Get only common members between text file and ad group member.

Hello,
I have a txt file with users SamAccountName (1column) and need to show(in datagrid) only common members in specific AD group (FreeAppli group).
Text file :
x0001
x0002
FreeAppli:
X9090
x0001
x0002
Datagrid:
x0001
x0002
Thank you

try:
$UsersFromFile = Get-Content ".\users1.txt"
$UsersFromGroup = (Get-ADGroupMember -Identity "FreeAppli").SamAccountName
$CommomMembers = $UsersFromFile.Where({ $UsersFromGroup -contains $_ }) # Intersection of 2 arrays
$CommomMembers
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Similar Messages

Reading data from a text file into PAS - Dimension member names truncated

Hi,
I created a procedure to dump variables and data into a text file to load into another model. I used a semicolon as a field seperator.
The data, measures and dimension members are dumped properly into a text file and no dimension member names are truncated .
However when I read the data into a measure, and I issue a peek command, dimension meber names are read in truncated
and remain full names in the text file. Any reason for this? What do I need to do to prevent this from happening?
THanks.
Lungile

Hi Lungile,
The problem that you're likely having is that you haven't created a file description for the file from which you're reading. When loading data into Application Server from a text file, you would normally go through three steps:
1. Enter the ACCESS EXTERNAL subsystem
2. Specify the name of the file to be read
3. Specify the format of the file field names, types, widths, and positions.
If you go into the Application Server help, select "Application Server Help", then "Application Server at the command level", then "Variables and reading in data", and then "Reading an external file", you will have the process of the steps you need to follow outlined for you, including links to the help topic for each command you need to issue.
So what I think you need to do is use the DESCRIPTION command to specify the names of your fields, their type, and also their width, in order to ensure no truncation of data on the load.
The same DESCRIPTION statement is required if you want to use your text file as the source of a dimension.
Hope this helps,
Robert

What is difference between TEXT mode and BINARY mode?

Hi,
          What is difference between TEXT mode and BINARY mode? In TEXT mode what is "ENCODING DEFAULT".
OPEN DATASET wl_filename FOR INPUT
                          IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET wl_filename FOR INPUT
                          IN BINARY MODE .

Hi vishnu,
1. files like .TXT files are considered to be text,
   and other files like .EXE . DOC etc are binary files.
2. In text files, after each line, there are two
   internal binary characters
one for line feed and another one for newline.
3. But, we don't have any meaning for it,
   when we view such files in notepad, for eg.
   Hence, to only get the understandable content,
   we should open such TXT files, in text mode.
(we can also open them in binary mode,
but we will get two extra characters after each line,
   and such two extra characters are meaningless
for interpreting the text)
4. In binary mode, each byte by byte is considered,
   without any meaning.
regards,
amit m.

Please help! I defragged my hard drive and now Illustrator CS6 is trying to open all of my complex Illustrator files with a "Text Import Options" box as if they are text files, and they are not opening!

Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!

Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help...

How to get summary columns in delimited text file

How to get summary columns in delimited text file
I am trying to generate a delimited text file output with delimited_hdr = no.The report is a Group above report with summary columns at the bottom.In the text file the headers are not getting repeated & thats ok.The problem is the summary data is getting repeated for each row of data.Is there a way where i will get all the data & summary data will get displayed only once.I have to import the delimited text file in excel spreadsheet.

Sorry there were a typos :
When I used desformat=DELIMITEDDATA with desttype=FILE, I get error "unknown printer driver DELIMITEDDATA". When you look for help, DELIMITED is not even listed as one of the values for DESTFORMAT. But if you scroll down and look for DELIMITER it says , this works only in conjuction with DESTFORMAT=DELIMITED !!!!!!??!! This is in 9i.
Has this thing worked for anybody ? Can anyone please tell if they were able to suppress the sumary columns or the parent columns of a master-detail data for that matter ?

