the security provider of jcsi (later wedgetail and a part of Quest [Vintela]) were BER encoded. It does not necessarily mean, that they use BER for all constructs now. Furthermore that does not mean that partial load is supported for their implementation of key store.
    Finally if none matched your needs, you can write one security provider yourself. Reading the current keystore once (you hopefully have the passwords for all entries), write the entries in the new keystore file( in BER format) then write a logic (probably with caching) to offer transparent partial load in your keystore implementation; drop me some lines if you need more details or commercial consulting services on this.

  • VPRS updated incorrectly for SO with item cat Ind PO

    Hi SAP Gurus
    We created a SO with item cat (Individual Purchase Order - Account
    Assignment M in PO).In PO we have checkd the item as free goods.
    However during billing the VPRS was not captured from PO price (which
    is 0.00) but it was updated from material master. As for normal items,
    VPRS was updated correctly from PO.
    Pls advise for free goods how can we have the VPRS updated correctly from PO instead of material master.
    Sanjay

    Hi,
    Goto VOV7, select item category-In business data tab - tick determine cost.
    check in MR21 for material price.
    Thanks,
    Mohanprabu C.
    Edited by: mohan prabu on Jul 7, 2009 9:12 AM
    Edited by: mohan prabu on Jul 7, 2009 9:12 AM

  • Service line item History for Contracts with item cat - D and Acc Assg P

    Hello Gurus,
    We have a situation where we create contract with item category D (Service) and account assignment category P (Projects). And for the line items of the PO we have difference services (without a service master) and each service line item has the price and quantity and other required fields. Now it is required to change the price or the quantity or both for this service line time and again (business requirement).
    The task is to to track the price changes and the quantity changes that have happened to the serive line item from the original and we require the report to diplay the original price and the present price on the service line.
    The question is: Is there a standard report in SAP to handle this? Or which are the tables where a service line items history is stored so that it can lead to a development.
    Regards - SS

    Hi Pankaj,
    We are using a Percentage based case (Prorata case)
    For Eg : For Eg for 65% (65KAI )material Price 1000 Rs
    If the Purity percentage varies payment will be done as per the same. For eg : for 70% (70KAI ) Price 1200 Rs. (approx)
    In this case unit of measurement is KAI (kilo active ingredient) .
    Actually we are dealing with dealer price where duties are entered Inclusive of the total price and entered at the time of making GR. and the payment is made as per the same;
    we have one po for 5000 MT. where we received material at first time Qty being 1993 MT.The duties manuallyentered are as follows :BED :24,167.00
    AED : 7,076.00
    ECS : 483.00
    SECES : 242.00
    These duties are flowing correctly in MIRO
    and the MIRO has been Posted and payment is also made.
    But while the balance quantity 2982 kg we received next time and those duties are as flowing as follws:
    BED : 36160
    AED : 10587
    ECS : 723
    SECS : 362
    But here at the MIRO the following duties are flowing instead of above
    BED : 36,526.08
    AED : 10,694.18
    ECS : 730.32
    SECS : 365.66
    What might be the error at this stage.
    waiting for solution at the earliest .
    Regards,
    Girish.C.M.
    09377077122

  • Output Conditions for Header- with Item criteria

    Hi!
    We want to set up the Output conditions for delivery note per storage location.
    SAP has problems with reading it on the header level- as it is only on LIPS. Is there any easy workaround so it picks up the item field?
    Thanks!!
    Cheers
    Bea

    Hello Bea
    You may be able to acheive  this by doing the following:
    1) Add the field 'Storage Location'  (LGORT) to the filed catalog for output with the following activities:
         SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/System Modifications for Output/New Fields
         For Output Control
    2) Then create a condition table for the new access:
       SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/Output Determination/Maintain Output
       Determination for Outbound Deliveries/Maintain Condition Tables
    3) Then add the new condition table to the requisite access sequence:
       SPRO/IMG/Logistics Execution/Shipping/Basic Shipping Functions/Output Control/Output Determination/Maintain Output
       Determination for Outbound Deliveries/Maintain Access Sequences
    Please review OSS note 756688 which says that  you need to 'go to the item output screen before saving the document the header output is found'.
    It may be worthwhile to remain an output at item level with the same access also.
    OSS note: 756688 - Access sequence with item and header fields
    Hope this helps.

  • Intercompany transfer for material with item category Erla

    Hi,
    I have a typical requirement.
    I am creating a value pack(finish good) with item category mainatined as ERLA(while mat master creation) which consistes of 2 items.
    I have maintained a BOM for this value pack(finished material).
    Since ERLA is maintained,I can explode BOM in Sales Order creation(correct me if I am wrong)
    This is okay for sales cycle.
    I have following requirement
    I want to do a Intecompany stock transfer of this value pack(i.e. finish good) with doc type NB.
    The problem in this is that it gives error while creating outbound delivery stating some entries missing in table (do not exactly remember)for NLCC/DOGN.. something like that.
    If anyone has done this type of scenario earlier then request you to send me the configuration settings required to be done in terms of Item category/Delievry combination etc etc .
    This is quite urgent for me.
    If there is any different way to map this Intecompany Stock Transfer of Material (with Item category maintained as ERLA) then please let me know.
    Thanks in advance.
    Regards,
    manOO

    Hi
    You maintain "Item category group" NORM in the Sales org 2 tab, this is used for sales organisation and distribution channel for Outboumd delivery.
    The "General Item category group" does not refer to the Sales organisation and distribution channel, this is used for Inbound delivery.
    In can create the material master in MM01, specify the "Material type" and "Industry sector" .
    For, Item category determination in VOV4, you need to assign like this as below,
    Sales doc type + Item category group + usage + Item category of higher level item = Item category.
    Item category determination for free item,
    OR + NORM + FREE + TAN = TANN.
    As beacuse you are giving the normal material as free, therefore you must give the indication to the system to use it as free material by specifying the usage as "FREE".

