Get mouse thumb buttons to work with pcmanfm?

I've always wanted pcmanfm to read my thumb buttons (button 8 and 9) correctly
This is how I set it for applications such as firefox to read my button 8 and 9 correctly:
In ~/.xbindkeysrc
## Mouse Thumb Button mapping
"xvkbd -xsendevent -text "\[XF86Back]""
m:0x0 + b:8
"xvkbd -xsendevent -text "\[XF86Forward]""
m:0x0 + b:9
So that button8=back and button9=forward
Any ideas? Maybe a little tweak in the source code?
Edit::
I scanned through the source codes and found some useful tips:
Alt+Left=go back
Alt+Right=go forward
Alt+UP=go to parent
Alt+Home=go ~
Never known that. I think it'd be just as simple as these lines to add mouse button 8 or just keyboard "\[XF86Forward]" which is bound to button 8 to the source. But I'm no coder I don't know how. Too bad.
BTW, I think I've posted to the wrong section. LOL
Last edited by lolilolicon (2009-08-26 08:49:57)

Similar Messages

Issues with getting the slide button to work after upgrade to iOS 7.02 and 7.03

Ever since upgrading to iOS 7.02 and 7.03 having issues with getting the slide button to work to open up iPad 2. Happened last week and was able to restore it to new and get it to work again and it worked great until one week later (this morning) doing the same thing. Have tried restoring iPad to new 3 times (via itunes) and still unable to get the slide button to move so can use the iPad. IPad able to charge, able to restore, able to sync with itunes even able to recover but not able to get past first screen where you have to slide to access iPad. Any help would be greatly appeciated. Live about 300 miles from nearest Apple store.

I am beginning to wonder whether there isn't some weird problem with that Home button.
Try this: Settings > General > Accessibility > AssistiveTouch = On
This will place a button on the iPad's screen.
You can move this button anywhere on the screen.
This button gives you - amongst many other things - a soft Home button.
To turn your iPad on, you can use the Sleep/wake button or move a small magnet across the bezel of the iPad where the volume controls are.
If you use the magnet, then: Settings > General > Lock / Unlock = On
Now should not need to press the Home button anymore.
If this method allows you to use your iPad without a hitch, then suspect hardware problems with the Home button.

Has anyone been able to get a mouse scroll wheel to work with a scrolling text box in authorware?

Has anyone been able to get a scroll wheel to work with a
scrolling text box in authorware? Is there any way to attach the
hardware of a scroll wheel to a scrolling text in a piece? Sure
would make things easier for the reader.

I doubt it. Maybe using the WinCtrls.u32? But after a few
tries years
ago (before the WinCtrols.u32), I'd pretty much given up.
Erik
edwin e wrote:
> Has anyone been able to get a scroll wheel to work with
a text box in authorware?
Erik Lord
http://www.capemedia.net
Adobe Community Expert - eLearning
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
Authorware Tips!

I cannot get my iPad 2 to work with VPN provider.

I cannot get my iPad 2 to work with my VPN service provider. Using OS 4.3.3. iPad purchased in the USA. Have heard there are issues with iPad 2 and VPN support. Any suggestions?

You can try this ... hold down on the sleep button and the power button at the same time for about 10 seconds until you see the Apple logo on the screen, release the buttons and see if the iPad restarts and you can use it.

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Hi, I have a late 2011 MacBook Pro but cant get the mirroring function to work with Apple TV. I've got the most recent Software 10.7.5 but cant see the mirroring icon or turn this on. I'm able to mirror from my Ipad but not my Mac, any thoughts?

Welcome to the Apple Support Communities
AirPlay Mirroring is supported on your Mac, but it needs OS X Mountain Lion (10.8). See > http://support.apple.com/kb/HT5404
You have two possibilities:
1. Make a backup, open App Store and purchase Mountain Lion to upgrade to this OS X. Then, you will find the AirPlay Mirroring icon at the top right of the display, on the menu bar, or on System Preferences > Displays.
2. Keep OS X Lion and use AirParrot > http://www.airparrot.com
Both options work properly, but I recommend AirPlay Mirroring as it doesn't need a third-party program

How can I get my Canon A620 to work with Windows 7

Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ?
I'll keep looking around.
Steve

If you need photo software and don't have any you can download Canon software here.
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
If you decide to connect the camera via USB you don't need a driver; its built into W7.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Trying to get a WRT54GX2 wireless router working with a W...

Trying to get a WRT54GX2 wireless router working with a WPC54G wireless card. The laptop and desktop both will access the Internet and work when hardwired through the router's Ethernet ports. When trying to access wireless, the Laptop shows to be connected to the router and also to Internet, but Internet Explorer can not access any websites. Suggestions? Thanks.

what ip address does the laptop get ?? ensure that the laptop is not set for a static ip add....and it gets an ip add from the router ..