Having trouble reading specific lines from a text file and displaying them in a listbox

I am trying to read specific lines from all of the text files in a folder that are reports. When I run the application I get the information from the first text file and then it returns this error: "A first chance exception of type 'System.ArgumentOutOfRangeException'
occurred in mscorlib.dll"
Below is the code from that form.
Option Strict On
Option Infer Off
Option Explicit On
Public Class frmInventoryReport
Public Function ReadLine(ByVal lineNumber As Integer, ByVal lines As List(Of String)) As String
Dim intTemp As Integer
intTemp = lineNumber
Return lines(lineNumber - 1)
lineNumber = intTemp
End Function
Public Function FileMatches(ByVal folderPath As String, ByVal filePattern As String, ByVal phrase As String) As Boolean
For Each fileName As String In IO.Directory.GetFiles(folderPath, filePattern)
If fileName.ToLower().Contains(phrase.ToLower()) Then
Return True
End If
Next
Return False
End Function
Private Sub frmInventoryReport_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim intcase As Integer = 1
Dim strTemp, strlist, strFile As String
Dim blnCheck As Boolean = True
strFile = "Report Q" & intcase.ToString & ".txt"
Do While blnCheck = True
strFile = "Report Q" & intcase.ToString & ".txt"
Dim objReader As New System.IO.StreamReader("E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\" & strFile)
Dim allLines As List(Of String) = New List(Of String)
Do While objReader.Peek <> -1
allLines.Add(objReader.ReadLine())
Loop
objReader.Close()
strlist = ReadLine(1, allLines) & "" & ReadLine(23, allLines)
lstInventory.Items.Add(strlist)
intcase += 1
strTemp = intcase.ToString
strFile = "Report Q" & intcase.ToString & ".txt"
blnCheck = FileMatches("E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\", "*.txt", intcase.ToString)
Loop
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim intcase As Integer = 1
Dim strTemp, strlist, strFile As String
Dim blnCheck As Boolean = True
strFile = "Report Q" & intcase.ToString & ".txt"
Do While blnCheck = True
strFile = "Report Q" & intcase.ToString & ".txt"
Dim objReader As New System.IO.StreamReader("E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\" & strFile)
Dim allLines As List(Of String) = New List(Of String)
Do While objReader.Peek <> -1
allLines.Add(objReader.ReadLine())
Loop
objReader.Close()
strlist = ReadLine(1, allLines) & "" & ReadLine(23, allLines)
lstInventory.Items.Add(strlist)
intcase += 1
strTemp = intcase.ToString
strFile = "Report Q" & intcase.ToString & ".txt"
blnCheck = FileMatches("E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\", "*.txt", intcase.ToString)
Loop
End Sub
End Class
Sorry I'm just beginning coding and I'm still a noob. Any help is appreciated. Thank you!

Ok, so if I'm following this correctly you should be able to just loop through all of the files in that folder whose file name matches the pattern and then read the first 22 lines, recording only the first and the last.
Exactly how you store the animal data probably depends on how you are going to display it and what else you are going to do with it. Is there anything other than name and cage number that should be associated with each animal?
You might want to make a dataset with a datatable to describe the animal, or you might write a class, or you might just use something generic like a Tuple. Here's a simple class example:
Public Class Animal
Public Property Name As String
Public Property Cage As String
Public Overrides Function ToString() As String
Return String.Format("{0} - {1}", Name, Cage)
End Function
End Class
With that you can use a routine like the following to loop through all of the files and read each one:
Dim animals As New List(Of Animal)
Dim folderPath As String = "E:\Furry Friends Animal Shelter Solution\Furry Friends Animal Shelter\"
For Each filePath As String In System.IO.Directory.GetFiles(folderPath, "Report Q?.txt")
Using reader As New System.IO.StreamReader(filePath)
Dim lineIndex As Integer = 0
Dim currentAnimal As New Animal
While Not reader.EndOfStream
Dim line As String = reader.ReadLine
If lineIndex = 0 Then
currentAnimal.Name = line
ElseIf lineIndex = 22 Then
currentAnimal.Cage = line
Exit While
End If
lineIndex += 1
End While
animals.Add(currentAnimal)
End Using
Next
'do something to display the animals list
Then you might bind the animals list to a ListBox, or loop through the list and populate a ListView. If you decided to fill a datatable instead of making Animal instances, then you might bind the resulting table to a DataGridView.
There are lots of options depending on what you want and what all you need to do.
Reed Kimble - "When you do things right, people won't be sure you've done anything at all"

