Get PIX Connections via SNMP

Hello Experts!
Is there any way to query my PIX 515e to get a list of all it's current connections? I realize this could be ALOT, but if I get a trap that the connection upper-threshold has been reached, I would like to know what those connections are. Is there a way to do this via SNMP? Or any other way than logging in and doing a show conn? Thanks in advance!

There is no SNMP message that can be used to define a upper threshold for the connections that can be used to check the connection status. You can use a script that can automatically login and check the connections on your device or you can use some network management software for this.

Similar Messages

Embryonic connections via SNMP

Hello All,
I would like to know if it is possible to get the "Current number of Embryonic Connections" via SNMP.
What is the OID ? and where I can find it ?
Thanks a lot,
Reuven Elkabetz

Hi Reuven.
I'm afraid there is no such OID for ACE. I saw it only for FIREWALL MIB but it's not supported by ACE.

How to get a connection via a proxy?

Hello all,
I'm writng an application that sends a request to the google search engine and then downloads the contents of the web page returned. Connecting from home via a dial up causes no problems but when i try the same code from college (which uses a proxy) i get an IOException. I think this is what is causing the problem. Another developer posted a message with a similar problem to myself and i used the code he was given as a possible solution but it hasn't solved the problem. I posted the code i'm using below. any suggestions would be welcome because i'm clueless as to what to do next.
import java.net.*;
import java.io.*;
import java.util.*;
public class GoogleConnector {
String hostname = "www.google.com";
int port = 80;
String s1, s2 = new String();
Set hs = new HashSet();
Properties systemProperties = System.getProperties();
// here is the method to get the URLs
public Set getList(String arg1) {
try {
systemProperties.put("proxySet","true");
systemProperties.put("proxyHost","192.168.5.251");
systemProperties.put("proxyPort","3129");
systemProperties.put("socksProxyPort","3129");
systemProperties.put("socksProxyHost","192.168.5.251");
System.setProperties(systemProperties);
Socket s = new Socket(hostname,port);
InputStream sin = s.getInputStream();
BufferedReader fromServer = new BufferedReader(new InputStreamReader(sin));
OutputStream sout = s.getOutputStream();
PrintWriter toServer = new PrintWriter(new OutputStreamWriter(sout));
Send request as specified in arg1 to the server
and write whole page as a string broken up by newline character
toServer.print("GET " + arg1 + " HTTP/1.1\n");
toServer.print("Host: " + hostname + "\n\n");
toServer.flush();
for (s1 = null; (s1 = fromServer.readLine()) != null; ) {
s2 += s1 + "\n";
// close all connections
toServer.close();
fromServer.close();
s.close();
I do some other processing here but it's not relevant to the connection problem.
catch (UnknownHostException ue) {
System.out.println("UnknownHostException");
catch (IOException ie) {
System.out.println("GoogleConnector: IOException");
return hs; //can ignore this return statement
} // end getList
} // end GoogleConnector

Here's a working code sample to connect using a proxy server:
http://www.esus.com/docs/GetQuestionPage.jsp?uid=666
and don't forget, you can use the google web api's:
http://www.esus.com/docs/GetQuestionPage.jsp?uid=1570
Cheers

Get server health via SNMP get

Hello,
is it possible to get the health of a server (or deployment) in weblogic using snmpget?
All documentation and examples I found so far assume that a use traps.
I tried to walk over the bea tree once when a specific server is stopped and once when it is startet. But the only difference i found where some counters which have increased in the meantime.
Thanks in advance for your help.

There is no SNMP message that can be used to define a upper threshold for the connections that can be used to check the connection status. You can use a script that can automatically login and check the connections on your device or you can use some network management software for this.

Get BGP communities via SNMP

Hello all,
I'm trying to monitor BGP sessions, and I need to distinguish where I am getting routes from.
There are multiple sites advertising routes to our network and we use communities to identify them as a code number.
I'm able to get the received routes from a peer but not the community that the route comes with.
Is there a way to do that using SNMP?

There is no SNMP message that can be used to define a upper threshold for the connections that can be used to check the connection status. You can use a script that can automatically login and check the connections on your device or you can use some network management software for this.

Can't get internet connection via ethernet

I have had 3 computers, 1 pc and 2 Macs, networked through ethernet for two years. Never had problems until yesterday. We just can't get on the internet on the Macs. Both macs say "Your computer isn't connected." Talked to D-Link router, everything was fine. Macs recognize IP and all numbers, so they told us to call Apple. Any ideas?
Thanks.

Possibly:
reboot the macs.
check the cables.
reboot the router.
reboot the dsl/cable/whatever modem.
Are you getting a valid Ip ddress from the D-Link (192.168.xx.xx, or is it a 169.xxx.xxx.xxx?)
In Network utilities, can you ping an outside IP by name? Ping an outside site by IP by number? Ping the router IP? Ping the PC?
Reset Safari...