Can't get Bose computer speakers to work with my Mac pro lion

I have just bought the Bose Companion 11 computer speakers for my Mac Book Pro. They are set up correctly (in the headphone jack) and they play my itunes music beautifully. However, when they are plugged in I get no sound from internet videos, etc. I have to take the plug out of my headphones jack and then I get the sound from my computer but not the speakers. Can anyone help ..I don't know what I am doing wrong...or how to get the Bose speakers to work with all my computer (internet content). I looked at system preferences and the Output says headphone port but the input says internal microphone (built-in).
Please help.
Thank You,
Karen

Don't worry about offending me...I am, admittedly, no computer whiz! I have had speakers before....but I took these in to Best Buy...with my computer (Where I bought them) and the "Geek" person plugged them in and they worked.
What we did notice was that the jack that goes into the plug just below the left speaker plug was loose. So I brought it home and it worked! Then tonight I turned on my computer and no speaker input, so I checked the back of the right speaker and that plug (if that is the right name?) had fallen out...so re-connected it and they work! So, I guess I may have to tape that plug in ...or what do you suggest??...so it doesn't keep falling out.
Thanks so much for answering me.
Karen

What is the best way to get a time capsule to work with a new network name?

What is the best way to get a time capsule to work with a new network name?

Well it seems that you did not explain to us the full story. Did you change ISP's or something? Why would it not show up anymore?
What colour is the light on the time-capsule? If it's blinking amber, then you probably need to do a factory-reset. That should get it to show up again in AirPort Utility.

I have Windows 7 and PS Elements 10 and can't get the text button to work properly. What can I do?

I have Windows 7 and PS Elements 10 and can't get the text button to work properly. What can I do?

Try selecting the T tool and then doing a reset (see image below)

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Power button not working with 7.1 update

Power button not working with 7.1 update

I take it your phone was still under warranty then?!
Unfortunately I was not so lucky, and my experience was rather poor service-wise. They're called Apple Geniuses but I beg to differ...
I'm not sure where in the world you are located, but my "experience" involved visiting the Leeds store and confusing everyone with this issue. I can tell you, just by the looks on their faces, they had never been faced with this problem before!
I suggested my phone was rolled back to the version it was previously to establish whether this was the underlying issue. I was asked whether my phone had been backed up and as it had the "genius" proceeded to restore the phone "as it came out of the factory" to quote him.
When this was completed the phone was still doing the same thing and I was advised "the software update must have highlighted a hardware issue." I was told it would have to be physically repaired and was told to have this done by a third party as Apple would charge approximately £160. Incidentally, I work in IT and repair PC's, laptops and mobile devices for a living and made a point of raising that a sleep/wake button ribbon cable for an iPhone 4S can be bought on eBay for as little as £3.00...if indeed it does need replacing, which I suspect it does not.
Anyway, so now I was left with a phone for the rest of the day which was blank and still the problem remained. On the train, on the way home, you can then imagine my disbelief when I actually took the time to look at my phone's configuration and realised that iOS version 7.1 was still installed, so obviously the issue would still remain. So the visit to the "genius bar" was a complete waste of time as I'm still in the very same position, and I still blame the 7.1 update for this...let's home 7.2 is released very shortly and this solves the issue...
I have downloaded the package to roll the version back to 7.0 but I'm a little reluctant to carry this out yet as I would expect Apple to so the issue they have caused. This is NOT hardware related but software.
I seriously think Android is calling me...

Answer: to How can I get the reset button to work.

How can I get the reset button to work?: Answer
Thanks to everyone who helped on this. You are awesome. Especially Ned!! Posted here because I was unable to add more to the existing post.
Here is the question:
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/removeChild()
    at AddATree2/onReset()
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
Here is the answer:
//when you click the reset button everything is removed from the stage
    //except the star, baclground, and reset button (trees and greeting REMOVED)
    public function onClear(Event:MouseEvent):void
            if (tree3) removeChild(tree3);
            if (tree2) removeChild(tree2);
            if (webText) removeChild(webText);
            if (tree) removeChild(tree);
            clickCount = 0;

This is the answer to what to put in the onclear function.

Why won't my secure thumb drive (FAT32) work with os lion?

Why won't my secure thumb drive (FAT32) work with os lion? I have used it ok with older mac operating systems. When the thumb drive is inserted in the usb port, an error message appears stating that the disk was not ejected properly. It shows as readonly in Finder. When I try to eject it, the spinning wheel appears and I have to relaunch finder.

Hi princessmonsta,
Thanks for using Apple Support Communities. This article has some information on things to check if your sound is not working as expected that may help:
OS X Mavericks: Adjust your computer’s sound output
http://support.apple.com/kb/PH13908
Cheers,
- Ari

How do I get my i phone to work with my security camera while on vacation, I have a wansview NCB547W

I cannot seem to get my WANSVIEW NCB541W to work with my I phone.

Hello JaeRoc48,
I understand that the sound is not working.
Go to start.
Type Sound.
Select sound.
Select speakers as default.
Click OK.
Let me know how everything goes.

Get mouse thumb buttons to work with pcmanfm?

Similar Messages

Maybe you are looking for