How to read a text file and write text file

Hello,
I have a text file A look like this:
0 0
0 A B C
1 B C D
2 D G G
10
1 A R T
2 T Y U
3 G H J
4 T H K
20
1 G H J
2 G H J
I want to always get rid of last letter and select only the first and last line and save it to another text file B. The output should like this
0 A B
2 D G
1 A R
4 T H
1 G H
2 G H
I know how to read and write a text file, but how can I select the text when I am reading a text file. Can anyone give me an example?
Thank you

If the text file A look like that
0 0
0 3479563,41166 6756595,64723 78,31 1,#QNAN
1 3479515,89803 6756588,20824 77,81 1,#QNAN
2 3479502,91618 6756582,6984 77,94 1,#QNAN
3 3479516,16334 6756507,11687 84,94 1,#QNAN
4 3479519,14188 6756498,54413 85,67 1,#QNAN
5 3479525,61721 6756493,89255 86,02 1,#QNAN
6 3479649,5546 6756453,21824 89,57 1,#QNAN
1 0
0 3478762,36013 6755006,54907 54,8 1,#QNAN
1 3478756,19538 6755078,16787 53,63 1,#QNAN
2 0
3 0
N 0
I want to read the line that before and after 1 0, 2 0, ...N 0 line to arraylist. I have programed the following code
public ArrayList<String>save2;
public BufferedWriter bufwriter;
File writefile;
String filepath, filecontent, read;
String readStr = "" ;
String[]temp = null;
public String readfile(String path) {
int i = 0;
ArrayList<String> save = new ArrayList <String>();
try {
filepath = "D:\\thesis\\Material\\data\\CriticalNetwork\\test3.txt";
File file = new File(filepath);
FileReader fileread = new FileReader(file);
BufferedReader bufread = new BufferedReader(fileread);
this.read = null;
// read text file and save each line content to arraylist
while ((read = bufread.readLine()) != null ) {
save.add(read);
// split each arraylist[i] element by space and save it to String[]
for(i=0; i< save.size();i++){
this.temp = save.get(i).split(" ") ;
// if String[] contain N 0 such as 0 0, 1 0, 2 0 then save its previous and next line from save arraylist to save2 arraylist
if (temp.equals(i+"0")){
this.save2.add(save.get(i));
System.out.println(save2.get(i));
} catch (Exception d) {
System.out.println(d.getMessage());
return readStr;
My code has something wrong. It always printout null. Can anyone help me?
Best Regards,
Zhang

To get a word in the text file

Hi,
I m beginner to java.
HOw i get a word in the text file.
I used this code, it is only display the all sentence which are available in the text file.
But , I need to print particular word (if it is available in that text file)
package com.beryl;
import java.io.*;
class FileReadTest {
public static void main (String[] args) {
     FileReadTest f = new FileReadTest();
f.readMyFile();
void readMyFile() {
     BufferedReader dis =null;
String record = null;
int recCount = 0;
try {
File f = new File("E:/hello/abc.txt");
FileInputStream fis = new FileInputStream(f);
BufferedInputStream bis = new BufferedInputStream(fis);
dis
= new BufferedReader(new InputStreamReader(bis));
while ( (record=dis.readLine()) != null ) {
recCount++;
System.out.println(recCount + ": " + record);
} catch (IOException e) {
// catch io errors from FileInputStream or readLine()
System.out.println("Uh oh, got an IOException error!" + e.getMessage());
} finally {
// if the file opened okay, make sure we close it
if (dis != null) {
     try {
dis.close();
     } catch (IOException ioe) {
Thanks & Regards,
kumar

I used this code, it is only display the all
sentence which are available in the text file.
But , I need to print particular word (if it
is available in that text file)if
String.indexOf()

How to read the contents of a text file and populate the data in a table ?