I have an HP LaserJet 8150N that I am trying to get connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer.

I have an HP LaserJet 8150N that I use for my work and I have had this printer for ever and it is one heck of a work horse! I am trying to get it connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer. I have tried to reconfigure the printer using the JetDirect menu giving it a new IP address but still no luck. If anyone could help me through this issue I would appreciate it.

moonlightcaravan wrote:
Second, seeing "connecting" and connection failed is normal. You must click on "Connect As" in the Finder window and then enter the username and password for the admin account on the other computer. That should fix things.
Thanks for responding.
When does clicking on "Connect As" happen in the process above?
After step six? Seven?
After the connection has failed?
Is this the FInder window that shows the icon of the computer you want to copy the file from?
You should see "Connect As" in the Finder near the top right of the window as shown below:
!http://blog.brothersoft.com/wp-content/uploads/2008/11/howto_copy_files_to_or_from_your_iphone02.jpg!

Interface errors (crc, in/output, collisions etc.) via snmp

Hi,
I'm trying to understand how to get interface errors via SNMP. I do get stats via SNMP for ifInErrors / ifOutErrors etc, but I'm trying to get output via SNMP for the errors visible via the 'sh int x' command - CRC errors, input / output errors, collisions, runts. giants etc.).
1) The SNMP ifInError / ifOutError seems to give an overall counter of all errors from the time the device has started - Am I correct about this?
2) Is there any way I can get the interface-specific errors noted above via SNMP?
Thanks,
Mario

Depends on the device and version of code, but most likely you will get what you want from the CISCO-IF-EXTENSION-MIB. Look at objects like cieIfInRuntsErrs, cieIfInGiantsErrs, and cieIfInFramingErrs. You will also get some ethernet-specific errors from the ETHERLIKE-MIB.

Get connected IPs via SNMP

Hi there, can someone tell me the OIDs needde to obtain a list of connected IP addresses and which port they are connected to? I understand that a list will appear for one port if that port itself is connected to another switch?
Thanks.

These procedures have been asked before in forum. Please use these links as reference which has information you're looking for :
https://supportforums.cisco.com/discussion/12090896/snmp-how-get-list-ip-addresses-and-corresponding-interface-names
https://supportforums.cisco.com/discussion/9675406/get-ip-addres-interface-snmp
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

How do I get the Username of an AnyConnect VPN session via SNMP?

I would like to monitor the usernames of my AnyConnect sessions via SNMP. This will allow me to monitor, graph, report, and alert using Solarwinds Orion (or any other SNMP software).
I would like to monitor this on my ASA 5520. I have run the show snmp-server oidlist command and I can see all of the OID's that I can poll. However, the OID I would like to poll crasUsername (1.3.6.1.4.1.9.9.392.1.3.21.1.1) is not working.
Does anyone know how I can monitor the username of a AnyConnect session via SNMP?
Below is a link to a great MIB reference for ASA Remote Access Monitor OID list.
http://www.mibdepot.com/cgi-bin/getmib3.cgi?i=1&n=CISCO-REMOTE-ACCESS-MONITOR-MIB&r=cisco&f=CISCO-REMOTE-ACCESS-MONITOR-MIB.my&v=v2&t=tree

Hello PDX,
Welcome to the HP Support Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Had a problem with my iPad 2 and took it into apple store to get it restored to factory settings. I now need to restore from iTunes but can't see my iPad when connected via USB, any ideas please?

Help !! I had a problem with my iPad 2 this morning which resulted in me taking into the apple store and them restoring it to factory settings. They advised me to restore all my apps etc from iTunes which I am trying to do, however once connected via the USB I cannot see it as a device on iTunes, and I keep getting the message on my laptop "the iPad cannot be used because it requires iTunes version 11.1 or later, go to iTunes.com/uk and download the latest version"
I cannot see what the version of iTunes is on my iPad and have gone into safari to try and download but not able to as it tells me iTunes is already loaded. I have the latest version on my laptop so I am stuck as to what to do next. Any suggestions please??

Hi there Paula120,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

Does anyone get the mouse lag with an external display connected via the display port?

does anyone get the mouse lag with an external display connected via the display port?

You don't describe the problem in great detail. Is this the issue you are describing?
https://discussions.apple.com/thread/4398076?start=0&tstart=0
If so, then, "Yes." I have the same problem. Note that this isn't a tracking speed problem for me, it's a lag between my hand moving and the pointer moving on the external display.
Andrew

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

How do I get the internet connection back onto ipad even though it connects to Wifi successfully and I have checked on my iPhone which does connect via the same wifi and to the internet?

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

Get PIX Connections via SNMP

Similar Messages

Maybe you are looking for