  • Mail sent by the program are getting appended for every line item in ITAB.

    Hello Experts,
    My program has to send mail for every line item in my internal table. Each line itme will provide the data to be filled in body of the mail .Now the problem is when i recieve mail in outlook the body of the mail is getting appended every time i recieve the mail
    For example , if the mail has to go for 3 entry in itab out of five then i'm getting 3 mails but 2nd has body of 1 also and 3d has body of 1st and 2nd.
    I'm using loop - endloop and it is happening due to this but is there any other way out to send mails for each line without body getting appended.
    Please see the code below i'm using:-
    LOOP AT lt_bg INTO lw_bg.
    PERFORM populate_message_table.>>>>>>Preparing body
    PERFORM send_email_message.>>>>>>>>> need to capture in loop as evry line itme has distinct subject of mail
    ENDLOOP.
    PERFORM initiate_mail_execute_program.
    Thanks,
    Naveen

    Hi,
    I'm using Clear wa and refresh ITAB but still i'm getting the body appended.
    Thanks

  • Get description for node and items in WD ABAP - Tree

    Hi all,
    I want to dislay the description for all nodes & Items when creating a Tree. In normal ABAP we assign the relevative text and fill the node table & Item table.
    But in the case of WD ABAP how it works.
    Please suggest.
    Thanks
    Sanket sethi

    Hi,
    Refere WD application WDT_TREE. In this application, 2 attributes are taken as mt_folder_struc and mt_file_struc. These are of type TIHTTPNVP. While filling these tables, make sure to pass proper parent child node.
    See methods, FILL_FILETABLE and FILL_FOLDERTABLE.  field NAME corresponds to child key
    and  field VALUE corresponds to parent key. as these are of type STRING, you need to concatenate text description to code and accordingly fill the tables mt_folder_struc and mt_file_struc.
    Regards,
    Chandra

  • Sales order create/change line item with reference to contract - Open quantity not getting deducted for copied line item from the contract

    Hi friends,
    Please provide some valuable inputs for the following scenario:
    When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
    Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
    P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
    Thanks,
    Sandeep
    Message was edited by: sandeep

    Sandeep,
    Yes, that was my original interpretation.  I was having a hard time believing that someone would ask such a question. 
    I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
    I do not provide advice in these forums about details of enhanced solutions.  Perhaps one of the other members will be more willing to do your work for you.
    Best Regards,
    DB49

  • How to execute 261 goods issue for REM order items other than with MFBF?

    Our users are looking for an easy way to post a 261 goods issue for a single component of a repetitive manufacturing order without using the MFBF transaction where they have to deselect all other components of the order.
    The ideal situation would be to use a transaction similar to MB1C or MB11 to simply enter the planned REM order, component material id, and its respective quantitiy and then post. 
    Any information you can provide will be helpful.

    Strat,
    Thank you for your response but LT01 does not seem to provide the functionality that I am looking for.
    To clarify, our users would like to complete a 261 movement for a single component within a particular repetitive manufacturing, without going into the MFBF transaction and having to deselect all of the unnecessary components just to single out one. 
    So ideally we would like to use the MB1C transaction for a 261 movement. Enter in a REM order, the material id, and the quantity to be issued and simply post a single material.  Currently when we attempt to do this with MB1C we receive the error M7162 that our order, which is a product cost collector, cannot be processed with this transaction.
    Hope this helps clear it up and thanks again for your response.
    - Nick

Maybe you are looking for

  • Error while updating JDBD table

    Hi all, Am getting the error at the receiver JDBC CC. I have checked the conceren mapping also . i t is working under test tab. Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement

  • Previews not updating after CS3 round trip

    I'm having a bunch of weird Aperture problems. I've tried rebooting and rebuilding the library and neither worked. Here's the latest. I'm using 2.1 by the way. Make a bunch of adjustments on a raw file (I'm using .CR2) then use the Edit With command

  • How to associate events to items

    Hi everybody. I have a page in OAS Portal in which I can add new items, like a list of items. I need to develop any kind of event that detects that this item has been added and with a call to a PLSQL procedure can notice about this new item to other

  • Background task SystemTriggerType.SmsReceived won't triggered

    I'm testing tasks in background windows phone 8.1 but the trigger SystemTriggerType.SmsReceived is not working for me . Has anyone managed to make it work ? I used this example of the MS background task , but only the original version worked. Replace

  • Reinstalling itunes removes my dvd drive

    I cannot burn playlists to disc from itunes.  I have tried uninstalling and reinstalling itunes.  The error message i get is "disc burner or software not found."  I try to update the driver for the drive then it disappears from "devices" altogether.