Hello All,
Can anyone advise on how to acheieve the above ? I am trying to read in a text file (CSV) and have the contents populated to the respective UI elements in a table. Any help is greatly appreciated.
from
Kwok Wei

Hi,
Let us consider you have list of names(Seperated by delimeter) in a text file and you want to display in a table.
1. Create Context Node "Names" and context attribute "Name"
2. Create Table and bind to the above context.
3.Write the following code in the "Init method.
try{
FileReader f =new FileReader("");
BufferedReader r=new BufferedReader(f);
String names=r.readLine();
Vector Names=new Vector();
// Use Tokenizer and store all the names i a vector//
for(int i=0;i<Names.size();i++){
IPrivate<<VieName>>.INameElement ele=wdContext.createNameElement();
ele.set<<Name>>( Names.get(i).toString());
wdContext.NodeName().addElement(ele);
Regards, Anilkumar
Message was edited by: Anilkumar Vippagunta

I need to read data from a text file and display it in a datagrid.how can this be done..please help

hey ppl
i have a datagrid in my form.i need to read input(fields..sort of a database) from a text file and display its contents in the datagrid.
how can this be done.. and also after every few seconds reading event should be re executed.. and that the contents of the datagrid will keep changing as per the changes in the file...
please help as this is urgent and important.. if possible please provide me with an example code as i am completely new to flex...
thanks.....

It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing.

How can i read the text files and buffer the data in Vector?

hi. I have been running into this problem for days, but with no luck and losing right direction.
The problem is : I am trying to read a text file and buffer the data into a
Queue for each user.
the sample text file is as below:( 1st column is timestamp, 2nd is user_id, 3rd is packet_id, 4th is packet_seqno, 5th is packet_size)
0 1 1 1 512
1 2 1 2 512
2 3 1 3 512
3 4 1 4 512
4 5 1 5 512
5 6 1 6 512
6 7 1 7 512
7 8 1 8 512
8 9 1 9 512
9 10 1 10 512
10 1 2 11 512
11 2 2 12 512
12 3 2 13 512
13 4 2 14 512
14 5 2 15 512
15 6 2 16 512
16 7 2 17 512
17 8 2 18 512
18 9 2 19 512
19 10 2 20 512
20 1 3 21 512
21 2 3 22 512
22 3 3 23 512
23 4 3 24 512
24 5 3 25 512
25 6 3 26 512
26 7 3 27 512
27 8 3 28 512
28 9 3 29 512
29 10 3 30 512
30 1 4 31 512
31 2 4 32 512
32 3 4 33 512
33 4 4 34 512
34 5 4 35 512
35 6 4 36 512
36 7 4 37 512
37 8 4 38 512
38 9 4 39 512
39 10 4 40 512
40 1 5 41 512
41 2 5 42 512
42 3 5 43 512
43 4 5 44 512
44 5 5 45 512
45 6 5 46 512
46 7 5 47 512
47 8 5 48 512
48 9 5 49 512
49 10 5 50 512
50 1 6 51 512
51 2 6 52 512
52 3 6 53 512
53 4 6 54 512
54 5 6 55 512
55 6 6 56 512
56 7 6 57 512
57 8 6 58 512
58 9 6 59 512
59 10 6 60 512
60 1 7 61 512
61 2 7 62 512
62 3 7 63 512
63 4 7 64 512
64 5 7 65 512
65 6 7 66 512
66 7 7 67 512
67 8 7 68 512
68 9 7 69 512
69 10 7 70 512
70 1 8 71 512
71 2 8 72 512
What I wanna do is to read all the data above and buffer them in a queue for each user( there are only 10 users in total).
I already created a class called Class packet:
public class packet {
    private int timestamp;
    private int user_id;
    private int packet_id;
    private int packet_seqno;
    private int packet_size;
    /** Creates a new instance of packet */
    public packet(int timestamp,int user_id, int packet_id,int packet_seqno, int packet_size)
        this.timestamp = timestamp;
        this.user_id=user_id;
        this.packet_id=packet_id;
        this.packet_seqno=packet_seqno;
        this.packet_size=packet_size;
}then I wanna to create another Class called Class user which I can create a queue for each user (10 users in total) to store type packet information. the queue for each user will be in the order by timestamp.
any idea and sample code will be appreciated.

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I inste

Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I instead just keep everything on my ipod and then if I have to get a new computer or something just download all my songs from the ipod to my new computer's itunes? Will that work? Will I still be able to keep all my songs that way?

I'm going to assume the consolidating files does not work due to hard drive space limitations.
Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility? That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
Also, using the Apple article on moving the library, take a slight twist on what it says. Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation.

Where does this java program read a text file and how does it output the re

someone sent this to me. its a generic translator where it reads a hashmap text file which has the replacement vocabulary etc... and then reads another text file that has what you want translated and then outputs translation. what i don't understand is where i need to plugin the name of the text files and what is the very first line of code?
[code
package forums;
//references:
//http://forums.techguy.org/development/570048-need-write-java-program-convert.html
//http://www.wellho.net/resources/ex.php4?item=j714/Hmap.java
import java.util.Map;
import java.util.HashMap;
import java.util.Iterator;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileReader;
public class Translate {
public static void main(String [] args) throws IOException {
if (args.length != 2) {
System.err.println("usage: Translate wordmapfile textfile");
System.exit(1);
try {
HashMap words = ReadHashMapFromFile(args[0]);
System.out.println(ProcessFile(words, args[1]));
} catch (Exception e) {
e.printStackTrace();
// static helper methods
* Reads a file into a HashMap. The file should contain lines of the format
* "key\tvalue\n"
* @returns a hashmap of the given file
@SuppressWarnings("unchecked")
private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException {
BufferedReader in = null;
HashMap map = null;
try {
in = new BufferedReader(new FileReader(filename));
String line;
map = new HashMap();
while ((line = in.readLine()) != null) {
String[] fields = line.split("\\t", 2);
if (fields.length != 2) continue; //just ignore "invalid" lines
map.put(fields[0], fields[1]);
} finally {
if(in!=null) in.close(); //may throw IOException
return(map); //returning a reference to local variable is safe in java (unlike C/C++)
* Process the given file
* @returns String contains the whole file.
private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException {
BufferedReader in = null;
StringBuffer out = null;
try {
in = new BufferedReader(new FileReader(filename));
out = new StringBuffer();
String line = null;
while( (line=in.readLine()) != null ) {
out.append(SearchAndReplaceWordsInText(words, line)+"\n");
} finally {
if(in!=null) in.close(); //may throw IOException
return out.toString();
* Replaces all occurrences in text of each key in words with it's value.
* @returns String
private static String SearchAndReplaceWordsInText(Map words, String text) {
Iterator it = words.keySet().iterator();
while( it.hasNext() ) {
String key = (String)it.next();
text = text.replaceAll("\\b"+key+"\\b", (String)words.get(key));
return text;
* @returns: s with the first letter capitalized
String capitalize(String s)
return s.substring(0,0).toUpperCase() + s.substring(1);
}

without what arguments?Without any arguments. If there are no arguments, there are no arguments of any kind. If you have a zoo with no animals in it, it's not meaningful to ask whether the animals which are not there are zebras or elephants.
does it prompt me to give it a text file name?Apparently.
when i run it this is all i get:
usage: Translate wordmapfile textfile
Press any key to continue...Right. And "wordmapfile" is almost certainly supposed to be a file that holds the word map, and "textfile" is almost certainly the file of text that it's going to translate.

Reading multiple text files and writing them to one text file

Hi,
I'm trying to read a number of text files and write them to a single master file. My program reads all the files but only writes the last one to the master file.
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
// Input/Output Classes
import java.util.Scanner;
import java.io.PrintWriter;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.FileNotFoundException;
import javax.swing.JFrame;
import javax.swing.JTextField;
import javax.swing.JTextArea;
import java.awt.GridLayout;
public class Actor implements ActionListener
public static String DataRoot = "I:\\JAVA\\UBP\\DAT
public static JFrame SW = new JFrame();
public static JTextField txtSPath;
public static JTextArea txtTable;
public void actionPerformed( ActionEvent e )
String Command = e.getActionCommand();
if (Command.equals("Process") )
SetupWin();
ProcessAll();
public void SetupWin()
SW.setTitle("void");
SW.setSize(300,400);
SW.setLayout(new GridLayout(6,1));
txtSPath = new JTextField(40);    SW.add(txtSPath);
txtTable = new JTextArea(10, 40); SW.add(txtTable);
SW.setVisible(true);
public void ProcessAll()
Process("Dunstable","Finance");
Process("Dunstable","Production");
Process("Dunstable","Sales");
public void Process(String Town, String Dept)
String SPath = DataRoot + Town + "
" + Dept + ".txt";
String MPath = DataRoot + "masterFile" + ".txt";
txtSPath.setText(SPath);
String message = "Trying " + SPath;
System.out.println(message);
String SlaveTable=message;
try// if following fails an exception is thrown
Scanner Slave = new Scanner(new FileInputStream(SPath)); // reads slave file
PrintWriter outputStream = null;
outputStream = new PrintWriter(new FileOutputStream(MPath));
while ( Slave.hasNextLine() ) // reads text line by line
//Read and output next record
String PartRecord = Slave.nextLine();
String FullRecord = Town + " " + PartRecord;
System.out.println(FullRecord);
outputStream.println(FullRecord);
Slave.close();
outputStream.close();
txtTable.setText(SlaveTable);
//An Exception Error would be THROWN by above & CAUGHT below
catch(FileNotFoundException e)
message = "Could Not Find " + SPath;
System.out.println(message);     //console
txtSPath.setText(message);     //window
catch(IOException e)
System.out.println("Slave I/O Problem " + SPath);
}Edited by: Ardour on Mar 4, 2008 1:53 PM

I haven't looked closely, but my spidey sense tingles at this:
new FileOutputStream(MPath)This will clobber (erase) the previous contents of the file. Open in append mode:
new FileOutputStream(MPath, true)Of course, if the file exists before you run this code, you will end up append to the original contents. If that is not wanted, consider using File's delete method first.

Convert XML to text file and sending the same via Mail receiver adapter

Dear All,
I have a requirement like....
I am getting a XML file as a result of mapping and it needs to be converted to a TEXT file and
the converted file needs to be sent to a mail address in text format.
Any body has idea how to achieve this?
Thanks in advance for your help.
Regards
Hari

>
HP CReddy wrote:
> Dear All,
>
> I have a requirement like....
>
> I am getting a XML file as a result of mapping and it needs to be converted to a TEXT file and
> the converted file needs to be sent to a mail address in text format.
>
> Any body has idea how to achieve this?
>
> Thanks in advance for your help.
>
> Regards
> Hari
use the StructXML2Plain or XML2Plain from the standard MessageTransformBean
Add the module to you Mail adapter before the mail adapters standard module itself
Ref: http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm

Get only common members between text file and ad group member.

Similar Messages

Maybe you are looking for